請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/36061
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 韋文誠 | |
dc.contributor.author | Lin Chung Chieh | en |
dc.contributor.author | 林浚傑 | zh_TW |
dc.date.accessioned | 2021-06-13T07:50:35Z | - |
dc.date.available | 2005-07-29 | |
dc.date.copyright | 2005-07-29 | |
dc.date.issued | 2005 | |
dc.date.submitted | 2005-07-26 | |
dc.identifier.citation | [1] I.-W. Chen and X.–H. Wang, “Sintering dense nanocrystalline ceramics without final-stage grain growth.” Nature (London), 404, 168-71 (2000)
[2] M. German, Sintering theory and practice, Ch. 8, Wiley-Interscience Publication, USA (1996) [3] H. C. Kao and W. C. Wei, ” Kinetics and microstructure evolution of heterogeneous transformation of θ-alumina to α-alumina,” J. Am. Ceram. Soc., 83[2] 362-68 (2000) [4] 韋文誠,鄭誠功,關永武,陶瓷人工髖關節球頭之發展與評估,科學月刊, 9 (27), 1999 [5] 黃啟祥,林江財,氧化鋁,Ch.20,683-715,陶瓷技術手冊,中華民國粉末冶金協會出版,中華民國83年7月 [6] 王博祺,氧化鋁膠粒製成最佳化及機械性質之研究,國立台灣大學材料科學與工程研究所碩士論文,中華民國88年7月 [7] R. Morrell, Handbook of properties of technical and engineering ceramics, Part 2:data reviews, section 1: high alumina ceramics, National Physical Laboratory, HMSO, London, 1987 [8] D. Munz and T. Fett, Ceramics – mechanical properties, failure behavior, materials selection, Springer, 16, 2001 [9] R. F. Cook, B. R. Lawn, and C. J. Fairbands, “Microstructure-strength properties in ceramics: I, effect of crack size on toughness,” J. Am. Ceram. Soc., 68 [11] 604-615 (1985) [10] E. Ryshkewitch, “Compression strength of porous sintered alumina and zirconia,” J. Am. Ceram. Soc., 30 [2] 65-68 (1982) [11] J. Wang, W. M. Rainforth, I. Wadsworth, and R. Stevens, “The effect of notch width on the SENB toughness for oxide ceramics,” J. Europ. Ceram. Soc., 10, 21-31, 1992 [12] D. E. Garcia, J. Seidel, R. Janssen and N. Caussen, “Fast firing of alumina,” J. Europ. Ceram. Soc., 15, 935-938 (1995) [13] F. J. T. Lin and L. C. De Jonghe, “Initial coarsening and microstructural evolution of fast-fired and MgO-doped Al2O3,” J. Am. Ceram. Soc., 8 [11] 2891-96 (1997) [14] 林江財,燒結實務,Ch. 5,110-145,陶瓷技術手冊,中華民國粉末冶金協會出版,中華民國83年7月 [15] 黃盈翔,不同鈦含量的活性硬銲填料/氧化鋁基本紅外線快速加熱動態潤行為研究,國立台灣大學材料科學與工程研究所碩士論文,中華民國93年6月 [16] D. L. Johnson and J. S. Kim, “Ultra-rapid sintering of ceramic,” Material science monographs, Volume 14, 573-578 (1982) [17] S. H. Risbud, C.-H. Shan, A. K. Mukherjee., M. J. Kim, J. S. Bow, and R. A. Holl, “Retention of nanostructure in aluminum oxide by very rapid sintering at 1150,” J. Mater. Res., ℃10, [2], 237-239 (1995) [18] X. Zhipeng, H. Young, and W. Su, “Microwave sintering of zirconia toughened alumina ceramics,” J. Chin. Soc., 23(1) 7-13 (1995) [19] J. Cheng., D. Agrawal., Y. Zhang., B. Draw., and R. Roy, “Fabricating transparent ceramics by microwave sintering,” Am. Ceram. Soc. Bull., 79, [9], 71-74 (2000) [20] D. D. Jayaseelan, N. Kondo, D. A. Rani, S. Ueno, T. Ohji, and S. Kanzaki, “Pulse electric current sintering of Al2O3/ 3vol% ZrO2 with constrained grains and high strength,” J. Am. Ceram. Soc., 85 [11] 2870-2872 (2002) [21] Z. Shen, M. John, Z. Zhao, and M. Nygren, “Spark plasma sintering of alumina,” J. Am. Ceram. Soc., 85 [8] 1921-1927 (2002) [22] Y. Zhou, K. Hirao, Y. Yamauchi, and S. Kanzaki, “Effect of heating rate and particle, ” Scripta Materialia , 48, 1631-1636 (2003) [23] Y. Zhou, K. Hirao, Y. Yamauchi, and S. Kanzaki, ”Densification and grain growth in pulse electric current sintering of alumina,” J. Europ. Ceram. Soc., 24, 3465-3470 (2004) [24] F. J. T. Lin, L. C. De Jonghe, and M. N. Rahaman, “Microstructure refinement of sintered alumina by a two-step sintering technique.” J. Am. Ceram. Soc., 80, 2269-77 (1997) [25] W. D. Kingery and M. Berg, “Study of the initial stages of sintering solids by viscous flow, evaporation-condensation, and self-diffusion ,” J. Appl. Phys. 26, 1205-1212, (1955) [26] Y. Oishi and W. D. Kingery, ”Self-diffusion of oxygen in crystal and polycrystalline aluminum oxide,” J. Chem. Phys. 33,480-486, (1959) [27] R. L. Coble, ”Sintering crystalline solids. II. Experimental test of diffusion models in powder compact,” J. Appl. Phys. 32, 793-799, (1961) [28] R. L. Coble, “Sintering crystalline solids. I. Intermediate and final stage diffusion models,” J. Appl. Phys. 32, 787-792, (1961) [29] A. E. Paladino and W. D. Kingery, “Alumina ion diffusion in aluminum oxide,” J. Chem. Phys. 37,957-962, (1962) [30] D. L. Johnson and I. B. Cutler, “Diffusion sintering: I, Initial state sintering models and their application to shrinkage of powder compacts,” J. Am. Ceram. Soc., 46 [11], 541-544 (1963) [31] D. L. Johnson and I. B. Cutler, “Diffusion sintering: II., Initial sintering kinetics of alumina,” J. Am. Ceram. Soc., 46 [11], 545-550 (1963) [32] J. G. Li and X. Sun, “Synthesis and sintering behavior of a nanocrystalline α-alumina powder,” Acta Mater, 48, 3103-3112, (2002) [33] R. L. Coble, “Initial sintering of alumina and hematite,” J. Am. Ceram. Soc., 41 [2], 55-62 (1958) [34] M. J. Bannister, ”Shape sensitivity of initial sintering equations,” J. Am. Ceram. Soc., 51 [10], 548-553 (1968) [35] S. H. Hillman and R. M. German, “Constant heating rate analysis of simultaneous sintering mechanisms in alumina,” J. Mater. Sci, 17, 2641-2648, (1992) [36] W. S. Young and I. B. Cutler, “Initial sintering with constant rate of heating,” J. Am. Ceram. Soc., 53 [12], 659-663 (1970) [37] T. S. Z., P. Hing, and H. Huang, “Early stage sintering mechanisms of Fe-Doped CeO2,” J. Mater. Sci, 37, 997-1003, (2002) [38] W. Zeng, L.Gao, L.Gui, and J. Guo, “Sintering kinetics of α-Al2O3 powder,” Ceram. Inter. 25, 723-726, (1999) [39] M. P. Harmer and R. J. Brook, “The effectof MgO additions on the kinetics of hot pressing in Al2O3,” J. Mater. Sci, 15, 3017-3024, (1980) [40] J. L. Woolfrey and M. J. Bannister, J. Am. Ceram. Soc.,55, 390 (1972) [41] R. M. German, “Surface area reduction during isothermal sintering,” J. Am. Ceram. Soc.,59, 379-383 (1976) [42] M. N. Rahaman, Ceramic processing and sintering, Marcel Dekker, Inc., New york (2003) [43] T. S. Zhang, J. Ma, L.B. Kong, Z. Q. Zeng, P. Hing, and J.A. Kilner, “Final-stage sintering behavior of Fe-Doped CeO2,” Mater. Sci. Eng. B103, 177-183, (2003) [44] Z. He and J. Ma, “Constitutive modeling of densification and grain growth of fine-grained alumina ceramics,” Mater. Sci. Eng. A361, 130-135, (2003) [45] R. Voytovych, I. MacLaren, M. A. Gulgun, R. M. Cannon, and M, Ruhle, “The effect of yttrium on densification and grain growth in α-alumina,” Acta Materialia, 50, 3453-3463, (2002) [46] F. F. Lange, and M. M. Hirlinger, “Hindrance of grain growth in Al2O3 by ZrO2 inclusions,” J. Am. Ceram. Soc.,67 [3], 164-168 (1984) [47] F. F. Lange, T. Yamaguchi, B. I. Davis, and P. E. D. Morgen, “Effect of ZrO2 inclusions on the sinterability of Al2O3,” J. Am. Ceram. Soc., 71 [6], 446-448 (1988) [48] J. Wang and R. Raj, “Estimate of the activation energy for boundary diffusion from rate-controlled sintering of pure alumina, and alumina doped with zirconia or titania,” J. Am. Ceram. Soc.,73 [5], 1172-1175 (1990) [49] J. Wang and R. Raj, “Activation energy for the sintering of two-phase alumina/zirconia ceramics,” J. Am. Ceram. Soc.,74 [8], 1959-1963 (1991) [50] A. E. Paladino and R. L. Coble, “Effect of grain boundary on diffusion –controlled processes in aluminum oxide,” J. Am. Ceram. Soc.,46 [3], 133-136 (1963) [51] T. T. Fang and H. Palmour III, “Evolution of pore morphology in sintering powder compacts,” Ceram. Inter. 16, 1-10, (1990) [52] 吳朗&唐敏注,陶瓷材料的物理和化學特性及其檢測,Ch.8,224-275,陶瓷技術手冊,中華民國粉末冶金協會出版,中華民國83年7月 [53] Kingery, Bowen, and Uhlmann, Introduction to ceramic, Ch.12,曉園出版社,(1992) [54] S.W. Wang and L.D. Chen, “Formation of Al2O3 grains with different sizes and morphologies during the pulse electric current sintering process,” J. Mater. Res., 16, [12], Dec 2001 [55] R. Z. Chen and W. H. Tuan, “Thermal etching of alumina,” Am. Ceram. Soc. Bulletin., 83-86 (2000) [56] T. S. Owate and R. Freer, “Thermochemical etching method for ceramics,” J. Am. Ceram. Soc.,75 [5] 1266-68 (1992) [57] 黃坤祥,粉末冶金學,中華民國粉末冶金協會, 中華民國92年9月 [58] 陳夢霞,主導燒結曲線模型運用在奈米氧化鋁和奈米氧化鈦陶瓷粉末燒結之研究,國立台灣大學地質科學研究所碩士論文,中華民國93年6月 [59] P. L. Chen anf I. W. Chen, “Sintering of fine oxide powders: II, sintering mechanisms,” J. Am. Ceram. Soc., 80 [3] 637-45 (1997) [60] Y. M. Chiang, D. P. Birnie,III, and W. D. Kingery, Physical ceramics, Ch.5., John Wiley & Sons, Inc., Canada, (1997) | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/36061 | - |
dc.description.abstract | 摘要
本研究主要是利用兩批不同粒徑的α-Al2O3 (slurry A-0.2 μm 及slurry B-0.1μm),進行不同的燒結熱處理方式,並對其燒結結果進行研究。所嘗試的燒結方式包括兩階段燒結,升溫速率的改變,以及傳統升溫步驟。藉由不同參數的設計,包含改變第一階段溫度,第二階段持溫溫度,升溫速率...等,來進行微結構,燒結密度,晶粒大小的觀察與分析。此外,TMA 被用來分析在不同升溫速率下(2 到 90 oC/min),上述 α-Al2O3 的緻密化行為。而紅外線快速加熱爐亦被用來研究氧化鋁對於紅外線之吸收效應。 就兩階段燒結的結果來說,比起傳統單一步驟燒結,slurry A 可獲得較高的燒結密度以及小的粒徑(0.86μm),此燒結條件10oC/min,升溫到 1500 oC,爐冷後,溫度降到1300oC,持溫20 個小時。另外一個樣品,升溫到1450 oC 並於1300 持溫20 小時,所得到的燒結密度約98%TD,晶粒尺寸約0.57μm。 不同升溫速率確實對燒結行為有所影響,slurry B 的樣品隨著加熱速率增加,其密度跟著變小,但是晶粒卻無明顯差異。結果顯示,當加熱速度增加,初始燒結溫度增加; 最大收縮速率所對應的溫度也是隨之增加。利用Young 與Cutler [36]等人的分析法快速升溫的燒結機制為體擴散,活化能值為688kJ/mole,非常接近鋁離子在多晶的擴散。 | zh_TW |
dc.description.abstract | Abstract
In this research, sintering behavior of two α-Al2O3 powders with average particle size 0.1μm (Slurry B) and 0.2 μm (Slurry A) were investigated. Several heating processes were tried. One followed a two-step sintering method given by Chen and Wang [1], The effects of temperature, holding time, initial grain size and porosity were controlled. Various thermal treatments were also done comparing to the conventional (one-step) process. Secondly, TMA was used to analyze the sintering behaviors of the α-Al2O3 at various heating rates, from 2 to 90 oC/min. Finally, an infra-red fast sintering furnace was designed and used to study the heating effect on the fine α- Al2O3. A high density (>99% T.D.) and small average grain size (0.86 μm) were achieved by the two-step sintering of Al2O3 and better than the results by the conventional sintering (1500 oC for 1 h). The other case, sintered Al2O3 – B samples, in a smaller grain size (0.57μm) and a good density (>98% T.D.) were achieved by heating to 1450 oC, then holding at 1350 oC for 20 h. Lower first-step temperature and second-step temperature than the temperatures of sample – A were noted. Different sintering rates indeed influence the sintered densities, e.g. the results of Al2O3 – B, but no influence on the average grain size. The results showed, while the sintering rate increased from 2 oC /min to 90 oC /min, the sintered density decreased from full density to 97%TD if heating to 1500oC then holding for 1 h. For both cases, the initial sintering temperature increased with the heating rate, due to the limitation of heat transfer in Al2O3 samples. Maximum shrinkage rate and the corresponding temperature increased with the heating rate, too. The sintering mechanism of rapid-heating rate has been determined by Young and Cutler [36]. The mechanism of initial sintering belongs to a lattice diffusion, and the activation energy is 688 kJ/mole, which is interpreted as a volume diffusion of Al3+ ions in polycrystalline matrix. | en |
dc.description.provenance | Made available in DSpace on 2021-06-13T07:50:35Z (GMT). No. of bitstreams: 1 ntu-94-R92527039-1.pdf: 12626049 bytes, checksum: 99dfa907370e810e811b24a4a2d264f6 (MD5) Previous issue date: 2005 | en |
dc.description.tableofcontents | Content
Chapter 1 Introduction…………………………………………….1 Chapter 2 Literature Review…………………………………….4 2.1 Introduction to alumina……………………………………..4 2.1.1 Characteristics and applications ..…………4 2.1.2 Process-Microstructure-Properties…………..5 2.2 Densification of alumina ……………..…………...9 2.2.1 Methods of fast sintering……………………..9 2.2.2 Fast sintering……………………………………14 2.2.3 Two-step sintering………………………………16 2.3 Sintering of Al2O3…………………………………….18 2.3.1 Sintering mechanism……………………..…….18 2.3.2 Gain growth………………………………………………….23 2.3.3 Effect of doping…………………………….….24 2.3.4 Effect of thermal transferring………………25 Chapter 3 Experimental Procedure…………………………….28 3.1 Experimental planning…………………………………28 3.2 Materials…………………………………………………28 3.3 Preparation of specimen…………………….……….28 3.4 Thermal treatment………………………............30 3.5 Characterization………………………..…………….30 Chapter 4 Results and Discussion………………………..…..39 4.1 Two-step sintering………………………………………....39 4.1.1 Green density and thermal analysis……………………39 4.1.2 sintering density and grain size………………………42 4.2 Fast sintering…………………………………………………51 4.2.1 Comparison between die pressed and pressure casting samples….........................................51 4.2.2 Heating rate…………………………………………………59 4.2.3 Infra-red heating………………………………………….65 4.3 Sintering kinetics…………………………………….70 4.3.1 Diffusion path…………………………………..70 4.3.2 Activation energy of densification or grain growth…………………......................73 4.3.3 Thickness effect…………………………………76 Chapter 5 Conclusions……………………………………………….........78 Reference…………………………………………………………….80 Appendix多孔性氧化鋁陶瓷濾材之製程與特性之研究…………..84 | |
dc.language.iso | en | |
dc.title | α-Al2O3 兩階段燒結緻密化之製程研究 | zh_TW |
dc.title | Study on Two-Step Sintering of α-Al2O3 | en |
dc.type | Thesis | |
dc.date.schoolyear | 93-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 黃坤祥,黃啟原 | |
dc.subject.keyword | 兩階段燒結,加熱速度,粒徑,燒結機制,燒結密度,紅外線快速加熱, | zh_TW |
dc.subject.keyword | two-step sintering,heating rate,grain size,sintering mecha-nism,sintered density,Infra-red fast sintering, | en |
dc.relation.page | 101 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2005-07-26 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-94-1.pdf 目前未授權公開取用 | 12.33 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。