請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/37808
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 邱文英(Wen-Yen Chiu) | |
dc.contributor.author | Min-Chi Hsieh | en |
dc.contributor.author | 謝閔琪 | zh_TW |
dc.date.accessioned | 2021-06-13T15:44:53Z | - |
dc.date.available | 2010-07-15 | |
dc.date.copyright | 2008-07-15 | |
dc.date.issued | 2008 | |
dc.date.submitted | 2008-07-02 | |
dc.identifier.citation | 1. 陳岡宏,膜紡織品專題調查. 紡織綜合所出版 2005.
2. 吳文演,奈米材料與技術在紡織產業上之應用. 台灣科技大學. 3. 王建義,薄膜工程學. 2004. 4. Desgreniers, S. Physics Review B 1998, 58, (14), 102. 5. Spanhel, L.; Anderson, M. A. American Chemical Society 1991, 113, 2826. 6. Tang, E.; Cheng, G.; Pang, X.; Ma, X.; Xing, F. Colloid and Polymer Science 2006, 284, (4), 422-428. 7. Chakrabarti, S.; Dutta, B. K. Hazardous Materials 2004, 112, (3), 269-278. 8. Matsubara, K.; Fons, P.; Iwata, K.; Yamada, A.; Sakurai, K.; Tampo, H.; Niki, S. Thin Solid Films 2003, 431-432. 9. Tokumoto, M. S.; Pulcinelli, S. H.; Santilli, C. V.; Briois, V. Physical Chemistry B 2003, 107, (2), 568-574. 10. Taubert, A.; Weiss, O.; Piccini, M. T.; Batchelder, D. N. Chemical Materials 2002, 14, 2594. 11. Purica, M.; Budianu, E.; Rusu, E.; Danila, M.; Gavrila, R. Thin Solid Films 2002, 485-488. 12. Liewhiran, C.; Seraphin, S.; Phanichphant, S. Current Applied Physics 2006, 6, (3), 499-502. 13. Chang-Wei, L.; Jian-Lin, S. Thermochimica Acta 1994, 232, 77. 14. Lu, C. W.; Shi, J. L. Thermochimica Acta 1994, 232, 77. 15. Klingshirn, C. ChemPhysChem 2007, 8, 782-803. 16. Schafthaul, K. Gelehrte Anzeigen Bayer Akal 1845, 20:557. 17. Bayer, K. J. cited by HABASHI F In:A Textbook of Hydrometallurgy 1887, Libraire Universitaire du Quebec, 10. 18. Yoshimura, M.; Byrappa, K. Handbook of Hydrothermal Technology 2001. 19. Lu, C. H.; Yeh, C. H. Ceramics International 2000, 26, 351-357. 20. Noshir, P. S.; Kathleen, S. J.; Peter, S. C. Physical Chemistry B 2003, 107, (38), 10412-10415. 21. Guo, M.; Diao, P.; Cai, S. Applied Surface Science 2005, 249, 71-75. 22. Yi, S. H.; Choi, S. K.; Jang, J. M.; Kim, J. A.; Jung, W. G. Colloid and Interface Science 2007, 313, 705-710. 23. Lu, C. H.; Hwang, W. J.; Godbole, S. V. Materials Research Society 2005, 20, (2), 464-471. 24. Lepot, N.; Bael, M. K. V.; Rul, H. V. D.; D'Haen, J.; Peeters, R.; Franco, D.; Mullens, J. Materials Letters 2007, 61, 2624-2627. 25. Shirakawa, H.; Louis, E. J.; MacDiarmid, A. G.; Chiang, C. K.; Heeger, A. J. Chemical Society 1977, 16, 578. 26. Fichou, D. Handbook of Oligo- and Polythiophenes 1999, Wiley-VCH,Weinheim. 27. Tracht, U.; Kirchmeyer, S. 5th International Symposium on Functional pi-Electron Systems 2002, Ulm, Germany. 28. Reuter, K.; Nikanorov, V. A.; Bazhenov, V. M. EP 1 375 560(H. C. Starck GmbH) 2002. 29. Jonas, F.; Krafft, W.; Muys, B. Macromolecular Symposia 1995, 100, 169. 30. Hotta, O.; Soga, S.; Sonoda, N. JP 02129284 (Matsushita Electric Ind. Co.) 1988. 31. Thiess, A. Deutsche Gebrauchsmusterschrift 2001, DE 20021226 U1. 32. Hardtke, G.; Fuchs, H. Technomer 16th Fachtagung uber Verabeitung and Anwendung von Polymeren 1999, Universitat Chemnitz Institut fur Allgemeinen Maschinenbau and Kunststoffetchnik, Chemnitz, Germany, C15/1-C15/5. 33. Morimoto, Y. JP 2000 026817 A2 (Teijin Ltd.) 1998. 34. Nittel, F.; Randolph, H.; Himmelmann, W. EP 554 588 (Agfa AG) 1993. 35. Shinohara, H. JP 2003 246874 A2 (HS planning Y. K.) 2003. 36. Jonas, F.; Heywang, G.; Schmidtberg, W. EP 340 512 (Bayer AG) 1988. 37. Prymak, J. D. Implied Power Electronics Conference and Exposition,16th Annual IEEE 2001, 2, 1210. 38. Hupe, J.; Wolf, G. D.; Jonas, F. Galvanotechnik 1995, 86, (10), 3404. 39. Tang, C. W.; VanSlyke, S. A. Applied Phisics Letters 1987, 51, 913. 40. Burroughes, J. H.; Bradley, D. D. C.; Brown, A. R.; Marks, R. N.; Mackay, K.; Friend, R. H.; Burns, P. L.; Holmes, A. B. Nature 1990, 347, 6293,539. 41. Kumer, A.; Reynolds, J. R. Macromolecules 1996, 29, 7629. 42. Leeuw, D. M. d.; Kraakman, P. A.; Bongaerts, P. F. G.; Muysaers, C. M. J.; Klaassen, D. B. M. Synthetic Metals 1994, 66, 263. 43. AG, B. US Patent 5 792 558 1996. 44. Yamato, H.; Kai, K.; Ohwa, M.; Asakura, T.; Kosjiba, T.; Warnet, W. Synthetic Metals 1996, 83, 125. 45. Sakmeche, N.; Bazzaoui, E. A.; Fall, M.; Aeiyach, S.; Jouini, M.; Lacroix, J. C.; Aaron, J. J.; C.Lacaze, P. Synthetic Metals 1997, 84, 191. 46. Yamamoto, T.; Abla, M.; Shimizu, T.; Komarudin, D.; Lee, B. L.; Kurokawa, E. Polymer Bulletin 1999, 42, 321. 47. Komarneni, S. Materials Chemistry 1992, 2. 48. Messersmith, P. B. Chemical Materials 1994, 6, (10). 49. Kazakos-Kijowski, A.; Komarneni, S.; Roy, R. Materials Research Society 1988, 121, 245. 50. Shelleman, R. A.; Messing, G. L.; Kumagai, M. Non-Crystal Solids 1986, 82, 277. 51. Selvaraj, U.; Prasadarao, A. V.; Komarenei, S.; Roy, R. American Ceramic Society 1992, 75, 1167. 52. Vilmin, G.; Komarneni, S.; Roy, R. Materials Science 1987, 22, 3556. 53. Burggraaf, A. J.; Keizer, K.; Hassel, B. A. V. Solid State Ionics 1989, 32-33, 771. 54. Prasad, P. N. Material Research Society 1990, 180, 741. 55. Newnham, R. E.; McKinstry, S. E.; Ikawa, H. Material Research Society 1990, 175, 161. 56. Ha, Y.-H.; Nikolov, N.; Pollack, S. K.; Mastrangelo, J.; Martin, B. D.; Shashidhar, R. Advanced Functional Materials 2004, 14, (6), 615-622. 57. Yamabi, S.; Imai, H. Materials Chemistry 2002, 12, 3773-3778. 58. Govender, K.; Boyle, D. S.; Kenway, P. B.; O'Brien, P. Materials Chemistry 2004, 14, 2575-2591. 59. Tada, J. H. American Chemical Society 1960, 82, 255. 60. Strom, J. G.; Jun, H. W. Pharmaceutical Sciences 1980, 69, (11), 1261-1263. 61. Fang, Y.; Pang, Q.; Wen, X.; Wang, J.; Yang, S. Small 2006, 2, (5), 612-615. 62. Sawada, H.; Wang, R.; Sleight, W. A. Solid State Chemistry 1996, 122, 148. 63. Greene, L. E.; Law, M.; Goldberger, J.; Kim, F.; Johnson, J. C.; Zhang, Y. F.; Saykally, R. J.; Yang, P. D. Angewandte Chemie International Edition 2003, 42, 3031. 64. Liu, B.; Zeng, H. C. American Chemical Society 2003, 125, 4430. 65. Kyung, H. H.; Kyung, W. O.; Tae, J. K. Applied Polymer Science 2005, 97, 1326-1332. 66. Jang, J.; Chang, M.; Yoon, H. Advanced Materials 2005, 17, 1616-1620. 67. 謝閔琪; 邱文英. 第三十三屆高分子學會年會 2008. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/37808 | - |
dc.description.abstract | 本研究分為三部分,第一部份為以硝酸鋅和鹼進行水熱法反應製備奈米級的ZnO粒子,並使用不同的鹼和溶劑討論其對ZnO結晶和型態的影響。第二部份利用高溫快速成膜法聚合poly(3,4-Ethylenedioxythiophene)-PEDOT導電高分子薄膜,並討論不同pH值對PEDOT film摻雜程度的影響。第三部份為結合PEDOT和ZnO film,在PEDOT film上生成柱狀ZnO,並討論不同基材和反應條件對PEDOT/ZnO複合薄膜的型態及pH緩衝特性之影響。
在第一部分我們以水熱法合成ZnO奈米顆粒。以FT-IR和XRD鑑定其成分和晶型,並利用SEM觀察其型態。在這部分中我們發現不論是在水和乙醇中皆可製得ZnO,而在乙醇中所得的ZnO粒徑較小,pH緩衝的效果也較好。在第二部分我們以UV吸收峰的位置來判斷酸液和鹼液對PEDOT film摻雜程度的影響。在這部分中我們發現PEDOT film在酸性溶液中摻雜度會增加,而在鹼性溶液中摻雜度則會降低;pH=3-7之溶液會被PEDOT film調控至pH=3,pH=9之溶液則可以被調控至中性。在第三部分則結合PEDOT film和ZnO奈米顆粒。分別以PEDOT或ZnO對基材進行預處理,再以不同的條件長成一維六角柱狀ZnO,我們以SEM觀察其型態,最後再測試其pH緩衝性質。在這部分中我們發現以PEDOT/ZnO film對玻璃或PET不織布預處理之後,可成長出六角柱狀的ZnO,其aspect ratio大約為3;而由pH緩衝測試,我們發現,它對於pH=3-9之溶液皆可被調控到pH=7,因此可說明,這的確是一個對酸和鹼都有緩衝效果的PEDOT/ZnO複合薄膜。 | zh_TW |
dc.description.abstract | This study is devided into three parts. First, by using hydrothermal growth, we use different alkalis to react with Zn(NO3)2 to synthesize ZnO nanoparticles in different solvents(water and ethanol) and discuss the effects on morphology and crystallinity. Second, we synthesize conducting polymer - PEDOT by oxidative polymerization and discuss the effect of solutions with different pH value on the doping level of PEDOT film. Third, we combine PEDOT and ZnO films to synthesize ZnO rods on each film, and discuss the effects of substrates and reaction conditions on the morphology and pH tuning ability of PEDOT/ZnO composite films.
In the first part, we synthesize ZnO nanoparticles by hydrothermal growth method. The composition, crystallinity, and morphology of the ZnO nanoparticles are characterized by Fourier-Transformed Infrared Spectrophotometer(FT-IR), X-Ray Diffractometer(XRD), and Scanning Electron Microscope(SEM), respectively. ZnO particles can be obtained both in water and ethanol, and the paritcle size of ZnO synthesized in ethanol is smaller than that in water. And the pH tuning is better in ethanol than that in water. In the second part, the UV-Vis absorbance peak of PEDOT film is used to determine the doping level of PEDOT film. The doping level of PEDOT film increases when contacting with acid solutions, and decreases when contacting with alkali solutions. PEDOT film can tune solutions from pH=3-7 to pH=3, and pH=9 to pH=7. In the third part, we combine PEDOT and ZnO to synthesize a PEDOT/ZnO composite film. The substrate is first modified with ZnO film, PEDOT film, or both PEDOT and ZnO film. Then one dimensional hexagonal ZnO rods are grown on pre-modified substrates. Morphology of PEDOT/ZnO composite film is observed with SEM and the pH tuning effect is evaluated. After pre-modified by PEDOT/ZnO film on the glass or PET non-woven, ZnO rods of hexagonal structure can be obtained, with aspect ratio of 3. It can tune solutions of pH=3-9 to pH=7. Therefore, the PEDOT/ZnO composite film really works on pH tuning. | en |
dc.description.provenance | Made available in DSpace on 2021-06-13T15:44:53Z (GMT). No. of bitstreams: 1 ntu-97-R95524010-1.pdf: 1915666 bytes, checksum: a2ab67ef25798ad58b08cd67bb165f40 (MD5) Previous issue date: 2008 | en |
dc.description.tableofcontents | 摘 要 I
Abstract II 目 錄 IV 表目錄 VII 圖目錄 VIII 第一章 緒論 1 第二章 文獻回顧 3 2-1 奈米材料 3 2-1-1 奈米材料的基本特性 3 2-1-2 奈米材料之研製 6 2-2 薄膜材料 8 2-2-1 薄膜材料的基本特性 8 2-2-2 薄膜材料之研製 11 2-3 氧化鋅 13 2-3-1 奈米氧化鋅之簡介與應用 13 2-3-2 奈米氧化鋅之研製 15 2-4 PEDOT 18 2-4-1 PEDOT之簡介與應用 19 2-4-2 PEDOT之研製 23 2-5 有機無機奈米複合材料 25 2-5-1有機無機奈米複合材料之簡介與應用 25 2-5-2有機無機奈米複合材料之研製 26 第三章 實驗方法 30 3-1 實驗藥品與儀器 30 3-1-1 實驗藥品 30 3-1-2 實驗儀器 31 3-2 實驗流程 34 3-2-1製備氧化鋅奈米顆粒 35 3-2-2聚合PEDOT 36 3-2-3製備PEDOT/ZnO複合薄膜 37 3-2-4 實驗分析流程圖 38 3-2-4-1 氧化鋅奈米顆粒分析 38 3-2-4-2 PEDOT Film分析 39 3-2-4-3 PEDOT/ZnO複合薄膜分析 40 3-3 合成方法 41 3-3-1製備奈米氧化鋅 41 3-3-2 聚合PEDOT 42 3-3-3製備PEDOT/ZnO複合薄膜 43 3-4 性質測定 45 3-4-1 成分分析- FT-IR 45 3-4-2 晶型分析- XRD 45 3-4-3 光學性質分析- UV-visible spectroscopy 46 3-4-4 形態之觀察- SEM 46 3-4-5 pH值緩衝效果測試- pH meter 46 第四章 結果與討論 47 4-1 合成ZnO奈米顆粒 47 4-1-1 FT-IR之結果與討論 48 4-1-2 XRD之結果與討論 49 4-1-2-1 不同鹼與溶劑之結果與討論 50 4-1-2-2 不同反應溫度之結果與討論 51 4-1-2-3 不同反應時間之結果與討論 53 4-1-3 型態之結果與討論 53 4-1-3-1 不同鹼與不同溶劑之結果與討論 53 4-1-3-2 不同反應溫度之結果與討論 54 4-1-3-3 不同反應時間之結果與討論 54 4-1-4 pH緩衝之結果與討論 55 4-2 聚合PEDOT Film 56 4-2-1 摻雜程度對UV之結果與討論 56 4-2-2 pH緩衝之結果與討論 56 4-3 合成ZnO薄膜 57 4-3-1 不同鹼和不同基材之結果與討論 57 4-3-2 不同鹼和不同濃度之結果與討論 57 4-4 合成PEDOT/ZnO複合薄膜 58 4-4-1 不同基材之結果與討論 59 4-4-1-1以HMTA為鹼在不同方式預處理下之玻璃基材上成長氧化鋅 59 4-4-1-2以HMTA為鹼在不同方式預處理下之PET不織布基材上成長氧化鋅 60 4-4-2 不同濃度之結果與討論 61 4-4-3 不同鹼之結果與討論 62 4-4-4 pH緩衝之結果與討論 63 第五章 結論 64 文獻回顧 66 | |
dc.language.iso | zh-TW | |
dc.title | 具 pH 緩衝之導電功能性 PEDOT/ZnO 奈米複合薄膜之合成及性質研究 | zh_TW |
dc.title | Synthesis and Research of PEDOT/ZnO Nano-Film with Buffering Property | en |
dc.type | Thesis | |
dc.date.schoolyear | 96-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 戴子安(Chi-An Dai),李佳芬(Jia-Fen Li) | |
dc.subject.keyword | 氧化鋅,PEDOT,HMTA,PEDOT/氧化鋅複合薄膜,PET不織布,pH緩衝, | zh_TW |
dc.subject.keyword | ZnO,PEDOT,HMTA,PEDOT/ZnO composite film,PET non-woven,pH tuning, | en |
dc.relation.page | 93 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2008-07-02 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 化學工程學研究所 | zh_TW |
顯示於系所單位: | 化學工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-97-1.pdf 目前未授權公開取用 | 1.87 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。