請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/41598
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 林晃巖 | |
dc.contributor.author | Wei-Chung Chen | en |
dc.contributor.author | 陳韋仲 | zh_TW |
dc.date.accessioned | 2021-06-15T00:24:19Z | - |
dc.date.available | 2013-08-20 | |
dc.date.copyright | 2011-08-20 | |
dc.date.issued | 2011 | |
dc.date.submitted | 2011-08-15 | |
dc.identifier.citation | [1] http://www.osram-os.com/osram_os/EN/.
[2] http://www.philipslumileds.com/. [3] http://zh.wikipedia.org/wiki/LED. [4] Roland Winston, Juan C. Miñano, Pablo Benítez, Nonimaging Optics, Elsevier, CA, 2005. [5] Julio Chaves, Introduction to NONIMAGING OPTICS, CRC Press, 2008. [6] P. Benítez, J. C. Miñano, J. Blen, J. Chaves, O. Dross, M. Hernández, and W. Falicoff, “Simultaneous multiple surface optical design method in three dimensions,” Opt. Eng. 43(7), 2004, 1489–1502. [7] K. L. Huang, J. J. Chen, T. Y. Wang, and L. L. Huang, “Free-form lens design for LED indoor illumination,” Proc. SPIE 7852, 2010, 78521D. [8] Y. Ding, X. Liu, Z. Zheng, and P. Gu, “Freeform LED lens for uniform illumination,” Opt. Express 16(17), 2008, 12958–12966. [9] L. Sun, S. Jin, and S. Cen, “Free-form microlens for illumination applications,” Appl. Opt. 48(29), 2009, 5520–5527. [10] K. Wang, S. Liu, F. Chen and Z. Qin, “Free-form lenses for high illumination quality light-emitting diode MR16 lamps,” Opt. Eng. 48(12), 2009, 123002. [11] Z. Zheng, X. Hao, and X. Liu, “Freeform surface lens for LED uniform illumination,” Appl. Opt. 48(35), 2009, 6627–6634. [12] William B. Elmer, The Optical Design of Reflectors, John Wiley & Sons, 1980. [13] L. Wang, José M. Sasián, P. Su, and R. John Koshel, “Generation of Uniform Illumination Using Faceted Reflectors,” Proc. SPIE 7423, 2009, 74230Y. [14] H. Ries, “Tailored freeform optical surfaces,” J. Opt. Soc. Am. A19, 2002, 590–595. [15] H. Ries and J. Muschaweck, “Tailoring freeform lenses for illumination,” Proc. SPIE 4442, 2001, 43–50. [16] B. Yang and Y. T. Wang, “Computer aided design of free form reflector,” Proc. SPIE 5942, 2004, 88–96. [17] Wayne Tiller, The NURBS Book, Springer, 1996. [18] W. A. Parkyn, “The design of illumination lenses via extrinsic differential geometry ,” Proc. SPIE 3428, 1998, 154–162. [19] Robert E. Fischer, Biljana Tadic-Galeb, and Paul R. Yoder, Optical System Design, Mc Graw Hill, 2008. [20] Alma E. F. Taylor, Illumination Fundamentals, Rensselaer Polytechnic Institute, 2000. [21] Warren J. Smith, Modern Optical Engineering, Mc Graw Hill, 2008. [22] http://www.tdmda.org.tw/. [23] Eegene Hecht, Optics, Addison Wesley, 2002. [24] Ajoy Ghatak, Optics, Mc Graw Hill, 2009. [25] J. J. Chen and C. T. Lin, “Freeform surface design for a light-emitting diode–based collimating lens,” Opt. Eng. 49(9), 2010, 093001. [26] SolidWorks Corp. http://www.solidworks.com/ [27] Synopsys, Inc. http://www.opticalres.com/lt/ltprodds_f.html [28] http://www.me.ntou.edu.tw/coursemat/MechDesign/plastics.doc [29] http://www.chinaelectric.com.tw/cns.htm [30] K. Wang, S. Liu, F. Chen, Z. Qin, Z. Liu and X. Luo “Freeform LED lens for rectangularly prescribed illumination,” J. Opt. A: Pure Appl. Opt. 11 105501. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/41598 | - |
dc.description.abstract | 欲達到高均勻度及高效率的LED照明,二次光學透鏡是必需的。本篇主要根據LED初始光源強度分佈來設計自由曲面透鏡來達到高均勻度及高效率的照明。由於整個光學系統屬於旋轉對稱,所以只需找出二維軌跡並旋轉掃出成三維立體透鏡即可。整個設計流程主要是根據折射定律、邊緣光線定理、及能量映射等理論。設計初步先分析LED光源強度分佈並於經緯度方向作等角度分割,接著計算每個區塊被分配到目標平面上的區域大小,接著利用近似解析方法來建構自由曲面透鏡。完成透鏡建構後,使用光學模擬軟體LightTools®對整個模型作光追跡分析,模擬結果發現確實可達到高均勻度極高效率照明。最後將二次透鏡設計進行修正調制,並使用Cree XR-E光源針對1公尺遠半徑1公尺之圓形照明(半視角45度)可達均勻度94.8%、效率89.1%。 | zh_TW |
dc.description.abstract | In this paper, design examples related to LED illumination are presented. We design a freeform lens according to the initial LED light source intensity distribution so that the light rays emitted from a LED through the lens can achieve high uniformity and efficiency on the prescribed target plane. Because the model is of rotational symmetry, we consider just a 2-D lens shape and then sweep to get the 3-D result. Here a procedure based on the Snell’s law and “edge-ray principle” for designing the freeform lens is proposed. First of all, we analyze the LED intensity distribution and subdivide it into parts. Then we calculate the zones on the target plane where the subdivided light rays should be distributed to. Finally we use an analytic approximate method to construct the freeform lens. After constructing the freeform lens, we simulate for the optical model by using the ray-tracing software LightTools®. The simulation results are very close to our expectation, that is, most light rays are distributed to the zones as designed. Finally we modulated the design process and the simulation results show that the Cree XLamp XR-E LED light source through the freeform lens can achieve up to 94.8% uniformity and 89.1% efficiency including Fresnel losses for a 1 m distance away and 1 m radius of circular illumination plane. This method utilizes simple processes and the model can be easily constructed; so they can be very useful for designing LED illumination. As long as variables such as the distance and range of the illumination plane are prescribed, the lens of secondary optics can be designed to achieve high uniformity and efficiency for LED illumination. | en |
dc.description.provenance | Made available in DSpace on 2021-06-15T00:24:19Z (GMT). No. of bitstreams: 1 ntu-100-R98941101-1.pdf: 2576591 bytes, checksum: 1b51721f1c06e2fade2fe2621945ddb0 (MD5) Previous issue date: 2011 | en |
dc.description.tableofcontents | 誌謝 i
中文摘要 ii ABSTRACT iii 目錄 iv 圖目錄 vii 表目錄 xiii Chapter 1 緒論 1 1.1 發光二極體介紹 1 1.2 照明發展 3 1.3 自由曲面透鏡 5 Chapter 2 設計理論 6 2.1 光度學 6 2.2 系統模型 9 2.3 能量映射 10 2.4 幾何分析 12 2.5 近似解析方法 15 2.6 透鏡建構 17 Chapter 3 模擬實驗 19 3.1 模擬範例 20 3.2 光強度細分程度 24 3.3 透鏡尺寸模擬 29 3.4 透鏡內層半球修改 32 3.4.1 球型大小 32 3.4.2 內球高低位置 34 3.4.3 經過內層再開始分析場進而設計 38 3.5 設計極限 41 3.6 安裝誤差 47 3.6.1 垂直位置誤差 47 3.6.2 水平位置誤差 50 3.6.3 角度偏移誤差 53 3.7 光源置換 55 3.7.1 現有光源置換比較 55 3.7.2 多晶光源 58 3.7.3 非旋轉對稱光源 59 3.8 透鏡材料比較 61 3.9 真實照明模擬 62 Chapter 4 總結 64 4.1 模擬結果分析討論 64 4.2 文獻比較 66 4.2.1 方法比較 66 4.2.2 結果比較 66 4.3 修正調制 68 Chapter 5 未來展望 75 5.1 實做 75 5.2 照明樣式變化 77 5.3 變更設計理論 78 5.4 最佳化 79 REFERENCE 80 | |
dc.language.iso | zh-TW | |
dc.title | 高均勻度及高效率LED照明之自由曲面透鏡設計 | zh_TW |
dc.title | Freeform lens design for LED illumination
with high uniformity and efficiency | en |
dc.type | Thesis | |
dc.date.schoolyear | 99-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 黃鼎偉,黃君偉 | |
dc.subject.keyword | 二次光學,LED照明,自由曲面, | zh_TW |
dc.subject.keyword | Secondary optics,LED illumination,freeform lens, | en |
dc.relation.page | 80 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2011-08-15 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 光電工程學研究所 | zh_TW |
顯示於系所單位: | 光電工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-100-1.pdf 目前未授權公開取用 | 2.52 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。