請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/38257
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 馬劍清 | |
dc.contributor.author | Hsiang-Wei Ho | en |
dc.contributor.author | 何祥瑋 | zh_TW |
dc.date.accessioned | 2021-06-13T16:28:55Z | - |
dc.date.available | 2007-07-29 | |
dc.date.copyright | 2005-07-29 | |
dc.date.issued | 2005 | |
dc.date.submitted | 2005-07-13 | |
dc.identifier.citation | 參考文獻
[1]Leith, E. N. and Upatnieks, J., “Reconstructed Wavefronts and Communication Theory,” Journal of Optical Society of America, 52, 1123-1130 (1962). [2] Butters, J. N. and Leendertz, J. A., “Speckle Pattern and Holographic Techniques in Engineering Metrology,” Optics and Laser Technology, 3(1), 26-30 (1971). [3] Slettemoen, G. A., “General Analysis of Fringe Contrast in Electronic Speckle Pattern Interferometry,” Optica Acta, 26(3), 313-327 (1979). [4] Jones, R. and Wykes, C., “General Parameters for the Design and Optimization of Electronic Speckle Pattern Interferometers, “ Optica Acta, 28(7), 949-972 (1981). [5] Wykes, C., “Use of Electronic Speckle Pattern Interferometry (ESPI) in the Measurement of Static and Dynamic Surface Displacement,” Optical Engineering, 21(3), 400-406 (1982). [6] Moore, A. J. and Tyrer, J. R., “An Electronic Speckle Pattern Interferometer for Complete In-plane Displacement Measurement,” Measurement Science and Technology, 1, 1024-1030 (1990). [7] Holownia, B. P.,“Non-Destructive Testing of Overlap Shear Joints using Electronic Speckle Pattern Interferometry,” Optics and Lasers in Engineering, 6(2), 79-90 (1985). [8] L.kberg, O. J. and Malmo, J. T.,“Detection of Defects in Composite Materials by TV Holography,” NDT International, 21(4), 223-228 (1988). [9] Liu, W. and Tan, Y.,“Singlemode Optical Fiber Electronic Speckle Pattern Interferometry,” Optics and Lasers in Engineering, 25(2-3), 103-109 (1996). [10] Nakadate, S., Saito, H. and Nakajima, T., “Vibration Measurement using Phase-Shifting Stroboscopic Holographic Interferometry,” Optical Acta, 33(10), 1295-1309 (1986). [11] Winther, S., “3D Strain Measurement using ESPI,” Optics and Lasers in Engineering, 8(1), 45-57 (1988). [12]Malmo, J. T., Lkberg, O. J. and Slettemoen, G. A., “Interferometric Testing at Very High Temperatures by TV-Holography,” Experimental Mechanics, 28(3), 315-321 (1988). [13] Ratnam, M. M., Evans, J. R. and Tyrer, J. R., “Measurement of Thermal Expansion of a Piston using Holographic and Electronic Speckle Pattern Interferometry,” Optical Engineering, 31(1), 61-69 (1992). [14]Jones, R. and Wykes, C., Holographic and Speckle Interferometry, Cambridge University Press (1989). [15] Butters, J. N. and Leendertz, J. A., “Speckle Pattern and Holographic Techniques in Engineering Metrology,” Optics and Laser Technology, 3(1), 26-30(1971). [16] L.kberg, O. J., “Electronic Speckle Pattern Interferometry,” Physics in Technology, 11, 16-22 (1980). [17] L.kberg, O. J., “ESPI-The Ultimate Holographic Tool for Vibration Analysis,” Journal of Acoustic Society of America, 75(6), 1783-1791 (1984). [18] Creath, K. and Slettemoen, G. A., “Vibration-Observation Techniques for Digital Speckle-Pattern Interferometry, ” Journal of Optical Society of America (A), 2(10), 1629-1636 (1985). [19] H.gmoen, K. and L.kberg, O. J., “Detection and Measurement of Small Vibrations using Electronic Speckle Pattern Interferometry,” Applied Optics, 16(7), 1869-1875 (1977). [20] Slettemoen, G. A.,“Electronic Speckle Pattern Interferometric Systems Based on a Speckle Reference Beam,” Applied Optics, 19(4), 616-623 (1980). [21] Nakadate, S., Saito, H. and Nakajima, T., “Vibration Measurement using Phase-Shifting Stroboscopic Holographic Interferometry,” Optical Acta, 33(10), 1295-1309 (1986). [22] L.kberg, O. J. and Malmo, J. T., “Long-Distance Electronic Speckle Pattern Interferometry,” Optical Engineering, 27(2), 150-156 (1988). [23] Boxiang, L., Harald, A., Heiner, E. and Eckhardt, Z., “Real Time Investigation of Rotating Objects using ESPI System, ” Proceeding of SPIE, 1026, 218-221 (1988). [24] Shellabear, M. C. and Tyrer, J. R., “Application of ESPI to Three-dimensional Vibration Measurements,” Optics and Lasers in Engineering, 15, 43-56 (1991). [25] Ellingsrud, S. and Rosvold, G. O., “Analysis of a data-based TV-Holography System used to Measure Small Vibration Amplitudes,” Journal of Optical Society of America (A), 2(10), 1629-1636 (1985). [26] Wang, W. C., Hwang, C. H. and Lin, S. Y., “Vibration Measurement by the Time-Averaged Electronic Speckle Pattern Interferometry Methods,” Applied Optics, 35(22), 4502-4509 (1996). [27] Huang, C. H. and Ma, C. C, “Vibration Characteristics for piezoelectric Cylinders using Amplitude-Fluctuation Electronic Speckle Pattern Interferometry,” AIAA Journal, 36(12), 2262-2268 (1998). [28]Huang, C. H. and Ma, C. C, “Vibration Characteristics of Composite Piezoceramic Plates at Resonant Frequencies: Experimental and Numerical Calculations,” IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 48(4), 1147-1156 (2001). [29] 謝東明,應用電子斑點光學干涉術探討含缺陷平板之振動特性,國立台灣大學機械工程研究所碩士論文,1999年6月. [30]. Lin, H. Y. and Ma, C. C., “Experimental Investigations on Dynamic Characteristics of a Multilayer Piezoelectric Stack Actuator,” The Chinese Journal of Mechanics-Series A, 18(2), 95-102 (2002). [31] Lin, H. Y., Huang, J. H. and Ma, C. C., “Vibration Analysis of Angle-Ply Laminated Composite Plates with an Embedded Piezoceramic Layer,” IEEE Trans. Ultrasonics, ferroelectrics, and Frequency Control, 50(9), 1084-1099 (2003). [32] Huang, J. H., Ma, C. C. and Lin, Y. C, “Theoretical, Numerical, and Experimential Investigation on Resonant Vibrations of Piezoceramic Annular Disks,” IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control , (2005). [33] Jeong, T. G. and Bogy, D. B., “Natural Frequencies of Sliders and Transducers used to Detect Slider-Disk Contacts,” IEEE Transactions on Magnetics, 25(5), 3725-3727 (1989). [34] Sun, F. P., Mitchell, L. D. and Arruda, J. R. F., “Mode Decoupling Considerations in Mode Shape Measurements of a Plate with Monoexcitation and Laser Doppler Vibrometer,” Experimental Techniques, 17(4), 31-37 (1993). [35] Nishizawa, O., Satoh, T. and Lei, X., “Detection of Shear Wave in Ultrasonic Range by using a Laser Doppler Vibrometer,” Review of Scientific Instruments, 69(6), 2572-2573 (1998). [36] Rossi, G. L., Santolini, C., Giachi, M. and Generosi, S., “The Application of a Laser Scanning Vibrometer for Dynamic Characterization of Large Impellers,” Measurement, 24(1), 33-41 (1998). [37] Francois, M. G. and Jacek, J., “Electromechanical Response of Polymer Films by Laser Doppler Vibrometry,” Journal of Acoustic Society of America, 103(3), 1421-1427 (1996). [38] Lee, C. K. and Wu, G. Y., “High Performance Doppler Interferometer for Advanced Optical Storage System,” Japanese Journal of Applied Physics, 38(3B), 1730-1741 (1999). [39] Kyihwan, P., Seonjae, K., Sangyol, Y. and Jekil, R., “Development of Continuous Scanning Laser Doppler Vibrometer for Vibration Mode Shape Analysis,” Proceedings of the 2000 IEEE International Conference on Control Applications, September, 25-27 (2000). [40] Koga, I., “Radio-Frequency Vibrations of Rectangular AT-Cut Quartz Plates,” Journal of Applied Physics, 34(8), 2357-2365 (1963). [41] Holland, R., “Contour Extensional Resonant Properties of Rectangular Piezoelectric Plates,” IEEE Transactions on Sonics and Ultrasonics, SU-15(2), 97-105 (1968). [42] Tiersten, H. F., Linear Piezoelectric Plate Vibrations, Plenum, New York (1969). [43] Adelman, N. T. and Stavsky, Y., “Axisymmetric Vibrations of Radially Polarized Piezoelectric Ceramic Cylinders,” Journal of Sound and Vibration, 38(2), 245-254 (1975). [44] Lin, M. W., Abatan, A. O. and Rogers, C. A., “Application of commercial finite element codes for the analysis of induced strain-actuated structures,” Journal of Intelligent Material Systems and Structures, 5(6), 869-875 (1994). [45] Kharouf, N. and Heyliger, P. R., “Axisymmetric Free Vibration of Homogeneous and Laminated Piezoelectric Cylinders,” Journal of Sound and Vibration, 174(4), 539-561(1994). [46] Kunkel, H.A., Locke, S. and Pikeroen, B., “Finite-Element Analysis of Vibrational Modes in Piezoelectric Ceramics Disks,” IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 37(4), 316-328 (1990). [47] Guo, N., Cawley, P. and Hitchings, D., “The Finite Element Analysis of the Vibration Characteristics of Piezoelectric Discs,” Journal of Sound and Vibration, 159(1), 115-138 (1992). [48] Huang, C. H. and Ma, C. C,“Vibration Characteristics of Composite Piezoceramic Plates at Resonant Frequencies: Experimental and Numerical Calculations,” IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 48(4), 1147-1156 (2001). [49] Koyuncu, B., “The Investigation of High Frequency Vibration Modes of PZT-4 Transducers using ESPI Techniques with Reference Beam Modulation,” Optics and Lasers in Engineering, 1(1), 37-49 (1980). [50] Chang, M., “In-plane Vibration Displacement Measurement Using Fiber-Optical Speckle Interferometry,” Precision Engineering, 16(1), 36-41 (1994). [51] Oswin, J. R., Salter, P. L., Santoyo, F. M. and Tyrer, J. R., “Electronic Speckle Pattern Interferometric Measurement of Flextensional Transducer Vibration Patterns: in Air and Water,” Journal of Sound and Vibration, 172(4), 433-448 (1994). [52] Petzing, J. N. and Tyrer, J. R., “Improved Interferometric Techniques for Measuring Flextensional Transducer Vibration Patterns Underwater,” Journal of Sound and Vibration, 193(4), 877-890 (1996). [53] Wolff, A., Cramer, D., Hellebrand, I., Probst, I. and Lubitz, K., “Optical Two Channel Elongation Measurement of PZT Piezoelectric Multilayer Stack Actuators,” Proceedings of the ninth IEEE International Symposium on 1994, Applications of Ferroelectronics, 755-757 (1994). [54] Stewart, M., Cain, M. G. and Battrick, W., “Surface Displacement Mapping of Piezoelectric Multilayer Actuators,” Eighth International Conference on Dielectric Materials, Measurements and Applications, (IEE Cof, pub), 473, 445-447 (2000). [55] Moilanen, H. and Leppavuori, S., “Laser Interferometric Measurement of Displacement-Field Characteristics of Piezoelectric Actuators and Actuator Materials,” Sensors and Actuators, A: Physical, 92(1-3), 326-334 (2001). [56] Bailey, T., James, T. and Hubbard, J., 'Distributed Piezoelectric Polymer Active Vibration Control of a Cantilever Beam,' AIAA Journal, 8(5), 605-611 (1985). [57] Crawley, E. F. and de Luis, J., “Use of Piezoelectric Actuators as Elements of Intelligent Structures, ” AIAA Journal, 25(10), 1373-1385 (1987). [58] Lee, C. K., “Theory of Laminated Piezoelectric Plates for the Design of Distributed Sensors/Actuators, Part I: Governing Equations and Reciprocal Relationships,” Journal of Acoustic Society of America, 87(3), 1144-1158 (1990). [59] Bhargava, A., Chaudhry, Z., Liang, C. and Rogers, C. A., 'Experimental Verification of Optimal Actuator Location and Configuration Based on Actuator Power Factor,' Journal of Intelligent Material Systems and Structures, 6(3), 411-418 (1995). [60] Kim, S. J. and Jones, J. D., “Quasi-Static Control of Natural Frequencies of Composite Beams using Embedded Piezoelectric Actuators,” Smart Materials and Structures, 4(2), 106-112 (1995) . [61] Chang, S. H. and Chou, C. C., “Electromechanical Analysis of an Asymmetric Piezoelectric/Elastic Laminate Structure: Theory and Experiment,” IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 46(2), 441-451 (1999). [62] Chang, S. H. and Tung, Y. C., “Electro-elastic Characteristics of Asymmetric Rectangular Piezoelectric Laminate,” IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 46(4), 950-960 (1999). [63] Chang, S. H., Du, B. C. and Lin, J. F., “Electro-Elastic Modeling of annular Piezoceramic Actuating Disk Transducers,” Journal of Intelligent Materials Systems and Structures, 10(5), 410-421 (2000). [64] Hernandes, J. A., Almeida, S. F. M. and Nabarrete, A.,“Stiffening Effects on the Free Vibration Behavior of Composite Plates with PZT Actuators,” Composite Structures, 49(1), 55-63 (2000). [65] Mindlin, R. D., “Forced Thickness –Shear and Flexural Vibrations of Piezoelectric Crystal Plates,” Journal of Applied Physics, 22(1), 83-88(1952). [66] Eer Nisse, E. P., “Variational Method for Electroelastic Vibration Analysis,” IEEE Trans. Sonics and Ultrason., SU-14(4), 153-160 (1967). [67] Shaw, E. A. G., “On the Resonant Vibrations of Thick Barium Titanate Discs Variation Method for Electroelastic Vibration Analysis,” Journal of Acoustical Society of America, 28, 38-50 (1956). [68] Holland, R., “Contour Extensional Resonant Properties of Rectangular Piezoelectric Plates,” IEEE Transactions on Sonics and Ultrasonics, SU-15(2), 97-105 (1968a). [69] Holland, R.,“Resonant Properties of Piezoelectric Ceramics Rectangular Parallelepipeds,” Journal of Acoustical Society of America, 43(5), 988-997 (1968b). [70]Vokodav, I. F., Karlash, V. L. and Uliko, A. F., “Asymmetric Vibrations of Thin Piezoceramic Disks with Split Electrodes ,”International Applied Mechanics,15(2) ,77-82,(1979) . [71] Boriseiko, V.A. and Uliko, A. F.,“Asymmetric Oscillations of Thin Piezoelectric ceramic Spherical Shell Disks,”International Applied Mechanics,10(10) ,3-10,(1974) . [72] Kunkel, H.A., Locke, S. and Pikeroen, B.,“Finite-Element Analysis of Vibrational Modes in Piezoelectric Ceramics Disks,” IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 37(4), 316-328 (1990). [73] Guo, N., Cawley, P. and Hitchings, D., “The Finite Element Analysis of the Vibration Characteristics of Piezoelectric Discs,” Journal of Sound and Vibration, 159(1), 115-138 (1992). [74] Rogacheva, Nellya N., The Theory of Piezoelectric Shells and Plates, CRC Press, USA, (1994). [75] Heyliger, P. R. and Ramirez, G., “Free Vibration of Laminated Circular Piezoelectric Plates and Discs,” Journal of Engineering Mathematics, 229(4), 935-956 (2000). [76] Jones, R. and Wykes, C., Holographic and Speckle Interferometry, Cambridge University Press (1989). [77]黃吉宏,應用振幅變動電子斑點干涉術探討三維壓電材料體及含裂紋板的振動問題,國立台灣大學機械工程研究所博士論文,87年6月. [78]Wykes, C.,“Use of Electronic Speckle Pattern Interferometry (ESPI) in the Measurement of Static and Dynamic Surface Displacement,” Optical Engineering, 21(3), 400-406 (1982). [79]黃育熙,壓電石英晶體之平板結構的動態特性研究,國立台灣大學機械工程研究所碩士論文,92年6月. [80]Daniel, R., Elastic Waves in Solids II, Springer-Verlag, Germany, 2000. [81]H. F. Tiersten, Linear Piezoelectric Plate Vibrations. New York: Plenum, (1969). [82]Rogacheva, Nellya N.,The Theory of Piezoelectric Shells and Plates, CRC Press, USA, (1994). [83]林育志,壓電元件於不同介質中的動態特性研究與實驗量測,國立台灣大學機械工程研究所博士論文,93年6月. [84]Mason, W. P., Piezoelectric Crystals and Their Application to Ultrasonics. New York : Van Nostrand,(1950). | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/38257 | - |
dc.description.abstract | 由於壓電陶瓷圓盤及圓環具有較簡單且對稱之幾何形狀,使其不論在理論分析推導或試片的製造上都較為容易且常見,因此在實際應用上佔有很大的比例。為了增進邊界效應對壓電陶瓷圓盤和圓環在頻率、振型及機電耦合係數影響差異性的瞭解,因此在其共振頻率及共振模態的實驗量測上有其必要性。本文將針對壓電陶瓷圓盤和壓電陶瓷圓環的振動特性進行理論分析,數值計算和實驗研究,以期對壓電元件之振動行為有完整的了解。
本論文首先推導固定邊界壓電陶瓷圓盤,和單邊固定壓電陶瓷圓環的理論分析,在面外彎曲振動理論推導考慮非對稱的振動模態,而面內徑向和切向振動只探討對稱的模態,文中使用光學全域式的振幅變動電子斑點干涉術以及逐點式的雷射都卜勒振動儀和阻抗分析儀等三種實驗量測技術,並配合有限元素分析針對壓電陶瓷圓盤及圓環的振動特性加以分析,以期能對於壓電陶瓷元件更廣泛之應用與更深入的研究分析能有所助益。文中對於力學問題的振動頻率和模態以及電學問題的電流及機電耦合係數皆有深入且詳細的探討。 | zh_TW |
dc.description.abstract | The piezoceramic circular and annular plates have simple and symmetrical geometrical shapes. Therefore, it is easy for theoretical analysis and the manufacturing of specimen. These piezoceramic devices have many industrial applications. To have a thoroughly understanding of frequencies, mode shape and electromechanical coupling coefficient for piezoceramic circular and annular plates, the experimental measurement of resonant frequencies and mode shapes is needed. This thesis will focus on the theoretical analysis, numerical calculation and experimental measurement of piezoceramic annular plates for resonant frequencies and vibration mode shapes.
This thesis will, at first, analyze theoretically the dynamic characteristics analysis of piezoceramic circular plates with fixed boundary and piezoceramic annular plates with one fixed boundary. In out-of-plane vibration (transverse) analysis, the non-symmetric modes are investigated. In in-plane (extensional and tangential) vibration, only the symmetric modes are considered .In this study, three experimental techniques, including AF-ESPI, LDV, and impedance analyzer, are used to obtain the vibration characteristics of piezoceramic circular and annular plates .The experimental results are compared with the FEM and analytical solutions . The resonant frequency, mode shape,electric current and electromechanical coupling coefficient for out-of-plane and in-plane vibration modes are analyzed and discussed in detail . | en |
dc.description.provenance | Made available in DSpace on 2021-06-13T16:28:55Z (GMT). No. of bitstreams: 1 ntu-94-R92522522-1.pdf: 2058977 bytes, checksum: 3988a96b55b2e0be0c2b804c502bd645 (MD5) Previous issue date: 2005 | en |
dc.description.tableofcontents | 目 錄
中文摘要 一 英文摘要 二 目錄 四 表目錄 七 圖目錄 九 符號說明 一二 第一章 緒論 1-1 研究動機 1 1-2 文獻回顧 2 1-3 內容簡介 12 第二章 實驗技術的理論推導及系統架設 2-1 電子斑點干涉術的基本理論 14 2-1-1 面外振動量測的原理與架設 15 2-1-2 面內振動量測的原理與架設 20 2-1-3 電子斑點干涉術之實驗與理論關係探討 22 2-2 雷射都卜勒振動儀暨動態信號分析儀 25 2-2-1都卜勒效應於量測應用之簡介 25 2-2-2雷射都卜勒振動儀的量測原理 28 2-2-3雷射都卜勒動態信號分析之量測系統架設說明 32 2-3阻抗分析原理和儀器介紹 34 2-3-1阻抗分析儀的基本原理 34 2-3-2阻抗分析儀的實驗設備 35 第三章 壓電陶瓷圓盤振動特性分析 3-1壓電理論 38 3-2固定邊界壓電陶瓷圓盤振動特性理論分析 44 3-2-1 壓電陶瓷圓盤振動特性分析理論推導 44 3-2-1 壓電陶瓷圓盤彎曲振動特性理論分析 47 3-2-2 壓電陶瓷圓盤切向振動特性理論分析 51 3-2-3 壓電陶瓷圓盤徑向伸展振動特性理論分析 53 3-3壓電陶瓷圓盤振動特性實驗量測與數值分析、理論解析之比較 56 3-3-1壓電陶瓷圓盤彎曲振動實驗量測與數值分析、理論解析之比較 56 3-3-2壓電陶瓷圓盤面內振動實驗量測與數值分析、理論解析之比較 61 3-3-3壓電陶瓷圓盤剪切振動數值分析與理論解析結果之比較 65 第四章 壓電陶瓷圓環振動特性分析 4-1壓電陶瓷圓環振動特性理論分析 85 4-1-1 壓電陶瓷圓環振動特性分析理論推導 85 4-1-2 壓電陶瓷圓環彎曲振動特性理論分析 86 4-1-3 壓電陶瓷圓環剪切振動特性理論分析 91 4-1-4 壓電陶瓷圓環徑向伸展振動特性理論分析 94 4-2壓電陶瓷圓環振動特性實驗量測與數值分析、理論解析之比較 99 4-2-1壓電陶瓷圓環彎曲振動實驗量測與理論解析、數值分析之比較 99 4-2-2壓電陶瓷圓環徑向伸展振動實驗量測與理論解析、數值分析之比較 105 4-2-3壓電陶瓷圓環剪切振動理論解析與數值分析結果之比較 111 第五章 結論與展望 5-1 本文主要成果 139 5-2 未來展望 140 參考文獻 141 | |
dc.language.iso | zh-TW | |
dc.title | 壓電圓盤與壓電圓環共振特性的理論分析與實驗量測 | zh_TW |
dc.title | Theoretical Analysis and Experimental Measurements on Resonant Characteristics of Piezoceramic Circular and Annular Plates | en |
dc.type | Thesis | |
dc.date.schoolyear | 93-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 羅裕龍,李永春,黃吉宏,馬劍清 | |
dc.subject.keyword | 壓電陶瓷,共振頻率,共振模態,機電耦合係數, | zh_TW |
dc.subject.keyword | piezoceramic,resonant frequencies,resonant mode shapes,electromechanical coupling coefficient, | en |
dc.relation.page | 150 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2005-07-13 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-94-1.pdf 目前未授權公開取用 | 2.01 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。