Skip navigation

DSpace

機構典藏 DSpace 系統致力於保存各式數位資料(如:文字、圖片、PDF)並使其易於取用。

點此認識 DSpace
DSpace logo
English
中文
  • 瀏覽論文
    • 校院系所
    • 出版年
    • 作者
    • 標題
    • 關鍵字
  • 搜尋 TDR
  • 授權 Q&A
    • 我的頁面
    • 接受 E-mail 通知
    • 編輯個人資料
  1. NTU Theses and Dissertations Repository
  2. 工學院
  3. 材料科學與工程學系
請用此 Handle URI 來引用此文件: http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/32373
標題: (4,5-diaza-9,9’-spirobifluorene)官能基共軛寡聚物界面改質劑用於反式P3HT:TiO2 異質混摻太陽能電池之研究
Development of Inverted P3HT:TiO2 Bulk Heterojunction Hybrid Solar Cell Using (4,5-Diaza-9,9’-spirobifluorene) Functionalized Donor/Acceptor Conjugated Oligomer as Interface Modifier
作者: Yi-Chen Ho
何宜臻
指導教授: 林唯方(Wei-Fang Su)
關鍵字: 太陽能電池,二氧化鈦奈米桿,寡分子聚合物,寡分子聚合物,
Solar cell,Poly (3-hexylthiophene),TiO2 nanorod,Surface modifier,Oligomer,
出版年 : 2011
學位: 碩士
摘要: 在此研究中,我們主要討論如何有效的改善poly (3-hexylthiophene) (P3HT)與二氧化鈦奈米桿(TiO2 nanorods)混摻製成有機太陽能電池的效率。混摻太陽能元件效率受到材料分散性、相容性、電子遷移率以及介面能階匹配度等因素之影響,因此我們藉由研究高分子以及無機奈米粒子材料的表面改質,來提升太陽能電池元件的效率。我們透過新合成出低能階的寡分子聚合物:PZFDPP、PZDBTZ以及PZFTBT用做於改質二氧化鈦奈米桿的表面並應用在混摻太陽能電池上,這些寡聚物能階分別為1.2eV、1.6eV以及1.6eV,由置換成TiO2-PZFDPP材料的電子遷移率結果可以明顯的發現,相較於未改質的二氧化鈦電子遷移率自1.1X10-4cm2/Vs 增加到1.8X10-4cm2/Vs。最後,針對反式太陽能電池元件有進一步的設計成果,利用混摻的特色與反式元件較為適合的結構模式,提出一套適合二氧化鈦混摻P3HT的太陽能元件系統,並配合改質之二氧化鈦奈米桿之使用,成功的讓太陽能電池元件效率由未改質的0.42%提升至1.2%。並且針對此研究成果的結構做差異性的探討,了解有效增加電荷傳輸能力的原因與材料間能階的匹配性有關。
Our research focuses on the improvement of power conversion efficiency (PCE) of poly (3-hexylthiophene) (P3HT)/TiO2 nanorods hybrid organic solar cell. We studied the effect of different surface ligands on the efficiency of P3HT/TiO2 nanorods hybrid solar cells.
Three conducting oligomeric surface modifiers made by coupling 4, 5–diaza–9, 9’-spiro bifluorene with diketo pyrrolopyrrole (PZFDPP), bithiazole (PZFBTZ), and thieny 1-2, 1, 2-benzothiadiazole (PZFTBT) were synthesized. They exhibit low energy gap of 1.2 eV, 1.6 eV, and 1.6 eV for PZFDPP, PZFBTZ, and PZFTBT respectively. They can form cascade bandgap between P3HT and TiO2 to facilitate the transport of charge carriers. PZFDPP modified TiO2 has the highest electron mobility of 1.8X10-4cm2/Vs as compared with 1.1X10-4cm2/Vs of unmodified TiO2.
The surface modified TiO2 was mixed with P3HT to fabricate invert solar cells. The PZFDPP modified TiO2 exhibits the best performance. Its power conversion efficiency was increased from 0.42% to 1.20% as compared with unmodified TiO2.
URI: http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/32373
全文授權: 有償授權
顯示於系所單位:材料科學與工程學系

文件中的檔案:
檔案 大小格式 
ntu-100-1.pdf
  目前未授權公開取用
9.16 MBAdobe PDF
顯示文件完整紀錄


系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。

社群連結
聯絡資訊
10617臺北市大安區羅斯福路四段1號
No.1 Sec.4, Roosevelt Rd., Taipei, Taiwan, R.O.C. 106
Tel: (02)33662353
Email: ntuetds@ntu.edu.tw
意見箱
相關連結
館藏目錄
國內圖書館整合查詢 MetaCat
臺大學術典藏 NTU Scholars
臺大圖書館數位典藏館
本站聲明
© NTU Library All Rights Reserved