請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/41561
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 陳永傳 | |
dc.contributor.author | Tzu-Chieh Hua | en |
dc.contributor.author | 華子傑 | zh_TW |
dc.date.accessioned | 2021-06-15T00:23:05Z | - |
dc.date.available | 2011-02-10 | |
dc.date.copyright | 2009-02-10 | |
dc.date.issued | 2009 | |
dc.date.submitted | 2009-02-02 | |
dc.identifier.citation | 1.熱處理手冊第二版第四卷 熱處理質量控制與檢驗方法 pp.377~378
2.熊仁洲,劉復龍,“超深冷處理(Cryogenic Treatment)之簡 介”,金屬熱處理,第35期,1992,pp.61 3.S.Zhirafar,A.Rezaeian,M.Pugh,“Effect of cryogenic treatment on the mechanical properties of 4340 steel”,Journal of Materials Processing Technology,186 (2007),pp.298 4.大和久重雄(黃振賢譯),“超深冷處理”,金屬熱處理,76期, pp.77~78,2003 5.A.A.Khan and MI Ahmed,“Improving tool life using cryogenic cooling”,Journal of Materials Processing Technology, 2008,pp.153 6.Pete Pauli“Cold cuts”Cutting tool engineering, August 1992,pp.61~66 7.R.D.McCright,“Stress Corrosion Cracking and Hydrogen Embrittlement Of Iron Base Alloy, edited by R.W.Staehle”, J.Hochmann,R.D.McCright and J.E.Slater,NACE,Huston,Texas,pp306,1977 8.褚武揚,“幾種氫脆的機裡之比較研究”,防蝕工程,第6卷第2 期,1992 9.H.G.Nelson,“Hydrogen Embrittlement Testing ASTM,STP543,pp152,1972 10.I.M.Bernsteini,Mater.Sci.Eng.,Vol.6,pp.1,1976 11.zapffe,c.,sims,c.,Trans. AIME, Vol. 145, pp.225, 1941. 12.N.J.Petch, and P.Stables, Nature,Vol.169,pp.842,1952 13.A.R.Troiano,Trans.ASM,Vol.52,pp.54,1960 14.P.Batien, and P.Azou,Proc.Of World Met.Cong.,1st.,ASM.,pp.535,1951 15.C.D.Beachem,Met.Trans, Vol.3,pp.437,1972 16.G.M.Pressouyre,Phd Thesis,Carnegie-Mellon University,1972 17.M.Smialowski,Hydrogen in steels, Pergamon Press,pp212,1962 18.H.H.Johnson,J.G.Morle and A.R.Troiano, Trans. Met. Soc.of AIME,Vol.8,pp.526,1958 19.R.A.Oriani,Ann.Rev.Mater.sci.Vol.8,pp327,1978 20.L.J.R.Cohen,J.A.Charles, and G.C. Smith, Hydrogen Effects on Materials behavior, edited By N.R. Moody and A.W. Thompson, pp363,1990 21.G.M.Pressouyre, Metall.Trans.,pp1571,1979 22.N.R.Quick and H.H.Johnsin, Acta Metall,vol.26,pp903,1978 23.鄭旭里,“回火麻田散鐵組織之氫含量、擴散係數及氫脆性之研 究”,國立台灣大學材料工程研究所,碩士論文,1986 24.T.Asaoka“Metal-Hydrogen system”ed,by T.N. Veeiroglo, Pergamon Press,pp197,1982 25.吳建國,“金屬材料在氫氣能源工業上破壞的問題”材料科學, 第18B卷.第1期,pp14~16,1986 26.王志峰,“滾針軸承保持架用材料之電鍍氫脆研究”,國立中央 大學機械工程研究所,碩士論文,2006 27.徐祖耀、黃本立、鄢國強“材料表徵與檢測技術”中國材料工程 大典,第26 卷,pp629,2006 28.Jarmila Woodtli, Rolf Kieselbac“Damage due to hydrogen embrittlement And stress corrosion cracking ” Engineering Failure Analysis ,pp437,2000 29.T.J.Carter,L.A.Cornish,“Hydrogen in metals”Engineering Failure Analysis,pp121,1999 30.“鋼及其熱處理”,家恩出版社,pp124 31.吳建國,“氫氣對金屬材料之影響”材料學報,第18卷,第8 期,pp119~120,2004 32.E,Snape,Corrosion,24,pp261,1968 33.P.Bearpark, Ph.D. Thesis, University of London,1966 34.J.W.Kennedy and J.A.Whittaker, Corrosion Sci.,8,pp359,1968 35.J.F.Newman and L.L.Shereir,JISI,vol.207,pp1369,1969 36.Kai-Di CHANG,Jia-Lin GU,Hong-Sheng Fang,Zhi-Gang YANG,Bing-Zhe BAI and Wen-Zheng ZHANG“Effects of Heat- treatment Process of a Novel Bainite/Martensite Dual- phase High Strength Steel on ItsSusceptibility to Hydrogen Embrittlement” ISIJ International,Vol.41 ,No.11,pp1397,2001 37.賴允森,“鉻鉬鋼之氫損傷研究”,國立台灣大學材料工程研究 所,碩士論文,1995 38.K.E Thelning,“Steel and its Heat Treatment” Bofors Handbook,pp106~109,1974 39.蘇青森,“真空技術”,東華書局,pp3~4,1999 40.勝俣和彥,“最近的真空熱處理及熱處理變形預測技術”,金屬 熱處理年會,pp20~22,2007 41.徐培欽,“金屬冷處理之精髓-超冷處理”,超深冷理應用系列報 導,台灣超冷處理科技股份有限公司,1997 42.A. Molinari, M. Pellizzari, S. Gialanella, G.Straffelini and K.H.Stiasny, “Effect of Deep Cryogenic Treatment on the Mechanical Properties of Tool Steels”, Journal of Materials Processing Technology,2001,Vol.118,pp.350-355. 43.張道弘,“PID控制理論與實務”,全華圖書公司,pp5,1995 44.黃振賢,“金屬熱處理”,文京圖書公司,pp318,2000 | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/41561 | - |
dc.description.abstract | 為了改善一般超深冷處理設備的缺點,本研究設計以浮力帶動工件的超深冷處理裝置和PID溫度控制裝置,來實施超深冷處理。將工件從室溫緩慢而穩定地冷卻至液態氮的溫度,保持適當的時間,使其內應力完全釋放,組織結構達到安定化,以提升其使用壽命。與一般工業上所用的超深冷處理設備比較,本計畫所開發的浮力式超深冷和PID溫度控制裝置之特點為:其所能達到的溫度較低,處理效果較好;而且降溫、升溫的速率較為穩定平滑,不會有溫度突升或突降的情形發生,故處理後的工件完全沒有熱應力;此外,也能顯著節省液態氮的消耗,降低超深冷處理的成本。
工業上有很多種方式,使金屬獲得鍍層,包括電鍍、物理氣相沈積、離子鍍、化學鍍、熱浸鍍等等,其中可沈積金屬應用最多最廣的為電鍍工業。電鍍為一種氧化還原反應,將所要被鍍鍍層的工件放在陰極,欲想鍍的金屬放在陽極,放入欲鍍層的金屬液,通以電源後表面即得到想要的鍍層。產品施以電鍍時,由於陰極會產生氫氣,而氫原子滲入產品表層及內部,導致產品韌性降低,受力時產生氫脆現象。一般在工業上解決的方法為將產品加熱到一定的溫度,使得固溶在產品中的氫原子擴散出來,以恢復韌性,但此種方法容易犧牲其硬度,使得產品強度降低。本研究擬採用氫的溶解度隨著溫度降低而減少的原理,將電鍍後的縫紉車針,以適當穩定的降溫速率冷至液態氮溫度(-196℃),保持一段時間使其固溶在縫紉車針中的氫原子擴散出來,再以適當速率回升到室溫或室溫以上,而完成超深冷脫氫處理。實驗過程先在不同條件下將電鍍後的縫紉車針烘烤加熱,再實施適當的超低溫處理,並分別測試硬度、彎斷角度、氫含量,以了解其脫氫效果,進而尋求最佳脫氫處理條件。跟傳統比起來,除了改變不同加熱烘烤參數外,還對烘烤後的縫紉車針施以超低溫處理,以促進其脫氫效果。此外,超深冷處理對於縫紉車針的基材組織而言,也有安定化而延長其使用壽命的效果。 | zh_TW |
dc.description.abstract | To improve the disadvantages of the apparatus in the cryogenic treatment, a design of buoyancy-drive and a PID temperature control apparatus were applied for cryogenic treatment in this research. With the purpose of extending the service life, workpieces were cooled down slowly and steadily from room temperature to the temperature of liquid nitrogen, kept for an appropriate period of time for the relaxation of inner stress and the stabilization of microstructures. Compared with the cryogenic equipment used in industries, the buoyancy-drive cryogenic apparatus designed in this research has the following features: lower temperatures could be reached, thus resulting in better effects of treatment; the temperature variation rates were steadier and smoother, without the occurrences of abrupt rises or falls in temperatures, thus, no thermal stress would be induced in the workpiece. Besides, the consumption rate of liquid nitrogen was relatively low, and the cost of cryogenic treatment could be reduced.
There are many methods in industry for metals to attain coated layers, including electroplating, physical vapor deposition, ion coating, chemical coating, thermal immersed coating, etc. Among these the most widely used method is electroplating. Electroplating is an oxidation-reduction reaction, in which the workpiece needed for coating is placed at the cathode, with the desired coated metal layer at the anode, and then placed into the metallic liquid of the desired coating layer. When power source is applied, the surface will attain the desired coating layer. During electroplating process, hydrogen generated at the cathode will penetrate into the interiors of the products and decrease the toughness of products. This is the so-called hydrogen embrittlement. To solve this problem, the products are reheated to an appropriate temperature and kept for a period of time. Thus, the hydrogen atoms dissolved in the products will be released, and the toughness and ductility of the products will be recovered. But, this method tends to lower the hardness of the products. In this study, cryogenic dehydrogenation was accomplished by adapting the principle that the solubility of hydrogen in steels reduces with temperature. Electroplated sewing needles were cooled down to the temperature of liquid nitrogen (-196℃), and kept for a period of time to release the hydrogen atoms dissolved in them. Then, temperatures were raised back to or above the room temperature with appropriate rates. In the experimental process, electroplated sewing needles were baked under various conditions in advance to the cryogenic treatment. The hardness, bending angle, hydrogen amount of the specimens were then tested respectively to understand the effect of dehydrogenation. Thus, optimized dehydrogenation treatment conditions could be attained. Compared to traditional dehydrogenation treatment, in this research, besides altering different baking parameters, cryogenic treatments were also applied to the baked sewing needles in order to promote the effect of dehydrogenation. Moreover, cryogenic treatment also has the effect to stabilize the microstructure of the sewing needle and extend its service life. | en |
dc.description.provenance | Made available in DSpace on 2021-06-15T00:23:05Z (GMT). No. of bitstreams: 1 ntu-98-R95522724-1.pdf: 3614797 bytes, checksum: ce65783c52b0a8b09fed33e7ed58580e (MD5) Previous issue date: 2009 | en |
dc.description.tableofcontents | 目 錄
口試委員審定書.............................................I 誌謝......................................................II 中文摘要.................................................III 英文摘要..................................................IV 第一章 緒論.............................................1 1.1 前言..........................................1 1.2 研究動機與目的................................3 第二章 實驗理論.........................................4 2.1 超深冷處理簡介......................................4 2.1.1 超深冷目的及特點.........................4 2.1.2 現況超深冷設備於工業上的使用現況.........5 2.2 電鍍理論............................................7 2.2.1 電鍍的定義與目的.........................7 2.2.2 鉻的性質.................................7 2.2.3 鉻的特性.................................7 2.2.4 鍍鉻的影響因素....................................7 2.3 電鍍氫脆......................................8 2.4 氫滲入和存在於材料中的形式........................9 2.5 氫脆機構...........................................10 2.5.1 氫脆對於材料機械性質的影響..............11 2.5.2 氫臨界濃度與補集位置的關係..............11 2.5.3 氫脆破壞的形式..........................12 2.5.4 不同微觀組織對氫脆的影響................14 2.6 電鍍後之氫移除方法...........................15 2.7 真空處理.....................................16 第三章 實驗設備與方法..................................18 3.1 實驗規劃.....................................18 3.2 實驗設備.....................................19 3.2.1 試片成分與規格..........................19 3.2.2 脫氫加熱爐..............................19 3.2.3 真空電熱設備............................19 3.2.4 浮力帶動工件之超深冷設備................19 3.2.5 PID控制超深冷設備.......................20 3.2.6 實驗儀器................................21 3.3 實驗方法.....................................21 3.3.1 浮力帶動工件之控制方法..................21 3.3.2 超深冷PID程式控制方法...................22 3.3.3 脫氫烘烤處理............................24 3.3.3.1 空氣中烘烤加熱...................24 3.3.3.2 氧氣中烘烤脫氫...................24 3.3.3.3 真空脫氫.........................25 3.3.4 超深冷處理..............................26 3.4 縫紉車針工件熱處理後的試驗與分析.............26 3.4.1 硬度試驗................................26 3.4.2 韌性試驗................................27 3.4.2.1 桿件彎曲法.......................27 3.4.2.2 試驗步驟.........................27 3.4.3 顯微組織觀察............................28 3.4.4 電子掃描顯微鏡觀察(SEM) ................28 3.4.5 測氫儀..................................28 第四章 結果與討論......................................29 4.1 超深冷設備的比較.............................29 4.1.1 現況工業界所用的超深冷設備及溫度曲線....29 4.1.2 PID程控超深冷設備與溫度曲線及處理效果...30 4.1.3 浮力帶動工件之超深冷設備與溫度曲線......31 4.1.4 本實驗超深冷處理裝置的特點.......................32 4.2 不同氣氛中烘烤加熱及其後超深冷之脫氫比較.....33 4.2.1 不同氣氛中烘烤及其後再超深冷對硬度的影響33 4.2.2 不同氣氛中烘烤及其後再超深冷對韌性的影響33 4.2.3 不同氣氛中烘烤脫氫對顯微組織的影響......34 4.2.4 不同氣氛中烘烤脫氫對破斷面的影響........34 4.2.5 不同氣氛中烘烤及其後再超深冷對含氫量的影響34 第五章 結論............................................36 參考文獻..................................................89 | |
dc.language.iso | zh-TW | |
dc.title | 超深冷設備改良及其在電鍍工件脫氫上之應用 | zh_TW |
dc.title | The Improvement of the Cryogenic Equipment and the Application on the Dehydrogenation of Electroplated Carbon Steel | en |
dc.type | Thesis | |
dc.date.schoolyear | 97-1 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 黃振賢,陳繁雄,周挺正 | |
dc.subject.keyword | 縫紉車針,電鍍,超深冷處理,真空加熱,氧氣加熱,韌性,脫氫, | zh_TW |
dc.subject.keyword | Sewing needles,Electroplating,Cryogenic treatment,Vacuum heating,Oxygen heating,Toughness,Dehydrogenation, | en |
dc.relation.page | 91 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2009-02-02 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-98-1.pdf 目前未授權公開取用 | 3.53 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。