請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/40445完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 李志中 | |
| dc.contributor.author | Shih-Min Hsu | en |
| dc.contributor.author | 許世名 | zh_TW |
| dc.date.accessioned | 2021-06-14T16:47:50Z | - |
| dc.date.available | 2010-08-06 | |
| dc.date.copyright | 2008-08-06 | |
| dc.date.issued | 2008 | |
| dc.date.submitted | 2008-07-29 | |
| dc.identifier.citation | [1] Tong S., 1996, “Two-Step Method Without Harmonics Suppression In Error Separation,” Measurement Science And Technology, Vol. 7, pp. 1563-1568
[2] Zhang, G. X. and Wang, R. K., 1993, “Four-Point Method Of Roundness And Spindle Error Measurements,” CIRP Annals, Vol. 42, pp. 593-596 [3] Gao, Wei, Kiyono Satoshi and Nomura Tadatoshi, 1996,“A New Multiprobe Method Of Roundness Measurements,” Precision Engineering, Vol. 19, pp. 37-45 [4] Tu, Jay F., Bossmanns, Bernd and Hung, Spring C.C., 1997,“Modeling And Error Analysis For Assessing Spindle Radial Error Motions,” Precision Engineering, Vol. 21 pp. 90-101 [5] Okuyama, Eiki, 2000,“Roundness Measurement And The Radial Motion Measurement Based On The 3-Point Method Using The Inverse Filtering,” Proceedings Of SPIE - The International Society For Optical Engineering, Vol. 4222, pp. 427-431 [6] Fujimaki K., Sase, H. and Mitsui, K., 2008,”Effects Of Sensor Noise In Digital Signal Processing Of The Three-Point Method,” Measurement Science and Technology , Vol.19, pp. 015201 [7] Jeong, Gi-Bum, Kim, Dong Hwan and Jang, Dong Young, 2005,“Real Time Monitoring And Diagnosis System Development In Turning Through measuring a Roundness Error Based On Three-Point Method,” International Journal of Machine Tools and Manufacture , Vol. 45, pp. 1494-1503 [8] Zhang Yuhua, Wang Xiaolin, Zhang Guoxiong and Li Zhen, 1999,“Some Problems Of Error Separation Method In Roundness And Spindle Error Motion Measurements With Multiprobe,” Journal Of Beijing Institute Of Technology, Vol. 19, pp. 309-313 [9] Zhao, Jun-Zhong, Huang Hou-Kuan and Jia, Lian-Feng, 2003,“Error Separation Theory And Its Application In Computer-Aided Surface Flaw Detection Of Axle-Liked Parts,” Jiliang Xuebao/Acta Metrologica Sinica, Vol. 24, pp. 14-17 [10] Zhang Yu-Hua and Wang Xiao-Lin, 1998,“On The Precision Measurement Method For The Angular Positions Of The Probes In Three-Point Method,” Opticsand Precis Engineering, Vol. 6, pp. 39-45 [11] Muralikrishnan, B., Venkatachalam, S., Raja, J. and Malburg, M., 2005,“A Note On The Three-Point Method For Roundness Measurement,” Precision Engineering, Vol.29, pp. 257-260 [12] LEI Xian-Qing, LI Yan, ZHOU Yan-Wei, LI Ji-Shun and XUE Yu-Jun, 2007,“New Matrix Algorithm Of Three-Point Method Roundness Error Separation Technique,” Acta Armamentarii, Vol. 28, pp. 73-77 [13] Lei Xianqing, Li Jishun, Li Yan, Zhou Yanwei, Yujun Xue and Ren Xiaozhong, 2006,“Separating And Reconstructing Techniques Of Cylindricity Error By Three-Point Method,” Mechatronics And Automation, Proceedings Of The 2006 IEEE International, pp. 89-94 [14] 劉建宏，2000，數控加工機與銑刀誤差檢測之數模研究，國立成功大學機械工程學系，博士論文 [15] 陳志龍，2002，智慧型高速真圓度測定儀模擬系統及演算法，國立台灣大學電機工程學系，碩士論文 [16] 徐可偉、朱訓生、陳正昕，2000，”幾種常用圓度誤差分離方法的分析及比較”，計量技術，No. 8，26-28 [17] 吳参鏡，1999，工具機主軸旋轉運動的幾何精度分析與測量原理，國立成功大學機械工程學系，博士論文 | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/40445 | - |
| dc.description.abstract | 在工具機上對工件進行真圓度檢測時，感測器所測量到的結果包含主軸旋轉之徑向誤差和被測截面的圓度誤差，利用三點法可以分離這兩個誤差而得到被測工件之真圓度。然而實際使用三點法於真圓度測量中，因安裝上的誤差，使得圓度誤差測量結果失真。因此本文以三點法為基礎，修正三點法之理論，降低感測器未相交於一點時的影響。最後藉由實驗，實際對工件進行測量，驗證修正結果，而實驗結果證明修正後之三點法可以降低安裝時的誤差。 | zh_TW |
| dc.description.abstract | While measuring the roundness of work piece on the machine, the overall result of sensors contain the error of rotation axis and roundness error of work piece. By using the three-point method, one can separate the error of rotation axis from the overall result, and achieve the result of roundness error of work piece. However, the overall results are affected by the errors caused by inaccurate installation of sensors and therefore reduce the measurement accuracy. The object of this thesis is to modify the three-point method such that the errors of measurement caused by sensors installation are minimized. Numerical simulations as well as experiment are performed to validate the methodology. It is shown that the proposed method can minimize the errors of measurement caused by inaccurate installation. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-14T16:47:50Z (GMT). No. of bitstreams: 1 ntu-97-R95522637-1.pdf: 3879272 bytes, checksum: 7b590d9df3999d4c3fc59528be692fea (MD5) Previous issue date: 2008 | en |
| dc.description.tableofcontents | 中文摘要 i
英文摘要 ii 目錄 iii 圖目錄 v 表目錄 vii 第一章 緒論 1 1.1 前言 1 1.2 文獻回顧 2 1.3 研究目的 3 1.4 本文架構 3 第二章 圓度誤差與主軸旋轉誤差 5 2.1 真圓度之定義 5 2.1.1 最小平方圓 5 2.1.2 最小外接圓 11 2.1.3 最大內切圓 11 2.1.4 最小環帶圓 12 2.2 旋轉誤差之來源 12 第三章 主軸旋轉之圓度誤差分離方法 14 3.1 真圓度之量測 14 3.2 圓度誤差分離方法 14 3.2.1 反向法 15 3.2.2 兩步法 16 3.2.3 多步法 18 3.3 三點法之理論與分析 18 3.3.1 三點法 18 3.3.2 四點法 26 3.3.3 兩點法 26 3.4 三點法之修正 26 第四章 模擬與實驗 32 4.1 三點法之模擬 32 4.1.1 無偏心誤差和主軸旋轉之徑向誤差 33 4.1.2 偏心誤差和主軸旋轉之徑向誤差 34 4.2 三點法之實驗驗證 35 4.2.1 實驗設備 36 4.2.2 實驗流程 41 4.2.3 實驗結果 42 第五章 結論 58 5.1 結論 58 5.2 未來研究方向 58 参考文獻 a 附錄一 符號表 d 附錄二 標準圓柱試棒圓柱度 f 附錄三 零件圖 g | |
| dc.language.iso | zh-TW | |
| dc.subject | 圓度誤差 | zh_TW |
| dc.subject | 誤差分離 | zh_TW |
| dc.subject | 三點法 | zh_TW |
| dc.subject | 主軸旋轉誤差 | zh_TW |
| dc.subject | spindle error | en |
| dc.subject | error separation | en |
| dc.subject | three-point method | en |
| dc.subject | roundness | en |
| dc.title | 降低三點法真圓度測量誤差之研究 | zh_TW |
| dc.title | A Study on Minimizing Errors in Three-Point Method for Roundness Measurement | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 96-2 | |
| dc.description.degree | 碩士 | |
| dc.contributor.oralexamcommittee | 陳達仁,林鎮洲,林清源 | |
| dc.subject.keyword | 誤差分離,三點法,主軸旋轉誤差,圓度誤差, | zh_TW |
| dc.subject.keyword | error separation,three-point method,spindle error,roundness, | en |
| dc.relation.page | 61 | |
| dc.rights.note | 有償授權 | |
| dc.date.accepted | 2008-07-31 | |
| dc.contributor.author-college | 工學院 | zh_TW |
| dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
| 顯示於系所單位： | 機械工程學系 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-97-1.pdf 未授權公開取用 | 3.79 MB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。