請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/37558
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 呂良正 | |
dc.contributor.author | Po-Chieh Su | en |
dc.contributor.author | 蘇柏潔 | zh_TW |
dc.date.accessioned | 2021-06-13T15:32:39Z | - |
dc.date.available | 2009-07-16 | |
dc.date.copyright | 2008-07-16 | |
dc.date.issued | 2008 | |
dc.date.submitted | 2008-07-14 | |
dc.identifier.citation | Burgess G. (1994), “Generation of cushion curves from one shock pulse,” Packaging Technology and Science, Vol. 7, 169-173.
Fu, J.-F. (2005), “Research of the possibility to use air-cushion packaging in small household appliances,” Packaging Engineering, No. 5(12). Ge, S.-C. and Shi, Y.-T. (1999), “Study on cushion ing character istics of air bag for rpv recovery,” Journal of Nanjing University of Aeronautics & Astronautics, Vol. 31, No. 4, 458-463. Gruenbaum, G. and Miltz, J. (1983), “Static versus dynamic evaluation of cushioning properties of plastic foams,” Journal of Applied Polymer Science, Vol. 28, 135-143. Heimbs, S., Schmeer, S., Middendorf, P., and Maier, M. (2007), “Strain rate effects in phenolic composites and phenolic-impregnated honeycomb structures,” Composites Science and Technology, Vol. 67, 2827-2837. Liu, G., Song, H.-Y., and Liu, Z.-S. (2005), “The study on performance of air cushion mats,” Packaging and Food Machinery, No.2, 18-20. MIL-HDBK-304C, (1997), Package Cushioning Design, U.S. Dept. of Defense, Washington Sasaki, H., Saito, K., and Abe, K. (1999), “Development of an air cushioning material based on a novel idea,” Packaging Technology and Science, Vol. 12, 143-150. Teragishi, Y., Takada, T., Nakajima, T., and Nogami, R. (1991), “Study of static cushioning properties: automated data input and reliability test of static cushioning properties,” Packaging Technology & Science, Vol. 6, No. 4, 221-233. Wan, Z.-M., Wang, L., Xie, Z.-M., and Du, X.-W. (1998), “Characteristic pressure of airbag,” Mechanics and Engineering, Vol.20, 19-21. Wang, Y. and Low, K.-H. (2004), “Damped response analysis of nonlinear cushion systems by a linearization method,” Computers and Structures, Vol.83, 1584-1594. 中國國家標準CNS 10482 Z6068(1983), “包裝用緩衝材料靜態壓縮試驗方法”, 經濟部中央標準檢驗局. 中國國家標準CNS 10033 Z6061(1993), “包裝貨物之評估試驗法總則”, 經濟部中央標準檢驗局. 中國國家標準CNS 2999 Z6012(1993), “包裝貨物墜落試驗法”, 經濟部中央標準檢驗局. 中國國家標準CNS 13336 K61015(1994), “塑膠薄膜及薄片之抗拉性能試驗法”, 經濟部中央標準檢驗局. 中國國家標準CNS 14634 Z6101(2002), “包裝設計的製品之衝擊強度試驗法”, 經濟部中央標準檢驗局. 中國國家標準CNS 14615 Z6099(2002), “包裝用緩衝材料之特性試驗方法”, 經濟部中央標準檢驗局. 李肇豪(2001),電子裝置衝擊反應:以積分型逐步積分法及有限元素商業軟體為工具,國立台灣大學土木工程學研究所碩士論文。 唐瑢書(2002),壓出型發泡聚乙烯緩衝包材之設計:落下試驗與數值模擬,國立台灣大學土木工程學研究所碩士論文。 王士豪(2003),壓出型發泡聚乙烯緩衝包材之最佳化設計,國立台灣大學土木工程學研究所碩士論文。 江瑞琪(2007),以EPP緩衝包材包覆之液晶單元落下試驗與數值模擬,國立台灣大學土木工程學研究所碩士論文。 柏陞工業股份有限公司網站:http://www.leadpak.com.tw/ | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/37558 | - |
dc.description.abstract | 多數產品由製造到使用者手中,都必須承受某種程度的搬運與輸送,期間必須透過包裝系統以緩和物流期間外界輸入之衝擊力。由於在包裝系統各項評估試驗中,以落下所造成的衝擊最為劇烈,故本研究以氣囊式緩衝包裝系統的落下試驗與數值模擬加入能量損失考量,用以評估緩衝包材之功效,取代傳統試誤法的包裝系統設計方式。
本文旨在透過試驗和數值模擬了解氣囊式緩衝包材在掉落測試實驗中的行為,並用以評估其包裝效果;同時比較不同包材設計條件對掉落衝擊行為的影響,考量不同充氣壓力、氣囊式緩衝包材的管徑變化以及不同的氣囊式緩衝包材薄膜材料所帶來的緩衝效果。文獻上對於包裝系統設計的相關研究多忽略其落下過程中包材的能量損失,以簡化數值分析。但本研究在試驗中發現能量損失具有一定程度之影響,故本文將能量損失的部分一併放入數值模擬中,以加強模擬的準確度。 本文首先針對不同條件的氣囊式緩衝包材進行一系列壓縮試驗,透過材料應力-應變曲線探討氣囊的壓縮特性,以釐清在不同壓縮速率、不同管徑試體下,材料行為是否受到影響。其次,針對不同條件的氣囊式緩衝包材包覆各種不同重量的壓克力板及鋼板,利用落下試驗機進行簡易落下實驗,了解不同條件下的氣囊式緩衝包材所適用的重物重量及其緩衝效果,此外,利用高速攝影機觀察反彈情形,探討能量損失。 再者,希望分別透過靜態評估方法與單自由度運動方程式及動態緩衝曲線,加入能量損失考量,來預測包裝物在落下時的最大加速度。最後,由各種試驗及數值模擬結果,歸納出利於選用包材的方式及便於使用的圖表。 | zh_TW |
dc.description.abstract | This study hopes to understand the behavior of air cushion bag in drop test and to assess the cushioning effect of packaging through test and numerical simulation. Furthermore, we will compare the influence on the different conditions of bag material in drop test, considering different inside pressures, diameters of bag’s tube, and also various packaging way.
First, we plan to carry out a series of static compression test on the air cushion bags with different conditions, and to use the stress-strain curve to know the constitutive law of air cushion bag. By static compression test, we can recognize the compression rate effect and realize the relation between diameters of air bag tube and material constitutive law. Second, in order to understand the applicable object weight of air cushion bag under different conditions, we will try to use the drop test on simple steel plate to know the acceleration response in each case. In addition, we would like to make use of motion function, which is single degree of freedom, to forecast the maximum acceleration on the object when dropping; in the meantime, through observing the jump height after package contact to the floor to judge that there must have some energy dissipations when package dropping. In the end, we consider the energy dissipation in numerical methods and produce some formulas and charts to forecast the maximum acceleration. After that, concluding the design procedure of air cushion bag system. | en |
dc.description.provenance | Made available in DSpace on 2021-06-13T15:32:39Z (GMT). No. of bitstreams: 1 ntu-97-R95521209-1.pdf: 7036959 bytes, checksum: e2b4b07bd6ff29e87eef328da17850f3 (MD5) Previous issue date: 2008 | en |
dc.description.tableofcontents | 摘要 I
表目錄 IX 圖目錄 XIII 第一章 緒論 1 1.1 研究動機及目的 1 1.2 文獻回顧 2 1.3 各章內容 4 第二章 氣囊式緩衝包裝系統 7 2.1 簡介 7 2.2 氣囊式緩衝包裝系統構造 8 2.2.1 氣囊式緩衝包裝系統之特性 8 2.2.2 氣囊式緩衝包裝系統之製程 9 2.2.2.1 薄膜材料 9 2.2.2.2 應用規格 10 2.2.2.3 包裝使用流程 10 2.3 可充氣複合薄膜測試 11 2.3.1 張力試驗 11 2.3.1.1 試驗規範 11 2.3.1.2 試驗試片 11 2.3.1.3 試驗設備 12 2.3.1.4 試驗流程 12 2.3.1.5 試驗結果 13 2.3.2 充氣壓力與薄膜應力 13 2.3.3 充氣壓力下降測試 15 2.4 小結 16 第三章 緩衝包材靜態壓縮試驗 27 3.1 簡介 27 3.2 靜態壓縮試驗 27 3.2.1 試驗規範 28 3.2.2 試驗設備 28 3.2.3 試驗流程 30 3.2.4 試驗數據分析 31 3.3 靜態壓縮試驗結果 32 3.3.1 不同試片充氣壓力結果比較 32 3.3.2 不同試片面積結果比較 33 3.3.3 不同壓縮速率結果比較 34 3.3.4 不同試片管徑結果比較 34 3.4 小結 35 第四章 簡易落下試驗 53 4.1 簡介 53 4.2 試驗設備及其使用方式 54 4.2.1 氣臂式自由落下試驗機 54 4.2.2 密蠟(Petro-wax)及其使用方式 54 4.2.3 訊號擷取系統 55 4.2.4 壓電式加速度規 55 4.2.5 待測物 55 4.2.6 攝影設備及燈光設備 56 4.3 簡易落下試驗方法 57 4.4 濾波原理及濾波截止頻率 58 4.5 落下試驗結果:沒加紙箱 59 4.5.1 試驗後氣柱壓力 59 4.5.2 試驗結果:不同充氣壓力 60 4.5.3 試驗結果:不同管徑、不同重量及不同落下高度 60 4.5.4 試驗結果:不同面積 62 4.5.5 試驗結果:高速攝影機觀察之反彈高度 62 4.5.6 試驗結果:高速攝影機觀察之壓縮量 62 4.6 落下試驗結果:外加紙箱 63 4.7 小結 64 第五章 簡易落下試驗數值模擬 113 5.1 簡介 113 5.2 靜態評估曲線 114 5.2.1 靜態緩衝曲線 114 5.2.2 靜態緩衝評估方法及結果 116 5.3 單自由度非線性彈簧系統 117 5.3.1 內隱式Newmark積分法 118 5.3.2 不平衡力迭代法 120 5.3.3 結果與討論 121 5.4 動態緩衝曲線 122 5.4.1 動態緩衝曲線及結果 122 5.4.2 透過應力-應變曲線得單位體積應變能-應力曲線 124 5.4.2.1 以能量觀點得緩衝曲線 124 5.4.2.2 以數值方法得緩衝曲線 126 5.5 能量損失及評估方法 127 5.5.1 數值模擬中重力之影響 127 5.5.2 能量損失型式與加速度反應 129 5.5.2.1 速度型能量損失 131 5.5.2.2 摩擦型能量損失 132 5.5.3 氣囊式緩衝包裝系統之能量損失 133 5.5.4 能量損失評估應用於最大加速度值之預測 133 5.5.5 等價高度 135 5.5.6 能量損失評估應用範例 136 5.6 小結 139 第六章 氣囊式緩衝包裝系統設計流程及設計實例 175 6.1 設計流程 175 6.2 設計範例 177 6.2.1 筆記型電腦 177 6.2.2 脆盤 178 6.2.3 19吋液晶螢幕 179 6.3 小結 179 第七章 結論與展望 191 7.1 結論 191 7.2 未來展望 193 參考文獻 195 | |
dc.language.iso | zh-TW | |
dc.title | 氣囊式緩衝包裝系統之分析與設計 | zh_TW |
dc.title | Analysis and Design of Air Cushion Bag Packaging System | en |
dc.type | Thesis | |
dc.date.schoolyear | 96-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 郭世榮,宋裕?,黃仲偉 | |
dc.subject.keyword | 氣囊,緩衝包裝,落下試驗,壓縮試驗,數值模擬,能量損失, | zh_TW |
dc.subject.keyword | air bag,cushion package,drop test,compression test,numerical simulation,energy dissipation, | en |
dc.relation.page | 197 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2008-07-14 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 土木工程學研究所 | zh_TW |
顯示於系所單位: | 土木工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-97-1.pdf 目前未授權公開取用 | 6.87 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。