請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/34955完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 廖運炫 | |
| dc.contributor.author | Yu-Chieh Chen | en |
| dc.contributor.author | 陳宇杰 | zh_TW |
| dc.date.accessioned | 2021-06-13T06:37:33Z | - |
| dc.date.available | 2005-10-05 | |
| dc.date.copyright | 2005-10-05 | |
| dc.date.issued | 2005 | |
| dc.date.submitted | 2005-09-30 | |
| dc.identifier.citation | 1.G. MacDonald, Superalloys source book-A collection of outstanding articles from the technical literature, Pub. by ASM, 1984, 3-19
2.C.T. Sims, N.S. Stoloff and W.C. Hagel, Superalloys Ⅱ, General Electric Company, 1987 3.J.K. Tien and T. Caulfield, Superalloys, supercomposites and superceramics, Academic Press, Inc., 1989 4.Huntington Alloy Products Division, Inconel alloy 718, The International Nickel Company, Inc., Huntington, West Virginia 25720, 1978 5.H.E. Boyer and T.L. Gall, Metals handbook, Pub. by ASM, Desk Edition, Section 16, 1985 6.Huntington Alloy Products Division, Machining huntington alloys, The International Nickel Company, Inc., Huntington, West Virginia 25720, 1978 7.N. Zlatin and J. Chrisstopher, “Machining characteristics of difficult to machine materials,” Influence of Metallurgy on Machinability, Edited by Tipnis, V.A., Pub. by ASM, 1975, 296-307 8.J.M. Oblak, D.F. Paulonis and D.S. Duvall, “Coherency strengthening in Ni base alloys hardened by DO22 precipitates,” Metallurgical Transactions, Vol. 5, 1974, 143-149 9.F.W. Gosler, “Machinability data applied to aircraft engine manufacture,” Machinability Testing and Utilization of Machining Data Ⅳ, ASM, 1979, 221-238 10.R. Komanduri and T.A. Schroeder, “On shear instability in machining a nickel -iron base superalloy,” Journal of Engineering for Industry, Vol. 108, 1986, 93-100 11.馬承九，機械加工（切削加工篇），東華書局，第三章，民國87年初版 12.E.C. Orth and S. Ebenhoch, “Machining workhardening metals,” The Carbide and Tool Journal, Vol. 15, No. 3, 1983, 3-7 13.E.O. Ezugwu and C.J. Lai, “Failure modes and wear mechanisms of M35 high speed steel drills when machining Inconel 901,” Journal of Materials Processing Technology, Vol. 49, 1995, 295-312 14.林憲茂，INCONEL 718超合金車削特性之探討，國立台灣大學機械工程研究所碩士論文，民國76年 15.I.A. Choudhury and M.A. EI-Baradie, “Machining nickel base superalloys: Inconel 718,” Proc. Instn. Engrs., Vol. 212 Part B, 1998, 195-206 16.Y.S. Liao and R.H. Shiue, “Carbide tool wear mechanism in turning of Inconel 718 superalloy,” Wear, Vol.193, No. 1, 1996, 16-24 17.M. Rahman, W.K.H. Seah and T.T. Teo, “The machinability of Inconel 718,” Journal of Materials Processing Technology, Vol. 63, 1997, 199-204 18.T. Kitagawa, A. Kubo and K. Maekawa, “Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti-6Al-6V-2Sn,” Wear, Vol. 202, 1997, 142-148 19.E.O. Ezugwu and Z.M. Wang, “Wear of coated carbide tools when machining nickel (Inconel 718) and titanium base (Ti-6Al-4V) alloys,” Tribology Tansactions, Vol. 43, 2000, 263-268 20.P.C. Jindal, A.T. Santhanam, U. Schleinkofer and A.F. Shuster, “Performance of PVD TiN, TiCN, and TiAlN coated cemented carbide tools in tuning,” International Journal of Refractory Metals & Hard Materials, Vol. 17, 1999, 163-170 21.M. Berger and S. Hogmark, “Tribological properties of selected PVD coatings when slid ductile materials,” Wear, Vol. 252, 2002, 557-565 22.L.N. Lopez de lacalle, J. Perez, J.I. Llorente and J.A. Sanchez, “Advanced cutting conditions for the milling of aeronautical alloys,” Journal of Materials Processing Technology, Vol. 100, 2000, 1-11 23.M. Alauddin, M.A. EI-Baradie and M.S.J. Hashmi, “Optimization of surface finish in end milling Inconel 718,” Journal of Materials Processing Technology, Vol. 56, 1996, 54-65 24.陳志名，面銑削Inconel 718刀具破壞之研究，國立台灣大學機械工程研究所碩士論文，民國83年 25.王志豪，高速端銑削Inconel 718之現象分析，國立台灣大學機械工程研究所碩士論文，民國86年 26.L.N. Lopez de Lacalle, J. Perez-Bilbatua, J.A. Sanchez, J.I. Llorente, A. Gutierrez and J. Alboniga, “Using high pressure coolant in the drilling and turning of low machinability alloys,” International Journal of Advanced Manufacturing Technology, Vol. 16, 2000, 85-91 27.林維新，INCONEL 718超合金鑽削性之探討，國立台灣大學機械工程研究所碩士論文，民國74年 28.B. Mubaraki, S. Bandyopadhyay, R. Fowle and P. Mathew, “Drilling studies of an Al2O3-Al metal matrix composite part Ⅰ drill wear characteristics,” Journal of Materials Science, Vol. 30, 1995, 6273-6280 29.M.Z. Zhang, Y.B. Liu and H. Zhou, “Wear mechanism maps of uncoated HSS tools drilling die-cast aluminum alloy,” Tribology International, Vol. 34, 2001, 727-731 30.S.G. Harris, E.D. Doyle, A.C. Vlasveld, J. Audy and D. Quick, “A study of the wear mechanisms of Ti1-xAlxN and Ti1-x-yAlxCryN coated high-speed steel twist drills under dry machining conditions,” Wear, Vol. 254, 2003, 723-734 31.J. Paulo Davim and A. Monteiro Baptista, “Relationship between cutting force and PCD cutting tool wear in machining silicon carbide reinforced aluminum,” Journal of Materials Processing Technology, Vol. 103, 2000, 417-423 32.K. Subramanian and N.H. Cook, “Sensing of drill wear and prediction of drill life,” Transactions of the ASME-Journal of Engineering for Industry, May 1977, 295-301 33.E. Morin, J. Masounave and E.E. Laufer, “Effect of drill wear on cutting forces in the drilling of metal-matrix composities,” Wear, Vol. 184, 1995, 11-16 34.M. Elhachimi, S. Torbaty and P. Joyot, “Mechanical modeling of high speed drilling 1: predicting torque and thrust,” Int. J. Mach. Tools Manufact., Vol. 39, 1999, 553-568 35.M. Elhachimi, S. Torbaty and P. Joyot, “Mechanical modeling of high speed drilling 2: predicted and experimental results,” Int. J. Mach. Tools Manufact., Vol. 39, 1999, 569-581 36.C. Rubenstein, “The torque and thrust force in twist drilling-I. theory,” Int. J. Mach. Tools Manufact., Vol. 31, no. 4, 1991, 481-490 37.C. Rubenstein, “The torque and thrust force in twist drilling-II,” Int. J. Mach. Tools Manufact., Vol. 31, no. 4, 1991, 491-504 38.V. Chandrasekharan, S.G. KApoor and R.E. DeVor, “A mechanistic approach to predicting the cutting forces in drilling: with application to fiber-reinforced composite materials,” Journal of Engineering for Industry, Vol. 117, 1995, 559-570 39.E.J.A. Armarego and A. Rotenberg, “An investigation of drill point sharpening by the straight lip conical grinding method-Ⅰ. Basic analysis,” Int. J. Mach. Tool des. Res., Vol. 13, 1973, 155-164 40.E.J.A. Armarego and A. Rotenberg, “An investigation of drill point sharpening by the straight lip conical grinding method-Ⅱ. A criterion for selecting a solution,” Int. J. Mach. Tool des. Res., Vol. 13, 1973, 165-182 41.E.J.A. Armarego and H. Zhao, “Predictive force models for point thinned and circular centre edge twist drill designs,” Annals of the CIRP, 45/1, 1996, 65-70 42.S.V. Muthukrishna Selvam and C. Sujatha, “Twist drill deformation and optimum drill geometry,” Computers & Structures, Vol. 57, no. 5, 1995, 903-914 43.R.E. Howe, Producibility/machinability of Spaceage and conventional materials, Pub. by ASTME Dearbon, Michigan, Chap. 1,2,5,7, 1968 44.F.W. Wilson and R.W. Cox, Machining the spaceage metals, Pub. By ASTME. Dearbon, Michigan, Chap. 5, 1965 45.C. Rubenstein, W.S. Lau and M. Wang, “The torque and thrust arising from contact at the chisel edge and margins in spade drilling of ductile materials,” Int. J. Mach. Tools Manufact., Vol. 29, no. 3, 1989, 441-452 46.呂彥明、樊銳、陳五一、陳鼎昌，鑽尖數控刃磨中的尾隙角研究，北京航空航天大學學報第25卷第四期，1999年8月，462-466 47.W.C. Chen and K.H. Fuh, “The cutting performance of a TiN-coated drill with curved primary cutting edges,” Journal of Materials Processing Technology, Vol. 49, 1995, 183-198 48.W.C. Chen and X.D. Liu, “Study on the various coated twist drills for stainless steels drilling,” Journal of Materials Processing Technology, Vol. 99, 2000, 226-230 49.H.K. Tonshoff and A. Mohlfeld, “PVD-coating for wear protection in dry cutting operations,” Surface & Coatings Technology, Vol. 93, 1997, 88-92 50.H. Takeyama and S. Kato, “Burrless drilling by means of ultrasonic vibration,” Annals of the CIRP, 40/1, 1991, 83-86 51.D.Y. Zhang, X.J. Feng, L.J. Wnag and D.C. Chen, “Study on the drill skidding motion in ultrasonic vibration microdrilling,” Int. J. Mach. Tools Manufact., Vol. 34, no. 6, 1994, 847-857 52.D.Y. Zhang and L.J. Wang, “Investigation of chip in vibration drilling,” Int. J. Mach. Tools Manufact., Vol. 38, no. 3, 1998, 165-176 53.H.G. Towes, W.D. Compton and S. Chandrasekar, “A study of the influence of superimposed low-frequency modulation on the drilling process,” Precision Engineering, Vol. 22, 1998, 1-9 54.李漢州，利用振動以達高速切削運用在小徑孔鑽削之研究，國立雲林科技大學機械工程研究所碩士論文，民國88年 55.L.B. Zhang, L.J. Wang and X. Wang, “Study on vibration drilling of fiber reinforced plastics with hybrid variation parameters method,” Composites: Part A, Vol. 34, 2003, 237-244 56.X. Wang, L.J. Wang and J.P. Tao, “Investigation on thrust in vibration drilling of fiber-reinforced plastics,” Journal of Materials Processing Technology, Vol. 148, 2004, 239-244 57.R. Cozar and A. Pineau, “Morphology of and precipitates and thermal stability of Inconel 718 type alloys,” Metallurgical Transactions, Vol. 104, 1973, 47-59 58.井川博、伍代友和 著，王建義 譯，鎳基耐熱超合金之銲接，機械月刊11卷1期，民國74年1月 59.C.R. Brooks, Heat treatment, structure and properties of nonferrous alloys, Pub. by ASM, 1982 60.I. Kirman and D.H. Warrington, “The precipitation of Ni3Nb phases in a Ni-Fe-Cr-Nb alloys,” Metallurgical Transactions, Vol. l, no. 10, 1970, 2667 61.G.E. Dieter, Mechanical metallurgy, McGraw-Hill Book Company, 1988 62.M.C. Shaw, A.L. Thunrman and H.J. Ahlgren, “A plasticity problem involving plane strain and plane stress simultaneously: Groove formation in the machining of high-temperature alloys,” Transactions of the ASME, 1966, 142-146 63.B.H. Kear, J.M. Oblak and A.F. Giami, “Precipitation hardened nickel-base alloys,” Metallurgical Transactions, Vol. 1, 1970, 2477-2486 64.M.C. Shaw, Metal Cutting Principles, Oxford Univ. Press New York (1984) 65.洪良德，切削刀具學，全華科技圖書公司，第三章，民國92年3版 66.傅光華，切削工具學，高立圖書公司，第六章，民國75年3版 67.S. Kalpakjian, Manufacturing engineering and technology, Addison-Wesley Publishing Company, Chap. 22, 1992 68.S. Ramalingam and P.K. Wright, “Abrasive wear in machining: Experiment with material of controlled microstructure,” Journal of Engineering Materials and Technology, Vol. 103, 1981, 151-156 69.范光照、黃漢邦、陳炳煇、張所鈜、顏家鈺編著，奈米工程概論，普林斯頓國際有限公司，民國92年 70.張立德，納米材料，北京：化學工業出版社，2000年 71.莊允中，奈米技術之應用與市場分析，金屬工業研究發展中心出版，民國92年初版 72.馬振基，奈米材料科技原理與應用，全華科技圖書股份有限公司出版，民國92年初版 73.川合知二 著，林振華 譯，奈米技術入門，全華科技圖書，民國94年 74.Y.J. Gao, G.X. Chen, Y. Oli, Z.J. Zhang and Q.J. Xue, “Study on tribological of oleic acid-modified TiO2 nanoparticle in water,” Wear, Vol. 252, 2002, 454-458 75.Z.S. Hu, R. Lai, F. Lou, L.G. Wang, Z.L. Chen, G.X. Chen and J.X. Dong, “Preparation and tribological properties of nanometer magnesium borate as lubricating oil additive,” Wear, Vol. 252, 2002, 370-374 76.P.P. Ye, X.X. Jiang, S. Li and S.H. Li, “Preparation of NiMoO2S2 nanoparticle and investigation of its tribological behavior as additive in lubricating oils,” Wear, Vol. 253, 2002, 572-575 77.佐藤敏一 著，蘇品書 譯，特殊加工，復漢出版社，1984年 78.賴耿陽，超音波工學理論實務，復漢出版社，2001年3月 79.蔡文德，超音波加工之最佳化設計，國立台灣大學機械工程研究所碩士論文，民國79年 80.林良平編著，電子顯微鏡生物技術，行政院國家科學委員會編印，民國62年8月，99-104 81.陳昶瑋，含有機鉬化合物對鋼材表面磨耗機制的影響，國立台灣大學機械工程研究所碩士論文，民國92年 82.E. Usui and H. Takayama, J. Engng Ind. B82, 1960, 303 83.L. Cizaire, B. Vacher, T. Le Mogne, J.M. Martin, L. Rapoport, A. Margolin and R. Tenne, “ Mechanisms of ultra-low friction by hollow inorganic fullerene-like MoS2 nanoparticle,” Surface and Coating Technology, Vol. 160, 2002, 282-287 84.J. Kumabe, Fundamentals and application of vibration cutting, Jikkyo Publishing Co. Ltd. Japan, 1979 85.Y.D. Zhang, J.Y. Yu and C. Wang, “Influence of honing load on resonance frequency of ultrasonic honing vibration system,” Shengxue Xuebao/Acta Acustica, Vol. 19, no. 5, 1994, 367-371 | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/34955 | - |
| dc.description.abstract | 以碳化鎢鑽頭鑽削鎳基超合金Inconel 718，至今沒有提升切削效率的對策，本文由分析鍍層鑽頭的破壞模式，提出相對應之改善方案。實驗發現四個階段的破壞機制中，刀具與材料間過大之摩擦應力為主要因素，不但引發鍍層脫落及刃口積屑(BUE)形成，同時提供材料內部裂紋成長能量，造成切削刃邊的斷裂，次要原因則為韌性之長連續屑發生，引起更大之刀具破壞。
研究中加入奈米尺寸碳氫分子顆粒組成之奈米切削液，發現能有效降低鑽削推力及扭矩，延長刀具壽命三倍。其作用機制有二，一為鑽槽邊切屑-刀具之滑動區域及刀腹邊刀具-工件接觸區域，加工中奈米顆粒深入金屬表面，附著並形成薄膜，避免了金屬與金屬間之直接接觸摩擦，緩和鑽頭破壞。另外則是提供鑽槽區域較低摩擦之切屑流動，排屑更為順暢。同時以奈米切削液配合未鍍層刀具使用，在相同的加工條件下，可以大幅減少生產成本。 本研究自行設計並改裝一超音波壓電振動子與工具機刀具夾頭相互結合，完成由鑽頭刀具端振動之加工方式。應用超音波振動輔助鑽削，縮減了屑的尺寸，亦增加了碎屑產生的比例，有效抑制鑽削末期不穩定之扭矩變化。振幅較頻率對鑽削壽命影響為大，實驗歸納出最佳組合之31.8 KHz頻率及4 μm振幅超音波參數，可得到最佳的鑽削結果。深孔加工時，以超音波振動輔助模式可以取代啄鑽提刀設定，可節省1/3的加工時間，有效增進加工效率。 | zh_TW |
| dc.description.abstract | The fracture mechanisms and the approaches to prolong the service life of the coated carbide tool in drilling Inconel 718 superalloy are presented. Four fracture stages are identified in this study. The extra friction between the tool-workpiece interfaces results in the abrasion of the coated layer is the major cause of drill fracture. The BUE is formed and subsurface fatigue cracks are initiated and grow sequentially. Eventually the cutting edge near the periphery is damaged. Therefore, long and thick chip forms leading to unstable drilling force and flank wear is worsened as a result.
Drilling experiments with the use of the nano cutting fluid containing the hydrocarbon molecule are conducted. It is found that the service life of the drill is lengthened significantly and drilling force is decreased. EDAX is taken to identify the constituents on the sliding region of chip-tool interface and contacting region between the tool flank and workpiece. It is found that nano particles are deeply adsorbing and may react with the metal surface. A layer forms to avoid the direct contact between the drill and the workpiece. In addition, less friction coefficient for chip flow is obtained on the drill flute region when nano cutting fluid is applied. It is also noted that the use of uncoated carbide drill with nano cutting fluid results in an even better drill life as compare with that resulting from traditional drilling. The tool holder of a machining center is retrofitted so that a piezoelectric driven ultrasonic vibration oscillator can be integrated to produce axial harmonic vibration during drilling process. The ultrasonic vibration assisted drilling is applied to eliminate the cutting resistance from long chips. Experimental results show that the chip size is reduced, and the variation of torque in drilling becomes smaller. It is also found that there is little improvement in drilling performance when the frequency of the ultrasonic vibration is varied. On the contrary, a drill’s life is greatly increased by controlling the amplitude of the vibration. The frequency of 31.8 KHz and the amplitude of 4μm result in the best drill life and quality of the drilled hole. Concerning drilling efficiency, it is found that by applying ultrasonic vibration assisted drilling, lifting of the drill in conventional drilling of a high aspect ratio hole is not necessary, and saving one-third of the working time is obtained. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-13T06:37:33Z (GMT). No. of bitstreams: 1 ntu-94-D88522022-1.pdf: 3715190 bytes, checksum: bf9de821c3b256db28d65e2de8860c4f (MD5) Previous issue date: 2005 | en |
| dc.description.tableofcontents | 中文摘要 ………………………………………………………………… I
英文摘要 ………………………………………………………………… Ⅱ 目錄 ……………………………………………………………………… IV 圖目錄 …………………………………………………………………… VII 表目錄 …………………………………………………………………… XII 符號說明 ………………………………………………………………… XIII 第壹章、導論 ………………………………………………………… 1 1.1 研究動機 ……………………………………………………………… 1 1.2 文獻回顧 ……………………………………………………………… 4 1.3 研究目的 ……………………………………………………………… 9 1.4 論文架構 ……………………………………………………………… 10 第貳章、相關理論 ………………………………………………… 11 2.1 鎳基超合金Inconel 718 …………………………………………… 11 2.1.1 材料組成 ……………………………………………………… 11 2.1.2 強化機構及切削性 …………………………………………… 17 2.2 鑽削加工 ……………………………………………………………… 21 2.2.1 鑽頭形狀 ……………………………………………………… 21 2.2.2 鑽尖與鑽腹對鑽削作用的影響 ……………………………… 22 2.2.3 鑽頭分類 ……………………………………………………… 26 2.3 刀具破壞理論 ……………………………………………………… 28 2.4 奈米顆粒基本性質 ………………………………………………… 33 2.5 超音波理論 ………………………………………………………… 38 2.5.1 超音波振動子 ………………………………………………… 39 2.5.2 振幅喇叭之設計 ……………………………………………… 43 第參章、實驗方法及設備 ………………………………………… 45 3.1 實驗方法 …………………………………………………………… 45 3.1.1 鑽頭破壞機制推導 …………………………………………… 47 3.1.2 加工參數最佳化 ……………………………………………… 47 3.1.3 奈米切削液對鑽削加工之影響 ……………………………… 48 3.1.4 超音波振動輔助鑽削對加工之探討 ………………………… 50 3.2 實驗設備名稱及詳細規格 ………………………………………… 51 第肆章、鑽削參數最佳化與鑽頭破壞機制 ………………… 55 4.1鑽削參數最佳化 …………………………………………………… 55 4.1.1 鑽尖角與餘隙角對鑽頭破壞之影響 ………………………… 55 4.1.2 鑽尖角與餘隙角對鑽頭壽命之影響 ……………………… 61 4.2 鑽頭破壞機制 ………………………………………………………… 65 4.3 小結 ………………………………………………………………… 73 第伍章、奈米切削液應用於鑽削加工之研究 ……………… 74 5.1 奈米切削液 ………………………………………………………… 74 5.2 添加奈米切削液對於鑽削之影響 ………………………………… 76 5.3 小結 ………………………………………………………………… 87 第陸章、超音波振動輔助鑽削加工Inconel 718 ………… 88 6.1 振動機構的設計 …………………………………………………… 88 6.2 超音波振動輔助鑽削與一般鑽削之比較 ………………………… 94 6.3 振幅與頻率對於鑽削之影響 ……………………………………… 99 6.4 超音波振動輔助鑽削與啄鑽加工之比較 ………………………… 103 6.5 小結 ………………………………………………………………… 106 第柒章、結論與未來展望 ……………………………………… 107 7.1 結論 ………………………………………………………………… 107 7.2 未來展望 …………………………………………………………… 109 參考文獻 ……………………………………………………… 111 | |
| dc.language.iso | zh-TW | |
| dc.subject | 奈米切削液 | zh_TW |
| dc.subject | Inconel 718 | zh_TW |
| dc.subject | 鑽削加工 | zh_TW |
| dc.subject | 超音波振動輔助鑽削 | zh_TW |
| dc.subject | drilling | en |
| dc.subject | Inconel 718 | en |
| dc.subject | ultrasonic vibration assisted drilling | en |
| dc.subject | nano cutting fluid | en |
| dc.title | 鑽削鎳基超合金Inconel 718之研究 | zh_TW |
| dc.title | Study in drilling of nickel-base superalloy Inconel 718 | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 94-1 | |
| dc.description.degree | 博士 | |
| dc.contributor.oralexamcommittee | 顏炳華,傅光華,趙崇禮,羅勝益,蔡曜陽 | |
| dc.subject.keyword | Inconel 718,鑽削加工,奈米切削液,超音波振動輔助鑽削, | zh_TW |
| dc.subject.keyword | Inconel 718,drilling,nano cutting fluid,ultrasonic vibration assisted drilling, | en |
| dc.relation.page | 117 | |
| dc.rights.note | 有償授權 | |
| dc.date.accepted | 2005-09-30 | |
| dc.contributor.author-college | 工學院 | zh_TW |
| dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
| 顯示於系所單位： | 機械工程學系 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-94-1.pdf 未授權公開取用 | 3.63 MB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。