請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/44864
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 林晃巖(Hoang-Yan Lin) | |
dc.contributor.author | Yu-Ling Kang | en |
dc.contributor.author | 康譽齡 | zh_TW |
dc.date.accessioned | 2021-06-15T03:56:48Z | - |
dc.date.available | 2016-08-22 | |
dc.date.copyright | 2011-08-22 | |
dc.date.issued | 2011 | |
dc.date.submitted | 2011-08-18 | |
dc.identifier.citation | [1] 中華民國國家標準局,「戶外景觀照明燈具」 ,經濟部檢驗局 (2006).
[2] LED照明推進協議會,「LED照明手冊」 ,全華圖書股份有限公司, 19-31 (2010). [3] 鑫源盛科技股份有限公司, http://www.ttic-tech.com.tw.(2011/07) [4] 佰鴻工業股份有限公司, http://www.brtled.com. (2011/07) [5] 新強光電股份有限公司, http://www.neobulb.com. (2011/07) [6] 陽傑科技, http://www.atdi-web.com. (2011/07) [7] 沛鑫半導體, http://www.foxsemicon.com.tw. (2011/07) [8] 安提亞, http://www.anteya.com. (2011/07) [9] 陳聖文,「LED路燈之光學透鏡設計」 ,國立臺灣科技大學 (2009). [10] 李碩重,「照明設計學」 ,全華科技圖書股份有限公司, 13-26 (2007). [11] 'Road lighting,' CEN prEN 13201, part1-part3 (2003). [12] 北京照明學會照明設計專業委員會,「照明設計手冊」 ,中國電力出版社, 443-458 (2008). [13] 郗書堂,「路燈」 ,中國電力出版社, 129-140 (2008). [14] 劉元斌,「道路照明優化設計與效益評估之研究」 ,國立臺灣科技大學 (2008). [15] 經濟部,「道路照明工程標準」 ,中華民國經濟部 (1986). [16] Y. Ding, X. Liu, Z. R. Zheng, and P. F. Gu, 'Freeform LED lens for uniform illumination,' Optics Express 16, 12958-12966 (2008). [17] Z. R. Zheng, X. Hao, and X. Liu, 'Freeform surface lens for LED uniform illumination,' Applied Optics 48, 6627-6634 (2009). [18] Fei Chen, S. L., Kai Wang, Zongyuan Liu, and Xiaobing Luo, 'Free-form lenses for high illumination quality light-emitting diode MR16 lamps,' Opt. Eng. 48, 123002 (2009). [19] 周志敏,「LED照明與工程設計」 ,人民郵電出版社, 129-141 (2010). [20] 山東照明學會,「實用照明設計」 ,機械工業出版社, 120-121 (2010). [21] 日本照明學會,「照明手冊」 ,全華科技圖書股份有限公司, 455-456 (2006). [22] 中華民國國家標準局,「道路照明」 ,經濟部檢驗局 (2006). [23] 楊光,「大功率發光二級管路燈配光方案」 ,光源與照明期刊(2009) [24] 張學智,「LED路燈設計」 ,工業技術研究院(2009) [25] 李林,「現代光學設計方法」 ,北京理工大學出版社, 226-227 (2009). [26] 鄧吉平,「 LED道路照明燈具配光設計的誤區分析」 ,中國道路照明論壇論文集 (2010) | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/44864 | - |
dc.description.abstract | 根據實際的道路規格,設計光學元件,讓LED的光經過該光學元件後能夠在道路上形成均勻照明,並且能夠符合道路規範。一般LED的光強分布為Lambertian,由於道路為長方形,若是單純設計對稱型的光學元件只能讓目標面圓形區域內達到均勻照明,將使部分光照在道路外圍造成不必要的浪費,甚至會造成環境光害、眩光產生交通事故等等的問題。所以本文設計非對稱透鏡並配合反射板,使路燈發出的光在平行於行車方向與垂直於行車方向為不同的配光分布,因而達到長方型區域內均勻照明。最後進行實際道路照明的模擬,確認其照明結果能夠符合道路照明規範。 | zh_TW |
dc.description.abstract | Based upon the practical specifications of street illumination, we design the secondary optical elements so that the LED illumination can be transformed into a uniform illumination on the road to meet the street illumination standards. Generally, LED light intensity distribution is Lambertian, however, the geometry of the road area are rectangular. Therefore, traditionally symmetric design of an original LED lens can only produce uniform illumination on a circular area. A major portion of light will fall outside the street and will results in unnecessary power consumption, environmental light pollution, the glare issues, and even traffic accidents, etc. Consequently, the lens design should be asymmetric in order that the emitted light can be distributed uniformly in the directions parallel and perpendicular to the driving direction and thus can achieve uniform illumination within the rectangular area of the road. In this thesis, free-form lens and reflector are developed to create a batwing light intensity distribution in the direction parallel to the driving direction and asymmetrical intensity distribution in perpendicular direction to create a rectangular light pattern and achieve high efficiency of uniform illumination. Finally, our simulations validate their compliance with the street lighting specifications. | en |
dc.description.provenance | Made available in DSpace on 2021-06-15T03:56:48Z (GMT). No. of bitstreams: 1 ntu-100-R98941061-1.pdf: 4252197 bytes, checksum: e1e1fcf71979340656f84c68e43d32bf (MD5) Previous issue date: 2011 | en |
dc.description.tableofcontents | 誌謝 i
中文摘要 ii ABSTRACT iii 目錄 iv 圖目錄 vii 表目錄 xi Chapter 1 緒論 1 1.1 研究動機 3 1.2 論文架構 8 Chapter 2 LED路燈照明概論 11 2.1 基本光學原理 12 2.1.1 光的折射 12 2.1.2 光的全反射 13 2.1.3 反射與散射 13 2.2 光度學 15 2.3 道路照明 17 2.3.1 道路分類 17 2.3.2 道路照明指標 19 2.3.3 道路照明規範 25 Chapter 3 光學設計原理 32 3.1 自由曲面計算方法 32 3.2 光學設計與模擬介紹 34 3.2.1 LightTools介紹 34 3.2.2 非成像光學模擬方法與原理 35 3.2.3 多個參數優化 37 3.3 道路模擬軟體介紹 39 Chapter 4 LED路燈初步設計 41 4.1 規格計算 43 4.2 LED光源選擇 47 4.3 透鏡設計與模擬 50 4.3.1 初始值選取 55 4.3.2 圓形區域照度均勻 68 4.3.3 長方形均勻照明 78 Chapter 5 LED路燈設計 90 5.1 無反射板之路燈設計 90 5.1.1 道路照度均勻 90 5.1.2 道路輝度均勻 96 5.1.3 道路照明模擬 99 5.2 加入反射板之路燈設計 103 5.2.1 道路照度均勻 103 5.2.2 道路輝度均勻 107 5.2.3 道路照明模擬 110 Chapter 6 結論與未來展望 113 REFERENCES 118 | |
dc.language.iso | zh-TW | |
dc.title | LED 路燈之光學系統設計 | zh_TW |
dc.title | Optical Design of LED Street Lamps | en |
dc.type | Thesis | |
dc.date.schoolyear | 99-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 徐進成(Jin-Cherng Hsu),黃鼎偉(Ding-Wei Huang) | |
dc.subject.keyword | LED路燈,自由曲面透鏡,反射板, | zh_TW |
dc.subject.keyword | Street lighting,free-form lens,reflector, | en |
dc.relation.page | 134 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2011-08-18 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 光電工程學研究所 | zh_TW |
顯示於系所單位: | 光電工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-100-1.pdf 目前未授權公開取用 | 4.15 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。