請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/34484
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 林招松(Chao-Sung Lin) | |
dc.contributor.author | Cheng–Yang Tsai | en |
dc.contributor.author | 蔡承洋 | zh_TW |
dc.date.accessioned | 2021-06-13T06:10:58Z | - |
dc.date.available | 2020-07-25 | |
dc.date.copyright | 2011-08-09 | |
dc.date.issued | 2011 | |
dc.date.submitted | 2011-07-25 | |
dc.identifier.citation | 1.S. Wernick, R. Pinner, Surface Treatment of Aluminum, 1 (1972) 233-290.
2.C. Edeleanu, U.R. Evans, Trans. Faraday Soc. 65 (1949) 683. 3.M.J. Pryor, Z. Elektrochem. 62 (1958) 782. 4.M.F. Abd Rabbo, J.A. Richardson, G.C. Wood, A study of the effects of inhibitive and aggressive ions on oxide-coated aluminium using secondary ion mass spectrometry, Corros. Sci. 16 (1976) 677-687. 5.M. Koudelkova, J. Augustynski, H. Berthou, On the composition of the passivating films formed on aluminum in chromate solutions, J. Electrochem. Soc. 124 (1977) 1165-1168. 6.H. A. Katzman, G. M. Malouf, Corrosion –protective chromate coatings on aluminum, Appl. Surf. Sci. 2 (1979) 416-432. 7.J. K. Hawkins, H.S. Isaacs, S.M. Heald, J. Tranquada, G.E. Thompson, G.C. Wood, An investigation of chromate inhibitors on aluminium using fluorescence detection of x-ray absorption, Corros. Sci. 27 (1987) 391-399. 8.M.W. Kendig, A.J. Davenport, H.S. Isaacs, The mechanism of corrosion inhibition by chromate conversion coatings from x-ray absorption near edge spectroscopy (XANES), Corros. Sci. 34 (1993) 41-49. 9.F.W. Lytle, R.B. Greegor, G.L. Bibbins, K.Y. Blohowiak, R.E. Smith, G.D. Tuss, An investigation of the structure and chemistry of a chromium-conversion surface layer on aluminum, Corros. Sci. 37 (1995) 349-369. 10.L. Xia, R.L. McCreery, Chemistry of a chromate conversion coating on aluminum alloy AA2024-T3 probed by vibrational spectroscopy, J. Electrochem. Soc. 145 (1998) 3083-3089. 11.L. Xia, E. Akiyama, G, Frankel, R. McCreery, Storage and release of soluble hexavalent chromium from chromate conversion coatings, J. Electrochem. Soc. 147 (2000) 2556-2562. 12.J. Zhao, L. Xia, A. Sehgal, D. Lu, R.L. McCreery, G.S. Frankel, Effect of chromate and chromate conversion coatings on corrosion of aluminum alloy 2024-T3, Surf. Coat. Technol. 140 (2001) 51-57. 13.P. Campestrini, S. Bohm, T. Schram, H. Terryn, J.H.W. de Wit, Study of the formation of chromate conversion coatings on Alclad 2024 aluminum alloy using spectroscopic ellipsometry, Thin Solid Films 410 (2002) 76-85. 14.P. Campestrini, E.P.M. van Westing, A. Hovestad, J.H.W. de Wit, Investigation of the chromate conversion coating on Alclad 2024 aluminium alloy: effect of the pH of the chromate bath, Electrochim. Acta 47 (2002) 1097-1113. 15.M.P. Gigandet, J. Faucheu, M. Tachez, Formation of black chromate conversion coatings on pure and zinc alloy electrolytic deposits: role of the main constituents, Surf. Coat. Technol. 89 (1997) 285-291. 16.A. A.O. Magalhaes, I.C.P. Margarit, O.R. Mattos, Electrochemical characterization of chromate coatings on galvanized steel, Electrochim. Acta 44 (1999) 4281-4287. 17.R. Ramanauskas, L .Gudaviciute, L. Diaz-Ballote, P. Bartolo- Perez, P. Quintana, Corrosion behaviour of chromate Zn and Zn alloy electrodeposits, Surf. Coat. Technol. 140 (2001) 109-115. 18.X. Zhang, C. van den Bos, W.G. Sloof, A. Hovestad, H. Terryn, J.H.W. de Wit, Comparison of the morphology and corrosion performance of Cr(VI)-and Cr(III)-based conversion coatings on zinc, Surf. Coat. Technol. 199 (2005) 92-104. 19.B. Ramezanzadeh, M.M. Attar, M. Farzam, Corrosion performance of hot-dip galvanized steel treated by different kinds of conversion coatings, Surf. Coat. Technol. 205 (2010) 874-884. 20.V.d.F.C. Lins, G.F.d.A. Reis, C.R.d. Araujo, T. Matencio, Electrochemical impedance spectroscopy and linear polarization applied to evaluation of porosity of phosphate conversion coatings on electrogalvanized steels, Appl. Surf. Sci. 253 (2006) 2875-2884. 21.E.P. Banczek, P.R.P. Rodrigues, I. Costa, Evaluation of porosity and discontinuities in zinc phosphate coating by means of voltametric anodic dissolution (VAD), Surf. Coat. Technol. 203 (2009) 1213-1219. 22.J. Creus, H. Mazille, H. Idrissi, Porosity evaluation of protective coatings onto steel, through electrochemical techniques, Surf. Coat. Technol. 130 (2000) 224-232. 23.N. Helliwell, D.R. Gabe, M.O.W. Richardson, Potential Measurements During Phosphating, Trans. Inst. Met. Fin. 54 (1976) 185-190. 24.N. Satoh, Effects of heavy metal additions and crystal modification on the zinc phosphating of electrogalvanized steel sheet, Surf. Coat. Technol. 30 (1987) 171-181. 25.N. Satoh, T. Minami, Relationship between the formation of zinc phosphate crystals and their electrochemical properties, Surf. Coat. Technol. 34 (1988) 331-343. 26.N. Sato, T. Minami, H. Kono, Analysis of metallic components in zinc phosphate films using electron spin resonance and X-ray fluorescence, Surf. Coat. Technol. 37 (1989) 23-30. 27.D. Zimmermann, A.G. Munoz, J.W. Schultze, Microscopic local elements in the phosphating process, Electrochim. Acta 48 (2003) 3267-3277. 28.D. Zimmermann, A.G. Munoz, J.W. Schultze, Formation of Zn-Ni alloys in the phosphating of Zn layers, Surf. Coat. Technol. 197 (2005) 260-269. 29.K. Ogle, A. Tomandl, N. Meddahi, M. Wolpers, The alkaline stability of phosphate coatings I: ICP atomic emission spectroelectrochemistry, Corros. Sci. 46 (2004) 979-995. 30.A. Tomandl, M. Wolpers, K. Ogle, The alkaline stability of phosphate coatings II: in situ Raman spectroscopy, Corros. Sci. 46 (2004) 997-1011. 31.A.S. Akhtar, D. Susac, P. Glaze, K.C. Wong, P.C. Wong, K.A.R. Mitchell, The effect of Ni2+ on zinc phosphating of 2024-T3 Al alloy, Surf. Coat. Technol. 187 (2004) 208-215. 32.A.S. Akhtar, D. Susac, P.C. Wong, K.A.R. Mitchell, The effect of pH and role of Ni2+ in zinc phosphating of 2024-Al alloy Part II: Microscopic studies with SEM and SAM, Appl. Surf. Sci. 253 (2006) 502-509. 33.A.S. Akhtar, K.C. Wong, K.A.R. Mitchell, The effect of pH and role of Ni2+ in zinc phosphating of 2024-Al alloy Part I: Macroscopic studies with XPS and SEM, Appl. Surf. Sci. 253 (2006) 493-501. 34.A.S. Akhtar, K.C. Wong, P.C. Wong, K.A.R. Mitchell, Effect of Mn2+ additive on the zinc phosphating of 2024-Al alloy, Thin Solid Films 515 (2007) 7899-7905. 35.K. Ishizuka, H. Shindo, K. Hayashi, Phosphate-treated galvanized steel sheet excellent in corrosion resistance and paintability, US Patent 6,596,414 B1 (2003). 36.K. Ishizuka, H. Shindo, Zinc phosphate-treated galvanized steel sheet excellent in corrosion resistance and color tone, US Patent 6,649,275 B1 (2003). 37.K. Ishizuka, K. Hayashi, H. Shindo, K. Nishimura, The effect of Mg addition to the phosphate film on the properties of prephosphated electrogalvanized steel sheets, Galvatech. (2007) 219-223. 38.B.L. Lin, J.T. Lu, G. Kong, Synergistic corrosion protection for galvanized steel by phosphating and sodium silicate post-sealing, Surf. Coat. Technol. 202 (2008) 1831-1838. 39.B.L. Lin, J.T. Lu, G. Kong, Effect of molybdate post-sealing on the corrosion resistance of zinc phosphate coatings on hot-dip galvanized steel, Corros. Sci. 50 (2008) 962-967. 40.U. Kazuya, K. Takahiro, M. Tatsuya, Y. Masaaki, 2001, Zinc Phosphate Composite Treated Steel Panel, Japan Patent, 2001, 2001105528. 41.L. Kouisni, M. Azzi, M. Zertoubi, F. Dalard, S. Maximovitch, Phosphate coatings on magnesium alloy AM60 part 1: study of theformation and the growth of zinc phosphate films, Surf. Coat. Technol. 185 (2004) 58-67. 42.Y.Y. Xu, B.L .Lin, Effect of silicate pretreatment, post-sealing and additives on corrosion resistance of phosphated galvanized steel, Trans. Nonferrous Met. SOC. China 17(2007) 1248-1253. 43.B.L. Lin, J.T. Lu, G. KONG, J. Liu, Growth and corrosion resistance of molybdate modified zinc phosphate conversion coatings on hot-dip galvanized steel, Trans. Nonferrous Met. SOC. China 17(2007) 755-761. 44.M. Wolpers, J. Angeli, Activation of galvanized steel surfaces before zinc phosphating — XPS and GDOES investigations, Appl. Surf. Sci. 179 (2001) 281-291. 45.C.B. Breslin, G. Treacy, W.M. Carroll, Studies on the passivation of aluminium in chromate and molybdate solutions, Corros. Sci. 36 (1994) 1143-1154. 46.R.L. Twite, G.P. Bierwagen, Review of alternative to chromate for corrosion protection of aluminum, Prog. Org. Coat., 33 (1998) 91-100. 47.G.M. Treacy, G.D. Wilcox, M.O.W. Richardson, Behaviour of molybdate passivated zinc coated steel exposed to corrosive chloride environments, J. Appl. Electrochem. 29 (1999) 647-654. 48.S. Zein El Abedin, Role of chromate, molybdate and tungstate anions on the inhibition of aluminium, J. Appl. Electrochem. 31 (2001) 711-718. 49.S.A.M. Refaey, S.S. Abd El-Rehim, F. Taha, M.B. Saleh, R.A. Ahmed, Inhibition of chloride localized corrosion of mild steel by PO43-, CrO42-, MoO42-, and NO2- anions, Appl. Surf. Sci. 158 (2000) 190-196. 50.G.O. Ilevbare, G.T. Burstein, The inhibition of pitting corrosion of stainless steels by chromate and molybdate ions, Corros. Sci. 45 (2003) 1545-1569. 51.J.W.J. Silva, E.N. Codaro, R.Z. Nakazato, L.R.O. Hein, Influence of chromate, molybdate and tungstate on pit formation in chloride medium, Appl. Surf. Sci. 252 (2005) 1117-1122. 52.M.A. Amin, H.H. Hassan, S.S.A.E. Rehim, On the role of NO2- ions in passivity breakdown of Zn in deaerated neutral sodium nitrite solutions and the effect of some inorganic inhibitors Potentiodynamic polarization, cyclic voltammetry, Electrochim. Acta 53 (2008) 2600-2609. 53.G.D. Wilcox, D.R. Gabe, M.E. Warwick, The development of passivation coatings by cathodic reduction in sodium molybdate solutions, Corros. Sci. 28 (1988) 577-587. 54.G.D. Wilcox, D.R. Gabe, Chemical molybdate conversion treatments for zinc, Met. Fin. 9 (1988) 71-74. 55.H. Keping, F. Jingli, Colour conversion coatings on zinc, Trans, IMF, 74 (1996) 36-38. 56.C. M. Mustafa, S. M. Shahinoor, Islam Dulal, Corrosion, 52 (1996) 16. 57.A.A.O. Magalhaes, I.C.P. Margarit, O.R. Mattos, Molybdate conversion coatings on zinc surfaces, J. Electroanal. Chem. 572 (2004) 433-440. 58.H. Konno, K. Narumi, H. Habazaki, Molybdate/Al(III) composite films on steel and zinc-plated steel by chemical conversion, Corros. Sci. 44 (2002) 1889-1900. 59.Y.K. Song, F. Mansfeld, Development of a Molybdate-Phosphate-Silane-Silicate (MPSS) coating process for electrogalvanized steel, Corros. Sci. 48 (2006) 154-164. 60.D. Bienstock, J.H. Field, Corrosion 17 (1961) 87-90. 61.B.R.W. Hinton, Met. Finish. 89 (1991) 55-61. 62.H. Guan, R.G. Buchheit, Corrosion Protection of Aluminum Alloy 2024-T3 by Vanadate Conversion Coatings, Corrosion (Houston). 60 (2004) 284-296. 63.K.H. Yang, M.D. Ger, W.H. Hwu, Y. Sung, Y.C. Liu, Study of vanadium-based chemical conversion coating on the corrosion resistance of magnesium alloy, Mater. Chem. Phy. 101 (2007) 480–485. 64.楊光絢,AZ31鎂合金釩酸鹽化成處理研究,國防大學博士論文,95年11月。 65.M. Iannuzzi, T. Young, G. S. Frankel, Aluminum alloy corrosion inhibition by vanadates, J. Electrochem. Soc., 153 (2006) B533-B541. 66.M. Iannuzzi, G. S. Frankel, Mechanisms of corrosion inhibition of AA2024-T3 by vanadates, Corros. Sci. 49 (2007) 2371-2391. 67.K. D. Ralston, S. Chrisanti, T. L. Young, R. G. Buchheit, Corrosion Inhibition of Aluminum Alloy 2024-T3 by Aqueous Vanadium Species, J. Electrochem. Soc. 155 (2008) C350-C359. 68.Z. Zou, N. Li, D. Li, H, Liu, S. Mu, journal of alloys and compounds, 509 (2011) 503. 69.K. Aramaki, Treatment of zinc surface with cerium(III) nitrate to prevent zinc corrosion in aerated 0.5 M NaCl, Corros. Sci. 43 (2001) 2201-2215. 70.K. Aramaki, Prevention of zinc corrosion in oxygenated 0.5M NaCl by treatment in a cerium(III) nitrate solution and modification with sodium hexadecanoate, Corros. Sci. 48 (2006) 3298-3308. 71.K. Aramaki, Protection of zinc from corrosion by coverage with a hydrated cerium(III) oxide layer and ultrathin polymer films of a carboxylate self-assembled monolayer modified with alkyltriethoxysilanes, Corros. Sci. 49 (2007) 1963-1980. 72.M.F. Montemor, A.M. Simoes, M.G.S. Ferreira, Composition and behaviour of cerium films on galvanised steel, Prog. in Org. Coat. 43 (2001) 274-281. 73.A.M. Cabral, W. Trabelsi, R. Serra, M.F. Montemor, M.L. Zheludkevich, M.G.S. Ferreira, The corrosion resistance of hot dip galvanised steel and AA2024-T3 pre-treated with bis-[triethoxysilylpropyl] tetrasulfide solutions doped with Ce(NO3)3, Corros. Sci. 48 (2006) 3740-3758. 74.S. Dalbin, G. Maurin, R.P. Nogueira, J. Persello, N. Pommier, Silica-based coating for corrosion protection of electrogalvanized steel, Surf. Coat. Technol. 194 (2005) 363-371. 75.S.P. Kumaraguru, B. Veeraraghavan, B.N. Popov, Development of an electroless method to deposit corrosion-resistance silicate layers on metallic substrates, J. Electrochem. Soc. 153 (2006) B253-B259. 76.C.G. da Silva, A.N. Correia, P. de Lima-Neto, I.C.P. Margarit, O.R. Mattos, Stuty of conversion coatings obtained from tungstate-phosphoric acid solutions, Corros. Sci. 47 (2005) 709-722. 77.C. Schonbein, Annln Phys.37 (1836) 390. 78.H.H. Uhlig, Passivity in metals and alloys, Corros. Sci. 19 (1979) 777-791. 79.N. Sato, G. Okamoto, Electrochemical passivation of metals, in Comprehensive Treatise of Electrochemistry, vol 4, p.193, CRC press, New York, 1981 80.程子萍,金屬材料鈍化現象之交流阻抗研究,成功大學博士論文,79年。 81.M. Pourbaix, Atlas of Electrochemical Equilibria in Aqueous Solutions, National Association of Corrosion Engineers, Houston, Texas, USA, 1974. 82.張恆壽,塗膜於預塗鋼捲上的應用,塗膜應用技術研討會,中國材料年會,98年7月23號,台灣高雄。 83.E. Szczurek, M. Dubar, R. Deltombe, A. Dubois, L. Dubar, New approach to the evaluation of the free surface position in roll coating, J. Mater. Proce. Tech. 209 (2009) 3187-3197. 84.K. Aramaki, Self-healing mechanism of a protective film prepared on a Ce(NO3)3-pretreated zinc electrode by modification with Zn(NO3)2 and Na3PO4, Corros. Sci. 45 (2003) 1085-1101. 85.E.L. Stiefel, Molybdenum compounds, Kirk-Othmer Encyclopedia of Chemical Technology, vol 17, p.19, John Wiley & Sons Inc. press, New York, 2005 86.C.F. Baes, R.E. Mesmer, The Hydrolysis of Cations, Robert E. Krieger Publishing Co., Melbourne, 1986. 87.K. Post, R.G. Robins, Thermodynamic diagrams for the vanadium-water system at 298.15K, Electrochim. Acta 21 (1976) 401-405. 88.J. Livage, Sol-gel chemistry and electrochemical properties of vanadium oxide gels, Solid State Ionics, 86-88 (1996) 935-942. 89.陳黼澤,替代六價鉻製程研究,台灣大學博士論文,98年11月。 90.ASTM B 117-03, Standard Practice for Operating Salt Spray (Fog) Apparatus, American Society for Testing and Materials, ASTM International, Philadelphia, USA, 2003. 91.ASTM D 610-08, Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces, American Society for Testing and Materials, ASTM International, Philadelphia, USA, 2003. 92.R.E. Reed-hill, R. Abbaschian, Physical metallurgy principles, 3th edition, PWS Publishing Company press, Florida, USA, 1994. 93.JCPDS 77-1297 Ref: A. Kawahara, K. Gan, Sci. Pap. Coll. Gen. Educ. Univ. Tokyo, 22 (1972) 137. 94.JCPDS 89-1562 Ref: S. Haussuhl, B. Middendorf, M. Dorffel, J. Solid State chem. 93 (1991) 9-16. 95.C. Cachet, F. Ganne, G. Maurin, J. Petitjean, V. Vivier, R. Wiart, EIS investigation of zinc dissolution in aerated sulfate medium. Part I: bulk zinc, Electrochim. Acta 47 (2001) 509-518. 96.C. Cachet, F. Ganne, S. Joiret, G. Maurin, J. Petitjean, V. Vivier, R. Wiart, EIS investigation of zinc dissolution in aerated sulfate medium. Part II: zinc coatings, Electrochim. Acta 47 (2002) 3409-3422. 97.T.S.N.S. Narayanan, S. Jegannathan, K. Ravichandran, Corrosion resistance of phosphate coatings obtained by cathodic electrochemical treatment: Role of anode — graphite versus steel, Prog. in Org. Coat. 55 (2006) 355-362. 98.S. Jegannathan, T.S.N.S. Narayanan, K. Ravichandran, S. Rajeswari, Performance of zinc phosphate coatings obtained by cathodic electrochemical treatment in accelerated corrosion tests, Electrochim. Acta 51 (2005) 247-256. 99.文念慈、程偉堃、葛明德,電化學分析技術於金屬化成處理之應用研究,鎂合金產業通訊,42期,2008年,32-39。 100.J. Flis,Y. Tobiyama, K. Mochizuki, C. Shiga, Characterisation of phosphate coatings on zinc, zinc-nickel and mild steel by impedance measurements in dilute sodium phosphate solutions, Corros. Sci. 39 (1997) 1757-1770. 101.W. Tato, D. Landolt, Electrochemical determination of the porosity of single and duplex PVD coatings of titanium and titanium nitride on brass, J. Electrochem. Soc. 145 (1998) 4173-4181. 102.S.H. Ahn, J.H. Yoo, J.G. Kim, J.G. Han, On the corrosion behavior of multilayered WC-Ti1-xAlxN coatings on AISI D2 steel, Surf. Coat. Technol. 163-164 (2003) 611-619. 103.I. Campos, M. Palomar-Pardave, A. Amador, C. Villa Velazquez, J. Hadad, Corrosion behavior of boride layers evaluated by the EIS technique, Appl. Surf. Sci. 253 (2007) 9061-9066. 104.S. Maeda, M. Yamamoto, The role of chromate treatment after phosphating in paint adhesion, Prog. in Org. Coat. 33 (1998) 83-89. 105.Y. Song, D. Shan, R. Chen, F. Zhang, E.H. Han, A novel phosphate conversion film on Mg-8.8Li alloy, Surf. Coat. Technol. 203 (2009) 1107-1113. 106.C.D. Wagner, W.M. Riggs, L.E. Davies, J.F. Moulder, G.E. Muilenberg, Handbook of Photo-electron Spectroscopy, Perkin Elmer Corporation, Physical Electronics Division, Eden Prairic, Minnesota, USA, 1979. 107.J.F. Moulder, W.F. Stickle, P.E. Sobol, K.D. Bomben, Handbook of X-ray Photoelectron Spectroscopy, Physical Electronics Inc., Minnesota, USA, 1992. 108.A.K. Bairamow, S. Zakipour, C. Leygraf, An XPS investigation of dichromate and molybdate inhibitors on aluminum, Corros. Sci. 25 (1985) 69-73. 109.M.A. Deyab, S.S.A. El-Rehim, Inhibitory effect of tungstate, molybdate and nitrite ions on the carbon steel pitting corrosion in alkaline formation water containing Cl- ion, Electrochim. Acta 53 (2007) 1754-1760. 110.莊東漢,材料破損分析,五南書局,96年3月。 111.C.P. Lee, C.C. Chang, Y.Y. Chen, J.W. Yeh, H.C. Shih, Effect of the aluminium content of AlxCrFe1.5MnNi0.5 high-entropy alloys on the corrosion behaviour in aqueous environments, Corros. Sci. 50 (2008) 2053-2060. 112.D.R. Lide, Handbook of Chemistry and Physics, 88th edition, CRC press, Florida, USA, 2007-2008. 113.Y. Arnaud, E. Sahakian, M. Romand, Study of hopeite coatings I. Pure hopeite thermal dehydration: dihydrate, Zn3(PO4)2.2H2O, structure conformation, Appl. Surf. Sci. 32 (1988) 281-295. 114.Y. Arnaud, E. Sahakian, J. Lenoir, A. Roche, Study of hopeite coatings II. Study of polycationic hopeites: structure and dehydration process, Appl. Surf. Sci. 32 (1988) 296-308. 115.M.M.E. de Backer, S. Mcsweeney, P.F. Lindley, E. Hough, Ligand-binding and metal-exchange crystallographic studies on shrimp alkaline phosphatase, Acta. Cryst. D60 (2004) 1555-1561. 116.L. Pauling, The Nature of the Chemical Bond, Cornell Univ. Press. Ithaca, New York, USA, 1960. 117.P.E. Tegehall, N.G. Vannerberg, Nucleation and formation of zinc phosphate conversion coating on cold-rolled steel, Corros. Sci. 32 (1991) 635-652. 118.X. Zhou, C. Wei, M. Li, S. Qiu, X. Li, Thermodynamics of vanadium-sulfur-water systems at 298 K, Hydrometallurgy 106 (2011) 104-112 119.C.L. Yaws, Yaws' Handbook of Thermodynamic Properties for Hydrocarbons and Chemicals, Knovel Press, USA, 2009. 120.X. Liu, T. Zhang, Y. Shao, G. Meng, F. Wang, Effect of alternating voltage treatment on the microstructure and corrosion resistance of stannate conversion coating on AZ91D alloy, Corros. Sci. 51 (2009) 2685-2693. 121.W. Trabelsi, P. Cecilio, M.G.S. Ferreira, M.F. Montemor, Electrochemical assessment of the self-healing properties of Ce-doped silane solutions for the pre-treatment of galvanized steel substrates, Prog. in Org. Coat. 54 (2005) 276-284. 122.W. Trabelsi, E. Triki, L. Dhouibi, M.G.S. Ferreira, M.L. Zheludkevich, M.F. Montemor, The use of pre-treatments based on doped silane solutions for improved corrosion resistance of galvanized steel substrates, Surf. Coat. Technol. 200 (2006) 4240-4250. 123.S.H. Ahn, J.H. Hong, J.G. Kim, J.G. Han, Effect of microstructure on corrosion behavior of TiN hard coatings produced by a modified two-grid attachment magnetron sputtering process, Thin Solid Films 515 (2007) 6878-6883. 124.S.H. Ahn, Y.S. Choi, J.G. Kim, J.G. Han, A study on corrosion resistance characteristic of PVD Cr-N coated steels by electrochemical method, Surf. Coat. Technol. 150 (2002) 319-326. 125.C. Liu, Q. Bi, A. Leyland, A. Matthews, An electrochemical impedance spectroscopy study of the corrosion behaviour of PVD coated steels in 0.5 N NaCl aqueous solution: Part I. Establishment of equivalent circuits for EIS data modeling, Corros. Sci. 45 (2003) 1243-1256. 126.C. Liu, Q. Bi, A. Matthews, EIS comparison on corrosion performance of PVD TiN and CrN coated mild steel in 0.5 N NaCl aqueous solution, Corros. Sci. 43 (2001) 1953-1961. 127.G. Goeminne, H. Terryn, J. Vereeken, EIS study of the influence of aluminium etching on the growth of chromium prhosphate conversion layers, Electrochim. Acta 43 (1998) 1829-1838. 128.C. Liu, Q. Bi, A. Leyland, A. Matthews, An electrochemical impedance spectroscopy study of the corrosion behaviour of PVD coated steels in 0.5 N NaCl aqueous solution: Part II.: EIS interpretation of corrosion behaviour, Corros. Sci. 45 (2003) 1257-1273. 129.M.F. Montemor, W. Trabelsi, M. Zheludevich, M.G.S. Ferreira, Modification of bis-silane solutions with rare-earth cations for improved corrosion protection of galvanized steel substrates, Prog. in Org. Coat. 57 (2006) 67-77. 130.M.F. Montemor, M.G.S. Ferreira, Electrochemical study of modified bis-[triethoxysilylpropyl tetrasulfide silane films applied on the AZ31 Mg alloy, Electrochim. Acta 52 (2007) 7486-7495. 131.M.F. Montemor, M.G.S. Ferreira, Cerium activated nanoparticles as fillers for silane films: Evaluation of the corrosion inhibition performance on galvanized steel substrate, Electrochim. Acta 52 (2007) 6976-6987. 132.M.F. Montemor, W. Trabelsi, S.V. Lamaka, K.A. Yasakau, M.L. Zheludevich, A.C. Bastos, M.G.S. Ferreira, The synergistic combination of bis-silane and CeO2-ZrO2 nanoparticles on the electrochemical behaviour of galvanised steel in NaCl solutions, Electrochim. Acta 53 (2008) 5913-5922. 133.R. Pinto, M.G.S. Ferreira, M.J. Carmezim, M.F. Montemor, The corrosion behaviour of rare-earth containing magnesium alloys in borate buffer solution, Electrochim. Acta 56 (2011) 1535-1545. 134.P. Campestrini, E.P.M. van Westing, J.H.W. de Wit, Influence of surface preparation on performance of chromate conversion coatings on Alclad 2024 aluminium alloy Part II: EIS investigation, Electrochim. Acta 46 (2001) 2631-2647. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/34484 | - |
dc.description.abstract | 熱浸鍍鋅鋼板(GI steel)廣泛應用於汽車、家電及建築等領域,為了提升鍍鋅層於貯存及運送時之抗蝕性,通常會先針對鍍鋅層施以鉻酸鹽(六價鉻)鈍化處理。六價鉻鈍化膜除了提供優良之障蔽保護(Barrier protection)外,同時亦具有自我癒合能力(self- healing ability)。然而,六價鉻具有致癌性,同時嚴重污染生態環境,目前已嚴格限用。本研究以輥塗型商用六價鉻皮膜(中鋼G5304鈍化液)為對照組,開發在防蝕及自我癒合保護機制與六價鉻皮膜相近的非鉻型皮膜。首先以浸泡製程(immersion process)對GI鋼板進行磷酸鹽處理,接著使用皮膜抗蝕性較佳之磷酸鹽系統,搭配鉬酸鹽及釩酸鹽系統以兩道次及單道次輥塗製程(roll coating process)對GI鋼板進行鈍化處理。研究結果顯示,當磷酸鹽溶液中含有鎂離子時,浸泡型磷酸鹽皮膜是由結晶型之磷酸鋅/磷酸鋅鎂混合物所構成。而提升溶液中鎂離子的濃度,可有效減小浸泡型磷酸鹽皮膜晶粒大小及降低整體皮膜孔隙率,故進而提升皮膜之抗蝕性。輥塗型單道次磷酸鹽皮膜是由非晶型之磷酸鋅/磷酸鋅鎂、氫氧化鋅所構成,其經過鉬酸鹽或釩酸鹽後處理之後,新生成許多球狀皮膜,故後處理液可藉由生成球狀皮膜來修補磷酸鹽皮膜之缺陷,並將磷酸二氫根、磷酸氫根及(四價氧化鉬及六價鉬酸根)或(四價氧化釩與五價釩酸根)併入於皮膜中,故皮膜抗蝕性及自我癒合能力獲得提升。相較於輥塗型兩道次磷酸鹽/鉬酸鹽皮膜,輥塗型兩道次磷酸鹽/釩酸鹽皮膜由於缺陷量較少(球狀皮膜密度較高)且併入較高含量之具較低溶解度氧化物(V2O4)及具較強氧化力的釩酸根,故其抗蝕性及自我癒合能力皆較佳。輥塗型單道次磷酸鹽(鉬酸鹽)皮膜及輥塗型單道次磷酸鹽(釩酸鹽)皮膜是由非晶型之由磷酸鋅/磷酸鋅鎂、氫氧化鋅、磷酸二氫根、磷酸氫根及(四價氧化鉬及六價鉬酸根)或(四價氧化釩與五價釩酸根)所構成,而其抗蝕性及自我癒合能力皆較輥塗型單道次磷酸鹽皮膜優異。相較於輥塗型單道次磷酸鹽(鉬酸鹽)皮膜,輥塗型單道次磷酸鹽(釩酸鹽)皮膜厚度較厚且併入較高含量之具較低溶解度氧化物(V2O4)及具較強氧化力的釩酸根,故其抗蝕性及自我癒合能力皆較佳。相較於鉬酸鹽後處理或添加劑,釩酸鹽後處理或添加劑皆賦予輥塗型磷酸鹽皮膜較佳之抗蝕能力及自我癒合能力,而其中又以釩酸鹽後處理之效果最佳。而相較於其他非鉻型皮膜[輥塗型單道次磷酸鹽(釩酸鹽)皮膜、輥塗型兩道次磷酸鹽/鉬酸鹽皮膜、輥塗型單道次磷酸鹽(鉬酸鹽)皮膜],輥塗型兩道次磷酸鹽/釩酸鹽皮膜具有較低之缺陷量(較高密度之球狀皮膜),故其具有較佳之障蔽保護功能(抗蝕性),此外,併入較高含量之具較強氧化力的高價數金屬離子(五價釩酸根)亦賦予皮膜較佳之自我癒合能力,而提高釩酸鹽後處理液之釩酸根濃度(原來之兩倍)可製備抗蝕能力及自我癒合能力與鉻酸鹽皮膜相近之兩道次非鉻型皮膜。 | zh_TW |
dc.description.abstract | Hot-dip galvanized steel (GI steel) is widely applied to automobile, electrical appliance and construction fields. To protect Zn coating against corrosion during transportation and storage, hexavalent Cr treatment is generally adopted. Hexavalent Cr coating provides superior barrier layer protection and self-healing protection. However, a strict restriction was imposed on the use of chromate passivation because of the toxicity of hexavalent Cr. Therefore, non-chromate treatments have received an ever-increasing attention. The purpose of this study is to develop a roll coating non-chromate passivation treatment for GI steel (commercial roll chromate passive coating as comparison). This study prior investigated the phosphate treatment for GI steel by immersion coating process. Then, the composite phosphate, molybdate and vanadate treatment for GI steel conducted by two-step and one-step roll coating process were explored. Results showed that the presence of Mg2+ in the phosphate solution, the phosphate coating prepared by immersion coating process was composed of mixed Zn phosphate hydrate and (Zn, Mg) phosphate hydrate with high degree of crystallinity. Elevating Mg2+ in the solution markedly reduced the phosphate grain size and increased the population density of the phosphate grains. As a result, the porosity of the phosphate coating was reduced with increasing solution Mg2+, which, in turn, improved the corrosion resistance of the coating. The one-step roll phosphate coating was porous, amorphous and was composed of mixed Zn phosphate/(Zn, Mg) phosphate and Zn(OH)2. The one-step roll phosphate coating underwent the molybdate or vanadate post treatment, the defects of the phosphate coating were mainly repaired and the incorporation of (H2PO4-, HPO42-) and (MoO2, MoO42-) or [V2O4 , V10O27(OH)5−, V10O286− …] was also detected. As a result, the corrosion resistance and self-healing ability of the coating were both improved. Compared to the two-step roll phosphate/molybdate coating, the two-step roll phosphate/vanadate coating had a better corrosion resistance and self-healing ability was owing to a less amount of the defects (more spherical particles) present in the coating, higher content of low-valent oxide with lower solubility (V2O4) and high-valent anion with greater oxidizing power [V10O27(OH)5−, V10O286− …] incorporated into the coating. The one-step roll phosphate(molybdate) coating and phosphate(vanadate) coating are both porous, amorphous and were composed of mixed Zn phosphate/(Zn, Mg) phosphate, Zn(OH)2, (H2PO4-, HPO42-) and (MoO2, MoO42-,) or [V2O4 , V10O26(OH)24-, V10O27(OH)5-...] and they showed a better corrosion resistance and self-healing ability than those of the one-step roll phosphate coating. Compared to the one-step roll phosphate(molybdate) coating, the one-step roll phosphate(vanadate) coating displayed a better corrosion resistance and self-healing ability was owing to a higher content of low-valent oxide with lower solubility (V2O4) and high-valent anion with greater oxidizing power [V10O26(OH)24-, V10O27(OH)5-...] incorporated in the relatively-thick coating. Compared with the molybdate post treatment or additives, vanadate post treatment or additives rendered a better corrosion resistance and self-healing ability of the phosphate coating, vanadate post treatment especially. Among the roll coating non-chromate passivation treatment (the two-step roll phosphate/vanadate, the one-step roll phosphate(vanadate), the two-step roll phosphate/molybdate, the one-step roll phosphate(molybdate), the two-step roll phosphate/vanadate demonstrated the best corrosion resistance was due to a less amount of the defects (more spherical particles) present in the coating. Besides, a higher content of high-valent anion with greater oxidizing power [V10O27(OH)5−, V10O286− …] incorporated into the coating contributed the best self-healing ability of the two-step roll phosphate/vanadate coating. Morover, elevating the concentration of [V10O27(OH)5−, V10O286− …] in the post solution rendered a similar corrosion protection and self-healing ability of the two-step roll phosphate/2vanadate coating as compared to those of commercial roll chromate coating. | en |
dc.description.provenance | Made available in DSpace on 2021-06-13T06:10:58Z (GMT). No. of bitstreams: 1 ntu-100-D96527016-1.pdf: 9887347 bytes, checksum: a60a2076f58d757777322ab00106490a (MD5) Previous issue date: 2011 | en |
dc.description.tableofcontents | 目錄
封面內頁 口試委員會審定書i 誌謝ii 中文摘要iii Abstractv 目錄vii 圖目錄xii 表目錄xix 第一章 緒論1 1-1前言1 1-2 文獻回顧2 1-2-1 鈍化現象2 1-2-2 鋅-水之波貝克圖3 1-2-3 鈍化處理製程4 1-2-4 鈍化膜之性質7 1-2-5 各類型的鈍化處理液8 1-2-5-1 鉻酸鹽處理8 1-2-5-2磷酸鹽處理13 1-2-5-3 鉬酸鹽處理17 1-2-5-4 釩酸鹽處理20 1-3 研究目的與策略25 第二章 實驗步驟28 2-1 鈍化處理28 2-1-1 添加鎂離子對於浸泡型磷酸鹽皮膜的影響28 2-1-2 鉬酸鹽、釩酸鹽後處理對輥塗型磷酸鹽皮膜的影響29 2-1-3 鉬酸鹽、釩酸鹽添加劑對輥塗型磷酸鹽皮膜的影響30 2-2 皮膜微結構及化學組成分析30 2-3 皮膜抗蝕性量測34 2-4 皮膜自我癒合能力量測35 2-4-1 鹽霧試驗/X型刮痕法35 2-4-2 循環陽極極化曲線35 2-4-3 EIS/模擬刮痕槽分析法35 第三章 實驗結果38 3-1 添加鎂離子對於浸泡型磷酸鹽皮膜的影響38 3-1-1 SEM表面形貌觀察及皮膜晶粒大小、密度量測38 3-1-2 SEM橫截面觀察42 3-1-3 TEM橫截面觀察43 3-1-4 XRD分析45 3-1-5 極化曲線分析48 3-1-6 EIS分析50 3-1-7 鹽霧試驗53 3-1-8 輥塗型磷酸鹽皮膜之抗蝕性55 3-2 鉬酸鹽、釩酸鹽後處理對輥塗型磷酸鹽皮膜的影響56 3-2-1 SEM表面形貌觀察56 3-2-2 TEM橫截面觀察61 3-2-3 XPS分析66 3-2-4 極化曲線分析71 3-2-5 EIS分析72 3-2-6 鹽霧試驗76 3-2-7 自我癒合能力量測與分析78 3-2-7-1 鹽霧試驗/X型刮痕法78 3-2-7-2 循環陽極極化曲線84 3-2-7-3 EIS/模擬刮痕槽分析法86 3-3 鉬酸鹽、釩酸鹽添加劑對輥塗型磷酸鹽皮膜的影響88 3-3-1 SEM表面形貌觀察88 3-3-2 TEM橫截面觀察91 3-3-3 XPS分析93 3-3-4 極化曲線分析97 3-3-5 EIS分析98 3-3-6 鹽霧試驗101 3-3-7 自我癒合能力量測與分析103 3-3-7-1 鹽霧試驗/X型刮痕法103 3-3-7-2 循環陽極極化曲線106 3-3-7-3 EIS/模擬刮痕槽分析法107 第四章 討論109 4-1 添加鎂離子對於浸泡型磷酸鹽皮膜的影響109 4-1-1 皮膜之成膜機構109 4-1-2 皮膜之抗蝕機制111 4-2 鉬酸鹽、釩酸鹽後處理對輥塗型磷酸鹽皮膜的影響112 4-2-1 皮膜之成膜機構112 4-2-2 皮膜之抗蝕機制117 4-2-3 皮膜之自我癒合保護機制122 4-3 鉬酸鹽、釩酸鹽添加劑對輥塗型磷酸鹽皮膜的影響126 4-3-1 皮膜之成膜機構126 4-3-2 皮膜之抗蝕機制129 4-3-3 皮膜之自我癒合保護機制132 4-4 綜合討論134 第五章 結論146 參考文獻150 | |
dc.language.iso | zh-TW | |
dc.title | 熱浸鍍鋅鋼板之磷酸鹽、鉬酸鹽與釩酸鹽
複合鈍化處理 | zh_TW |
dc.title | Phosphate, Molybdate and Vanadate Composite Passivation Treatment for Hot-dip Galvanized Steel | en |
dc.type | Thesis | |
dc.date.schoolyear | 99-2 | |
dc.description.degree | 博士 | |
dc.contributor.oralexamcommittee | 蔡文達(Wen-Ta Tsai),林景崎(Jing-Chie Lin),葛明德(Ming-Der Ger),汪俊延(Jun-Yen Uan),陳蓓莉(Pei-Li Chen) | |
dc.subject.keyword | 熱浸鍍鋅鋼板,磷酸鹽,鉬酸鹽,釩酸鹽,鈍化處理,抗蝕性,自我癒合能力, | zh_TW |
dc.subject.keyword | Hot-dip galvanized steel,phosphate,molybdate,vanadate,passivation,corrosion resistance,self-healing ability, | en |
dc.relation.page | 163 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2011-07-26 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-100-1.pdf 目前未授權公開取用 | 9.66 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。