請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/33205
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 譚義績 | |
dc.contributor.author | Yu-Sheng Chen | en |
dc.contributor.author | 陳昱升 | zh_TW |
dc.date.accessioned | 2021-06-13T04:29:13Z | - |
dc.date.issued | 2006 | |
dc.date.submitted | 2006-07-20 | |
dc.identifier.citation | 1. 吳榮峰 2003,“大尺度質點影像量測法之應用-分析水面流場”,國立成功大學水利及海洋工程研究所博士論文。
2. 李明靜 2003, “河川表面流速與流量非接觸式量測方法之發展及應用”, 國立成功大學水利及海洋工程研究所博士論文。 3. 李秉融 2003, “單階自由跌水於不同尾水位之流場特性探討”, 國立中興大學土木工程研究所碩士論文。 4. 林 呈、莊仁合、謝世圳 2002,“垂直式跌水工靜水池內週期性振盪流特性之實驗探討”,中國土木水利工程學刊,Vol. 15, No. 1, pp. 107 ~ 124。 5. 邱泳仁 2001, “垂直式單階跌水工與跌水消能池之流場特性探討”, 國立中興大學土木工程研究所碩士論文。 6. 徐華勇, 2002,“應用PIV探討圓柱及平板尾流流場之速度分佈特性”,國立中興大學土木工程研究所碩士論文。 7. 陳秉義 2003,“運用數位質點顯像測速於多排交叉流電子構裝散熱系統之流場特性研究”,私立南台科技大學機械工程研究所碩士論文。 8. 陳義芳 2004, “波浪通過斜坡底床上雙列潛堤之流場研究”, 國立成功大學水利及海洋工程研究所碩士論文。 9. 彭修慶 2003, “PIV在高速高雷諾數流場量測系統之建立與應用”,國立臺灣大學工程科學與海洋工程研究所碩士論文。 10. 楊昇學 2002,“彩色質點影像測速法於瞬間潰壩流場之試驗研究”,國立交通大學土木工程研究所碩士論文。 11. 葉孟剛 2003, “三維矩型槽空穴流渦漩結構的數值探討”,國立交通大學土木工程研究所碩士論文。 12. Adrian, R. J. 1991, “Particle-image techniques for experimental fluid mechanics”, Annual review of fluid mechanics, vol.23, pp261-304. 13. Dracos, Th. 1996,“Three-dimensional velocity and vorticity measuring and image analysis techniques”, Kluwer Academic Publishers. 14. Jiang, B., Lin, T. L., Povinelli, L. A. 1994,“Large-scale computation of incompressible viscous flow by least-squares finite element method”, Comput. Methids Appl. Engrg., vol.114, pp213-231. 15. Koseff, J. R., Street, R. L. 1984a, “Visualization studies of a shear driventhree-dimensional recirculating flow”, ASME J. Fluids Engng., 106, 21-29. 16. Koseff, J. R., Street, R. L. 1984b, “The lid-driven cavity flow: a synthesis of qualitativeand quantitative observations“, ASME J. Fluids Engng., 106, 390-398. 17. Koseff, J. R., Street, R. L. 1984c, “On end wall effects in a lid-driven cavity flow”, ASME J. Fluids Engng., 106, 385-389. 18. Lo, D. C., Murugesan, K. Young, D. L. 2005,“Numerical solution of three-dimensional velocity-vorticity Navier-Stokes equations by finite difference method”, Int. J. Numer. Meth. Fluids, vol.47, pp1469-1478. 19. Migeon, C., Texier, A. & Pineau, G. 2000, “Effects of Lid-Driven Cavity shape on the flow establishment”, Journal of Fluids and Structures, 14:469-488. 20. Raffel, M. 1998,“Particle image velocimetry”: a practical guide, New York : Springer. 21. Riethmuller, M. L. 2000,“Particle Image Velocimetry and Associated Techniques”, von Karman Institute for Fluid Dynamics. 22. Shankar, P. N. 2000,“Fluid mechanics in the driven cavity”, Annual review of fluid mechanics, vol.32, pp 93-136. 23. Shu, C., Wang, L., Chew, Y. T. 2003, “Numerical computation of three dimensional incompressible Navier Stokes equations in primitive variable form by DQ method”, International Journal for Numerical Methods in Fluids, vol.43, pp345-368. 24. Tsorng, S. J. 2005,“Three-dimensional tracking of the long time trajectories of suspended particles in a lid-driven cavity flow”, Experiments in Fluids, vol.40, pp 314-328. 25. Wong, K. L., Baker, A. J. 2002,“A 3D incompressible Navier Stokes velocity vorticity weak form finite element algorithm”, International Journal for Numerical Methods in Fluids, vol. 38, pp99-123. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/33205 | - |
dc.description.abstract | 為了解魚窪地固床工內棲息空間的流場,因此將幾何邊界較複雜的魚窪地固床工,簡化成幾何邊界較簡單的多邊形模型,稱之為魚窪地固床工模型,並配合不同流況條件下,探討魚窪地固床工凹穴內漩渦流場。
本文主要應用質點影像測速儀(Particle Image Velocimetry, PIV )對一模擬魚窪地固床工之模型,於滑流與舌流流況條件下進行全域速度場之量測,在這之前,將魚窪地固床工試驗簡化成3/4孔穴流試驗,量測不同雷諾數下三維3/4孔穴流於中心對稱斷面上之二維速度場,並利用質點軌跡追蹤法將流場可視化。 模型則由透明壓克力板構成正立方體之孔穴,並於孔穴模型頂部設置傳輸皮帶構成五面為固定邊界及一面為移動邊界之封閉空間。研究中首先針對正立方體孔穴流進行雷諾數400、1000及2000之量測及流場可視化,並與前人之數值模擬結果比較,其目的為檢查模型製作是否符合要求及驗證PIV之操作與資料分析之正確性。再者修正正立方體孔穴模型為3/4孔穴流模型並於雷諾數由100至2000範圍中進行9組不同雷諾數之流場量測及分析;觀察3/4孔穴中於不同雷諾數時流場變化、漩渦結構之觀察、各漩渦之生成及其結構之幾何分析,以及當雷諾數持續增大時流場由穩態轉變非穩態時,其二維漩渦結構隨時間之震盪變化。最後探討魚窪地固床工考慮不同流況流況條件下(滑流與舌流),觀察垂直式跌水消能池與魚窪地固床工之流場特性與兩者相互之間流場比較。 | zh_TW |
dc.description.abstract | A cave at backside of vertical drop energy-dissipators is called fish refuge groundsills, which provide a shelter for fish as flood over this zone. This type cave often appears and drop flow scouring forms that. Simplified models are considered here and only flow field structures are emphasized and discussed. The flow field measurements in fish refuge groundsills are performed using Particle Image Velocimetry (PIV) in this thesis. There are three types of physical models are used for different purposes.
To ensure the correctness of PIV operations and post-process analysis, the flow fields of cubic lid-driven cavity at Re = 400, 1000 and 2000 are first carried out and compare the velocity profiles along the horizontal and vertical center lines with benchmark by numerical simulations. The flow fields in 3/4 cavity from Re = 100 to 2000 are then executed. Two phenomena are observed in series of runs: 1) the several vortices appear with this cavity due to geometry and Reynolds number changing. 2) flow field becomes unsteady as Reynolds number more than 1200. The flow field in vertical drop energy-dissipators with and without cave under skimming and napped flow conditions are finally considered. Single inflow discharge is supplied, but the skimming and napped flow conditions are created by adjusting the distance between drop and sills. For skimming flow, the vortex in the pool driven by flow skimming stretch into the fish refuge groundsills and it then occupies all area of cavity but low velocity. The variations of the horizontal velocities at various locations within fish refuge groundsills are obscure. For another case, napped flow, a stronger clockwise vortex is generated due to tailwater attaching bottom. This vortex fully extends into the fish refuge groundsills, and variations of the horizontal velocities at various locations within fish refuge groundsills are obvious relative to skimming flow. Traditional drop flow is studied for consideration of energy dissipations. These series of measurements are first handled and preliminarily performed to start for the biological problems. | en |
dc.description.provenance | Made available in DSpace on 2021-06-13T04:29:13Z (GMT). No. of bitstreams: 1 ntu-95-R93622040-1.pdf: 9687386 bytes, checksum: 7931c71fb8b50321cf3b72dff22d2f56 (MD5) Previous issue date: 2006 | en |
dc.description.tableofcontents | 中文摘要 I
Abstract II 圖錄 VII 表錄 XVIII 第一章 緒論 1 1.1 研究背景 1 1.2 研究動機 1 1.3 文獻回顧 2 1.4 研究目的 4 第二章 試驗佈置與量測儀器 5 2.1 試驗設計 5 2.2 孔穴流驗證試驗 6 2.3 3/4孔穴流試驗 8 2.4 魚窪地固床工模型試驗 9 第三章 PIV 量測系統原理 12 3.1 PIV質點影像測速儀 12 3.1.1 高速質點顯像測速系統(HPIV System) 12 3.1.2 數位質點顯像測速系統( DPIV System ) 13 3.1.3 彩色質點影像測速法(CPIV) 13 3.1.4 大尺度質點影像量測法( LSPIV ) 14 3.2 PIV 量測系統 14 3.2.1 脈衝式雷射(pulsed laser) 14 3.2.2 CCD 電子耦合攝影機 (CCD Camera) 15 3.2.3 流場可視化追蹤質點( tracers ) 16 3.2.4 影像擷取處理介面( frame grabber ) 16 3.2.5 同步控制系統 ( Synchronizer ) 16 3.2.6 控制及分析軟體( Analysis subsystem ) 17 3.3 PIV流場可視化系統佈置 18 3.4 PIV 量測系統原理 20 3.5 PIV 試驗操作與設定 25 3.6 流場質點軌跡觀察法 29 第四章孔穴流模型試驗 30 4.1 孔穴流流場結構 30 4.2 孔穴流流場分析 32 4.3 孔穴流流速剖面分析 37 第五章 3/4孔穴流模型試驗 42 5.1 3/4孔穴流特性 42 5.2 3/4孔穴流穩定流場結構 43 5.3 3/4孔穴流穩定流場流速剖面解析 52 5.4 3/4孔穴流不穩定流場結構 69 5.5 3/4孔穴流不穩定流場流速剖面解析 87 第六章魚窪地固床工試驗 108 6.1 滑流與舌流流況特性探討 108 6.2 入流流況檢定 110 6.3 滑流流場結構之結果探討 112 6.4 舌流流場結構之結果探討 117 6.5 垂直式跌水消能池與魚窪地固床工流速剖面解析 124 第七章 結論與建議 147 7.1 結論 147 7.2 建議 148 參考文獻 150 符號說明 153 附錄 154 | |
dc.language.iso | zh-TW | |
dc.title | 質點影像測速儀應用於魚窪地固床工流場之試驗及分析 | zh_TW |
dc.title | An experimental study of flow field in fish refuge groundsills using Particle Image Velocimetry techniques | en |
dc.type | Thesis | |
dc.date.schoolyear | 94-2 | |
dc.description.degree | 碩士 | |
dc.contributor.coadvisor | 賴進松 | |
dc.contributor.oralexamcommittee | 蔡長泰,張耀澤,張文鎰 | |
dc.subject.keyword | 質點影像測速儀,魚窪地固床工,漩渦結構, | zh_TW |
dc.subject.keyword | PIV,fish refuge groundsills,vortex, | en |
dc.relation.page | 166 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2006-07-21 | |
dc.contributor.author-college | 生物資源暨農學院 | zh_TW |
dc.contributor.author-dept | 生物環境系統工程學研究所 | zh_TW |
顯示於系所單位: | 生物環境系統工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-95-1.pdf 目前未授權公開取用 | 9.46 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。