請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/44958
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 鄭榮和(Jung-Ho Cheng) | |
dc.contributor.author | Tzu-Ting Hsu | en |
dc.contributor.author | 徐子庭 | zh_TW |
dc.date.accessioned | 2021-06-15T03:59:29Z | - |
dc.date.available | 2012-04-02 | |
dc.date.copyright | 2010-04-02 | |
dc.date.issued | 2010 | |
dc.date.submitted | 2010-04-01 | |
dc.identifier.citation | [ ] Mark Hirschey, “What’s your strategy for the electric vehicle market?” Oliver Wyman, 2009
[ ] J. R. Hendershot, Jr., and T. Miller, Design of Brushless Permanent-Magnet Motors, Magna Physics Publishing, Hillsboro, OH, and Clarendon Press, Oxford, 1994. [ ] R. H. Staunton, S. C. Nelson, P. J. Otaduy, J. W. Mckeever, J. M. Bailey, S. Das, and R. L. Smith, “PM Motor Parametric Design Analyses for a Hybride Electric Vehicle Traction Drive Application,” United States ORNL/TM-2004/217 [ ] T. J. E. Miller, Brushless Permanent-Magnet and Reluctance Motor Drives. Oxford: Clarendon Press, 1989. [ ] Rukmi Dutta, “A Segmented Interior Permanent Magnet Synchronous Machine with Wide Field-Weakening Range,” School of Electrical Engineering and Telecommunications, August, 2007. [ ] P. Beckley, Electrical Steel for rotation motors. London: Institute of Electrical Engineers, 2002. [ ] W. L. Soong, D. A. Staton, and T.J.E. Miller, “Design of a New Axially-Laminated Interior Permanent Magnet Motor,” IEEE Transactions on Industry Application, Vol. 31, No. 2, pp. 358 – 367, March/April, 1995. [ ] T. M. Jahns, “Flux-Weakening Regime Operation of an Interior Permanent Magnet Synchronous Motor Drive,” IEEE Transactions on Industry Application, Vol. IA-23, No. , pp. 681 – 689, 1987. [ ] B. K. Bose, “A High-Performance Inverter-Fed Drive System of an Interior Permanent Magnet Synchronous Motor,” IEEE Transactions on Industry Application, Vol. 24, No.6, pp. 987 – 997, Nov/Dec, 1988. [ ] S. Morimoto, M. Sanada, and Y. Takeda, “Wide-Speed Operation of Interior Permanent Magnet Synchronous Motors with High-Performance Current Regulator,” IEEE Transactions on Industry Application, Vol. 30, No.4, pp. 920 – 926, July/August, 1994. [ ] T. M. Jahns, G. B. Kliman, and T.W. Neumann, “Interior Permanent-Magnet Synchronous Motors for Adjustable-Speed Drives,” IEEE Transactions on Industry Application, Vol. IA-22, No.4, pp. 738 – 747, July/August, 1986. [ ] L. Zhong, “High Performance Torque and Field Weakening Controllers for Interior Permanent Magnet Synchronous Motors,” PhD Thesis, School of Electrical Engineering and Telecom, University of New South Wales, 1999. [ ] M. E. Haque, L. Zhong, and M. F. Rahman, “A sensorless speed estimator for application in a direct torque controller of an interior permanent magnet synchronous motor drive, incorporating compensation of offset error,” 2002 Vol. 1, pp. 276-281. [ ]R. S. MacMinn and T. M. Jahns, “Control Technique for Improved High Speed Performance of Interior PM Synchronous Motor Drives,” IEEE Transactions on Industry Application, Vol. 27, No.5, pp. 997 – 1001, September/October, 1991. [ ] Z. Rahman, K. L. Butler, and M. Ehsani, “Effect of Extended-Speed, Constant Power Operation of Electric Drives on the Design and Performance of EV-HEV Propulsion System,” in Future Car Congress. Arlington, Virginia, USA, 2000. [ ] G. R. Slemon, “Achieving a Constant Power Speed Range for PM Drives,” IEEE Transactions on Industry Application, Vol. 31, No.2, pp. 368 – 372, March/April, 1995. [ ] E. C. Lovelace, T. M. Jahns, J. L. K. Jr., and J. H. Lang, “An Interior PM Starter/Alternator for Automotve Application,” in International Conference on Electric motors. Istanbul, Turkey, 1998. [ ] R. Schiferl and T. A. Lipo, “Power Capability of Salient Pole Permanent Magnet Synchronous Motor in Variable Speed Drive Applications,” IEEE Transactions on Industry Application, Vol. IA-26, No.1, pp. 114 – 123, 1990. [ ] W. L. Soong and T. J. E. Miller, “Field-weakening performance of brushless synchronous AC motor drives,” Electric Power Applications, IEE Preceedings, Vol. 141, No. 6, pp. 331-340, 1994. [ ] B. Stumberger, M. Anton Hamler, M. Trlep, and M. Jesenik, “Analysis of Interior Permanent Magnet Synchronous Motor Designed for Flux Weakening Operation,” IEEE Transaction on Magnetic, Vol. 37, No. 5, pp. 3644-3647, September, 2001. [ ] R. Dutta and M. F. Rahman, “A New Rotor Design of IPM Motor Suitable for Wide Speed Range,” in The 29th Annual Conference of the IEEE Industrial Electronics Society (IECON 2003). Roanoke, Virginia, USA, 2003. [ ] S. Morimoto, Y. Takeda, T.Hirasa, and K. Taniguchi, “Expansion of Operating Limits for Permanent Magnet Motor by Current Vector Control Considering Inverter Capacity,” IEEE Transactions on Industry Application, Vol. 26, pp. 866 – 871, 1990. [ ] Y. Honda, T. Nakamura, T. Kigaki, and Y. Takeda, “Motor Design Considerations and Test Results of an Interior Permanent Magnet Synchronous Motor for Electric Vehicles,” in Proc. IEEE IAS Annual Meeting, 1997, pp 75 [ ] Y. Honda, H. Murakami, N. Kazushige, T. Higaki, S. Morimoto, and Y. Takeda, “Optimum Design of a Multilayer Interior Permanent Magnet Synchronous Motor Using Reluctance Torque,” IEE , Vol. 127, No. 1, 1999 [ ] Munehiro Kamiya, “Development of Traction Drive Motors for the Toyota Hybrid System.” [ ] Mehrdad Ehsani, Khwaja M. Rahman, and Hamid A. Toliyat, “Propulsion System Design of Electric and Hybrid Vehicles,” IEEE Transactions on Industrial Electronics, Vol. 44, No.1, Febuary, 1997. [ ] M. Ehsani, Y. Gao, and S. Gay, 'Characterization of Electric Motor Drives for Traction Applications,' Roanoke, VA, United States, 2003, pp. 891-896. [ ] Masao Yabumoto, Chikara Kaido, Takeaki Wakisaka, Takeshi Kubota, Noriyuku Suzuki, “Electrical steel sheet for traction motors of hybrid/ electric vehicles,” Nippon Steel Technical Report No. 87, July 2003. [ ] J.F. Gieras, E. Santini, and M. Wing, “Calculation of synchronous reactances of small permanent-magnet alternating-current motors: comparison of analytical approach and finite element method with measurements,” Magnetics, IEEE Transactions on, Vol. 34, No. 5, pp. 3712 – 3720, 1998. [ ] P. Campbell, Permanent magnet materials and their application. Cambridge [England]; New York: Cambridge University Press, 1994. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/44958 | - |
dc.description.abstract | 目前,世界各國政府和各大車廠皆積極投入電動車相關技術的開發,以及充電站等基礎建設。然而,目前電動車所搭載的能量密度太低,價格太高,因此距離大眾市場的普及仍然有相當大的空間改善。本研究的目標係設計電動車專用的驅動馬達,Green Jumper 這輛純鋰電池電動車是由台達電和台大機械Formosun團隊共同開發。
IPM 馬達因使用了高能量密度的稀土族磁鐵,和弱磁的控制,因此有高功率密度和較寬的高速定功率區之優點,因此本研究是以IPM的馬達做為設計研究之目標。IPM馬達的轉子是馬達設計的核心技術,亦即磁鐵擺放形狀的設計,因此本研究將設計的焦點放在嵌入轉子內的磁鐵擺置設計上。 本研究中的磁鐵擺放設計目的是為了以最少的磁鐵用量達到最大的扭力輸出能力,希望藉此可以降低IPM馬達的材料成本。Toyota Prius ‘03的馬達設計是將磁鐵擺置為V型,此種設計的目的是考量了製造成本和磁阻扭力的最大化。因此本研究是以V型設計為基礎,提出設計改良。以相同用量的磁鐵,擺置為U型設計,希望能夠有效提高磁鐵磁通鏈的利用率,增加磁鐵扭力的成分,進而提升整體扭力輸出的效果。利用有限元素分析軟體的計算,可以得到U型設計跟V型設計比較,確實能夠提升最終扭力輸出的大小,並且主要是來自於磁鐵扭力的貢獻。因此,在本研究中所設計的IPM馬達是以U型設計為主,並進一步製造最終的馬達設計,以及測試驗證。 從實際測試的結果可以驗證模擬計算的準確度,因而推斷U型的擺放方式確實可以比V型設計提升扭力輸出的能力,亦即,以較少量的磁鐵達到相同的性能目標,降低最終所使用的材料成本。 | zh_TW |
dc.description.abstract | The objective of this work is to design a high-performance traction motor for a battery electric vehicle “Green Jumper” engineered in National Taiwan University. An important challenge of traction motor design for electric vehicle is to meet the requirements of different types of electric vehicles and of easy-to-construct configuration that can contribute to the overall cost reduction for the electric vehicle.
The interior permanent magnet (IPM) synchronous motor is the natural choice of such niche applications because of their higher efficiency, compact size and achieving constant-power operation over a wide speed range with limited magnet strength requirement. However, the cost of magnet material is high compared with the cost of the other materials used in electric motor, and design attributes that minimize the required amount of magnet material are important challenge for high-performance motor design. The placement of the embedded permanent magnet is developed for the optimized design of high-performance IPM motor. The IPM motor with segmented magnet is first investigated in terms of its field weakening capability. Furthermore, this thesis proposed a design with permanent magnets being embedded in the U-shape flux barrier compared to the V-shape flux barrier of TOYOTA Prius. The comparisons of the average torque and no-load back EMF are given. The results of the motor performance comparisons are based on comprehensive use of finite element analysis tools (JMAG-Studio). From the FEA results, it shows that the U-shape flux barrier proposed in this work has better torque capability than the V-shape flux barrier adopted in TOYOTA Prius; that is, for a given torque, the design with U-shape flux barrier can yield a smaller motor with less amount of magnet and contribute to the overall reduction of the material cost. A prototype motor was constructed on the basis of the final optimized design. The no-load back EMF and the torque performance were measured and compared with the predicted results for experimental verification. Finally, the measured performance analysis was found to closely match with the predicted results. | en |
dc.description.provenance | Made available in DSpace on 2021-06-15T03:59:29Z (GMT). No. of bitstreams: 1 ntu-99-R97522532-1.pdf: 17072644 bytes, checksum: 01aa4faaf2be9c37685d98648f320f56 (MD5) Previous issue date: 2010 | en |
dc.description.tableofcontents | ACKNOWLEDGEMENT IV
摘要 VI ABSTRACT VIII TABLE OF CONTENTS X LIST OF FIGURES XIV LIST OF TABLES XVII CHAPTER 1 2 INTRODUCTION 2 1.1 RESEARCH OBJECTIVES 4 1.1.1 System Layout of Green Jumper 5 1.2 RESEARCH BACKGROUND 7 1.3 RESEARCH METHODOLOGY 8 1.4 THESIS ORGANIZATION 10 CHAPTER 2 11 ELECTRIC MOTOR TECHNOLOGY OVERVIEW 11 2.1 BRUSHLESS PM MOTOR 11 2.2 SURFACE MOUNT PM MOTOR 13 2.2.1 Interior Rotor 13 2.2.2 Exterior Rotor 16 2.3 IPM MOTOR 17 2.4 INDUCTION MOTOR 18 2.5 SWITCHED RELUCTANCE MOTOR 19 2.6 SUMMARY 20 CHAPTER 3 22 INTERIOR PERMANENT-MAGNET MOTOR TECHNOLOGY OVERVIEW 22 3.1 INTRODUCTION 22 3.2 MAGNETIC MATERIAL 23 3.2.1 Permanent Magnet Material 23 3.2.2 Electrical Steel 28 3.3 ROTOR CONFIGURATION OF THE IPM MOTOR 29 3.4 CHARACTERISTICS OF THE IPM MOTOR 32 3.4.1 Two axes theory of the IPM Motor 32 3.4.2 Basic Control of the IPM Drive 36 3.5 FLUX-WEAKENING AND CONSTANT POWER OPERATION 40 3.5.1 Principle of flux weakening in the IPM Motor 42 3.5.2 Optimal Flux Weakening Conditions 44 3.5.3 Practical Limitations and Factors 47 3.6 OPTIMUM DESIGN OF EMBEDDED MAGNET PLACEMENT 48 3.6.1 IPM Motor with Segmented Magnets 49 3.6.2 IPM Motor with Multilayer Magnets 51 3.6.3 IPM Motor with V-Shape Magnets 52 3.7 CONCLUSION 53 CHAPTER 4 55 DESIGN AND ANALYSIS OF THE IPM MOTOR 55 4.1 INTRODUCTION 55 4.2 SPECIFICATIONS OF EV POWERTRAIN SYSTEM DESIGN 57 4.2.1 System Design Constraint 57 4.2.2 System Design Variable 58 4.2.3 Road Load Characteristic 58 4.2.4 System Design for Green Jumper 60 4.3 OPTIMUM DESIGN OF ROTOR CONFIGURATION 64 4.3.1 Embedded Permanent Magnet Placement 64 4.4 MAGNETIC DESIGN 71 4.4.1 Combination of slots and poles 71 4.4.2 Selection of Permanent Magnet Material 72 4.4.3 Selection of Rotor Core Material 73 4.4.4 The length of Magnet Segments and Iron Bridges 76 4.5 PARAMETER STUDY AND DISCUSSION 78 4.5.1 The Back-EMF Constant and Magnet Flux Linkage 79 4.5.2 Torque Analysis 80 4.5.3 The d- and q-axis Inductances 82 4.5.4 Demagnetization Analysis 82 4.6 CONCLUSION 87 CHAPTER 5 88 MOTOR DESIGN VERIFICATION 88 5.1 PROTOTYPE CONSTRUCTION 88 5.2 EXPERIMENT SET UP 90 5.3 BENCHMARKING TESTS OF MOTOR FOR GREEN JUMPER 94 5.3.1 Back-EMF Test 94 5.3.2 Torque Capability Test 95 5.4 CONCLUSION 96 CHAPTER 6 97 CONCLUSIONS AND RECOMMENDATIONS 97 BIBLIOGRAPHY 99 | |
dc.language.iso | en | |
dc.title | 電動車31kW內置磁石永磁同步馬達設計研究 | zh_TW |
dc.title | Development of 31kW Interior Permanent-Magnet Synchronous Motor for Electric Vehicles | en |
dc.type | Thesis | |
dc.date.schoolyear | 98-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 黃明熙(Ming-Shi Huang),許宏成(Eric H. Sheu) | |
dc.subject.keyword | 鋰電池電動車,IPM馬達,永久磁石,磁鐵擺置設計, | zh_TW |
dc.subject.keyword | battery electric vehicle,IPM motor,embedded permanent magnet, | en |
dc.relation.page | 119 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2010-04-01 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-99-1.pdf 目前未授權公開取用 | 16.67 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。