請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/39482
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 李公哲 | |
dc.contributor.author | Hsuan-Yu Chen | en |
dc.contributor.author | 陳炫妤 | zh_TW |
dc.date.accessioned | 2021-06-13T17:29:37Z | - |
dc.date.available | 2013-07-26 | |
dc.date.copyright | 2011-07-26 | |
dc.date.issued | 2011 | |
dc.date.submitted | 2011-07-12 | |
dc.identifier.citation | 王承遇、陶瑛,「玻璃成份設計與調整」,材料科學與工程出版中心,2006。
王鯤生、林凱隆,「都市垃圾焚化熔渣粉體調製環保水泥之卜作嵐反應特性研究」,國立中央大學環境工程研究所博士論文,2002。 王鯤生、蕭炳欽,「都市垃圾灰渣與下水污泥灰渣共同高溫熔融處理操作溫度特性之研究」,國立中央大學環境工程研究所碩士論文,1993。 光電科技工業協進會,http://www.pida.org.tw/,2010。 吳振名,「玻璃陶瓷-陶瓷技術手冊」,經濟部技術處,1994。 吳泰伯、許家旺,「In-situ電漿表面處理對原子層化學氣相沈積Al2O3、HfO2高介電薄膜應用在奈米尺度世代DRAM影響之研究」,國立清華大學材料科學工程學系碩士論文,2006。 呂健瑋、廖婉君,「廢棄液晶顯示器材料再利用介紹」,工業材料雜誌,No.260,2008。 李公哲、范振軒,「TFT-LCD廢玻璃/氟化鈣污泥熱處理資材化為絕緣玻璃陶瓷之研究」,國立台灣大學環境工程學研究所碩士論文,2010。 李公哲、熊正琇,「工業廢水污泥/淨水污泥共同熔融處理之操作參數及資源化研究」,國立台灣大學環境工程學研究所碩士論文,2003。 李世欽、譚中雄,「以真空燒結與熱壓及熱均壓製備Cr-Si靶材及其特性之研究」,國立成功大學材料科學及工程學系博士論文,2009。 李志浩、吳宇瀚,「添加氧化硼、氧化磷、氟化鎂以及氧化鋅對低膨脹Li2O-Al2O3-SiO2玻璃陶瓷的顯微結構、熱膨脹性與抗折強度之影響」,國立清華大學工程與系統科學系碩士論文,2005。 村上中弘、石田貴、鈴木和美、角田幸二,「下水污泥灰份の熔融特性に關する考察」,下水道協會誌,第26卷,第296號,pp.12-18,1989。 汪建民,「陶瓷技術手冊」,中華民國粉末冶金學會,1994。 拓墣產業研究所,「面板產業撥雲見日,2010年需求成長湧商機」,光連雙月刊,No.85,2010。 林則孟,「TFT-LCD業階層式先進規劃與排程」,國立清華大學工業工程與工程管理研究所,2006。 林穎毅、邱琬珺,「台灣顯示器產業大未來」,光連雙月刊,No.85,2010。 林原德,「TFT-LCD產業的介紹」,台灣康寧顯示玻璃股份有限公司,2004。 邱六合、朱厚任,「銅粉燒結毛細結構之沖蝕研究」,大同大學材料工程研究所碩士論文,2008。 侯朝霞、蘇春輝,「透明玻璃陶瓷材料組成、結構及光學性能」,東北大學出版社,2008。 徐自佑、吳佩玲,「LCD產業簡介」,產業評析,2008。 徐錦志、麥宏全,「中紅外光穿透性鈣鋁酸鹽玻璃陶瓷」,大同大學材料工程學系碩士論文,2004。 高瑛紜、劉蘭萍、王義基,「液晶面板製造業廢棄物資源化現況評析」,綠基會通訊,2008。 郭東昊、曾偉毅,「Mn摻雜量對(K,Bi)1(Bi,Nd)4Ti4O15鐵電薄膜特性之研究」,國立東華大學材料科學與工程學系碩士論文,2008。 黃坤祥,「粉末冶金學」,中華民國粉末冶金學會,2003。 黃啟原、曾敏惠,「1-x(Bi0.5Na0.5)TiO3–xBa(Zn1/3Nb2/3)O3系統之合成、晶體結構、及介電性質」,國立成功大學資源工程研究所碩士論文,2009。 Al-Rawas, A.A., Hago, A.W., Taha, R., Al-Kharousi, K., “Use of incinerator ash as a replacement for cement and sand in cement mortars”, Building and Environment, Vol.40, pp.1261-1266, 2005. ASTM D1857-04, “Standard Test Method for Fusibility of Coal and Coke Ash”. Barbieri, L., Corradi, A., Lancellotti, I., Manfredini, T., “Use of municipal incinerator bottom ash as sintering promoter in industrial ceramics”, Waste Management, Vol.22, pp.859-863, 2002. Beall, G.H., Pinckney, L.R., “Nanophase glass-ceramics”, Journal of the American Chemical Society, Vol.82, pp.5-16, 1999. Bertolini, L., Carsana, M., Cassago, D., Curzio, A.Q., Collepardi, M., “MSWI ashes as mineral additions in concrete”, Cement and Concrete Research, Vol.34, pp.1899-1906, 2004. Coble, R.L., “Sintering crystalline solids. I. intermediate and final state diffusion models”, Journal of Applied Physics, Vol.32, pp.787-792, 1961. Coble, R.L., “Sintering crystalline solids. II. experimental test of diffusion models in powder compacts”, Journal of Applied Physics, Vol.32, pp.793-799, 1961. Debenedetti, P.G., Stillinger, F.H., “Supercooled liquids and the glass transition”, NATURE, Vol.410, pp.259-267, 2001. Dietzel, A., “Relation between surface tension and structure of glass fusions”, Kolloid-zeitschrift, Vol.100, pp.368-380, 1942. Dittmer, M., Muller, M., Russel, C., “Self-organized nanocrystallinity in MgO-Al2O3-SiO2 glasses with ZrO2 as nucleating agent”, Materials Chemistry and Physics, Vol.124, pp.1083-1088, 2010. Erol, M., Demirler, U., Kucukbayrak, S., Ersoy-Mericboyu, A., Ovecoglu, M.L., “Characterization investigations of glass-ceramics developed from Seyitomer thermal power plant fly ash”, Journal of the European Ceramic Society, Vol.23, pp.757-763, 2003. German, R.M., “The contiguity of liquid-phase sintered microstructures”, Metallurgical Transactions A-Physical Metallurgy and Materials Science, Vol.16, pp.1247-1252, 1985. Hollander, H.I., Plumley, A.L., DeCesare, R.S., “ASME/US Bureau of Mines investigative program on vitrification of combustion ash/residue: findings and conclusions”, Journal of Hazardous Materials, Vol.47, pp.369-381, 1996. Kim, J., Hwang, S., Sung, W., Kim, H., “Thermal and dielectric properties of glass-ceramics sintered based on diopside and anorthite composition”, Journal of Electroceram, Vol.23, pp.209-213, 2009. Kingery, W.D., “Densification during sintering in the presence of a liquid phase. I. theory”, Journal of Applied Physics, Vol.30, pp.301-306, 1959. Kingery, W.D., Narasimhan M.D., “Densification during sintering in the presence of a liquid phase. II. experimental”, Journal of Applied Physics, Vol.30, pp.307-310, 1959. Lu, Y.C., Hwang, K.S., “Improved densification of carbonyl iron compacts by the addition of fine alumina powders”, Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, Vol.31, pp.1645-1652, 2000. Marotta, A., Buri, A., Branda, F., “Nucleation in glass and differential thermal-analysis”, Journal of Materials Science, Vol.16, pp.341-344, 1981. Mineralogy Database, http://www.webmineral.com/ Mizutani, N., Ogihara, T., Kondo, M., Ikeda, M., Shinozaki, K., “Slip casting and sintering of monodispersed TiO2, particles”, Journal of Materials Science Vol.29, pp.366-372, 1994. Nishida, K., Nagayoshi, Y., Ota, H., Nagasawa, H., “Melting and stone production using MSW incinerated ash”, Waste Management, Vol.21, pp.443-449, 2001. Nishigaki, M, “Producing permeable blocks and pavement bricks from molten slag”, Waste Management, Vol.20, pp.185-192, 2000. Nordahl, C.S., Messing, G.L., “Transformation and densification of nanocrystalline theta-alumina during sinter forging”, Journal of the American Ceramic Society, Vol.79, pp.3149-3154, 1996. Sasikala, T.S., Suma, M.N., Mohanan, P., Pavithran, C., Sebastian, M.T., “Forsterite-based ceramic-glass composites for substrate applications in microwave and millimeter wave communications”, Journal of Alloys and Compounds, Vol.461, pp.555-559, 2008. Scarinci, G., Brusatin, G., Barbieri, L., Corradi, A., Lancellotti, I., Colombo, P., Hreglich, S., Dall'Igna, R., “vitrification of industrial and natural wastes with production of glass fibres”, Journal of the European Ceramic Society, Vol.20, pp.2485-2490, 2000. Shyu, J.J., Mai, H.C., “ZrO2-nucleated calcium aluminate glass-ceramics with mid-infrared transparency”, Journal of Materials Research, Vol.21, pp.465-472, 2006. Siegwarth, J.D., “Polarization and dielectric constant of SrTiO3 glass ceramics at low temperatures”, Journal of Applied Physics, Vol.48, pp.1-4, 1977. Skrifvars, B.J., Hupa, M., Backman, R., Hiltunen, M., “Sintering mechanisms of FBC ashes”, Fuel, Vol.73, pp.171-176, 1994. Sooksaen, P., Reaney, I.M., Sinclair, D.C., “Crystallization and dielectric properties of borate-based ferroelectric PbTiO3 glass-ceramics”, Journal of Electroceram, Vol.19, pp.221-228, 2007. Wang, Y.L., Shen, J.Y., Chen, X.X., Miao, Z.X., “Relation of thermal expansion property and crystal phase in glass-ceramics for low dielectric loss microwave medium materials”, Journal of Inorganic Materials, Vol.14, pp.543-547, 1999. Watari, K., Hwang, H.J., Toriyama, M., Kanzaki, S., “Low-temperature sintering and high thermal conductivity of YLiO2-doped AIN ceramics”, Journal of the American Ceramic Society, Vol.79, pp.1979-1981, 1996. Yeon, D.H., Jo, Y.H., Saji, V.S., Kang, D.H., Cho, Y.S., “Crystallization behavior and microwave dielectric characteristics of ZnO-(La, Nd)2O3-B2O3-based dielectrics”, Journal of Electroceram, Vol.23, pp.127-132, 2009. Zachariasen, W.H., “The atomic arrangement in glass”, Journal of the American Chemical Society, Vol.54, pp.3841-3851, 1932. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/39482 | - |
dc.description.abstract | 本研究旨在以影像顯示產業之廢棄物TFT-LCD (Thin Film Transistor Liquid Crystal Display) 廢玻璃添加MgO、Al2O3及ZrSiO4等調質劑後,經過熱處理程序以製成具有優良機械性質、介電性質及高附加價值之絕緣玻璃陶瓷材料。
本研究分為三階段進行,第一階段為高溫試驗錐實驗,將TFT-LCD廢玻璃添加調質劑後進行試驗錐實驗,以獲得各實驗配比之成分比例對熔流溫度之影響;第二階段為進行熱差分析判斷玻璃轉移溫度及結晶溫度,以決定熱處理條件,將實驗配比於不同熱處理溫度下使其結晶,再以X-ray粉末繞射分析觀察晶相種類;第三階段為選擇符合MAS系玻璃陶瓷之配比進行介電性質分析、抗壓強度分析及抗折強度分析,探討上述TFT-LCD廢玻璃產生之MAS系玻璃陶瓷再利用之可行性。 實驗結果顯示添加MgO之實驗配比,其試驗錐特徵溫度有下降之情形,因此MgO於玻璃陶瓷系統中有助融之效果;由晶相分析結果發現TFT-LCD廢玻璃添加20 wt.% MgO及15~20 wt.% Al2O3可於熱處理溫度1000℃產生堇青石 (Cordierite) 晶相,而添加ZrSiO4於實驗配比中有助於堇青石晶相於較低熱處理溫度產生,顯示ZrSiO4對堇青石之析出及節能可扮演關鍵作用。 本研究TFT-LCD廢玻璃添加20 wt.% MgO、15 wt.% Al2O3及15 wt.% ZrSiO4之配比於熱處理溫度920℃之密度為2.78 g/cm3、抗折強度為172.82 MPa、抗壓強度為402.34 MPa、介電常數為10.290及介電損失因子為0.0172,具有良好之機械性質及介電性質,且皆符合絕緣玻璃陶瓷之特性標準,因此本研究由TFT-LCD廢玻璃添加調質劑產出之玻璃陶瓷具有資材化作為絕緣陶瓷之潛力。 | zh_TW |
dc.description.abstract | This study aimed to use TFT-LCD (Thin Film Transistor Liquid Crystal Display) waste glass from optoelectronics industrial wastes with MgO, Al2O3, and ZrSiO4 additives to produce excellent mechanical and dielectric properties through thermal treatment.
There were three experimental stages in this study. The first stage was cone test of TFT-LCD waste glass with additives, in order to obtain the blending ratio of the components for the melting temperature. The second stage was to determine the thermal treatment conditions based on glass transition temperature and crystallization temperature of the differential thermal analysis at various blending ratio and temperatures to crystallization, and then to observe crystal phase by X-ray powder diffraction analysis. The third stage was for selected ratio of MAS (MgO-Al2O3-SiO2) glass-ceramic system in order to assess the potential of insulting glass-ceramic produced from TFT-LCD waste glass with additives as raw materials to analyze the dielectric properties, compressive strength and flexural strength. The experimental results showed that the temperature of cone test of TFT-LCD waste glass with MgO additive has been decreased, and the MgO in the glass-ceramic system has positive effect on melting. Crystal phase analysis showed that the TFT-LCD waste glass added 20 wt.% MgO and 15~20 wt.% Al2O3 via 1000℃ of thermal treatment could produce Cordierite phase, and the additive of ZrSiO4 in the TFT-LCD waste glass could help crystal phases to be generated at lower thermal treatment temperature. It demonstrated that the additive of ZrSiO4 plays a key role to energy saving and crystallization of cordierite. The TFT-LCD waste glass added 20 wt.% MgO, 15 wt.% Al2O3 and 15 wt.% ZrSiO4 at heat temperature 920℃ showed the density of 2.78 g/cm3, the flexural strength of 172.820 MPa, compressive strength of 402.34 MPa, dielectric constant of 10.290 and the dielectric loss factor of 0.0172. It has good mechanical and dielectric properties, and in accordance with the required standard of insulated glass ceramics. | en |
dc.description.provenance | Made available in DSpace on 2021-06-13T17:29:37Z (GMT). No. of bitstreams: 1 ntu-100-R98541111-1.pdf: 4101812 bytes, checksum: ea3e939c85c0e245518083f0311e8a21 (MD5) Previous issue date: 2011 | en |
dc.description.tableofcontents | 口試委員會審定書 I
謝誌 II 摘要 III Abstract IV 目錄 VI 圖目錄 VIII 表目錄 XI 第一章、前言 1 1.1 研究緣起 1 1.2 研究目的 2 第二章、文獻回顧 3 2.1 電子產業廢棄物之現況 3 2.1.1 TFT-LCD產業之現況 3 2.1.2 TFT-LCD原理及製程 7 2.1.3 TFT-LCD廢玻璃 11 2.2 熔融處理技術 15 2.2.1 熔融原理 15 2.2.2 熔融之操作因子 18 2.2.3 熔渣之冷卻方式 20 2.2.4 熔融資材化應用 22 2.3 燒結熱處理技術 24 2.3.1 燒結原理 24 2.3.2 燒結機制 26 2.3.3 固相燒結與液相燒結 29 2.3.4 燒結之操作因子 32 2.4 玻璃陶瓷之特性 34 2.4.1 玻璃與玻璃陶瓷 34 2.4.2 玻璃之成份 37 2.4.3 玻璃陶瓷結晶及成長機制 40 2.4.4 玻璃陶瓷之分類 43 2.4.5 玻璃陶瓷之應用 46 2.5 介電性質 48 2.5.1 介電常數 (Dielectric Constant) 48 2.5.2 介電損失 (Dielectric Loss) 52 2.5.3 介電強度 (Dielectric Strength) 56 第三章、實驗材料與方法 57 3.1 實驗材料與設備 57 3.1.1 實驗材料 57 3.1.2 實驗設備 59 3.1.3 分析儀器 61 3.2 實驗方法 63 3.3 實驗架構 70 第四章、結果與討論 74 4.1 基本性質分析 74 4.1.1 三成份分析 74 4.1.2 成份分析 75 4.1.3 晶相分析 77 4.2 高溫試驗錐之實驗分析 79 4.2.1 熔融前之試驗錐實驗結果探討 80 4.2.2 熔融後之試驗錐實驗結果探討 83 4.3 熱差分析實驗 (Differential Thermal Analysis, DTA) 之探討 87 4.3.1 未添加ZrSiO4實驗配比之DTA分析 87 4.3.2 添加ZrSiO4實驗配比之DTA分析 90 4.4 晶相與XRD分析 (X-ray Diffraction Analysis, XRD) 結果之剖析 92 4.4.1 未添加ZrSiO4對晶相形成之影響 94 4.4.2 添加ZrSiO4對晶相形成之影響 105 4.5 機械性質分析 112 4.5.1 密度及吸水率與配比成份之關聯性 113 4.5.2 調質劑對抗折強度之影響探討 123 4.5.3 調質劑對抗壓強度之影響探討 126 4.6 介電性質探討 129 4.6.1 配比成分對介電常數之影響 129 4.6.2 配比成分對逸散因子與品質因子之影響 133 4.6.3 配比成分對介電損失因子之影響 137 第五章、結論與建議 140 5.1 結論 140 5.2 建議 142 第六章、參考文獻 143 | |
dc.language.iso | zh-TW | |
dc.title | TFT-LCD廢玻璃添加調質劑形成MAS系玻璃陶瓷之研究 | zh_TW |
dc.title | Materialization Study on Transformation of MgO-Al2O3-SiO2 Glass Ceramic from TFT-LCD Waste Glass with Additives | en |
dc.type | Thesis | |
dc.date.schoolyear | 99-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 王鯤生,侯嘉洪 | |
dc.subject.keyword | TFT-LCD廢玻璃,玻璃陶瓷,MAS,機械性質,介電性質, | zh_TW |
dc.subject.keyword | TFT-LCD Waste Glass,Glass-Ceramic,MAS System,Mechanical Properties,Dielectric Properties, | en |
dc.relation.page | 147 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2011-07-13 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 環境工程學研究所 | zh_TW |
顯示於系所單位: | 環境工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-100-1.pdf 目前未授權公開取用 | 4.01 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。