請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/42980
標題: | 溫度敏感磁性中空乳膠顆粒之製備與性質研究 Synthesis and Research of Termosensitive Magnetic Hollow Latex Particle |
作者: | Mei-Ling Lin 林玫伶 |
指導教授: | 邱文英(Wen-Yen Chiu) |
關鍵字: | 氮-異丙基丙烯醯胺,甲基丙烯酸,中空乳膠顆粒,磁性,藥物釋放, N-isopropylacrylamide,acrylic acid,hollow latex,magnetic,drug release, |
出版年 : | 2009 |
學位: | 碩士 |
摘要: | 摘要
本研究目的是利用無乳化劑乳化聚合法製備溫度敏感磁性中空乳膠顆粒,並將合成出的顆粒包覆藥物,進行各項測試。 本論文分三部份,第一部份:合成Poly(Methylmethacryl-Methyl acrylic acid)(poly(MMA-MAA))乳膠顆粒,並以此乳膠顆粒為seeds,再分別加入N-Isopropylacrylamide(NIPAAM)、Methyl acrylic acid(MAA)、交聯劑N,N’-Methylene-bisacrylamide(MBA)及起始劑Potassium persulfate(KPS),形成外層有交聯結構的Poly(MMA-MAA)/poly(NIPAAM-MAA)乳膠顆粒。接者加入氨水,將顆粒內部無交聯的部份Poly(MMA-MAA)溶解出來,形成中空乳膠顆粒。在實驗中,改變殼層NIPAAM及MAA比例、MBA量,並以TEM觀察中空顆粒形態並探討其性質。 第二部份,我們利用具有羧酸基之中空乳膠顆粒Poly(NIPAAM-MAA),加入鐵離子並與顆粒鍵結成-COOFe2+及-COOFe3+,當氨水參與反應時,Fe3O4將會以in-situ的方式形成。針對不同殼層比例並改變磁流形成環境的pH值、溫度及磁流添加量,由TEM圖觀察磁性乳膠顆粒上磁流的分布及性質。 第三部份,選出上述步驟中,磁流分佈較均勻的磁性中空乳膠顆粒為seeds,再添加NIPAAM、MAA、MBA及KPS形成Poly(NIPAAM-MAA)/Fe3O4/Poly(NIPAAM-MAA)中空磁性乳膠顆粒,改變seeds濃度、NIPAAM、MAA及MBA量,並進行LCST及TEM的測試與觀察。最後,利用紫外光-可見光分光光度計在272nm,於不同時間下取樣測試咖啡因濃度-藥物包覆釋放實驗,並討論不同pH值、不同溫度下包覆效果。 關鍵字:氮-異丙基丙烯醯胺,甲基丙烯酸,中空乳膠顆粒,磁性,藥物釋放 Abstract We synthesis magnetic hollow latex with the behaviors of thermosensitivity by the method of soapless emulsion polymerization. We tests this magnetic hollow latex in some experiments including TEM, LCST and drug release. First, We synthesis the linear copolymer,poly(methyl methacrylate-methyl acrylic acid)(Poly(MMA-MAA)). Using it as seeds, we add different ratio of NIPAAM(N-isopropylacrylamide)/MAA(methacrylic acid) and amount of crosslinker to synthesis Poly(MMA-MAA) /(NIPAAM-MAA). Then we use ammonium hydroxide to dissolve Poly(MMA-MAA) inside of the particle to get hollow P(NIPAAM-MAA) latex which is thermo-sensitive. We use transmission electron microscopy to observe hollow Poly(NIPAAM-MAA) latex. Second, by using the functional group (-COOH) on hollow latex surface to bond with Fe2+and Fe3+, we put ammonia into the latex, and get magnetic hollow latex. The effects of temperature, amount of Fe3O4, and ratio of NIPAAM/MAA on in-situ reaction were investigated. Third, using magenetic hollow latex as seeds, we add different ratio of NIPAAM/MAA and amount of crosslinker to synthesis Poly(NIPAAM-MAA)/Fe3O4/(NIPAAM-MAA) magnetic hollow latex. The magnetic hollow latex containing thermo-sensitive monomers can be used in drug releasing treatment. We observe drug release of magenic hollow latex in different temperature and buffer solution by UV-vis Spectrophotometer. Keyword: N-isopropylacrylamide, acrylic acid, hollow latex, magnetic, drug release |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/42980 |
全文授權: | 有償授權 |
顯示於系所單位: | 高分子科學與工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-98-1.pdf 目前未授權公開取用 | 6.59 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。