請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/43757
標題: | 使用CMOS積體電路製程設計30兆赫感測系統中的溫感電路 Thermal Sensing Circuit for 30 THz Sensing System Using CMOS Process |
作者: | Sin-Han Yang 楊星瀚 |
指導教授: | 莊晴光(Ching-Kuang C. Tzuang) |
關鍵字: | 互補式金氧半,兆赫波,溫度感測,空間響應分布,紅外線, CMOS,terahertz,thermal sensor,spatial response,infrared, |
出版年 : | 2009 |
學位: | 碩士 |
摘要: | 使用0.18微米CMOS製程設計兆赫波感測系統。因為製程中最大增益頻率的不足,我們使用測輻射熱儀的方式設計這個系統。
設計了一個溫度感測電路在CMOS製程,替換了需要特殊材料的測輻射熱儀。在這感測系統中,天線接收了兆赫波的能量,經由匹配的負載吸收轉換成熱能。隨之升高的溫度再經由溫度感測電路的偵測轉換成電壓的輸出。因此,我們可以偵測兆赫波的信號。 在這論文中,展現了10.6微米波長的天線設計。示範了使用有線元素法軟體進行熱的分析。設置了一個量測的環境。 最後我們得到了兩張空間響應分布圖,分別是使用垂直極化波和水平極化波入射。可從中看出天線和不同結構金屬對兆赫波能量的吸收程度。 We design a THz sensing system using 0.18 micron CMOS process. Here we use the bolometer approach because the maximum gain frequency of 0.18 micron CMOS is not enough for micron wavelength detector. A thermal sensor is designed in CMOS process to replace the bolometer in other process. THz signal is received by an antenna and the power of THz beam is translated to heat by a matched load. The thermal sensor senses the change of temperature and output a respond voltage level. Therefore, the THz signal is obtained. In this report, the design of antenna in 10.6 micron wavelength is shown and the thermal analysis using FEM software is demonstrated. The measurement environment is setup. Finally, two pictures of spatial response in horizontal polarization and vertical polarization are got. The absorbing ability of THz wave in antennas and different metal structure can be seen. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/43757 |
全文授權: | 有償授權 |
顯示於系所單位: | 電信工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-98-1.pdf 目前未授權公開取用 | 6.31 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。