搜尋
新增篩選器:
使用篩選器讓結果更精確。
第 1 到 5 筆結果,共 5 筆。
- 上一個
- 1
- 下一個
符合的文件:
出版年 | 標題 | 作者 | 系所 |
---|---|---|---|
2007 | Fe-Ni-Cr-Mo 燒結硬化型合金鋼製程及機械性質之改善 The Improvement on Processes and Mechanical Properties of Fe-Ni-Cr-Mo Sinter-Hardening Steels | Li-Hui Cheng; 鄭禮輝 | 材料科學與工程學研究所 |
2008 | 金屬射出成形脫脂製程中缺陷產生的原因及其解決方法 The Causes of Defects during MIM Debinding Process and Methods of Improvement | Yang-Liang Fan; 范揚樑 | 材料科學與工程學研究所 |
2007 | Fe-Ni燒結硬化合金鋼中Ni之均質化及機械性質改善對策 Improvement on the Homogenization of Ni in Fe-Ni Sinter-Hardening Alloy Steels | Chia-Cheng Tsai; 蔡嘉正 | 材料科學與工程學研究所 |
2008 | 添加石墨對17-4 PH金屬射出成形零件之SiO2夾雜物及機械性質之影響 Effect of Graphite Addition on the SiO2 Inclusions and the Mechanical Properties of 17-4 PH MIM Parts | Che-Wei Chang; 張哲瑋 | 材料科學與工程學研究所 |
2006 | 鐵-磷-碳系低溫燒結合金之製程及機械性質 Processing and Mechanical Properties of Low-Temperature Sintered Fe-P-C Alloy | Fu-Cheng Yen; 顏福成 | 材料科學與工程學研究所 |
探索
系所
關鍵字
- 1 metal injection molding,17-4 ph s...
- 1 metal injection molding,17-4 ph s...
- 1 metal injection molding,17-4 ph s...
- 1 metal injection molding,17-4 ph s...
- 1 metal injection molding,low tempe...
- 1 metal injection molding,low tempe...
- 1 metal injection molding,low tempe...
- 1 metal injection molding,low tempe...
- 1 metal injection molding,powder in...
- 1 metal injection molding,powder in...
- 下一頁 >
全文
- 5 true