請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/4011
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 江茂雄(Mao-Hsiung Chiang) | |
dc.contributor.author | Chih-Pei Wen | en |
dc.contributor.author | 温志培 | zh_TW |
dc.date.accessioned | 2021-05-13T08:40:23Z | - |
dc.date.available | 2021-03-08 | |
dc.date.available | 2021-05-13T08:40:23Z | - |
dc.date.copyright | 2016-03-08 | |
dc.date.issued | 2016 | |
dc.date.submitted | 2016-02-01 | |
dc.identifier.citation | [1] D. Stewart, 'A platform with six degrees of freedom,' Proceedings of the institution of mechanical engineers, vol. 180, pp. 371-386, 1965.
[2] R. Clavel, 'Delta, a fast robot with parallel geometry,' in Proceedings of the International Symposium on Industrial Robots, 1988, 1988, pp. 91-100. [3] F. Pierrot, C. Reynaud, and A. Fournier, 'DELTA: a simple and efficient parallel robot,' Robotica, vol. 8, pp. 105-109, 1990. [4] A. Codourey, 'Dynamic modeling of parallel robots for computed-torque control implementation,' The International Journal of Robotics Research, vol. 17, pp. 1325-1336, 1998. [5] L.-W. Tsai, G. C. Walsh, and R. E. Stamper, 'Kinematics of a novel three DOF translational platform,' in Robotics and Automation, 1996. Proceedings., 1996 IEEE International Conference on, 1996, pp. 3446-3451. [6] J. Wang and X.-J. Liu, 'Analysis of a novel cylindrical 3-DoF parallel robot,' Robotics and Autonomous Systems, vol. 42, pp. 31-46, 2003. [7] V. Lukanin, 'Inverse Kinematics, Forward Kinematics and working space determination of 3DOF parallel manipulator with SPR Joint Structure,' Mechanical Engineering, vol. 49, pp. 39-61, 2005. [8] D. Chablat and P. Wenger, 'Architecture optimization of a 3-DOF translational parallel mechanism for machining applications, the orthoglide,' Robotics and Automation, IEEE Transactions on, vol. 19, pp. 403-410, 2003. [9] S. Huda, Y. Takeda, and S. Hanagasaki, 'Kinematic design of 3-URU pure rotational parallel mechanism to perform precise motion within a large workspace,' Meccanica, vol. 46, pp. 89-100, 2011. [10] H.-S. Choi, C.-S. Han, K.-y. Lee, and S.-h. Lee, 'Development of hybrid robot for construction works with pneumatic actuator,' Automation in Construction, vol. 14, pp. 452-459, 2005. [11] M.-H. Chiang and H.-T. Lin, 'Development of a 3D parallel mechanism robot arm with three vertical-axial pneumatic actuators combined with a stereo vision system,' Sensors, vol. 11, pp. 11476-11494, 2011. [12] H.-T. Lin, 'Design, analysis and path tracking servo control of 3-PUU pneumatic parallel manipulators with a stereo vision measurement system,' Ph.D. dissertation, National Taiwan University, Taipei, Taiwan, 2012. [13] M.-H. Chiang, H.-T. Lin, and C.-L. Hou, 'Development of a stereo vision measurement system for a 3D three-axial pneumatic parallel mechanism robot arm,' Sensors, vol. 11, pp. 2257-2281, 2011. [14] D. Ben-Dov and S. E. Salcudean, 'A force-controlled pneumatic actuator,' Robotics and Automation, IEEE Transactions on, vol. 11, pp. 906-911, 1995. [15] E. Richer and Y. Hurmuzlu, 'A high performance pneumatic force actuator system: Part I—Nonlinear mathematical model,' Journal of Dynamic Systems, Measurement, and Control, vol. 122, pp. 416-425, 1999. [16] J. Wang, D. Wang, P. R. Moore, and J. Pu, 'Modelling study, analysis and robust servocontrol of pneumatic cylinder actuator systems,' IEE Proceedings-Control Theory and Applications, vol. 148, pp. 35-42, 2001. [17] J. E. Bobrow and B. W. McDonell, 'Adaptive tracking control of an air powered robot actuator,' Journal of dynamic systems, measurement, and control, vol. 115, pp. 427-433, 1993. [18] J. E. Bobrow and B. W. McDonell, 'Modeling, identification, and control of a pneumatically actuated, force controllable robot,' Robotics and Automation, IEEE Transactions on, vol. 14, pp. 732-742, 1998. [19] A. Moran, S. Nakadai, and M. Nagai, 'Analysis of computer-controlled pneumatic servo system for robotic applications,' in Intelligent Robots and Systems '90. 'Towards a New Frontier of Applications', Proceedings. IROS '90. IEEE International Workshop on, 1990, pp. 897-902 vol.2. [20] S. Liu and J. E. Bobrow, 'An analysis of a pneumatic servo system and its application to a computer-controlled robot,' Journal of Dynamic Systems, Measurement, and Control, vol. 110, pp. 228-235, 1988. [21] T. Noritsugu and M. Takaiwa, 'Robust positioning control of pneumatic servo system with pressure control loop,' in Robotics and Automation, 1995. Proceedings., 1995 IEEE International Conference on, 1995, pp. 2613-2618 vol.3. [22] H. K. Lee, G. S. Choi, and G. H. Choi, 'A study on tracking position control of pneumatic actuators,' Mechatronics, vol. 12, pp. 813-831, 2002. [23] B. W. McDonell and J. E. Bobrow, 'Adaptive tracking control of an air powered robot actuator,' Journal of Dynamic Systems, Measurement, and Control, vol. 115, pp. 427-433, 1993. [24] K. Tanaka, Y. Yamada, T. Satoh, A. Uchibori, and S. Uchikado, 'Model reference adaptive control with multi-rate type neural network for electro-pneumatic servo system,' in Control Applications, 1999. Proceedings of the 1999 IEEE International Conference on, 1999, pp. 1716-1721 vol. 2. [25] K. Tanaka, Y. Yamada, A. Shimizu, and S. Shibata, 'Multi-rate adaptive pole-placement control for pneumatic servo system with additive external forces,' in Advanced Motion Control, 1996. AMC '96-MIE. Proceedings., 1996 4th International Workshop on, 1996, pp. 213-218 vol.1. [26] L. Baoren, L. Zhuangyun, and X. Yaoming, 'Study on adaptive control for a pneumatic position servo system,' Advances in Modelling & Analysis C, vol. 49, pp. 21-28, 1997. [27] J.-J. E. Slotine and W. Li, Applied Nonlinear Control vol. 199: Prentice hall New Jersey, 1991. [28] E. Richer and Y. Hurmuzlu, 'A high performance pneumatic force actuator system: Part II—Nonlinear controller design,' Journal of Dynamic Systems, Measurement, and Control, vol. 122, pp. 426-434, 1999. [29] G. M. Bone and N. Shu, 'Experimental comparison of position tracking control algorithms for pneumatic cylinder actuators,' Mechatronics, IEEE/ASME Transactions on, vol. 12, pp. 557-561, 2007. [30] A.-C. Haung and K.-K. Liao, 'FAT-based adaptive sliding control for flexible arms: Theory and experiments,' Journal of Sound and Vibration, vol. 298, pp. 194-205, 11/22/ 2006. [31] M.-H. Chiang, L.-W. Lee, C.-F. Kuo, and Y.-N. Chen, 'A H∞ tracking-based adaptive sliding-mode controller for nonlinear pneumatic path tracking systems via a functional approximation approach,' Journal of the Chinese Society of Mechanical Engineers, vol. 30, pp. 83-94, 2009. [32] H. Kodama, 'A scheme for three-dimensional display by automatic fabrication of 3hree-dimensional model,' IEICE Transactions on Electronics (Japanese Edition), vol.J64-C, No.4, pp.237-241, 1981. [33] H. Kodama, 'Automatic method for fabricating a three-dimensional plastic model with photo-hardening polymer,' Review of Scientific Instruments, Vol. 52, No. 11, pp. 1770-1773, 1981. [34] C. W. Hull, 'Apparatus for production of three-dimensional objects by stereolithography,' U. S. Patent No. 4575330, March 11, 1986 [35] S. Crump, 'Apparatus and method for creating three-dimensional objects,' U. S. Patent No. 5121329, October 30, 1992 [36] S. Crump, 'Modeling apparatus for three-dimensional objects,' U. S. Patent No. 5340433, August 23, 1994 [37] E. M. Sachs, J. S. Haggerty, M. J. Cima, and P. A. Williams, 'Three-dimensional printing techniques,' U. S. Patent No. 5204055, April 20, 1993 [38] T. Anderson and J. F. Bredt, 'Three dimensional printing materials system and method of use,' Europe Patent No. 0925169, December 19, 2001 [39] R. Jones, P. Haufe, E. Sells, P. Iravani, V. Olliver, C. Palmer, and A. Bowyer, 'Reprap - the replicating rapid prototype,' Robotica, vol. 29, pp. 177–191, 2011. [40] J. M. Pearce, C. M. Blair, K. J. Laciak, R. Andrews, A. Nosrat, and I. Zelenika-Zovko, '3-D printing of open source appropriate technologies for self-directed sustainable development,' Journal of Sustainable Development, vol. 3, pp. 17-29, 2010. [41] S. C. Park and B. K. Choi, 'Tool-path planning for direction parallel area milling,' Compute Aided Design, vol. 32, pp. 17-25, 2000. [42] R. T. Farouki, T. Koenig, K. A. Tarabanis, J. U. Korein, and J. S. Batchelder, 'Path planning with offset curves for layered fabrication processes,' Journal of Manufacturing Systems, vol. 14, pp. 355-368, 1995. [43] H. Wang, P. Janq, and J. A. Stori, 'A metric-based approach to two dimensional tool-path optimization for high-speed machining,' Journal of Manufacturing Science and Engineering, pp. 127-133, 2005. [44] J. Balic and M. Korosec, 'Intelligent tool path generation for milling of free surfaces using neural networks,' International Journal of Machine Tools & Manufacture, vol. 42, no. 10, pp. 1171-1179, 2002. [45] J. Balic, A. Nestler, and G. Schulz, 'Prediction and optimization of cutting conditions using neural networks and genetic algorithm,' Journal of Mechanical Engineering, Assoc. Mech. Eng. Tech. Slovenia, pp. 192-203, 1999. [46] P. K. Wah, K. G. Murty, A. Joneja, and L. C. Chiu, 'Toolpath optimization in layered manufacturing,' IEE Trans., vol.34, pp. 335-347, 2002. [47] L.-W. Tsai and S. Joshi, 'Kinematics and optimization of a spatial 3-UPU parallel manipulator,' Journal of Mechanical Design, vol. 122, p. 439, 2000. [48] M. Bouri and R. Clavel, 'The Linear Delta: Developments and Applications,' in Robotics (ISR), 2010 41st International Symposium on and 2010 6th German Conference on Robotics (ROBOTIK), pp. 1-8, 2010. [49] N. Deo, Graphs theory with applications to engineering and computer science, Prentice-Hall, 1974. [50] G. L. Alexanderson, 'Euler and Königsberg's bridges: a historical view,' Bulletin of the American Mathematical Society, vol. 43, pp. 567-573, 2006. [51] J. Hopcroft and R. Tarjan, 'Efficient planarity testing,' Journal of the Association for Computing Machinery, vol. 21, no. 4, pp. 549-568, 1974. [52] J. Holland, Adaptation in Natural and Artificial Systems, MIT Press, 1975. [53] L.-W. Tsai, Robot analysis: the mechanics of serial and parallel manipulators: Wiley-Interscience, 1999. [54] K. Åström and T. Hägglund, Advanced PID Control. Research Triangle Park, NC: ISA, 2005. [55] M. W. Spong, S. Hutchinson, and M. Vidyasagar, Robot modeling and control: John Wiley & Sons New York, 2006. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/4011 | - |
dc.description.abstract | 本研究旨在發展3D列印的軌跡規劃演算法並應用於三軸氣壓式並聯機構機械臂,置重點於3D列印的軌跡規劃於三軸氣壓式並聯機構機械臂,結合實驗室已發展之三軸氣壓式並聯機構機械臂之運動學分析與控制器設計,以模擬及實際實驗驗證。
在3D列印的軌跡規劃方面,將欲列印的物體,採用圖論(Graph Theory)的向量形式建立。透過深度優先搜尋(Depth-First Search, DFS)定義一個平面的所有分歧路徑,並由基因演算法(Genetic Algorithm, GA)計算如何以最低代價連接所有分歧路徑。最後將每個平面的路徑串接,即可得軌跡規劃。 在三軸氣壓式並聯機構機械臂的運動學分析方面,採用幾何向量的理論與空間中向量迴圈的封閉性質,透過逆向與順向運動學的定義分別推導出致動器與運動平台的關係。 在三軸氣壓式並聯機構機械臂的控制器設計方面,單軸氣壓伺服系統採用雙迴圈回授控制策略,其中包含內圈的壓力控制與外圈的位置控制。根據上述方法,並額外採用逆向動力學控制策略,以實現三軸氣壓式並聯機構機械臂的控制與解決三軸的非線性耦合。 在本論文最後,透過數值模擬,檢測三軸氣壓式並聯機構機械臂之推導模型與3D列印之軌跡規劃的正確性。為證明實用性,藉由實驗室已建立之三軸氣壓式並聯機構機械臂實驗系統的實驗,輸入與數值模擬相同的軌跡,驗證控制器的效能與3D列印整合三軸氣壓式並聯機構機械臂的可行性。 | zh_TW |
dc.description.abstract | This study aims to develop 3D-printing path planning algorithms and applies to a three-axial pneumatic parallel manipulator. The emphasis is on the research of 3D-printing path planning algorithms, integrating the three-axial pneumatic parallel manipulator which has developed on its kinematic analysis and controller design in lab before, and verifying the performance through the whole system simulations and experiments.
In path planning algorithms for 3D printing, the desired-printing object was established from graph theory as vector form. From the view of a layer, all sub-paths are defined through the depth-first search, and the genetic algorithm is used to find the minimum costs linking sub-paths. After cascading all layers, the overall path is accomplished. In analysis of kinematics, the geometric method is introduced to solve the relation of manipulator between actuated joints and moving platform through vector-loop closure equations, including inverse and forward kinematics. In controller design, control strategy of single-axial pneumatic servo system is applied with dual-loop feedback control scheme, i.e. inner pressure control and outer position control. Based on that, controller of three-axial pneumatic parallel manipulator is established with extra inverse dynamics control strategy to decouple the nonlinear terms. Finally, numerical simulations are carried out to verify the correctness of the derived models and the path-planning trajectories. To show the practicality, real-time experiments are implemented in the test rig of three-axial pneumatic parallel mechanism robot with the same trajectories in simulations for testifying the control performance and the possibility of 3D printing integrating with three-axial pneumatic parallel manipulator. | en |
dc.description.provenance | Made available in DSpace on 2021-05-13T08:40:23Z (GMT). No. of bitstreams: 1 ntu-105-R02525034-1.pdf: 12475922 bytes, checksum: bdb52861cbd7f42804f12e26174301ef (MD5) Previous issue date: 2016 | en |
dc.description.tableofcontents | 口試委員會審定書 #
誌謝 i 中文摘要 ii ABSTRACT iii CONTENTS v LIST OF FIGURES viii LIST OF TABLES xix Chapter 1 Introduction 1 1.1 Background 1 1.2 Literature Review 3 1.2.1 Parallel Manipulator 3 1.2.2 Pneumatic Servo System 4 1.2.3 3D Printing Technology 5 1.3 Motivation 6 1.4 Outline of Thesis 7 Chapter 2 System Overview 8 2.1 Mechanism Description 8 2.2 Test Rig Layout 11 2.2.1 Pneumatic Servo Positioning System 11 2.2.2 Overall Manipulator System 12 Chapter 3 Path Planning Algorithms for 3D Printing 15 3.1 Path Planning Model 15 3.2 Single-Layer Path Planning Strategy 20 3.2.1 Path Generation 20 3.2.2 Path Optimization 28 3.3 Layer-to-Layer Path Planning Strategy 33 Chapter 4 Analysis of Kinematics 36 4.1 Geometry of the Manipulator 36 4.2 Analysis of Inverse Kinematics 40 4.3 Analysis of Forward Kinematics 41 Chapter 5 Controller Design 43 5.1 Control Strategy of the Single-Axial Pneumatic Servo System 43 5.2 Control Strategy of the Three-Axial Pneumatic Parallel Manipulator 47 Chapter 6 Simulations and Experiments 50 6.1 Verifications of Kinematic Model 51 6.1.1 Circle-shape Line Trajectory 53 6.1.2 Sphere-shape Line Trajectory 57 6.1.3 Solid Cuboid Trajectory 61 6.1.4 Solid Polyhedron Trajectory 72 6.1.5 Solid Complex 3D Trajectory 83 6.2 Simulations of Three-Axial Pneumatic Parallel Manipulator by ADAMS and SIMULINK 86 6.2.1 Simulation of Circle-shape Line Trajectory 87 6.2.2 Simulation of Sphere-shape Line Trajectory 92 6.2.3 Simulation of Solid Cuboid Trajectory 97 6.2.4 Simulation of Solid Polyhedron Trajectory 102 6.2.5 Simulation of Solid Complex 3D Trajectory 107 6.3 Experiments of Three-Axial Pneumatic Parallel Manipulator by Path Tracking Control of End-Effector 112 6.3.1 Experimental Results of Circle-shape Line Trajectory 113 6.3.2 Experimental Results of Sphere-shape Line Trajectory 118 6.3.3 Experimental Results of Solid Cuboid Trajectory 123 6.3.4 Experimental Results of Solid Polyhedron Trajectory 128 6.3.5 Experimental Results of Solid Complex 3D Trajectory 133 Chapter 7 Conclusions 138 REFERENCES 140 | |
dc.language.iso | en | |
dc.title | 3D列印之路徑規劃演算法於三軸氣壓式並聯機構機械臂之研究 | zh_TW |
dc.title | The Development of Path Planning Algorithm for 3D Printing in a Three-Axial Pneumatic Parallel Manipulator | en |
dc.type | Thesis | |
dc.date.schoolyear | 104-1 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 郭振華,江茂欽,黃金川 | |
dc.subject.keyword | 3D列印,軌跡規劃,深度優先搜尋(DFS),基因演算法(GA),氣壓伺服系統,並聯式機構機械臂,運動學分析,軌跡追蹤控制, | zh_TW |
dc.subject.keyword | 3D printing,path planning,depth-first search (DFS),genetic algorithm (GA),pneumatic servo system,parallel manipulator,kinematic analysis,path tracking control, | en |
dc.relation.page | 143 | |
dc.rights.note | 同意授權(全球公開) | |
dc.date.accepted | 2016-02-01 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 工程科學及海洋工程學研究所 | zh_TW |
顯示於系所單位: | 工程科學及海洋工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-105-1.pdf | 12.18 MB | Adobe PDF | 檢視/開啟 |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。