請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/35401
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 李君浩 | |
dc.contributor.author | Meng-Hsiu Wu | en |
dc.contributor.author | 吳孟修 | zh_TW |
dc.date.accessioned | 2021-06-13T06:51:14Z | - |
dc.date.available | 2005-08-01 | |
dc.date.copyright | 2005-08-01 | |
dc.date.issued | 2005 | |
dc.date.submitted | 2005-07-28 | |
dc.identifier.citation | [1.1] C. W. Tang, and S. A. VanSlyke, “Organic electroluminescent diodes,” Appl. Phys. Lett. 51, 913 (1987).
[1.2] C. W. Tang, and S. A. Vanslyke, “Electroluminescence of doped organic thin films,” J. Appl. Phys. 65, 3610 (1989). [1.3] L. S. Hung, and C. H. Chen, “Recent progress of molecular organic electroluminescent materials and devices,” Materials Science and Engineering R 39, 143 (2002). [1.4] L. S. Liao, K. P. Klubek, and C. W. Tang, “High-efficiency tandem organic light-emitting diodes,” Appl. Phys. Lett. 84, 167 (2004). [1.5] P. E. Burrows, S. R. Forrest, T. X. Zhou and L. Michalski “Operating lifetime of phosphorescent organic light emitting devices,” Appl. Phys. Lett. 76, 2493 (2000). [1.6] W. Brutting, S. Berleb, and A. G. Muckl, “Device physics of organic light emitting diodes based on molecular materials,” Org. Electron. 2, 1 (2001). [1.7] I. D. Parker “Carrier tunneling and device characteristics in polymer light-emitting diodes,” J. Appl. Phys. 75, 1656 (1994). [1.8] M. A. Baldo and S. R. Forrest “Interface-limited injection in amorphous organic semiconductors,” Phys. Rev. B 64, 085201 (2001). [1.9] A. J. Campbell, D. C. Bradley, J. Laubender, and M.Sokolowski, “Thermally activated injection limited conduction in single layer N,N -diphenyl-N,N -bis(3-methylphenyl)1-1 -biphenyl-4,4 -diamine light emitting diodes,” J. Appl. Phys. 86, 5004 (1999). [1.10] T. Yasuda, Y. Yamaguchi, D. C. Zou and T. Tsutsui “Carrier mobilities in organic electron transport materials determined from space charge limited current,” Jpn. J. Appl. Phys. Part 1 41, 5626 (2002) [1.11] C. Hosokawa, H. Tokailin, H. Higashi, and T. Kusumoto “Transient behavior of organic thin film electroluminescence,” Appl. Phys. Lett. 60, 1220 (1992) [1.12] T. Yamada, F. Rohlfing, T. Tsutsui, “Distribution of Average Electric Field in tris-(8-hydroxyquinoline)aluminum and 4,4′-bis [N-(1-naphthyl)-N-phenylamino]-biphenyl-based Double-Layer Light-Emitting Diodes,” Jpn. J. Appl. Phys. 39, 1382 (2000). [1.13] T. M. Brown, R. H. Friend, I. S. Millard, D. J. Lacey, T. Butler, J. H. Burroughes, and F. Cacialli,” Electronic line-up in light-emitting diodes with alkali-halideometal cathodes,” J. Appl. Phys. 93, 6159 (2003). [1.14] T. Yokoyama, D. Yoshimura, E. Ito, H. Ishii, Y. Ouchi, and K. Seki, “Energy Level Alignment at Alq3/LiF/Al Interfaces Studied by Electron Spectroscopies: Island Growth of LiF and Size-Dependence of the Electronic Structures,” Jpn. J. Appl. Phys. Part 1 42, 3666 (2003). [1.15] M. Fujihira and C. Ganzorig, Mater. “Improvement in electron and hole injection at electrodes and in recombination at a two-organic-layer interface,” Mater. Sci. Eng. B 85, 203 (2001). [1.16] C. Ganzorig and M. Fujihira, “A Lithium Carboxylate Ultrathin Film on an Aluminum Cathode for Enhanced Electron Injection in Organic Electroluminescent Devices,” Jpn. J. Appl. Phys. Part 2 38, L1348 (1999). [1.17] S. E. Shaheen, G. E. Jabbour, M. M. Morrell, Y. Kawabe, B. Kippelen, N. eyghambarian, M. F. Nabor, R. Schlaf, E. A. Mash, and N. R. Armstrong, “Bright blue organic light-emitting diode with improved color purity using a LiF/Al cathode,” J. Appl. Phys. 84, 2324 (1998). [1.18] C. Ganzorig, K. Suga, and M. Fujihira, “Alkali metal acetates as effective electron injection layers for organic electroluminescent devices,” Mater. Sci. Eng. B 85, 140 (2001). [1.19] Q. T. Le, L. Yan, Y. Gao, M. G. Mason, D. J. Giesen, and C. W. Tang, “Photoemission study of aluminum/tris-(8-hydroxyquinoline) Aluminum and aluminum/LiF/tris-(8-hydroxyquinoline) aluminum interfaces,” J. Appl. Phys. 87, 375 (2000). [1.20] M. G. Mason, C. W. Tang, L. S. Hung, P. Raychaudhuri, J. Madathil, D. J. Giesen, L. Yan, Q. T. Le, Y. Gao, S. T. Lee, L. S. Liao, L. F. Cheng, W. R. Salaneck, D. A. dos Santos, and J. L. Bredas, “Interfacial chemistry of Alq3 and LiF with reactive metals,” J. Appl. Phys. 89, 2756 (2001). [1.21] H. Heil, J. Steiger, S. Karg, M. Gastel, H. Ortner, H. von Seggern, and M. Stobel, “Mechanisms of injection enhancement in organic light-emitting diodes through an Al/LiF electrode,” J. Appl. Phys. 89, 420 (2001). [1.22] D. Grozea, A. Turak, X. D. Feng, Z. H. Lu, D. Johnson, and R. Wood, “Chemical structure of Al/LiF/Alq3 interfaces in organic light-emitting diodes,” Appl. Phys. Lett. 81, 3173 (2002). [1.23] J. Kido, and T. Matsumoto, “Bright organic electroluminescent devices having a metal-doped electron-injecting layer,” Appl. Phys. Lett. 73, 2866 (1998). [1.24] C. Ganzorig and M. Fujihira, “Improved drive voltages of organic electroluminescent devices with an efficient p-type aromatic diamine hole-injection layer,” Appl. Phys. Lett. 77, 4211 (2000). [1.25] G. Parthasarathy, C. Shen, A. Kahn, and S. R. Forrest, “Lithium doping of semiconducting organic charge transport materials,” J. Appl. Phys. 89, 4986 (2001). [1.26] B. W. D’Andrade, S. R. Forrest, and A. B. Chwang, “Operational stability of electrophosphorescent devices containing p and n doped transport layers,” Appl. Phys. Lett. 83, 3858 (2003). [1.27] P. Piromreun, H. S. Oh, Y. Shen, G. G. Malliaras, J. C. Scott, and P. J. Brock, “Role of CsF on electron injection into a conjugated polymer,” Appl. Phys. Lett. 77, 2403 (2000). [1.28] C. H. Chen, C. W. Tang, J. Shi, and K. P. Klubek, “Recent developments in the synthesis of red dopants for Alq3 hosted electroluminescence,” Thin Solid Films 363, 327 (2000) [1.29] L. C. Picciolo, H. Murata, and Z. H. Kafafi “Organic light-emitting devices with saturated red emission using 6,13-diphenylpentacene,” Appl. Phys. Lett. 78, 2378 (2001). [1.30] D. F. O'Brien M. A. Baldo M. E. Thompson and S. R. Forrest “Improved energy transfer in electrophosphorescent devices,” Appl. Phys. Lett. 74, 442 (1999). [1.31] C. Adachi, M. A. Baldo, and S. R. Forrest “Electroluminescence mechanisms in organic light emitting devices employing a europium chelate doped in a wide energy gap bipolar conducting host,” J. Appl. Phys. 87, 8049 (2000). [1.32] Chihaya Adachi, Marc A. Baldo Stephen R. Forrest Sergey Lamansky Mark E. Thompson, and Raymond C. Kwong “High-efficiency red electrophosphorescence devices,” Appl. Phys. Lett. 78, 1622 (2001). [1.33] H. Liu, W. Gao, K. Yang, B. Chen, S. Liu, and Y. Bai “Effect of rubrene on characteristic of red organic electroluminescent device doped with rubrene,” Chem. Phys. Lett. 352, 353 (2002). [1.34] M. E. Thompson, A. Shoustikov, Y. You, P. E. Burrows, and S. R. Forrest “Orange and red organic light-emitting devices using aluminum tris(5-hydroxyquinoxaline), ” Synth. Met. 91, 217 (1997). [1.35] Z. Y. Xie, L. S. Hung, and S. T. Lee “High-efficiency red electroluminescence from a narrow recombination zone confined by an organic double heterostructure,” Appl. Phys. Lett. 79, 1048 (2001). [1.36] T. H. Liu, C. Y. Iou, and C. H. Chen, “Doped red organic electroluminescent devices based on a cohost emitter system” Appl. Phys. Lett. 83, 5241 (2003). [1.37] R. H. Young C. W. Tang and A. P. Marchetti “Current-induced fluorescence quenching in organic light-emitting diodes,” Appl. Phys. Lett. 80, 874 (2002). [1.38] H. Terri, C. Arabinda, H. Y. Ralph, R. L.Jerome, P. M. Alfred, and J. R. Lewis “Charge-Induced Luminescence Quenching in Organic Light-Emitting Diodes,” Chem. Mater. 16, 4675 (2004). [1.39] R.C. Kwong, M.R. Nugent, L. Michalski, T. Ngo, K. Rajan, Y.-J. Tung, M.S. Weaver, T.X. Zhou, M. Hack, M.E. Thompson, S.R. Forrest, J.J. Brown, “High operational stability of electrophosphorescent devices,” Appl. Phys. Lett. 81, 162 (2002). [2.1] Y. Qiu, Y. Gao, P. Wei and L. Wang,” Organic light-emitting diodes with improved hole-electron balance by using copper phthalocyanine aromatic diamine multiple quantum wells,” Appl. Phys. Lett. 80, 2628 (2002) [3.1] 張進傳 '二苯胺代苯螢光化合物之光電性質探討 '碩士論文 (2004) [3.2] R. G. Kepler, P. M. Beeson, S. J. Jacobs, R. A. Anderson, M. B. Sinclair, V. S. Valencia, and P. A. Cahill, “Electron and hole mobility in tris(8-hydroxyquinolinolato-N1,O8) aluminum,” Appl. Phys. Lett. 66 3618 (1995) | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/35401 | - |
dc.description.abstract | 在本篇論文中,吾人使用銫原子與一新有機材料(Bis-OXD)共蒸鍍,形成金屬摻雜之電子傳導層,並製作成有機電激發光元件。由於銫是高原子量的鹼金族元素,不容易於有機層中擴散,所以在長期的工作下,較不亦產生淬熄現象。此外,該有機材料具有攝氏147度的高玻璃轉換溫度,有助於提升元件壽命。且其薄膜的平均表面粗糙度甚小,因此製成有機發光顯示器時,具備極低之漏電流。配合使用高反射和高導電的銀電極後,元件之驅動電壓減少2.59伏特,電流效率提高了47.3%和工作壽命提高3.14倍。
此外,我們使用一個新的紅色有機材料製作有機電激發光元件。與典型的紅色染料比較,在相同濃度下,利用此新材料製成之元件具備較高的顏色純度。此外,在元件中並未觀察到電流引發螢光淬熄之現象。由於此紅色材料具備電洞傳導之特性,於發光層及電子注入層間加上一層電洞阻擋層,可提升六倍之元件效率。 | zh_TW |
dc.description.abstract | In this thesis, the OLED performance of novel cesium (Cs) doped 4,4'-bis(5-phenyl-[1,3,4]oxadiazol-2-yl)-2,2'-dinaphthylbiphenyl (bis-OXD), a metal-doped electron transport layer (MD-ETL), is reported herein. Cs is a heavy alkali atom and difficult to diffuse in an organic matrix. The metal quenching effect is therefore reduced in a long-term operation. The host material, bis-OXD, exhibits a high glass transition temperature (Tg) of 147 oC. The average roughness of the thin film is small when compared with other derivatives. The leakage current of the corresponding OLED devices is low. By using a highly reflective and conductive silver cathode, an OLED with a 2.59 V reduction in driving voltage, a 47.3% increase in current efficiency, and a 3.14 times enhancement in operation lifetime was demonstrated.
We use a new red dye organic material to fabricate an OLED. Such a device exhibits a higher color-purity as compared with that with the conventional red dopant material, 4-(dicyanomethylene)-2-tert-butyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran (DCJTB), under the same doping concentration. There is no current-induced fluorescence quenching on the electroluminance of the device with this red dopant material. The current efficiency of the red device can be improved by six times with insertion of a hole blocking layer between the emitting layer and electron transport layer. | en |
dc.description.provenance | Made available in DSpace on 2021-06-13T06:51:14Z (GMT). No. of bitstreams: 1 ntu-94-R92941035-1.pdf: 1016554 bytes, checksum: 5e699a41b3f7f8ef28c0bcde3aa4d430 (MD5) Previous issue date: 2005 | en |
dc.description.tableofcontents | Contents
Chapter 1 Introduction 1 1.1 Introduction of OLED 3 1.2 Charge Injection from the Cathode to the N-type Organic Thin-Films 7 1.3 Metal-Dopant Layer as an ETL 9 1.4 Red Doped Materials of OLED 12 1.5 Motivation 13 1.6 Thesis Organization 14 Chapter 2 Metal-doped process 29 2.1 Process Flow of OLED Fabrication 30 2.2 Setup of the Measurement System 32 2.3 Optical and Electrical Characteristics of the Metal-Doped Organic Materials 33 2.4 Device Performance of the Metal-Doped OLED 35 Chapter 3 Red Organic Light-Emitting Device 49 3.1 Optical Characteristics and Energy Diagram of the Red Dopant Material 50 3.2 Red OLED with a Conventional Device Structure 51 3.3 Red OLED with the Hole-Blocking Layer 52 Chapter 4 Conclusions 62 4.1 Conclusions and Future Works of MD OLED 62 4.2 Conclusions and Future Works of Red OLED 63 | |
dc.language.iso | en | |
dc.title | 以金屬摻雜技術及紅光染料增進有機發光元件之特性 | zh_TW |
dc.title | Performance Improvement of Organic Light-Emitting Device by Using Metal-Dopant Technology and a Red Dye | en |
dc.type | Thesis | |
dc.date.schoolyear | 93-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 梁文傑,李志堅 | |
dc.subject.keyword | 有機發光顯示器,紅光有機發光顯示器,金屬摻雜有機發光顯示器,有機, | zh_TW |
dc.subject.keyword | OLED,red OLED,MD OLED,Organic, | en |
dc.relation.page | 63 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2005-07-28 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 光電工程學研究所 | zh_TW |
顯示於系所單位: | 光電工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-94-1.pdf 目前未授權公開取用 | 992.73 kB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。