請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/43422
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 韋文誠 | |
dc.contributor.author | Lin Chun-Chieh | en |
dc.contributor.author | 林浚傑 | zh_TW |
dc.date.accessioned | 2021-06-15T01:55:50Z | - |
dc.date.available | 2010-07-30 | |
dc.date.copyright | 2009-07-30 | |
dc.date.issued | 2009 | |
dc.date.submitted | 2009-06-28 | |
dc.identifier.citation | [1] M. R. Opitz, K. Albetsen, J. J. Beeson, D. F. Hennings, J. L. Routbort, and C. A.
Randall, “Kinetic process of reoxidation of base metal technology BaTiO3-based multilayer capacitors,” J. Am. Ceram. Soc., 86[11] 1879-84 (2003) [2] Bang-Ying Yu and Wen-Cheng J. Wei, “Defect of base metal electrode layers in multi-layer ceramic capacitor,” J. Am. Ceram. Soc., 88[8] 2328-31 (2005) [3] 吳朗, “電工學,”全華圖書 [4] G. Arlt, D. Hennings, and G. de With, “Dielectric properties of fine-grained barium Titanate,” J. Appl. Phys., 58 1619-25 (1985) [5] C. H. Chen, W. H. Lee and W. C. J. Wei, “Sintering behavior and interfacial analysis of Ni/Cu electrode with BaTiO3 Particles,” J. Electroceam., 14 25 - 36 (2005) [6] R. Ueyama, K. Koumoto, and K. Kuribayashi, “Influence of preparation methods of Ni powder and amount of BaTiO3 additives on sintering properties of Ni internal electrode films,” J. Ceram. Soc. Jpn., 110[7] 676-680 (2002) [7] R. Ueyama, K. Koumoto, and K. Kuribayashi, “Dependence of sintered electrode Ni paste on dispersed Ni paste and Ni powder properties,” J. Ceram. Soc. Jpn., 109[5] 447-452 (2001) [8] R. Ueyama, K. Koumoto, and K. Kuribayashi, “Dependence of electrode Ni paste on the amount of added BaTiO3 powder,” J. Ceram. Soc. Jpn., 109[4] 351-354 (2001) [9] 宋志剛,”鎳電極與[(Ba1-XCaX)O]m[(Ti1-YZrY)O2]介電材料在還原氣氛中燒結時之相互作用,”行政院國家科學委員會研究計畫成果報告,民國91年 [10] I. Burn and G. H. Maher, “High resistivity BaTiO3 ceramics sintered in CO-CO2 atmospheres,” J. Mat. Sci., 10 633-640 (1975) [11] D. H. Im, S. H. Hyun, S. Y. Park, B. Y. Lee, and Y. H. Nim, “Preparation of Ni paste using binary powder mixture for thick film electrodes,”Mat. Chem. Phys., 96 228-233 (2006) [12] T. Nakamura, “Multilayer ceramic capacitor,” US patent 6,979,486 B2, Dec. 27, 2005, assignee Taiyo Yuden Co., Ltd. [13] 黃坤祥,“粉末冶金學,”中華民國粉末冶金協會,民國92年 [14] H. Hyuga, Y. Hayashi, T. Sekino, and K. Niihara, “Fabrication process and electrical properties of BaTiO3/Ni nanocomposite,” Nanostructured Materials, 9 547-550 (1997) [15] H. J. Hwang, M. Toriyama, T. Sekino, and K. Niihara, “In-situ fabrication of ceramic/metal nanocomposites by reduction reaction in barium titanate- metal oxide system,” J. Eur. Ceram. Soc., 18 2193-2199 (1998) [16] 陳旭昇及段維新,”鈦酸鋇摻雜金屬鎳對顯微結構及定性的影響,”中國材料年 會論文集2007 [17] S. Sumita, M. Ikeda, Y. Nakano, K. Nishiyama, and T. Nomura, “Degradation of multilayer ceramic capacitors with nickel electrodes,” J. Am. Ceram. Soc., 74 [l l] 2739-46 (1991) [18] G. Y. Yang, E. C. Dickey, C. A. Randall, D. E. Barber, P. Pinceloup, M. A. Henderson, R. A. Hill, J. J. Beeson, and D. J. Skamser, “Oxygen non-stoichiometry and dielectric evolution of BaTiO3. Part I—improvement of insulation resistance with reoxidation,” J. Appl. Phys., 96[12], 7492-99 (2004) [19] G. Y. Yang, G. D. Lian, E. C. Dickey, C. A. Randall, D. E. Barber, P. Pinceloup, M. A. Henderson, R. A. Hill, J. J. Beeson, and D. J. Skamser,” Oxygen non-stoichiometry and dielectric evolution of BaTiO3. Part II—insulation resistance degradation under applied dc bias, “J. Appl. Phys., 96[12] 7500-08 (2004) [20] Y. M. Chiang, D. Birnie III, and W. D. Kingery, Physical Ceramics, J. Wiley, New York, NY, USA, 1997 [21] J. Weiss, “Oxidizing heat treatment of nickel embedded in barium titanate ceramics: kinetics and mechanism of the metal oxidation,” J. Mat. Sci., 23 2195-2204, 1988 [22] K. Albetsen, “Re-oxidation of Ni-MLCs,” J. Euro. Ceram. Soc., 24 1883-87 (2004) [23] K. H. Lee, Y. C. Wu and H. Y. Lu, “Interface microstructure between Ni base-metal electrode and BaTiO3 dielectric,” J. Appl. Phys. D, 40 4902-09 (2007) [24] H. V. Atkinson, “Evolution of grain structures in nickel oxide scales,” Oxidation of Metals, 28 Nos. 5/6 (1987) [25] M. G. Fontana, Corrosion Engineering, McGraw-Hill, New York (1986) [26] N. Birk and G. H. Meier, Introduction to high temperature oxidation of metals, Edward Arnold Ltd, London, first published in 1983 [27] G. Tatlock and S. Newcomb, Microscopy of oxidation, Science reviews, 1999 [28] R. M. German, Liquid phase sintering, Plenum Press, New york, 1985 [29] R. M. German, Sintering theory and practice, A Wiley-Interscience publication, New York, 1996 [30] A. Mortensen, “Kinetics of densification by solution-reprecipitation,” Acta Mater, 45[2] 749-758 (1997) [31] C. A. Randall, S. F. Wang, D. Laubscher, J. P. Dougherty, and W. Huebner, “Structure property relationship in core-shell BaTiO3-LiF ceramics,” J. Mater. Res., 8[4] 871-879 (1993) [32] S. F. Wang, C. K. Thomas, Y. R. Wang, and Y. Kuromitsu, “Effect of glass composition on the densification and dielectric properties of BaTiO3 ceramics,” Ceram. Inter., 27 157-162 (2001) [33] J. S. Park and Y. H. Han, “Nano size BaTiO3 powder coated with silica,” Ceramics International, 31 777-782 (2005) [34] R. Z. Chen, A. Cui, X. H. Wang, Z. L. Gui, and L. T. Li, “Structure, sintering behavior and dielectric properties of silica-coated BaTiO3,” Materials letters, 54 314-317 (2002) [35] X. X. Wang, H. L. Chan, G.. K. H. Pang, and C. L. Choy, “Semiconducting barium titanate ceramics prepared by using yttrium hexaboride as sintering aid,” Material Science and Engineering, B100 286-291 (2003) [36] M. Valant, D. Suvorov, R. C. Pullar, K. Sarma, and N. M. Alford, “A mechanism for low-temperature sintering,” J. Europ. Ceram. Soc., 26 2777-2783 (2006) [37] L. Zhou, Z. Jiang, and S. Zhang, “Electrical properties of Sr0.7Ba0.3TiO3 ceramics doped with Nb2O5, 3Li2O-2SiO2, and Bi2O3,” J. Am. Cera. Soc., 74[11] 2925 - 27 (1991) [38] 鍾翰揚,鄭煜昇,方滄澤,裴修祥, “添加(Ba0.5Ca0.5)SiO3對X8R鈦酸鋇介電陶瓷 之介電性質及顯微結構影響之研究,”中國材料年會(2007) [39] T. Surumi, H. Adachi, H. Kakemoto, S. Wada, Y. Mizuno, H. Chazono, and H. Kishi, “Dielectric properties of BaTiO3-based ceramics under high electric field,” Jpn. J. Appl. Pys., 41 6929-33 (2002) [40] D.E. Rase and R. Roy, J. Am. Ceram. Soc., 38[3] 111 (1955) [41] D.E. Rase and R. Roy, J. Am. Ceram. Soc., 38[11] 393 (1955) [42] M. A. Zubair and C. Leach, “The influence of cooling rate and SiO2 additions on the grain boundary structure of Mn-doped PTC thermistor,” J. Europ. Ceram. Soc., 28 1845-55 (2008) [43] C. J. Lin and W. C. J. Wei, “Grain boundary pinning of polycrystalline Al2O3 by Mo inclusions,” Mater. Chem. Phys., 11 82-86 (2008) [44] J. Muñoz Saldaña, B. Mullier, and G. A. Schneider, “Preparation of BaTiO3 single crystals by using the modified SiO2 -exaggerated grain growth method,” J. Eur. Ceram. Soc., 22[5] 681-688 (2002). [45] S. Y. Choi, S. Y. Chung, and S. J. L. Kang, “Abnormal grain growth and intergranular amorphous film formation in BaTiO3,” J. Am. Ceram. Soc., 90 645-648 (2007) [46] S. Y. Choi, D. Y. Yoon, and S. J. L. Kang, “Kinetic formation and thickening of intergranular amorphous films at grain boundaries in barium titanate” Acta Mater., 52 3721-3726 (2004) [47] J. G. Fisher, S. Y. Choi, and S. J. L. Kang, “Abnormal grain growth in barium titanate doped with alumina,” J. Am. Ceram. Soc., 89[7] 2206-2212 (2006) [48] A. Yamaji, E. Enomoto, K. Kinoshita, and T. Murakami, “Preparation, characterization, and properties of Dy-doped small-grained BaTiO3 ceramics,” J. Am. Ceram. Soc., 60 97-101 (1977) [49] X. Xu and G. E. Hilmas, “Effects of Ba6Ti17O40 on the dielectric properties of Nb-doped BaTiO3 ceramics,” J. Am. Ceram. Soc., 89[8] 2496-2501, (2006) [50] H. Y. Lu, J. S. Bow, and W. H. Deng, “Core-shell structures in ZrO2-modified BaTiO3 ceramic,” J. Am. Ceram. Soc., 73[12] 3562-68 (1990) [51] H. Kishi, Y. Mizuno, and H. Chazono, “Base-metal electrode-multilayer ceramic capacitors: past, present, and future perspective,” Jpn. J. Appl. Phys., 42 1-15 (2003) [52] H. Chazono and H. Kishi, “Sintering characteristics in the BaTiO3-Nb2O5-Co3O4 ternary system: II, Stability of so-called “core-shell” structure,” J. Am. Ceram. Soc., 83[1] 101-106 (2000) [53] D. Makovec, Z. Samardzija, and M. Drofenik, “The solubility of Holmium in BaTiO3 under reducing conditions,” J. Am. Ceram. Soc., 89[10] 3281-84 (2006) [54] C. Metzmacher and K. Albertsen, “ Microstructural investigations of Barium Titanate-Based Material for base metal electrode ceramic multilayer capacitor,” J. Am. Ceram. Soc., 84[4] 821-26 (2001) [55] Q. Feng, C. J. McConville, and D. D. Edwards, “Effect of oxygen partial pressure on the dielectric properties and microstructures of cofired base-metal- electrode multilayer ceramic capacitors,” J. Am. Ceram. Soc., 89[3] 894-901 (2006) [56] D. E. Mccauley, M. S. H. Chu, and M. H. Megherhi, “PO2 dependence of the diffuse-phase transition in base metal capacitor dielectrics,” J. Am. Ceram. Soc., 89[1] 193-201 (2006) [57] C. S. Chen, C.C. Chou, and I. N. Lin, “Microstructure of X7R type base-metal- electroded BaTiO3 capacitor materials co-doped with MgO/Y2O3 additives,” J. of Electroceramics, 13 567-571 (2004) [58] C. S. Chen, C.C. Chou, W. C. Yang and I. N. Lin, “Microwave sintering of base-metal-electroded BaTiO3 capacitor materials co-doped with MgO/Y2O3 additives,” J. of Electroceramics, 13 573-577 (2004) [59] C. S. Chen, C.C. Chou, and I. N. Lin, “Microstructure of X7R type base-metal- electroded BaTiO3 capacitor materials prepared by duplex-structured process,” J. Eur. Soc., 25 2743-47 (2005) [60] K. Yasukawa and M. Nishimura, “Core-shell structure analysis of BaTiO3 ceramics by synchrotron X-ray diffraction,” J. Am. Ceram. Soc., 90[4] 1107-1111 (2007) [61] Y. S. Jung, E. S. Na, U. Paik, J. Lee, and J. Kim, “A study on the phase transition and characteristics of rare earth elements doped BaTiO3,” Materials Research Bulletin, 37 1633-40 (2002) [62] S. Wang, S. Zhang, X. Zhou, B. Li, and Z. Chen, “Investigation on dielectric properties of BaTiO3 co-doped with Ni and Nb,” Materials Letter, 60 909-911 (2006) [63] S. Wang, S. Zhang, X. Zhou, and B. Li, Z. Chen, “Influence of sintering atmosphere on the microstructure and electrical properties of BaTiO3-based X8R materials,” J. Mater. Sci., 41 1813-1817 (2006) [64] D. F. Hennings, “Dielectric materials for sintering in reducing atmospheres,” J. Euro. Ceram. Soc., 21 1637-42 (2001) [65] H. J. Hagemann and D. F. Hennings, “Reversible weight change of acceptor – doped BaTiO3,” J. Am. Ceram. Soc., 64[10] 590-594 (1981) [66] D. K. Lee, H. I. Yoo, and K. D. Becker, “Nonstoichiometry and defect structure of Mn-doped BaTiO3,” Solid State Ionic, 154-155 189-93 (2002) [67] X. Wang, M. G.u, B. Yang, S. Zhu, and W. Cao, “Hall effect and dielectric properties of Mn-doped barium titanate,” Microelectronic Engineering, 66 855-859 (2003) [68] S. I. Osawa, A. Furusawa. and N. Fujikawa, “Effect of manganese valence state on the electrical conductivity of barium titanate,” J. Am. Ceram. Soc., 76[5] 1191-94 (1993) [69] D. B. Park and N. H. Cho, “Chemical and structural features of the grain boundaries in semiconducting BaTiO3 ceramics prepared from surface-coated powders,” Solid State Ionic, 154-155 407-412 (2002) [70] M. W. Barsoum, Fundamentals of Ceramics, Int. Ed., 2000, McGraw-Hill Education. [71] W. C. Hahn, Jr., and A. Muan, Am. J. Sci., 73 258 (1960) [72] J. White, D. D. Howatt, and R. Hay, J. Roy. Tech. Coll, 3 239 (1933-36) [73] A. Muan, Am. J. Sci., 257 300 (1959) [74] S. Sato, Y. Nakano, A. Sato and T. Nomura, “Mechanism of improvement of resistance degradation in Y-doped BaTiO3 based MLCCs with Ni electrodes under highly accelerated life testing,” J. Euro. Ceram. Soc., 19 1061-65 (1999) [75] M. H. Lin and H. Y. Lu, “Site-occupancy of yttrium as a dopant in BaO-excess BaTiO3,” Mat. Sci. Eng., A335 101-108 (2002) [76] J. H. Kim, S. H. Yoon and Y. H. Han, “Effects of Y2O3 addition on electrical conductivity and dielectric properties of Ba-excess BaTiO3,” J. Euro. Ceram. Soc., 27 1113-1116 (2007) [77] J. Qi, L. Li, Y. Wang, Y. Fan and Z. Gui, “Yttium doping behavior in BaTiO3 ceramics at different sintered temperature,” Mater. Chem. & Phys., 82 423-427 (2003) [78] C. H. Kim, K. J. Park, Y. J. Yoon, M. H. Hong, J. O. Hong and K. H. Hur, “Role of yttrium and magnesium in the formation of core-shell structure of BaTiO3 grains in MLCC,” J. Euro. Ceram. Soc., 28 1213-1219 (2008) [79] Y. C. Wu, S. F. Wang, D. E. McCauley, M. S. H. Chu. and H. Y. Lu, “Dielectric behavior and second phases in X7R-formuated BaTiO3 sintered in low-oxygen partial pressures,” J. Am. Ceram. Soc., 90[9] 2926-34 (2007) [80] Y. Mizuno, T. Hagiwara, H. Chazono, and H. Kishi, “Effect of milling process on core-shell microstructure and electrical properties for BaTiO3-based Ni-MLCC,” J. Eur. Soc., 21 1649-52 (2001) [81] Y. Mizuno, T. Hagiwara, and H. Kishi, “Microstructural design of dielectrics for Ni-MLCC with ultra-thin active layers,” J. Ceram. Soc. Japan., 115[6] 360-364 (2007) [82] T. R. Armstrong, L. E. Morgens, A. K. Maurice, and R. C. Buchanan, “Effects of Zirconia on microstructure and dielectric properties of Barium Titanate Ceramics,” J. Am. Soc., 72[4] 605-11 (1989) [83] M. T. Buscaglia, V. Buscaglia, M. Viviani, P. Nannji, and M. Hanuskova, “Influence of foreign ions on the crystal structure of BaTiO3,” J. Eur. Ceram. Soc., 20 1997-2007 (2000) [84] Y. B. Kang, and H. G. Lee, “Experimental study of phase equilibria in the MnO- TiO2-Ti2O3 system,” ISIJ International, 45[11] 1543-51 (2005) [85] J. S. Chuna, P. Desjardinsa, I. Petrov, J.E. Greenea, C. Lavoieb, and C. Cabral Jr, “Interfacial reaction pathways and kinetics during annealing of epitaxial Al/ TiN (001) model diffusion barrier systems,” Thin Solid Films, 391 69-80 (2001) [86] R. E. Reed-Hill and R. Abbaschian, Physical metallurgy principles, 3rd edition, international Thomson publishing company (1992) [87] J. C. C. Lin and W. C. J. Wei, “Melting and interface reaction of Mn-Si-O glass for sintering of BaTiO3,” (accepted) J. Am. Ceram. Soc. [88] N. Louet, H. Reveron , and G. Fantozzi, “Sintering behaviour and microstructural evolution of ultrapure-alumina containing low amounts of SiO2,” J. Ceram. Soc. Eur. Soc., 28 205–215 (2008) [89] M. F. Yan, R. M. Cannon, and H. K. Bower, pp.276-307 in Ceramic Microstructures ’76, R. M. Fulrath and J. A. Pask, eds., Westview Press, Boulder, CO, 1977. [90] S. B. Lee, W. Sigle, and M. Ruhle, “Investigation of grain boundaries in abnormal grain growth structure of TiO2- excess BaTiO3 by TEM and EELs analysis,” Acta. Mater, 50 2151-62 (2002) [91] A. Halliyal, A. S. Bhalla, S. A. Markgraf, L. E. Cross, and R. E. Newnham, “Unusual pyroelectric and piezoelectric properties of fresnoite (Ba2TiSi2O8) single crystal and polar glass-ceramics,” Ferroelectrics, 62[1] 27–38 (1985) [92] D. Völtzke and H. P. Abicht, “The influence of different additives and mode of their addition on the sintering behavior and the properties of semiconducting barium titanate ceramics,” Solid State Sciences, 2 149-159 (2000) [93] J. C. C. Lin and W. C. J. Wei, “Low temperature sintering of BaTiO3 with Mn-Si-O Glass,” (in reviewing) Electro. Ceram. [94] M. Drofenik, “Origin of the grain growth anomaly in donor-doped barium titanate,” J. Am. Ceram. Soc., 76[1] 123-28 (1993) [95] G. Y. Yang, S. I. Lee, Z. J. Liu, C. J. Anthony, E. C. Dickey , Z. K. Liu, and C.A. Randall, “Effect of local oxygen activity on Ni–BaTiO3 interfacial reactions,” Acta Mater., 54 3513–3523 (2006) [96] S. Mrowec and Z. Grzesik, “Oxidation of nickel and transport properties of nickel oxide,” J. Phys. Chem. Solids, 65 1651-1657 (2004) [97] F. Czerwinski and J. A. Szpunar, “The influence of crystallographic orientation of nickel surface on oxidation inhibition by ceria coatings,” Acta Mater., 46[4] 1407-17 (1998) [98 ] M. A. Munoz-Marques, R. E. Tanner, and D. P. Woodruff, “Surface and subsurface oxide formation on Ni(100) and Ni (111),” Surf. Sci., 565 1-13 (2004) [99] X. Milhet, J. Cormier, P.O. Renault, C. Coupeau, and J. Colin, “Stress heterogeneity of thermally grown polycrystalline nickel oxide layers,” Mater. Sci. Eng., A395 22-26 (2005) [100] A. J. Springthorpe, “The rhombohedral distortion in NiO,” Phys. Stat. Sol., 24 K3 (1967) [101] M. W. Vernn, “The temperature dependence of the rhombohedral distortion in NiO,” Phys. Stat. Sol., 37 K1 (1970) [102] C. H. Hsueh, W. H. Tuan, and W. C. J. Wei, “Analysis of steady-state interface fracture of elastic multi-layered beams under four-point bending,” Script. Mat., 60 721-724 (2009) [103] C. C. Lin, W. C. J. Wei, C. Y. Su, and C. H. Hsueh, “Oxidation of Ni Electrode in BaTiO3 Based Multi-Layer Ceramic Capacitor (MLCC) Device,” Journal of Alloys and Compounds (accepted) [104] H. Shin, J. S. Park, S. Kim, H. S. Jung, and K. S. Hong, “Investigation of useful or deleterious residual thermal stress component to the capacitance of a multilayer ceramic capacitor,” Microelectron. Eng., 77 270-276 (2005) [105] Y. C. Lee, “Investigation of thin film end-termination on multilayer ceramic capacitors,” Mater. Chem. Phys., 110 100-105 (2008) [106] Y. C. Lee, W. H. Lu, and F. S. Shieu, “Investigation of thin film end-termination on multilayer ceramic capacitors with base-metal-electrode,” Ceram. Int. (2008), doi: 10.1016/j.ceramint.2008.03.016 [107] Y. C. Lee, M. Dupeux and W. H. Tuan, “Adhesion strength of Ag/BaTiO3 interface,” Scripta Mat., 54 453-457 (2006) [108] J. Verbeeck, Ph. D Thesis., Electron Microscopy for Material Science, University of Antwerp, Belgium (2002) | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/43422 | - |
dc.description.abstract | 本論文主要是製備一種錳矽氧組成的玻璃,用來作為鈦酸鋇燒結助劑的研究,一方面能降低燒結溫度,另一方面能夠提升介電性質。實驗初期先對於玻璃的結晶特性與熱性質作深入的探討,接著針對玻璃與鈦酸鋇基材的交互作用,包含玻璃的潤濕行為、鈦酸鋇溶解於玻璃、新的結晶相生成及反應的演變,全都藉由微結構定量分析來做討論,結果顯示此玻璃能夠讓鈦酸鋇產生固溶,並在1150oC產生良好的潤濕性。燒結的部分,此玻璃能讓純的鈦酸鋇在1175oC緻密化,並且藉由晶界相(Ba2TiSi2O8)的生成,有效地抑制晶粒成長;而錳元素則是均勻的固溶在系統中,並且造成鈦酸鋇的tetragonality(c/a)的改變。對於需高於1300oC方能燒結緻密的商用粉體釔/矽塗附(coated)的鈦酸鋇粉體來說,此玻璃的添加能促使其於1200oC下緻密化,並且符合陶瓷積層電容X7R或X8R的規格。不同氣氛(空氣及還原)對燒結的影響,核殼結構的生成機制,以及燒結緻密化之機制一併於此研究中作仔細的探討。最後,本研究將製作完成的多層電容元件,經過不同補氧時程的處理,結果顯示鎳電極的氧化,會造成電極的不連續情況,以及降低電容(C) 和絕緣電阻(IR)值。文中關於氧化層的微結構分析、生長動力學、與氧化所產生的介面應力的計算,皆進行更深入的研究。 | zh_TW |
dc.description.abstract | The glass composed of 3MnO1.5-2SiO2 has been produced and served as a sintering aid of BaTiO3. The glass additive is able to lower the sintering temperature, and improve the dielectric properties of BaTiO3. In the beginning of this study, crystallization and thermal characteristics of the glass were investigated, and then the interaction between the glass and BaTiO3 was studied. Wetting behavior of the glass, dissolution of BaTiO3 in glass melt, identification of newly-formed phases, and sequential reaction kinetics of the glass/BaTiO3 system were investigated by electron microscopy with quantitative X-ray energy dispersive spectroscopic (Q-EDS) analysis. The results showed that partial solid-solution of BaTiO3 in the glass iso-thermally treated at 1150oC can benefit the wetting property of the glass on the BaTiO3 substrate. Sintering results showed that pure BaTiO3 could get full density after sintering at 1175oC in 1 hr in air. The grain growth was inhibited by the grain boundary pinning effect of newly formed secondary phase, Ba2TiSi2O8. Tetragonality (c/a) of BaTiO3 gradually decreased with the increasing amount of solid-solution of Mn element in BaTiO3. For the other samples, the sintering temperature of Y/Si coated BaTiO3 commercial powder was reduced from 1300oC to 1200oC with the glass addition. Moreover, the dielectric property of sintered samples could meet the specifications of X7R or X8R. Atmosphere effects (air or 97%N2-3%H2), forming mechanisms of core-shell structure, and densification mechanisms were also studied in detail. Finally, the MLCC (Multi-Layer Ceramic Capacitor) chips after different duration of reoxidation process were utilized to analyze dielectric performance and oxidation of Ni inner electrodes. The results showed that the formation of NiO would result in the discontinuity of Ni electrode and further degrade the capacitance and IR (Isolation Resistance) of the chips. In addition, the investigation on microstructural evolution, growth kinetics, and the calculation of induced stresses of NiO were also conducted. | en |
dc.description.provenance | Made available in DSpace on 2021-06-15T01:55:50Z (GMT). No. of bitstreams: 1 ntu-98-D94527005-1.pdf: 18596781 bytes, checksum: be177f9e67b1da11e4e8675049ee1199 (MD5) Previous issue date: 2009 | en |
dc.description.tableofcontents | Chapter 1 Introduction……………………………………………..............…….......1
1.1 Motivation.………………………………………………………….........1 1.2 Objectives…………………………………………………………….......4 Chapter 2 Literature Survey…………………………………............………...........6 2.1 MLCC with Base-Metal electrode……………………………………...6 2.1.1 Ni Electrode in MLCC……………………………………………...6 2.1.2 Effects of Reoxidation…………………………………………..…13 2.1.3 Diffusion Route of Oxygen during Reoxidizing Treatment…….....17 2.1.4 Oxidation of Metal Electrode: Mechanisms and Kinetics………....20 2.2 Liquid Phase Sintering…………………………………........................22 2.2.1 Densification by Liquid Phase Sintering……………………….….22 2.2.2 Liquid Phase Sintering of BT (Effects on Microstructure and Electricity)..……………………………………………………….28 2.2.3 Effect of SiO2 Addition………………………….............................33 2.3.4 Grain Growth and Grain Growth Inhibition…………...…………..37 2.3 BaTiO3 via Extra Elements Doping.......................................................43 2.3.1 Formation of Core-Shell Structures………………………….…….43 2.3.2 Modification of Dielectric Properties ……………………………44 2.3.3 Effects of Mn………………………………………………………49 2.3.4 Yttria Doped BaTiO3 System………………………………………54 2.3.5 Analysis of Core-Shell Structures………………………….………55 Chapter 3 Experimental Procedures………………………………….....………..59 3.1 Materials………………………………………………………………...59 3.1.1 Preparation of the Mn2O3-SiO2 Glass……………………………...59 3.1.2 BaTiO3 powder…………………………………………………….59 3.1.3 BaTiO3 Capacitor…………………………….................................60 3.2 Characterization……………………………………………………….61 3.2.1 Wetting Behavior of Mn-Si-O Glass on BaTiO3 Bulk…………….61 3.2.2 Properties Characterization……………..…………………………62 3.2.3 Microstructural Analysis of the MLCC Devices before and after reoxidization treatment……………………………………………64 Chapter 4 Interface of BaTiO3/Mn2O3-SiO2 Glass…………………..........68 4.1 Characteristics of Mn2O3-SiO2 Mixture and Glass…………………..68 4.2 Wetting Behavior and Interface Reaction…………………………….74 4.3 Discussion……………………………………………………………….85 Chapter 5 Liquid Phase Sintering of BaTiO3 via the Addition of Mn2O3 - SiO2 Glass……………………………………………………….……….89 5.1 Sintering Behavior of Glass-added Pressure Casting-BaTiO3……….89 5.2 Microstructure Development…………………………………………..93 5.3 Effects of Glass Content………………………………………………103 5.4 Discussion……………………………………………………………...112 5.4.1 Mechanism of Gain Growth Inhibition…………………………...112 5.4.2 Effects of Microstructures on Dielectric Properties..…………….113 Chapter 6 Liquid Phase Sintering of Y/Si coated-BaTiO3 via the Addition of Mn2O3-SiO2 Glass………………….…………………116 6.1 Sintering in Air……………..………………………………………….116 6.2 Sintering in Reducing Atmosphere (97%N2-3%H2) with or without Post-Oxidation Treatment (at 1000oC in N2 for 2 hr)……………….134 6.3. Discussion……………………………………………………………..142 6.3.1 Effects of Glass on Sintering and Grain Growth…………………142 6.3.2 Formation of Core-shell Structures………………………………143 6.3.3 Dielectric Properties and Characteristics of TCC………………..144 6.3.4 Densification Mechanisms in Air Atmosphere…………………...147 Chapter 7 Oxidation of Ni Electrode in BaTiO3 Based Multi-Layer Ceramic Capacitor (MLCC)………………………………………..149 7.1 Microstructural Evolution, Dielectric Performance and Oxidation Mechanisms……………………………………………………………149 7.2 Stress Analysis in the Ni/NiO/BaTiO3 Layers……………………….163 Chapter 8 Conclusions.............................................................................................166 References……………………………………………………………………..…….170 | |
dc.language.iso | en | |
dc.title | 添加錳矽氧玻璃之鈦酸鋇陶瓷電容的液相燒結與特性之研究 | zh_TW |
dc.title | A Study on Liquid Phase Sintering and Dielectric Behavior of BaTiO3 Ceramic Capacitor with Mn-Si-O Glass Addition | en |
dc.type | Thesis | |
dc.date.schoolyear | 97-2 | |
dc.description.degree | 博士 | |
dc.contributor.oralexamcommittee | 黃啟原,黃坤祥,盧宏陽,薛承輝,林建正 | |
dc.subject.keyword | 鈦酸鋇,液相燒結,氧化錳,氧化矽,X8R,氧化鎳, | zh_TW |
dc.subject.keyword | BaTiO3,liquid phase sintering,Mn2O3,SiO2,X8R,NiO, | en |
dc.relation.page | 180 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2009-06-29 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-98-1.pdf 目前未授權公開取用 | 18.16 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。