請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/38827
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 藍萬烘(Wan-Hong Lan) | |
dc.contributor.author | Po-Yen Lin | en |
dc.contributor.author | 林伯彥 | zh_TW |
dc.date.accessioned | 2021-06-13T16:48:03Z | - |
dc.date.available | 2005-08-02 | |
dc.date.copyright | 2005-08-02 | |
dc.date.issued | 2005 | |
dc.date.submitted | 2005-06-28 | |
dc.identifier.citation | 1. Apel C, Schafer C, Gutknecht N. Demineralization of Er:YAG and Er,Cr:YSGG Laser-Prepared Enamel Cavities in vitro. Caries Res, 37: 34-37, 2003.
2. Aoki A, Ishikawa I, Yamada T, Otuski M, Watanabe H, Tagami J, Ando Y, Yamamoto H. Comparison between Er:YAG laser and conventional technique for root caries treatment in vitro. J Dent Res, 77: 1404-1414, 1998. 3. van As G. Erbium lasers in dentistry. Dent Clin N Am, 48: 1017-1059, 2004. 4. Bertrand MF, Hessleyer D, Muller-Bolla M, Nammour S, Rocca JP. Scanning electron microscopic evaluation of resin-dentin interface after Er:YAG laser preparation. Lasers Surg Med, 35: 51-57, 2004. 5. Bornstein ES, Lomke MA. The safety and effectiveness of dental Er:YAG lasers: a literature review with specific reference to bone. Dentistry Today, 129-133, 2003. 6. Burnett LH, Shinkai R, Eduardo CDP. Tensile bond strength of a one-bottle adhesive system to indirect composites treated with Er:YAG laser, air abrasion, or fluoridric acid. Photomed Laser Surg, 22: 351-356, 2004. 7. Ceballos L, Toledano M, Osorio R, Tay FR, Marshall GW. Bonding to Er-YAG-laser-treated dentin. J Dent Res, 81: 119-22, 2002. 8. Clark J, Symons AL, Diklic S, Walsh LJ. Effectiveness of diagnosing residual caries with various methods during cavity preparation using conventional methods, chemo-mechanical caries removal, and Er:YAG laser. Aust Dent J, 35: S20, 2001. 9. Eguro T, Maeda T, Otsuki M, Nishimura Y, Katsuumi I, Tanaka H. Adhesion of Er:YAG laser-irradiated dentin and composite resins: Application of various treatment on irradiated surface. Lasers Surg Med, 30: 267-272, 2002. 10. Eversole LR, Rizoiu IM. Preliminary investigations on the utility of an erbium, chromium: YSGG laser. J Calif Dant Assoc, 23: 41-47, 1995. 11. Eversole LR, Rizoiu IM, Kimmel AI. Pulpal response to cavity preparation by an ernium, chromium:YSGG laser-powered hydrokinetic system. JADA, 128: 1099-1106, 1997. 12. Frentzen M, Koort HJ. The effect of Er:YAG laser radiation on enamel and dentin. J Dent Res, 71, 571, 1992. 13. Fried D, Ashouri N, Breunig T, Shori R. Mechanism of water augmentation during IR laser ablation of dental enamel. Lasers Surg Med, 31: 186-193, 2002. 14. Fusayama T, Nakamura M, Kurosaki N, Iwaku M. Nonpressure adhesion of a new adhesive restorative system. J Dent Res, 58: 1364-1370, 1979. 15. Gaston BA, West LA, Liewehr FR, Fernandes C, Pashley DH. Evaluation of regional bond strength of resin cement to endodontic surfaces. J Endod, 27: 321-324, 2001. 16. Gimbel CB. Hard tissue laser procedures. Dent Clin N Am, 44: 931-948, 2000. 17. Goldman L, Gray JA, Goldman J, Goldman B, Meyer R. Effects of laser impacts on teeth. J Am Dent Ass, 70: 601-606, 1965. 18. Gutknecht N, Apel C. Microleakage of Composite Filling in Er,Cr:YSGG Laser-Prepared Class II Cavities. Lasers Surg Med, 28: 371-374, 2001. 19. Hadley J, Young DA, Eversole LR, Gornbein JA. A laser-powered hydrokinetic system for caries removal and cavity preparation. J Am Dent Assoc, 131: 777-785, 2000. 20. Harashima T, Kinoshita J, Kimura Y, Brugnera A, Zanin F, Pecora JD, Matsumoto K. Morphological comparative study on ablation of dental hard tissues at cavity preparation by Er:YAG and Er,Cr:YSGG lasers. Photomed Laser Surg, 23: 52-55, 2005. 21. Hibst R. Lasers for caries removal and cavity preparation: state of the art and future directions. J Oral Laser Applic, 2: 203-212, 2002. 22. Hibst R, Keller U. Experimental studies of the application of the Er:YAG laser on dental hard substances. I. Measurement of the ablation rate. Lasers Surg Med, 9: 338-344, 1989. 23. Hossain M, Nakamura Y, Tamaki Y, Yamada Y, Murakami Y, Matsumoto K. Atomic analysis and knoop hardness measurement of the cavity floor prepared by Er,Cr:YSGG laser irradiation in vitro. J Oral Rehab, 30: 515-521, 2003. 24. Ishizaki NT, Matsumoto K, Kimura Y, Wang X, Kinoshita J, Okano SM, Jayawardena JA. Thermographical and morphological studies of Er,Cr:YSGG laser irradiation on root canal walls. Photomed Laser Surg, 22: 291-297, 2004. 25. Jassem HA, Retief DH, Jamison HC. Tensile and shear strengths of bonded and rebonded orthodontic attachments. Am J Orthod, 79: 661-8, 1981. 26. Kameyama A, Kawada E, Amagai T, Takizawa M, Oda Y, Hirai Y. Effect of HEMA on bonding of Er:YAG laser-irradiated bovine dentine and 4-META/MMA-TBB resin. J Oral Rehabilitation, 29: 749-755, 2002. 27. Kameyama A, Nawada E, Takizawa M, Oda Y, Hirai Y. Influence of different acid conditioners on the tensile bond strength of 4-META/MMA-TBB resin to Er:YAG laser irradiated bovine dentin. J Adhesive Dent, 2: 97-304, 2000. 28. Kantola S. Laser-induced effects on tooth structure: V. Electron probe microanalysis and polarized light microscopy of dental enamel. Acta Odontol Scand, 30: 475-484, 1972. 29. Kataumi M, Nakamura Y, Yamada T, Tagami J. Tensile bond strength and SEM evaluation of Er:YAG laser irradiated dentin using dentin adhesive. Dent Mat J, 17: 125-138, 1998. 30. Keller U, Hibst R. Experimental studies of the application of the Er:YAG laser on dental hard substances: II. Light microscopic and SEM investigations. Lasers Surg Med, 9: 345-351, 1989. 31. Khan MF, Yonaga K, Kimura Y, Funato A, Matsumoto K. Study of microleakage at class I cavities prepared by the Er:YAG laser using three types of restorative materials. J Clin Laser Med Surg, 16: 305-308, 1998. 32. Kinney JH, Haupt DL, Balooch M, White JM, Bell WL, Marshall SJ, Marshall GW. The threshold effects of Nd and Ho:YAG laser-induced surface modification on demineralization of dentin surfaces. J Dent Res, 75: 1388-1395, 1996. 33. Kimura Y, Yu DG, Kinoshita J, Hossain M, Yokoyama K, Murakami Y, Nomura K, Takamura R, Matsumoto. Effects of erbium, chromium:YSGG laser irradiation on root surface: morphological and atomic analytical studies. J Clin Laser Med Surg, 19: 69-72, 2001. 34. Kinoshita JI, Kimura Y, Matsumoto K. Comparative Study of Carious Dentin Removal by Er,Cr:YSGG Laser and Carisolv. J Clin Laser Med Surg, 21: 307-315, 2003. 35. Kiremitci A, Yalcin F, Gokalp S. Bonding to enamel and dentin using self-etching adhesive systems. Quintessence Int, 35: 367-370, 2004. 36. Lee BS, Hsieh TT, Lee YL, Lan WH, Hsu YJ, Wen PH, Lin CP. Bond Strength of Orthodontic Bracket After Acid-Etched, Er:YAG Laser-Irradiated and Combined Treatment on Enamel Surface. Angle Orthodontist, 73: 565-570, 2003. 37. Lee BS, Lin CP, Hung YL, Lan WH. Structural changes of Er:YAG laser-irradiated human dentin. Photomed Laser Surg, 22: 330-334, 2004. 38. Lee BS, Lin CP, Lin FH, Lan WH. Ultrastructural changes of human dentin after irradiation by Nd:YAG laser. Lasers Surg Med, 30: 246-252, 2002. 39. Leinfelder KF. Dentin adhesives for the twenty-first century. DCNA, 45: 1-6, 2001. 40. Lin S, Caputo AA, Eversole LR, Rizoiu I. Topographical characteeeristics and shear bond strength of tooth surfaces cut with a laser-powered hydrokinetic system. J Prosth Dent, 82: 451-455, 1999. 41. Lobene R, Fine S. Interaction of laser radiation with oral hard tissues. J Pros Dent, 16: 589–597, 1966. 42. Lussi A, Megert B, Longbottom C, Reich E, Francescut P. Clinical performance of a laser fluorescence device for detection of occlusal caries lesions. Eur J Oral Sci, 109: 14-19, 2001. 43. Marshall GW, Balooch M, Kinney JH, Marshall SJ. Atomic force microscopy of conditioning agents on dentin. J Biomed Mater Res, 29: 1381-1387, 1995. 44. Martinez-Insua A, Dominguez LS, Rivera FG, Santana-Penin UA. Differences in bonding to acid-etched or Er:YAG-laser-treated enamel and dentin surface. J Prosth Dent, 84: 280-288, 2000. 45. Matsumoto K, Hossain M, Hossain MM, Kawano H, Kimura Y. Clinical assessment of Er,Cr:YSGG laser application for caries removal and cavity preparation in children. Med Laser Appl, 20: 17-21, 2002. 46. Matsumoto K, Hossain M, Hossain MM, Kawano H, Kimura Y. Clinical assessment of Er,Cr:YSGG laser application for cavity preparation. J Clin Laser Med Surg, 20: 17-21, 2002. 47. McComb D and Smith DC. A preliminary scanning electron microscopic study of root canals after endodontic procedures. J Endod, 1: 238-242, 1975. 48. Monghini EM, Wanderley RL, Pecora JD, Palma Dibb RG, Corona S, Borsatto MC. Bond strength to dentin of primary teeth irradiated with varying Er:YAG laser energies and SEM examination of the surface morphology. Laser Surg Med, 34: 254-259, 2004. 49. Moritz A, Gutknecht N, Schoop U, Goharkhay K, Wernisch J, Sperr W. Alternative in Enamel Conditioning: A Comparison of Conventional and Innovative Methods. J Clin Laser Med Surg, 14: 133-136, 1996. 50. Nakabayashi N, Kojima K, Masuhara E. The promotion of adhesion by the infiltration of monomers into tooth substrates. J Biomed Mater Res, 16: 265-273, 1982. 51. Nakabayashi N, Pashley DH. Hybridization of dental hard tissues. Quintessence Publishing Co., Ltd, 1998 52. Nakabayashi N, Saimi Y. Bonding to intact dentin. J Dent Res, 75: 1706-1715, 1996. 53. Nakabayashi N, Watanabe A, Arao T. A tensile test to facilitate identification of defects in resin-bonded dentin specimens. J Dent, 26: 379-385, 1998. 54. Paghdiwala A. Application of the erbium:YAG laser on hard dental tissues: measurement of the temperature changes and depths of cut. Lasers in Medicine, Surgery, and Dentistry Proc ICALEO, 64: 192-201, 1988. 55. Phrukkanon S, Burrow MF, Tyas MJ. Effect of cross-sectional surface area on bond strengths between resin and dentin. Dent Mater 14: 120-128, 1998. 56. Ramos RP, Chimello DT, Chinelatti MA, Nonaka T, Pecora JD, Palma Dibb RG. Effect of Er:YAG Laser on Bond Strength to Dentin of a Self-Etching Primer and Two Single-Bottle Adhesive Systems. Lasers Surg Med, 31: 164-170, 2002. 57. Rizoiu I, Kohanghadosh F, Kimmel AI, Eversole LR. Pulp thermal responses to an erbium, chromium:YSGG pulsed laser hydrokinetic system. Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 86: 220-223, 1998. 58. de Souza AE, Corona SA, Dibb RG, Borsatto MC, Pecora JD. Influence of Er:YAG laser on tensile bond strength of a self-etching system and a flowable resin in different dentin depths. J Dent, 32: 269-75. 2004. 59. Schein MT, Bocangel JS, Nogueira GE, Schein PA. SEM evaluation of the interaction pattern between dentin and resin after cavity preparation using Er:YAG laser. J Dent, 31: 127-135, 2003. 60. Sheth KK, Staninec M, Sarma AV, Fried D. Selective targeting of protein, water, and mineral in dentin using UV and IR pulse lasers: The effect on the bond strength to composite restorative materials. Lasers Surg Med, 35: 245-253, 2004. 61. Stern, RH, Sognnaes, RF. Laser beam effect on dental hard tissues. J Dent Res, 43: 873, 1964. 62. Swift EJ, Perdigão J, Heymann HO. Bonding to enamel and dentin: a brief history and state of the art. Quintessence Int, 26: 95-110, 1995. 63. Tagami J, Tao L, Pashley DH. Correlation among dentin depth permeability and bond strength of adhesive agents. Dent Mater, 6: 45-50, 1990. 64. Tanumiharja M, Burrow MF, Tyas MJ. Microtensile bond strengths of seven dentin adhesive systems. Dent Mater, 16: 180-187, 2000. 65. Trajtenberg CP, Pereira PNR, Powers JM. Resin bond strength and micromorphology of human teeth prepared with an Erbium:YAG laser. Am J Dent, 17: 331-336, 2004. 66. Usumez A, Aykent F. Bond strength of porcelain laminate veneers to tooth surfaces prepared with acid and Er,Cr:YSGG laser etching. J Prostho Dent, 90: 24-30, 2003. 67. Usumez S, Orhan M, Usumez A. Laser etching of enamel for direct bonding with an Er,Cr:YSGG hydrokinetic laser system. Am J Orthod Dentofacial Orthop, 122: 649-656, 2002. 68. Van Meerbeek B, Conn LJ, Duke ES, Eick JD, Robinson SJ, Guerrero D. Correlative transmission electron microscopy examination of nondemineralized and mineralized resin-dentin interfaces formed by two dentin adhesive systems. J Dent Res, 75: 879-888, 1996. 69. Visuri SR, Gilbert JL, Wright DD, Wigdor HA, Walsh JT Jr. Shear Strength of Composite Bonded to Er:YAG Laser-prepared Dentin. J Dent Res, 75: 599-605, 1996. 70. Visuri SR, Walsh JT, Wigdor HA. Erbium laser ablation of dental hard tissue: effect of water cooling. Laser Surg Med, 18: 294-300, 1996. 71. Walsh LJ. The curent status of laser application in dentistry. Austral Dent J, 48: 159, 2003. 72. Wang X, Ishizaki NT, Suzuki N, Kimura Y, Matsumoto K. Morphological changes of bovine mandibular bone irradiated by Er,Cr:YSGG laser: an in vitro study. J Clin Laser Med Surg. 20: 245-50, 2002. 73. Wigdor H, Abt E, Ashrafi S, et al. The effect of lasers on dental hard tissues. J Am Dent Assoc, 124: 65-70, 1993. 74. Yamazaki R, Goya C, Yu DG, Kimura Y, Matsumoto K. Effects of Erbium, Chromium:YSGG Laser Irradiation on Root Canal Walls: A Scanning Electron Microscopic and Thermographic Study. J Endod, 27: 9-12, 2001. 75. Yu DG, Kimura Y. Morphological and atomic analytical studies on enamel and dentin irradiated by an erbium,chromium:YSGG laser. J Clin Laser Med Surg, 18: 139-143, 2000. 76. Yu J, Jia X, Qiao L. A scanning electron microscopy study on morphological changes of Er,Cr:YSGG laser-cut dental hard tissue. Hua Xi Kou Qiang Yi Xue Za Zhi. 21: 356-358, 2003. 77. Zach L, Cohen G. Pulp response to externally applied heat. Oral Surg Oral Med Oral Path, 19: 515-530, 1965. 78. 溫秉翰,「Er,Cr:YSGG雷射與Nd:YAP雷射照射根管壁牙本質的研究」,國立台灣大學醫學院臨床牙醫學研究所牙髓病學組碩士論文,2003年。 79. 許耀仁,「不同參數對Er,Cr:YSGG雷射切削人類牙本質效率之評估比較」,國立台灣大學醫學院臨床牙醫學研究所牙髓病學組碩士論文,2003年。 | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/38827 | - |
dc.description.abstract | 在牙科復形領域中,由於傳統高速磨牙基的使用會使病患感受到震動、擾人的噪音、以及酸痛等等的不適,因此眾多學者皆致力於尋找出更新、更有效率的方法,期能改善這些情形。雷射應用在牙科的發展已經邁入第四十個年頭,近幾年,科學家們發現Er:YAG以及Er,Cr:YSGG這兩種雷射由於其能量很容易被水及氫氧磷灰石(hydroxyapatite)吸收,因此非常適合應用在牙齒的硬組織如窩洞的製備上。而根據研究發現,Er,Cr:YSGG雷射製備過後的牙本質表面沒有碎屑以及塗抹層的堆積,牙本質小管的開口也很清晰地顯露出來,因此可以推測為相當適合複合樹脂填補的介面,然而,關於Er,Cr:YSGG雷射製備過後之牙本質窩洞與複合樹脂之間的鍵結關係,其相關的文獻卻不多,因此,本實驗即以高速磨牙鑽針修形牙本質窩洞作為對照組,利用立體光學顯微鏡與掃瞄式電子顯微鏡做形態之觀察與分析,並進行拉力測試,以研究探討使用Er,Cr:YSGG雷射製備牙本質窩洞,對於牙本質與複合樹脂間黏著關係的影響。
本實驗可分為三部分,第一部份以功率3.5 W、噴水量80%、噴氣量80%的Er,Cr:YSGG雷射以及高速磨牙鑽的cylinder bur #411分別在3 mm厚的牙本質切片上製備牙本質窩洞,之後並分為酸蝕前與酸蝕後兩組進行立體顯微鏡以及掃瞄式電子顯微鏡的觀察。第二部份的實驗,將各組試片窩洞內側塗上黏著劑One Coat Bond (Coltene),並用複合樹脂(Palfique Estelite Paste)加以填補。固化後將牙齒劈開,將這些試片用HCl以及NaOCl去礦化以及去蛋白質化,以立體顯微鏡以及掃瞄式電子顯微鏡觀察其介面的情形。最後一部份的實驗,利用拉力測試機(INSTRON)測試各組牙本質窩洞與複合樹脂間的tensile bond strength,使用 Kruskal-Wallis及Mann-Whitney兩種統計方法進行分析,之後並以立體顯微鏡以及掃瞄式電子顯微鏡觀察分析斷裂面的形態。 於表面觀察的實驗中,可以見到在Er,Cr:YSGG雷射製備過後的牙本質窩洞,在未經酸蝕的狀態下,其表面的塗抹層皆被移除,構造呈現鱗片狀,且牙本質小管開口的形態清晰可見,此外,可以見到管周牙本質(peritubular dentin)突出於管間牙本質(intertubular dentin)之上,顯示出Er,Cr:YSGG雷射對於管間牙本質具有較強的移除作用。而在劈開觀察介面的部分,則可以看到不論是高速磨牙鑽針或是Er,Cr:YSGG雷射所製備之窩洞,經過37%磷酸酸蝕後之試片都可以見到許多的樹脂突延伸到牙本質小管中,且其基部呈現漏斗狀(funnel-shaped);Er,Cr:YSGG雷射製備而無酸蝕的試片中,也可以看到多量且長的樹脂突進入到牙本質小管中,而呈現圓柱狀(cylindrical shape)的形態。至於在第三部分的拉力測試實驗中,A組(高速磨牙鑽針並以37%磷酸酸蝕)的tensile bond strength平均為5.37 MPa,B組(Er,Cr:YSGG雷射並以37%磷酸酸蝕)為5.17 MPa,C組(Er,Cr:YSGG雷射無酸蝕)則為3.29 MPa。統計結果顯示A、B兩組之間沒有顯著的差異(p > 0.05),而B、C兩組之間則有顯著的差異(p < 0.05)。在斷裂模式方面,依照光學立體顯微鏡觀察的結果,A組的斷裂模式有5個type 1(adhesive failure)、4個type 2(partial adhesive and cohesive failure)、以及1個type 3(cohesive failure in resin);B組的斷裂模式有3個type 1以及7個type 2;C組則為7個type 1以及3個type 2。 Er,Cr:YSGG雷射製備後的窩洞可與複合樹脂之間產生良好的鍵結關係,由拉力測試實驗中可以發現,不論是高速磨牙鑽針或是Er,Cr:YSGG雷射所製備之窩洞,在酸蝕過後皆會加強牙本質與複合樹脂間的鍵結關係。由於Er,Cr:YSGG雷射作用在牙本質上的機制目前尚未能完全透徹了解,因此我們還必須進行更多的實驗以及研究,期能在臨床上提供更有價值的應用。 | zh_TW |
dc.description.abstract | For many years, dentists have used conventional mechanical high speed systems to remove diseased dental hard tissues and prepare cavities for restoration. This process is efficient but uncomfortable for the patient. Therefore, lots of investigators tried hard to obtain a new model to solve these problems. Research concerning dental applications of lasers has been undertaken for more than 40 years. Recently, Er:YAG and Er,Cr:YSGG lasers, with wavelengths corresponding to absorption peaks for water and hydroxyapatite, have been shown to remove dental hard tissue effectively without causing undesirable thermal effects. Based on the literature reviews, the dentin surface after Er,Cr:YSGG laser irradiation was very clean, with patent tubule orifices and lacked of smear layer coverings. So it might be a favorable technique for the removal of carious dentin and cavity preparation, followed by composite resin restoration. However, surprisingly little attention has given to the evaluation of the quality of the Er,Cr:YSGG laser irradiated dentin surface for composite resin bonding. Thus the aim of this study was to investigate bonding between human dentin and composite resins in cavities prepared with an Er,Cr:YSGG laser, compared with high-speed drills. The morphological features of the irradiated dentin after acid etching were also observed.
This study consisted of three parts. The first part compared the morphological analysis of the prepared dentin surface between Er,Cr:YSGG laser irradiation and high speed bur drilling, before and after 37% phosphoric acid etching. The laser was set at 3.0 W with 80% water and 80% air, in non-contact mode. The 2 x 2 mm square and 1 mm deep cavities, which were prepared on approximate 3 mm thick dentin disks, were then observed under light stereoscopy and scanning electron microscopy. The second part of our study was to observe the resin-dentin bonding interfaces. The cavities grouped as the first part were treated with adhesive (One Coat Bond, Coltene®) followed by composite resin (Palfique Estelite Paste) restoration. After splitting, the dentin discs were observed under scanning electron microscopy after dentin-resin interface demineralization (10N HCl) and deproteinization (1% NaOCl). The final component of this study was to estimate the tensile bond strength of the groups just like the above. The INSTRON Universal Testing Machine was chosen with testing speed set at 0.5 mm/min. After test, the data was computed by Kruskall-Wallis statistics and the fracture modes were recorded, followed by scanning electron microscopy observation. The Er,Cr:YSGG laser beam produced cavities without signs of thermal damage of dentin. Undesirable thermal effects such as surface cracking or carbonization were not observed. In cavities prepared with high-speed drills, resin tags were more frequent and thicker in dentin subjected to acid etching then without etching. Bonding to laser irradiated dentin resulted in more and thicker resin tags in cavities compared with high speed drills; moreover, the removal of intertubular dentin was more prominent than peritubular dentin. Acid etching resulted in hybrid layers that could be detected under SEM observation. The tensile bond strength of the high speed bur preparation after acid etching was 5.37 MPa, which is not significantly different (p > 0.05) to that of Er,Cr:YSGG laser irradiation after acid etching, 5.17 MPa. The tensile bond strength of the Er,Cr:YSGG laser irradiation without acid etching was 3.29 MPa, which is significantly lower (p < 0.05) than the above two. As for the fracture modes, 5 adhesive failures (type 1), as well as 4 partial adhesive and partial cohesive failure (type 2) and 1 cohesive failure in resin (type 3) were noted in the group treated with high speed bur preparation with acid etching. 3 type 1 and 7 type 2 failure modes were in the teeth irradiated with Er,Cr:YSGG laser with acid etching. Without acid etching, 7 type 1 and 3 type 2 failure modes were recorded. These findings indicated that it is possible to remove dentin using Er,Cr:YSGG laser irradiation with minimal thermal damage. Bonding between resin and dentin after laser irradiation was equivalent to the conventional technique. Further studies should be conducted in order to obtain more information about the characteristics of Er,Cr:YSGG laser irradiated dentin. | en |
dc.description.provenance | Made available in DSpace on 2021-06-13T16:48:03Z (GMT). No. of bitstreams: 1 ntu-94-R91422011-1.pdf: 6797790 bytes, checksum: e4c1f34f96f6eb83a4a339ee6dc9e18f (MD5) Previous issue date: 2005 | en |
dc.description.tableofcontents | 目 錄
頁 次 謝誌 i 中文摘要 iii 英文摘要 vi 目錄 ix 表目錄 x 圖目錄 xi 第一章 前言 1 第二章 文獻回顧 4 第三章 實驗動機與目的 26 第四章 實驗材料與方法 28 第五章 實驗結果 44 第六章 實驗結果討論 53 第七章 結論 66 第八章 建議事項 68 第九章 參考文獻 71 | |
dc.language.iso | zh-TW | |
dc.title | Er,Cr:YSGG 雷射製備牙本質窩洞之形態分析及複合樹脂填補後鍵結關係之探討 | zh_TW |
dc.title | Dentin Bonding after Cavity Preparation Using Er,Cr:YSGG Laser | en |
dc.type | Thesis | |
dc.date.schoolyear | 93-2 | |
dc.description.degree | 碩士 | |
dc.contributor.coadvisor | 林俊彬(Chun-Pin Lin) | |
dc.contributor.oralexamcommittee | 曹培熙(Pei-Hsi Tsao) | |
dc.subject.keyword | Er,Cr:YSGG雷射,酸蝕,牙本質,掃描式電子顯微鏡,鍵結,混合層, | zh_TW |
dc.subject.keyword | Er,Cr:YSGG laser,acid etching,dentin,scanning electron microscopy,adhesion,hybrid layer, | en |
dc.relation.page | 110 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2005-06-28 | |
dc.contributor.author-college | 醫學院 | zh_TW |
dc.contributor.author-dept | 臨床牙醫學研究所 | zh_TW |
顯示於系所單位: | 臨床牙醫學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-94-1.pdf 目前未授權公開取用 | 6.64 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。