請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/41207
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 韋文誠 | |
dc.contributor.author | "Yen-Wen, Lo" | en |
dc.contributor.author | 駱嬿雯 | zh_TW |
dc.date.accessioned | 2021-06-14T17:23:54Z | - |
dc.date.available | 2010-08-04 | |
dc.date.copyright | 2008-08-04 | |
dc.date.issued | 2008 | |
dc.date.submitted | 2008-07-24 | |
dc.identifier.citation | [1] R. G. Harn, “Surface Forces and Their Action in Ceramic Materials”, J. Am. Ceram. Soc., 73 [5] 1117-1135 (1990)
[2] J. S. Reed, Principles of Ceramics Processing-2ed, John Wiley and Sons, New York, 1995 [3] W. Baumgart, A. C. Dunham, and G. C. Amstutz, Eds., Process Mineralogy of Ceramic Materials, Elsevier, New York, 1984 [4] A. Capmas, D. Menetrier-Sorrentino, and D. Damidot, “Effect of Temperature on Setting Time of Calcium Aluminate Cement”, Chapman and Hall, London, U. K., 1990, pp.65-80 [5] A. Rettel, W. Gessner, D. Muller, and G. Scheler, “On the Hydration of CaAl2O4 at Various Temperature”,Br. Ceram. Trans. J., 84, 25-28, 1985 [6] S. M Bushnell-Watson and J. H. Sharp, “On the Course of Anomalous setting Behavior with Respect to Temperature of Calcium Aluminate Cements ”, Cem. Concr. Res., 20, 677-686 (1990) [7] A. Rettel, W. Gessner, D. Muller, and G. Scheler, “ On the Hydration of CaAl2O3 at Various Temperature” Br. Ceram. Trans. J., 84, 25-28 (1985) [8] W. J. Wei, S. D. Tze and H. C. Liaw, 2005, “Calcium Aluminate Composites with Controlled Duplex Structures: I. Hydration Reaction and Densification, “ J. Ceram. Proc. Res., 6[3] 223-229 [9] J. S. Reed, Principles of Ceramics Processing-2ed, John Wiley and Sons, New York, 1995 [10]Y.-M. Chiang, D. P Brinie III, W. D. Kingery., Physical Ceramics: principles for ceramic science and engineering, John Wiley and Sons, New York, 1996, p.351-355 [11] A. R. Studart, U. T. Gonzenbach, E. Tervoort, L. Gauckler, “Processing routes to macroporous ceramics”, J. J. Am Ceram. Soc., 89, 1771-1789, (2006) [12] S. I. Kam and W. R. Rossen, “Anomalous Capillary Pressure, Stress, and Stability of Solids-Coated Bubbles”, J. Colloid and Interface Science, 213, 329–339 (1999) [13] X. W. Zhu, D. L. Jiang, S. H. Tan, and Z. Q. Zhang, ‘‘Improvement in the Strut Thickness of Reticulated Porous Ceramics,’’ J. Am. Ceram. Soc., 84 [7] 1654–6 (2001). [14] L. Montanaro, Y. Jorand, G. Fantozzi, and A. Negro, ‘‘Ceramic Foams by Powder Processing,’’ J. Eur. Ceram. Soc., 18 [9] 1339–50 (1998). [15] J. Saggio-Woyansky, C. E. Scott, and W. P. Minnear, ‘‘Processing of Porous Ceramics,’’ Am. Ceram. Soc. Bull., 71 [11] 1674–82 (1992). [16] F. F. Lange and K. T. Miller, ‘‘Open-Cell, Low-Density Ceramics Fabricated from Reticulated Polymer Substrates,’’ Adv. Ceram. Mater., 2 [4] 827–31 (1987). [17] J. M. Tulliani, L. Montanaro, T. J. Bell, and M. V. Swain, ‘‘Semiclosed-Cell Mullite foams: Preparation and Macro- and Micromechanical Characterization,’’ J. Am. Ceram. Soc., 82 [4] 961–8 (1999). [18] J. Saggio-Woyansky, C. E. Scott, and W. P. Minnear, ‘‘Processing of Porous Ceramics,’’ Am. Ceram. Soc. Bull., 71 [11] 1674–82 (1992). [19] M. D. M. Innocentini, P. Sepulveda, V. R. Salvini, V. C. Pandolfelli, and J. R. Coury, ‘‘Permeability and Structure of Cellular Ceramics: A Comparison Between Two Preparation Techniques,’’ J. Am. Ceram. Soc., 81 [12] 3349–52 (1998). [20] P. Colombo and J. R. Hellmann, ‘‘Ceramic Foams from Preceramic Polymers,’’ Mater. Res. Innovations, 6 [5–6] 260–72 (2002). [21] R. A. White, E. W. White, and J. N. Weber, ‘‘Replamineform—New Process for Preparing Porous Ceramic,Metal, and Polymer Prosthetic Materials,’’ Science, 176 [4037] 922 (1972). [22] D. P. Skinner, R. E. Newnham, and L. E. Cross, ‘‘Flexible Composite Transducers,’’ Mater. Res. Bull., 13 [6] 599–607 (1978). [23] Z. T. Liu, T. X. Fan, W. Zhang, and D. Zhang, ‘‘The Synthesis of Hierarchical Porous Iron Oxide with Wood Templates,’’ Microporous Mesoporous Mater., 85 [1–2] 82–8 (2005). [24] T. Ota, M. Imaeda, H. Takase, M. Kobayashi, N. Kinoshita, T. Hirashita, H. Miyazaki, and Y. Hikichi, ‘‘Porous Titania Ceramic Prepared by Mimicking Silicified Wood,’’ J. Am. Ceram. Soc., 83 [6] 1521–3 (2000). [25] M. Mizutani, H. Takase, N. Adachi, T. Ota, K. Daimon, and Y. Hikichi, ‘‘Porous Ceramics Prepared by Mimicking Silicified Wood,’’ Sci. Technol. Adv. Mater., 6 [1] 76–83 (2005). [26] J. Cao, C. R. Rambo, and H. Sieber, ‘‘Manufacturing of Microcellular, Biomorphous Oxide Ceramics from Native Pine Wood,’’ Ceram. Int., 30 [7] 1967–70 (2004). [27] J. Cao, O. Rusina, and H. Sieber, ‘‘Processing of Porous TiO2-Ceramics from Biological Preforms,’’ Ceram. Int., 30 [7] 1971–4 (2004). [28] R. A. Lopes and A.M. Segadaes, ‘‘Microstructure, Permeability and Mechanical Behaviour of Ceramic Foams,’’ Mater. Sci. Eng. A—Struct. Mater. Prop. Microstruct. Process., 209 [1–2] 149–55 (1996). [29] B. P. Kumar, H. H. Kumar, and D. K. Kharat, ‘‘Study on Pore-Forming Agents in Processing of Porous Piezoceramics,’’ J. Mater. Sci.—Mater. Electronics, 16 [10] 681–6 (2005). [30] P. Colombo and E. Bernardo, ‘‘Macro- and Micro-Cellular Porous Ceramics from Preceramic Polymers,’’ Composites Sci. Technol., 63 [16] 2353–9 (2003). [31] J. Luyten, S. Mullens, J. Cooymans, A. M. De Wilde, and I. Thijs, ‘‘New Processing Techniques of Ceramic Foams,’’ Adv. Eng. Mater., 5 [10] 715–8 (2003). [32] I. Thijs, J. Luyten, and S. Mullens, ‘‘Producing Ceramic Foams with Hollow Spheres,’’ J. Am. Ceram. Soc., 87 [1] 170–2 (2004). [33] H. Katsuki, A. Kawahara, and H. Ichinose, ‘‘Preparation and Some Properties of Porous Alumina Ceramics Obtained by the Gelatination of Ammonium Alginate,’’ J. Mater. Sci., 27 [22] 6067–70 (1992). [34] P. Colombo, E. Bernardo, and L. Biasetto, ‘‘Novel Microcellular Ceramics from a Silicone Resin,’’ J. Am. Ceram. Soc., 87 [1] 152–4 (2004). [35] Y. Hotta, P. C. A. Alberius, and L. Bergstrom, ‘‘Coated Polystyrene Particles as Templates for Ordered Macroporous Silica Structures with Controlled Wall Thickness,’’ J. Mater. Chem., 13 [3] 496–501 (2003). [36] J. M. Bouler, M. Trecant, J. Delecrin, J. Royer, N. Passuti, and G. Daculsi, ‘‘Macroporous Biphasic Calcium Phosphate Ceramics: Influence of Five Synthesis Parameters on Compressive Strength,’’ J. Biomed. Mater. Res., 32 [4] 603–9 (1996). [37] O. Lyckfeldt and J. M. F. Ferreira, ‘‘Processing of Porous Ceramics by Starch Consolidation,’’ J. Eur. Ceram. Soc., 18 [2] 131–40 (1998). [38] A. Imhof and D. J. Pine, ‘‘Ordered Macroporous Materials by Emulsion Templating,’’ Nature, 389 [6654] 948–51 (1997). [39] I. Akartuna, A. R. Studart, U. T. Gonzenbach, E. Tervoort, and L. J. Gauckler, ‘‘Porous Ceramics from Particle-Stabilized Emulsions,’’ Adv. Mater., (2006), in Preparation. [40] B. P. Binks, ‘‘Macroporous Silica from Solid-Stabilized Emulsion Templates,’’ Adv. Mater., 14 [24] 1824–7 (2002). [41] D. Walsh and S. Mann, ‘‘Synthesis of Cellular Inorganic Films from Self- Organized Media,’’ Adv. Mater., 9 [8] 658–62 (1997). [42] D. Koch, L. Andresen, T. Schmedders, and G. Grathwohl, ‘‘Evolution of Porosity by Freeze Casting and Sintering of Sol–Gel Derived Ceramics,’’ J. Sol–Gel Sci. Technol., 26 [1–3] 149–52 (2003). [43] T. J. Fitzgerald, V. J. Michaud, and A. Mortensen, ‘‘Processing of Microcellular Sic Foams. 2. Ceramic Foam Production,’’ J. Mater. Sci., 30 [4] 1037–45 (1995). [44] Y. Beppu, M. Ando, and T. Ohji, ‘‘Control of Porosity and Pore Size for Porous Alumina Prepared from Alpha-Alumina, BaSO4 and/or SrSO4,’’ Int. J. Mater. Product Technol., 209–14 (2001). [45] H. Wang, I. Y. Sung, X. D. Li, and D. Kim, ‘‘Fabrication of Porous SiC Ceramics with Special Morphologies by Sacrificing Template Method,’’ J. Porous Mater., 11 [4] 265–71 (2004). [46] M. Rajamathi, S. Thimmaiah, P. E. D. Morgan, and R. Seshadri, ‘‘Macroporous Materials from Crystalline Single-Source Precursors Through Decomposition Followed by Selective Leaching,’’ J. Mater. Chem., 11 [10] 2489–92 (2001). [47] H. Kim, C. da Rosa, M. Boaro, J. M. Vohs, and R. J. Gorte, ‘‘Fabrication of Highly Porous Yttria-Stabilized Zirconia by Acid Leaching nickel from a Nickel–Yttria-Stabilized Zirconia Cermet,’’ J. Am. Ceram. Soc., 85 [6] 1473–6 (2002). [48] P. Sepulveda and J. G. P. Binner, ‘‘Processing of Cellular Ceramics by Foaming and In Situ Polymerisation of Organic Monomers,’’ J. Eur. Ceram. Soc., 19 [12] 2059–66 (1999). [49] E. P. Santos, C. V. Santilli, and S. H. Pulcinelli, ‘‘Formation of Zirconia Foams Using the Thermostimulated Sol–Gel Transition,’’ J. Non-Crystalline Solids, 304 [1–3] 143–50 (2002). [50] S. Dhara and P. Bhargava, ‘‘A Simple Direct Casting Route to Ceramic Foams,’’ J. Am. Ceram. Soc., 86 [10] 1645–50 (2003). June 2006 Processing Routes to Macroporous Ceramics 1787 [51] J. A. Delgado, I. Harr, A. Almirall, S. del Valle, J. A. Planell, and M. P. Ginebra, ‘‘Injectability of a Macroporous Calcium Phosphate Cement’’; pp. 157– 60 in Bioceramics, Vol. 17, Key Engineering Materials. Edited by P. Li and C. W. Colwell. Trans Tech Publications Ltd., Zurich-Uetikon, 2005. [52] X. Bao, M. R. Nangrejo, and M. J. Edirisinghe, ‘‘Synthesis of Silicon Carbide Foams from Polymeric Precursors and their Blends,’’ J. Mater. Sci., 34 [11] 2495– 505 (1999). [53] W. P. Minnear, ‘‘Processing of Foam Ceramics’’; pp. 146–56 in Forming Science and Technology for Ceramics, Edited by M. J. Cima. American Ceramic Society, Westerville, 1992. [54] H. X. Peng, Z. Fan, J. R. G. Evans, and J. J. C. Busfield, ‘‘Microstructure of Ceramic Foams,’’ J. Eur. Ceram. Soc., 20 [7] 807–13 (2000). [55] H. X. Peng, Z. Fan, and J. R. G. Evans, ‘‘Cellular Arrays of Alumina Fibres,’’ J. Mater. Sci., 36 [4] 1007–13 (2001). [56] H. X. Peng, Z. Fan, and J. R. G. Evans, ‘‘Factors Affecting the Microstructure of a Fine Ceramic Foam,’’ Ceram. Int., 26 [8] 887–95 (2000). [57] E. Williams and J. R. G. Evans, ‘‘Expanded Ceramic Foam,’’ J. Mater. Sci., 31 [3] 559–63 (1996). [58] T. Fujiu, G. L. Messing, and W. Huebner, ‘‘Processing and Properties of Cellular Silica Synthesized by Foaming Sol Gels,’’ J. Am. Ceram. Soc., 73 [1] 85–90 (1990). [59] T. Tomita, S. Kawasaki, and K. Okada, “A Novel Preparation Method for Foamed Silica Ceramics by Sol–Gel Reaction and Mechanical Foaming,” J.Porous Mater., 11 [2] 107–15 (2004). [60] G. T. Chandrappa, N. Steunou, and J. Livage, ‘‘Materials Chemistry— Macroporous Crystalline Vanadium Oxide Foam,’’ Nature, 416 [6882] 702 (2002). [61] Z. P. Du, M. P. Bilbao-Montoya, B. P. Binks, E. Dickinson, R. Ettelaie, and B. S. Murray, ‘‘Outstanding Stability of Particle-Stabilized Bubbles,’’ Langmuir, 19 [8] 3106–8 (2003). [62] E. Dickinson, R. Ettelaie, T. Kostakis, and B. S. Murray, “Factors Controlling the Formation and Stability of Air Bubbles Stabilized by Partially Hydrophobic Silica Nanoparticles,” Langmuir, 20 [20] 8517–25 (2004). [63] B. P. Binks and T. S. Horozov, ‘‘Aqueous Foams Stabilized Solely by Silica Nanoparticles,’’ Angewandte Chemie—Int. Ed., 44 [24] 3722–5 (2005). [64] U. T. Gonzenbach, A. R. Studart, E. Tervoort, and L. J. Gauckler, ‘‘Ultrastable particle-stabilized foams,’’ Angewandte Chemie—Int. Ed [65] U. T. Gonzenbach, A. R. Studart, E. Tervoort, and L. J. Gauckler, “Tailoring the Microstructure of Particle-Stabilized Wet Foams”, Langmuir 2007, 23, 1025-1032 [66] A. R. Studart, U. T. Gonzenbach, E. Tervoort, and L. J. Gauckler, “Processing Routes to Macroporous Ceramics: A Review”, J. Am. Ceram. Soc., 89 [6] 1771–1789 (2006) [67] Charles Kittel , “Introduction to Solid State Physics-2ed edition,” Wiley , New York , 1956 [68] D. W. LEE and W. D. KINGERY, “Radiation Energy Transfer and Thermal Conductivity of Ceramic Oxides”, Journal of The American Ceramic Society, Vol. 43, No. 11 [69] W. D. Kingery, H. K. Bowen and Uhlmann, “Introduction to ceramics-2nd ed”, Wiley, New York, 1976 [70] W.D.Kingery, “thermal conductivity:XIV, Conductivity of multicomponent systems”, Journal of The American Ceramic Society, Vol. 42, No. 12 [71] Y.-W. Tsao, “The Relationship between Human Body Temperature on the Skin Surface and Indoor Temperature Under Different Wind Speeds and Different Quantity of Activity”, Journal of ST. John's, Vol. 23, 2006 [72] S. Gu, T. J. Lu, D. D. Hass and H. N. G. Wadley, “Thermal Conductivity of Zirconia Coatings with Zig-Zag Pore Microstructure”, Acta mater. 49, 2539–2547 (2001) [73] P. Atkin, J. D. Paula, ATKINS’ Physical Chemistry-7th ed, Oxford, New York, 2002 [74] M. W. Barsoum, Fundamentals of Ceramics, McGRAW-Hill, U.S.A, 2000 [75]S.O. Kasap, Optoelectronics and Photonics: Principles and Practices, Prentice-Hall, 2001 [76] H. C.van de Hulst, Light Scattering by Small Particles, Dover, New York, 1981 [77]L. Braginsky, “High-temperature thermal conductivity of porous Al2O3 nanostructures” Acta mater. 49, 2539–2547 (2001) [78]汪建民,陶瓷技術手冊(上),中華民國粉末冶金協會與中華民國產業科技發展協進會出版,1994 [79] KLARSFELD, S, guarded hot plate method for thermal conductivity measurements, Compendium of Thermophysical Property Measurement Methods. Vol. 1. Survey of Measurement Techniques. Edited by K.D. Maglic, A. Cezairliyan and V.E. Peletsky. New York and London, Plenum Press, 1984, p.169 [80] D. Poulikaks, “Conduction Heat Transfer”, Prentic-Hall, USA, pp. 145-220, 1994 [81]I. DeWitt, Fundamentals of Heat and Mass Transfer, John Wiley and Sons, USA, 1996 [82]鄭永傑, “卜作嵐材料及細粒料對水泥獎體熱傳導値係數之影響”, 國立台灣科技大學營建工程系碩士論文,2002年 [83] F. Oberhettinger, L. Badii, “Table of Laplace Transform”, Springer-Verlag, Berlin, Germany, pp. 338, 1973 [84] S. Andre, B. Remy, F. R. Pereira and N. Cella, and A. J. Silva Neto, Hot wire method for the thermal characterization of materials: inverse problem application, Engenharia Termica, no 4, 2003 p. 55-64 [85] Y. Nagasaka and A. Nagashima, simultaneous measurement of the thermal conductivity and the thermal diffusivity of liquids by the transient hot-wire method, Rev. Sci. Instrum, Vol(52), No.2, February 1981 [86] C. Takai, M. Fuji, and M. Takahashi, “A novel surface designed technique to disperse silica nano particle into polymer,” Colloids and Surface A: Physicohem. Eng. Aspects 292(2007) 79-82 [87] B. George, P. Mclntyre, Analytical chemistry by open learnin, JOHN WILEY and SONS, U.K, 2001 [88] R. A. Focru, M. J. Rurnpnrono, “The solubility of carbon dioxide in rhyolitic melts: A quantitative FTIR study”, American Mineralogist, Volume 7 5, pages 13 I 1-1326, 1990 [89] Y.-M. Chiang, D. P Brinie III, W. D. Kingery., Physical Ceramics: principles for ceramic science and engineering, John Wiley and Sons, New York, 1996, p.34 [90] Y. Kate, N. Yamashita, K. Kobayashi and Y. Yoshizawa, “Kinetic study of the hydration of magnesium oxide for a chemical heat pump” Applied Thermal Engineering Vol. 16, No. 11, pp. 853-862, 1996 [91] L. A. Pugnaloni, E. Dickinson, R. Ettelaie, A. R. Mackie, and P. J. Wilde, ‘‘Competitive Adsorption of Proteins and Low-Molecular-Weight Surfactants: Computer Simulation and Microscopic Imaging,’’ Adv. Colloid Interf. Sci., 107 [1] 27–49 (2004) [92] Seung I. Kam and William R. Rossen1, “Anomalous Capillary Pressure, Stress, and Stability of Solids-Coated Bubbles”, Journal of Colloid and Interface Science 213, 329–339 (1999) [93]R. Eisberg and R. Resnick, Quantum Physics of Atoms, Molecules, Solids, Nuclei, and Particles-2ed, Jonm Wiley and Sons, USA, 1985 [94]W. D. Nesse, Introduction to Optical Mineralogy-2ed, Oxford, New York, 1991 [95] Y.-M. Chiang, D. P Brinie III, W. D. Kingery., Physical Ceramics: principles for ceramic science and engineering, John Wiley and Sons, New York, 1996, p.110-111 [96] U.S. Department of Energy, Fuel Cells Handbook-7th, EG and G Technical SERVICE, inc., 2004 [97] A. Maqsood, M. A.-u.-Rehman,V. Gumen, and A.-u.-Haq, “Thermal conductivity of ceramic fibres as a function of temperature and press load”, J. Phys. D: Appl. Phys. 33 (2000) 2057–2063. [98] I. DeWitt, Fundamentals of Heat and Mass Transfer, John Wiley and Sons, USA, 1996, p. 788 | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/41207 | - |
dc.description.abstract | 摘要
本研究主要採用膠粒分散及打泡法,將氣泡均勻分散在陶瓷漿料中,經適當的微波乾燥及燒結步驟,製備出孔隙率在85 %以上的多孔陶瓷,並使用不同材料種類、觀察微結構,了解這些因素對於熱傳導之影響。實驗中,分別以SDS和valeric acid當作起泡劑,利用直接泡沫法(Direct Foaming Method, DFM)做出孔隙率高達85 % ~ 95%的多孔氧化鋁,氧化鋯及雲母。經由掃描式電子顯微鏡(SEM-EDX)分析,發現製出的多孔陶瓷氣胞平均尺寸在17 um到80 um之間,且包含緻密與不緻密的兩種氣胞壁。利用熱機械性質分析(TMA)觀察不同孔隙率的多孔陶瓷對燒結溫度的影響。光學部份,經由快速傅立葉轉換紅外線光譜儀(FTIR)分析多孔陶瓷在1000 cm-1到4000 cm-1被散射的情況,及比較孔隙率、晶粒與氣胞壁對衰減係數之影響。在熱傳導分析部份,以熱線法(hot-wire method)自行組裝熱傳分析儀器,利用標準樣品做校正後,量測分析比較多孔陶瓷的孔隙率、晶粒大小、氣胞壁緻密度、以及固溶物與氧空缺對熱傳導係數的影響。本研究製備95 %孔隙率的氧化鋁有最佳隔熱性,其在室溫的熱傳係數為0.05 W/m*oC,在800oC為0.17 W/m*oC。 | zh_TW |
dc.description.abstract | This study used colloidal dispersion and direct foaming method to distributed bubbles uniformly in ceramic slurry. After microwave drying and appropriate sintering, the porous ceramics with porosity 85 ~ 95 % were made. The effects of material and porous structure on thermal conductivity are investigated in this study. Porous Al2O3, ZrO2 and mica with porosity higher than 85 % are foamed by the direct foaming method with SDS and valeric acid as surfactants. The gas cells of porous ceramics in an average bubble size with the range of 17 um to 80 um were characterized by scanning electron microscope equipped with energy dispersive spectroscopy (SEM-EDX). Two different cell walls with dense and non-dense profiles exist in the porous samples. Thermal mechanical analysis (TMA) was used to analyze the sintering behaviors of porous ceramics with different porosities. Light scattering between 1000 cm-1 and 4000 cm-1 were investigated by Fourier Transform Infrared Spectroscopy (FTIR). The instrumental set-up for measuring thermal conductivity by a hot-wire method was calibrated by the standard sample. The thermal conductivities of porous ceramics with different porosity, grain size, cell walls, and defects are observed and compared to each other. Consequently, small k value of 0.05 W/m*oC at room temperature and 0.17 W/m*oC at 800oC of one Al2O3 foam with the porosity of 95 % can be reached in this study. | en |
dc.description.provenance | Made available in DSpace on 2021-06-14T17:23:54Z (GMT). No. of bitstreams: 1 ntu-97-R95527039-1.pdf: 8675432 bytes, checksum: 52da139b13e7eec9803a24445657dfe3 (MD5) Previous issue date: 2008 | en |
dc.description.tableofcontents | Content
Chapter 1. Introduction 1 Chapter 2 Literature Review 3 2-1 Fundamentals of Processing of Porous Green Ceramics 3 2-1-2 Hydration Reaction 3 2-1-2 Surface Phenomena 5 (a) Surface Tension and Surface Energy 5 (b) Surface Curvature and Pressure 6 2-1-3 Bubble Stability 6 (a) Stability of Bubbles 6 (b) Foam Destabilization 7 2-2 Processing Methods of Porous Ceramics 10 2-2-1 Replica Method 10 2-2-2 Sacrificial Template Method 11 2-2-3 Direct Foaming Method 12 2-3 Thermal Conductivity by Phonon and Photon Conduction 16 2-3-1 Phonon Conduction 16 (a) Physical Definition and Theory of Phonons 17 (b) Influence Factors of Phonon Conductivity 19 2-3-2 Photon Conduction 21 (a) Physical Definition and Property of Photons 21 (b) Influence Factors of Photon Conductivity 22 2-3-3 Measurements of Thermal Conductivity 34 (a) Axial Flow Method 34 (b) Guarded Hot Plate Method 35 (c) Hot-Wire Method 36 Chapter 3 Experimental 43 3-1 Materials 43 3-2 Fabrication of Porous Ceramics 43 3-2-1 Foam Preparation 43 3-2-2 Drying and Sintering of Ceramic Foams 44 3-3 Characterization 45 3-3-1 Kinetic Analysis of Hydration 45 3-3-2 Microstructure Analysis 47 3-3-3 Porosity Measurement 47 3-3-4 Thermal Conductivity Measurement 48 (a) Instrument Set-up. 48 (b) Calibration. 48 3-3-5 FTIR Analysis 49 (a) Sample Preparation.. 49 (b) Sample Preparation for Porous Ceramics 50 (c) Calculation of Extinction Coefficient:. 50 3-3-6 TMA 51 Chapter 4 Results and Discussion 69 4-1 Hydration Reaction 69 4-2 Microstructure and Sintering Behavior 78 4-2-1 Microstructural Analysis of Porous Ceramics 78 (a) Al2O3 Foams 78 (b) ZrO2 Foams 80 (c) Mica Foams 80 4-2-3 Sintering Behavior 81 4-3 FTIR Analysis 102 4-3-1 Photon Transport 102 (a) Effect of Porous Ceramics 102 (b) Effect of Grain Size 103 (c) Effect of Gas-Cell Size 104 (d) Effect of Cell Walls of Triple Junctions 104 4-3-2 Extinction Coefficient 106 (a) Effects of Materials and Porosity 107 (b) Effect of Grain Size 108 (c) Effect of Gas-Cell Dense 108 4-4 Thermal Conductivity Analysis 119 4-4-1 Grain Size Effect 119 4-4-2 Porosity Effect 120 4-4-3 Effect of Atomic Defects 122 4-4-4 Effect of Dense Cell Wall on Thermal Conductivity 123 4-4-5 Effect of Photon Scattering 124 5. Conclusion 139 附錄一 多孔黏土陶瓷製作與分析 142 A-1 研究目的 142 A-2 結果與討論 142 (a) 黏土之TEM 分析 142 (b) 黏土之熱分析 143 (c) 多孔黏土之配方與SEM觀察 143 (d) 黏土熱傳導分析 143 Refrtrnce 151 | |
dc.language.iso | en | |
dc.title | 輕質多孔陶瓷的低熱傳與輻射阻隔之研究 | zh_TW |
dc.title | Low Thermal Conductivity and Radiation of Porous Ceramics | en |
dc.type | Thesis | |
dc.date.schoolyear | 96-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 王錫福,吳光鐘,謝宗霖 | |
dc.subject.keyword | 氧化鋁,氧化鋯,孔隙率,熱傳導,光譜分析,水合, | zh_TW |
dc.subject.keyword | Al2O3,ZrO2,porosity,thermal conductivity,FTIR,hydration, | en |
dc.relation.page | 157 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2008-07-26 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-97-1.pdf 目前未授權公開取用 | 8.47 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。