請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/41641
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 蘇金佳 | |
dc.contributor.author | Yen-Hung Liu | en |
dc.contributor.author | 劉彥宏 | zh_TW |
dc.date.accessioned | 2021-06-15T00:25:48Z | - |
dc.date.available | 2010-02-03 | |
dc.date.copyright | 2009-02-03 | |
dc.date.issued | 2009 | |
dc.date.submitted | 2009-01-22 | |
dc.identifier.citation | 【1】 日本電氣協同研究第53卷第3號,“地下電纜送電容量設計”,平成10年1月,p.104~139
【2】 江明德,“地下輸電電纜洞道冷卻系統暨氣流模擬研究”,國立台北科技大學冷凍空調工程研究所碩士論文,民國93 【3】 台灣電力公司,“輸電電纜線路管路工程設計準則”,民國87年11月 【4】 何柏慶,“半圓洞道內冰水管間接冷卻系統之自然對流熱傳研究”,國立台灣大學機械工程研究所碩士論文,民國96年 【5】 杜文祥,“地下電纜洞道內冰水管間接冷卻系統之性能研究”,國立台灣大學機械工程研究所碩士論文,民國95年 【6】 J.V. Herráez, R. Belda, “A study of free convection in air around horizontal cylinders of different diameters based on holographic interferometry. Temperature field equations and heat transfer coefficients”, International Journal of thermal Sciences, Vol. 41, 2002, pp.261-267. 【7】 M.T. Sako, T. Chiva, J.M. Salinas, A. Yanagida, “Numerical solution of transient natural convective heat transfer from a cylinder”, Heat Transfer-Jan, Res. 11, 1982, pp.27-44. 【8】 M.I. Farinas, A. Garon, K. St Louis, “Study of heat transfer in a horizontal cylinder with fins”, Revue Générale de Thermique, Vol. 36, Issue 5, 1997, pp.398-410. 【9】 R. Diez, M. Dolz, Rbelda, J.V. Herraez, M. Buendia, “Free convection around a horizontal circular cylinder. Adimensional empirical equations”, Applied Scientific Research, Vol. 46, 1989, pp.365-378. 【10】 H. Tokanai, M. Kuriyama, E. Harada, H. Konno, “Natural convection heat transfer from vertical and inclined arrays of horizontal cylinders to air”, Journal of chemical engineering of Japan, Vol. 30, No. 4, 1997, pp.728-734. 【11】 R. Gonzalez, P. Wintz, “Digital Image Processing”, Addison-Wesley, Reading, 1987. 【12】 W. Hauff, U. Grigull, “Optical Methods in Heat Transfer”, Advances in Heat Transfer, Academic Press, New York, 1970, pp.133-366. 【13】 J.T. Anderson, O.A. Saunders, “Convection from an Isolated Heated Horizontal Cylinder Rotating about Its Axis”, Proceedings of the Royal Society of London, Series A, Mathematical and Physical Sciences, Vol. 217, No. 1131, 1953, pp.555-562. 【14】 J.A. Peterka, P.D. Richardson, “Natural convection from a horizontal cylinder at moderate Grashof numbers”, International Journal of Heat and Mass Transfer, Vol. 12, 1969, pp.749-752. 【15】 Amr O. Elsayed, Emad Z. Ibrahim, Sayed A. Elsayed, “Free convection from a constant heat flux elliptic tube”, Energy Conversion and Management, Vol. 44, Issue 15, 2003, pp.2445-2453. 【16】 Fieg GP, Roetzel W, “Calculation of Laminar-Film Condensation in/on Inclined Elliptic Tubes”, International Journal of Heat and Mass Transfer, Vol. 37, No. 4, 1994, pp.619-624. 【17】 Memory S.B., Adams V.H., Marto P.J., “Free and forced convection laminar film condensation on horizontal elliptical tubes”, International Journal of Heat and Mass Transfer, Vol. 40, No. 14, 1997, pp.3395-3406. 【18】 H.M. Badr, K. Shamsher, “Free convection from an elliptic cylinder with major axis vertical”, International Journal of Heat and Mass Transfer, Vol. 36, No. 1414, 1993, pp.3595-3602. 【19】 Y.M. Chen, K.C. Wang, “Numerical and experimental studies on natural convection from a horizontal elliptic cylinder”, Journal of the Chinese Institute of Chemical Engineers, Vol. 27, No. 5, 1996, pp.353-362. 【20】 H.M. Badr, “Laminar natural convection from an elliptic tube with different orientations”, Journal of Heat Transfer, Vol. 119, Issue 2, 1997, pp.709-717. 【21】 F. Karim, B. Farouk, I. Namer, “Natural Convection Heat Transfer From a Horizontal Cylinder Between Vertical Confining Adiabatic Walls”, Journal of Heat Transfer, Vol. 108, 1986, pp.291-298. 【22】 Marsters, G. F., “Effects of Confining Walls Upon Natural Convection From a Heated Horizontal Cylinder”, Proceedings of the Fourth Canadian Congress of Applied Mechanics, May 28-June 1, 1973, Montreal, pp.789-790. 【23】 Marsters, G. F., and Paulus, G., “Effects of Confining Walls on Heat Transfer From a Vertical Array of Heated Horizontal Cylinders”, Transactions of the CSME, Vol. 1, No. 4, 1972, pp.219-222. 【24】 Farouk, B., and Guceri, S. I., “Natural and Mixed Convection Heat Transfer Around a Horizontal Cylinder Within Confining Walls”, Numerical Heat Transfer, Vol. 5, No. 3, 1982, pp.329-341. 【25】 Sparrow, E. M., and Pfeil, D. R., “Enhancement of Natural Convection Heat Transfer From a Horizontal Cylinder Due to Vertical Shrouding Surfaves”, ASME Journal of Heat Transfer, Vol. 106, Feb. 1984, pp.124-130. 【26】 王正健,“水平圓管內冷熱圓柱間自然對流現象之實驗研究”,國立成功大學機械工程研究所碩士論文,民國79年 【27】 T. Kimura, M. Takeuchi, N. Nagai, and M. Hirano, “Experimental Study of Natural Convection Heat Transfer in a Semicircular Enclosure”, Heat Transfer-Japanese Research, Vol. 26, Issue 2, 1997, pp.131-142. 【28】 R.D. Flack, “The experimental measurement of natural convection heat transfer in triangular enclosures heated or cooled from below”, Journal of Heat Transfer, Vol. 102, 1980, pp.770. 【29】 D. Poulikakos, A. Bejan, “Natural convection experiments in a triangular enclosure”, Journal of Heat Transfer, Vol. 105, pp.652-655. 【30】 T. Kimura, N. Heya, M. Takeuchi, H. Isomi, “Natural convection heat transfer phenomena in an enclosure filled with two stratify fluids”, JSME (B) 52, 1986, pp.617–625. 【31】 N. Al-ani, M.W. Nansteel, “Natural Convection in a Partial Sector-Shaped Enclosure: Experimental Results”, Journal of Heat Transfer, Vol. 115, Issue 1, 1993, pp.133-139. 【32】 T. Kimura, M. Takeuchi, N. Nagai, and M. Hirano, “Natural Convection Heat Transfer in a Circular Enclosure”, Heat Transfer-Asian Research, Vol. 28, Issue 2, 1999, pp.152-163. 【33】 M. Sadegh Sadeghipour, Yazdan Pedram Razi, “Natural convection from a confined horizontal cylinder: the optimum distance between the confining walls”, International Journal of Heat and Mass Transfer, Vol. 44, 2001, pp.367-374. 【34】 G.F. Marsters, “Natural convection heat transfer from a horizontal cylinder in the presence of nearby walls”, The Canadian Journal of Chemical Engineering, Vol. 35, 1975, pp.144-149. 【35】 Liping Ma, Zaden Vander, N.F. Vander Koo, F.T.M. Nieuwstadt, “Natural convction around a horizontal cicular cylinder in infinite space and within confining plates: a finite element solution”, Numerical Heat Transfer, Part A 25, 1994, pp.441-456. 【36】 H.J. Künisch, M.H. Bohge, and E. Rumpf, “Underground High-Power Transmission. Part III: Experience From Practice And Experimental Work In Berlin (West)”, 7th IEEE/PES Tansmission and Distribution Conference and Exposition, April 1-6, 1979. 【37】 M. Hayashi, K. Uchida, W. Kumai, K. Sanjo, M. Mitani, N. Ichiyanagi, and T. Goto, “Development of water pipe cooling system for power cables in tunnels”, IEEE Transations on Power Delivery, Vol. 4, No. 2, April 1989. 【38】 M. Krarti and J.F. Kreider, “Analytical model for heat transfer in an underground air tunnel”, Energy Convers. Mgmt, Vol. 37, No. 10, 1996, pp.1561-1574. 【39】 李四川,“共同管道及電力輸電線冷卻節能系統之研究”,國立台北科技大學電機工程研究所碩士論文,民國90年 【40】 財團法人中華顧問工程司,“台灣電力公司仙渡345 kV地下電纜工程規劃設計工作服務建議書”,2001 【41】 陳慶豐,“超高壓電纜地下洞道冷卻氣流模擬分析”,國立台北科技大學冷凍空調工程研究所碩士論文,民國94年 【42】 財團法人中華顧問工程司,“大安變電所相關345 kV電纜線路規劃設計及監造技術服務工作高壓地下電纜洞道間接水冷系統模型實驗研究計畫”,民國95年11月 【43】 http://www.trane.com.tw/Demo/product/product.htm,2007/04/20 【44】 J.P. Holman, “Heat Transfer”, 8th ed., 2000. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/41641 | - |
dc.description.abstract | 大型地下洞道的發展和工程設計越來越普遍且受到重視,國內對於大型洞道工程的經驗不多,且缺乏相關的研究文獻,本研究以大型半圓洞道為實體模型進行研究,並利用冷水管間接冷卻系統作為洞道內的冷卻散熱裝置,以棒狀加熱器模擬洞道中因輸電發熱的電纜熱源,探討相關的熱傳效應。
實驗過程中以四個加熱器位置、加熱器表面溫度(100℃、150℃、200℃、250℃)、冷卻水總流量(8LPM、12LPM、16LPM)和冷水管數(四管、單管Ⅰ、單管Ⅳ)作為操縱變因,在洞道內佈設熱電偶線量測空氣溫度,同時也量測冷水入出口水溫及加熱器表面溫度,將所獲得的數據進行軸向溫度分佈、剖面溫度分佈的分析和繪圖。 當洞道內熱源置於越上方(但在冷水管位置以下)靠近冷水管時,雖然在洞道頂端的空氣溫度較熱源置於其他位置來得高,但熱源水平位置以下具有均勻且低溫的活動空間;若半圓洞道內熱源置於圓弧面中間或下方位置,雖然熱源附近的空氣受熱膨脹上升有較充裕的空間和洞道上方冷水管的冷空氣混合,使得洞道內最高溫降低,但在洞道剖面空間中大部份量測點的溫度則較熱源置於高處來得高。研究結果也顯示,在同樣的冷卻水流量和同樣的熱源表面溫度之下,若將熱源置於洞道不同的地方,除了會造成不同的剖面空氣溫度分佈之外,空氣平均溫度和最高最低溫也會出現差異。 而在冷水管數的研究中,發現在相同的冷水總流量之下,冷水管數多寡的均勻散佈程度對洞道內空氣溫度的高低影響非常顯著,冷水管採多管的分佈會比單管大流量大幅降低洞道空氣平均溫度和最高溫。 另外,在熱源所在水平線以上的溫度量測點,較易產生溫度變動的情形,尤以熱源正上方附近及冷水管下方周圍的變動區間最大,顯示該處冷熱空氣對流的劇烈及不穩定。 | zh_TW |
dc.description.abstract | The development and engineering design of large underground tunnel becomes more general and worthy to take seriously. We don’t have enough engineering experience on building large underground tunnel in Taiwan and lack for the related research literature. This research proceeds in a large semicircular tunnel model, in which air is cooled by indirect water cooling system. The linear heat source in the tunnel is simulated by electric heaters.
The effect of the position of the heat source, the surface temperature of the heater(100, 150, 200, and 250℃), cold water flow rate(8, 12, and 16LPM), and the number of cooling pipes(four pipes, single pipeⅠ, single pipe Ⅳ) were investigated. Air temperature distribution in the tunnel in the axial direction and in different cross- section areas were obtained with thermocouples. If the linear heat source is located near, but below, the cold water pipe located on top of the tunnel, the temperature of the air near the top of the tunnel gets higher. However, we have more uniform and lower air temperature in the tunnel space below the heat source. When the linear heat source is located in the middle section or near the bottom of the tunnel, the highest temperature of air reduces, but the average cross-section temperature becomes higher. Though the water flow rate and the surface temperature of the heater keep the same, different positions of the heat source cause different air temperature distribution in cross-section. The average, maxumin and minimum of air temperature were also change. In the experiment of the number of cooling pipes, the result shows that using multi-pipe to reach the same water flow rate has lower temperature of air in tunnel than using single pipe. Moreover, the temperature at the position above the level line of the linear heat source changes easily and oscillate, especially near the position right above the heat source and below the cool water pipe. It shows that the counter flow of cold and hot air there is most fierce and most unstable. | en |
dc.description.provenance | Made available in DSpace on 2021-06-15T00:25:48Z (GMT). No. of bitstreams: 1 ntu-98-R95522309-1.pdf: 4003723 bytes, checksum: 453bedc0edb018adabbdb30a21e62d18 (MD5) Previous issue date: 2009 | en |
dc.description.tableofcontents | 中文摘要 I
英文摘要 II 目錄 III 表目錄 V 圖目錄 VI 符號說明 XI 第一章 緒論 1 1.1 研究背景 1 1.2 研究動機 1 1.3 研究目的 3 第二章 文獻回顧 4 2.1 單一管狀熱源的自然對流研究 4 2.2 封閉空間中含線性熱源之自然對流研究 5 2.3 洞道內冷卻系統之熱傳研究 8 第三章 實驗設備與方法 12 3.1 洞道主體 12 3.2 冷水循環系統 12 3.2.1 冰水主機及冰水循環泵 13 3.2.2 恆溫蓄水槽(含補水裝置) 13 3.2.3 系統循環泵 13 3.2.4 入出口分流管及旁通(bypass) 13 3.2.5 PE冷水管 14 3.3 加熱元件 14 3.4 量測設備 14 3.5 實驗流程 15 3.6 操縱變因 16 3.7 數據計算與分析 16 第四章 結果與討論 18 4.1 設置冷水管間接冷卻系統的功效 18 4.2 洞道軸向溫度梯度變化 19 4.3 加熱器表面溫度對洞道剖面空氣溫度分佈的影響 20 4.4 不同熱源位置對洞道剖面空氣溫度分佈的研究 21 4.4.1 加熱器在位置A時的剖面溫度分佈 21 4.4.2 加熱器在位置B時的剖面溫度分佈 21 4.4.3 加熱器在位置C時的剖面溫度分佈 22 4.4.4 加熱器在位置D時的剖面溫度分佈 22 4.4.5 加熱器(洞道內熱源)在不同位置時的綜合比較 23 4.4.6 洞道剖面空氣溫度分佈的無因次化 24 4.5 冷水流量與冷水管位置(單管)的影響 25 4.6 洞道內溫度易變動點的觀察 27 4.7 壁溫量測的觀察 27 第五章 結論與建議 28 5.1 結論 28 5.2 建議 29 參考文獻 31 附表 35 附圖 41 附錄A 熱電偶線溫度校正 88 | |
dc.language.iso | zh-TW | |
dc.title | 半圓洞道內線性熱源位置對剖面溫度的效應 | zh_TW |
dc.title | Effects of Position of Linear Heat Source on Cross-Section Temperature Distribution in a Semicircular Tunnel | en |
dc.type | Thesis | |
dc.date.schoolyear | 97-1 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 李昭仁,黃智勇 | |
dc.subject.keyword | 地下洞道,間接水冷,半圓形封閉空間,自然對流, | zh_TW |
dc.subject.keyword | underground tunnel,indirect water cooling,semicircle enclosure,natural convection, | en |
dc.relation.page | 89 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2009-01-22 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-98-1.pdf 目前未授權公開取用 | 3.91 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。