請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/33584
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 黃秉鈞(Bin-Juine Huang) | |
dc.contributor.author | Wei-Che Tung | en |
dc.contributor.author | 童偉哲 | zh_TW |
dc.date.accessioned | 2021-06-13T04:48:45Z | - |
dc.date.available | 2014-07-01 | |
dc.date.copyright | 2011-08-04 | |
dc.date.issued | 2011 | |
dc.date.submitted | 2011-07-27 | |
dc.identifier.citation | 【1】 經濟部能源局,2010 能源產業技術白皮書,2010
【2】 黃秉鈞,行政院國家科學委員會專題研究計畫成果報告,具可變結構動力系統之開關控制器設計,民國81年1月 【3】 M. Kovarik and P. F. Lesse, Optimal control of flow in low temperature solar heat collector, Solar Energy, Vol. 18, pp. 431-435(1976) 【4】 K. H. Hussein, 1EE ploc.-Gener. Transm. Distrib., Vol. 142, No. I, Maximum photovoltaic power tracking: an algorithm for rapidly changing atmospheric conditions, 1995 【5】 ASHRAE Equipment Handbook, Stream jet refrigeration equipment, US(1979) 13.1-13.6 【6】 B.J. Huang, C.B. Jiang, F.L. Hu, Ejector performance characteristics and design analysis of jet refrigeration system, ASME J. Gas Turbine and Power 107 (1985) 792-802. 【7】 B.J. Huang, J.M. Chang, Empirical correlation of ejector design, Int. J. Refrigeration 22 (1999) 379-388. 【8】 B.J. Huang, J.M. Chang, C.P. Wang, V.A. Petrenko, A 1-D analysis of ejector performance, Int. J. Refrigeration 22 (1999) 354-364. 【9】 張俊民,噴射式冷氣系統之研究,台灣大學機械系博士論文,1998 【10】 黃秉鈞,系統識別講義,民國98年2月 【11】 M. Sokolov, D. Hershgal, Enhanced ejector refrigeration cycles powered by low grade heat. Part 1. Systems characterization, Int. J. Refrigeration 12 (1990) 351-356. 【12】 M. Sokolov, D. Hershgal, Enhanced ejector refrigeration cycles powered by low grade heat. Part 2. Design procedures, Int. J. Refrigeration 12 (1990) 357-363. 【13】 M. Sokolov, D. Hershgal, Enhanced ejector refrigeration cycles powered by low grade heat. Part 3. Experimental results, Int. J. Refrigeration 14 (1991) 24-31. 【14】 B.J. Huang, V.A. Petrenko, J.M. Chang, C.P. Lin, S.S. Hu, A combined-cycle refrigeration system using ejector-cooling cycle as the bottom cycle, Int. J. Refrigeration 24 (2001) 391-399. 【15】 B.J. Huang, J.H. Wu, H.Y. Hsu, J.H. Wang, Development of Hybrid Solar-assisted Cooling/Heating System, Accepted for publication in Energy Conversion and Management, 2009. 【16】 吳佳鴻,噴射式太陽能輔助熱泵製冷供熱系統研究,台灣大學機械系博士論文,2010 【17】 汪金華,熱能輔助熱泵製冷供熱系統研究,台大機械系博士論文(2008)。 【18】 黃文雄,太陽能之應用及理論,民國89年8月 【19】 V. Humberto, C. Sergio, S. P. Guilherme dos, Modelling and hourly simulation of a solar ejector cooling system, Applied Thermal Engineering 26 (2006) 663-672. 【20】 P. Wimolsiri, L. Per, A year-round simulation of a solar-driven ejector refrigeration system with iso-butane as a refrigerant, Int. J. Refrigeration 30 (2007) 840-850. 【21】 B.J. Huang, V.A. Petrenko, I.Y. Samofatov, N.A. Shchetinina, Collector selection for solar ejector cooling system, Solar Energy 71 (2001) 269-274 【22】 許晃源,採用變頻循環泵浦之液位控制技術,台灣大學機械系碩士論文,2009 【23】 B.J. Huang, C.W. Yen , J.H. Wu, J.H. Liu, H.Y. Hsu, V.O. Petrenko, J.M. Chang, C.W. Lu, Optimal control and performance test of solar-assisted cooling system, Applied Thermal Engineering 30 (2010) 2243-2252 【24】 吳國光、張育誠,太陽能熱水器優缺點剖析,工研院能環所能源報導 【25】 劉人豪,太陽能輔助氣冷式噴射式製冷系統性能最佳化研究,台灣大學機械系碩士論文,2010 【26】 胡勝雄,先進噴射式製冷系統研發,台灣大學機械系博士論文,2005 | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/33584 | - |
dc.description.abstract | 噴射式製冷系統可由太陽能集熱系統提供熱能,並由水冷式冷凝器散熱,然而週邊耗電過多往往導致系統運轉效能降低,故本研究探討最佳效率點追蹤控制技術以提高噴射式製冷系統運用價值。
傳統強制型太陽能集熱系統常依據標準設計流量選擇泵浦規格,此舉可能造成電能浪費。為了妥善控制泵浦以提升系統效能,本研究提出一個價值函數,並利用擾動觀察法控制實驗證明其存在最大值。然而太陽能集熱器屬於熱流系統存在動態響應問題,本研究先建立集熱系統動態模型,並設計最佳效率點追蹤控制系統。實驗結果證明在追蹤控制器操作下,太陽能集熱系統運轉效能可達125.7,泵浦可省能 78.2%。 由於噴射式製冷系統性能(COPECS)較低,冷凝器散熱量偏高,以至於冷卻塔風扇必須消耗許多電力,本研究依據噴射器性能特性,設計冷卻塔風扇最佳化追蹤控制系統。由實驗結果證明在冷卻塔最佳化控制器操作下,噴射式製冷系統性能(COPECS)可提升23.6 %,風扇耗電可降低至100 W。本研究更進一步整合太陽能輔助噴射式製冷系統於最佳效率點追蹤控制下,總運轉效能(COPe)可達4.5,有效提高應用價值。 | zh_TW |
dc.description.abstract | The ejector cooling system (ECS) could be driven by absorbing heat energy from solar heating system and dissipated heat by water-cooled condenser. However, the power consumption of peripheral equipments is too high to decrease system operating performance. In this study, the optimal performance point tracking control technique is investigated to increase ECS’s application worth.
Traditional forced circulation solar heating system chose the specification of pump according to the standard flow rate. This may result in waste of electricity energy. In order to properly controling the pump and increasing the system performance ,the study attends to proposing a cost function which would be proved existing maximum value by step-up-step-down control test. But the solar collector is a kind of thermal system which existing a problem of dynamic response. At the first, the study finds the system dynamic model, and then designs the optimal performance point tracking control system. The field test results show that the solar heating system’s coefficient of performance could attain 125.7 and save 78.2 % of pump power consumption. Because the lower COPECS of ECS, the cooling capacity of condenser must be higher, the cooling tower’s fan must consume more electricity power. According to ejector performance property, the study attends to design the optimal control system of cooling tower’s fan. The field test results show that the COPECS could be increased 23.6 % and fan’s power consumption could be reduced to 100 W. Finally, the study integrates the solar assist ejector cooling system with optimal performance point tracking control system. The field test result shows the entire electricity performance, COPe, could attaind 4.5. It effectively increases the application value. | en |
dc.description.provenance | Made available in DSpace on 2021-06-13T04:48:45Z (GMT). No. of bitstreams: 1 ntu-100-R98522823-1.pdf: 7511969 bytes, checksum: 5951f93a88722bb246649e66564758f2 (MD5) Previous issue date: 2011 | en |
dc.description.tableofcontents | 誌謝 I
摘 要 II Abstract III 目錄 V 表目錄 VIII 圖目錄 IX 符號說明 XIV 第一章 緒論 1 1.1 研究動機 1 1.2 文獻回顧 3 1.2.1 最大功率點控制設計研究 3 1.2.2 噴射器原理與製冷系統設計 5 1.2.3 噴射式製冷系統與空調機結合之複合式系統 10 1.2.4 太陽能輔助之噴射式製冷技術 14 1.3 研究內容 18 第二章 太陽能輔助水冷式噴射式製冷系統設計 20 2.1 太陽能集熱系統硬體設計 20 2.2 噴射式製冷系統硬體設計 28 2.2.1 噴射器 30 2.2.2 產生器、冷媒循環泵浦與儲液桶 31 2.2.3 膨脹閥 34 2.2.4 中間冷卻器 35 2.2.5 水冷式冷凝器 36 2.3 變頻空調系統與冷房 39 2.4 太陽能輔助水冷式噴射製冷系統之監控系統設計 41 第三章 太陽能集熱系統最佳效率點追蹤控制研究 43 3.1 太陽能集熱系統最佳效率點研究 43 3.1.1 價值函數定義 43 3.1.2 擾動觀察法追蹤最佳價值函數 45 3.1.3 實驗測試與分析 47 3.2 太陽能集熱系統動態模型識別 53 3.2.1 太陽能集熱器動態模型推導 53 3.2.2 太陽能集熱系統動態模型參數系統識別 59 3.2.3 集熱器性能參數測定 62 3.2.4 動態模型線性化推導 67 3.3 最佳效率點追蹤控制系統建構 69 3.3.1 低通濾波器設計 69 3.3.2 最佳效率點追蹤計算模型 71 3.3.3 最佳效率點追蹤回授控制系統設計 74 3.4 太陽能集熱系統最佳效率點追蹤實驗結果 77 第四章 噴射式製冷系統冷卻塔最佳效率點追蹤控制研究 83 4.1 噴射式製冷系統冷凝溫度最佳化原理 83 4.2 冷卻塔風扇與蒸發溫度識別 85 4.3 噴射式製冷系統冷凝溫度最佳化控制器設計 87 4.4 噴射式冷卻塔風扇控制測試結果 90 第五章 太陽能輔助噴射製冷系統之最佳效率點追蹤控制研究 93 5.1 太陽能輔助噴射製冷系統 93 5.1.1 太陽能輔助噴射製冷系統架構 93 5.1.2 太陽能輔助噴射製冷系統電能效率 96 5.2 太陽能輔助噴射製冷系統最佳操作點追蹤測試 97 5.2.1 太陽能輔助噴射製冷系統測試I 97 5.2.2 太陽能輔助噴射製冷系統測試II 100 5.2.3 太陽能輔助噴射製冷系統測試III 103 第六章 結論與未來展望 106 6.1 結論 106 6.2未來展望 107 參考文獻 108 附錄A 111 | |
dc.language.iso | zh-TW | |
dc.title | 太陽能輔助噴射製冷系統之最佳效率點追蹤控制研究 | zh_TW |
dc.title | A Study of Optimal Performance Tracking Control for Solar-Assisted Ejector Cooling System | en |
dc.type | Thesis | |
dc.date.schoolyear | 99-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 顏瑞和(Ruei-he Yen),李綱(Kang Li),王俊程(Jiun-Cheng Wang) | |
dc.subject.keyword | 太陽能,噴射式製冷,最佳效率點, | zh_TW |
dc.subject.keyword | Solar heating system,Ejector,Optimal performance, | en |
dc.relation.page | 116 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2011-07-27 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-100-1.pdf 目前未授權公開取用 | 7.34 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。