請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/31704
標題: | 適應性等位函數法在固化問題上之模擬 Adaptive Level Set Method for Solidification Problems |
作者: | Ming-Hsuan Chuang 莊明軒 |
指導教授: | 藍崇文 |
關鍵字: | 適應性等位函數法,固化問題, adaptive Level set method,solidification problems, |
出版年 : | 2006 |
學位: | 碩士 |
摘要: | 等位函數法(Level set method)是應用於處理界面最廣泛的方法,由於本身為距離界面之函數,界面永遠由平滑、連續之 (zero level set)函數表達之,可輕易獲得界面位置並且能處理極為複雜的界面,當界面彼此靠近等位函數能自動將界面融合(merging);反之則自動分離(breaking),並且也容易將程式由二維拓展為三維。
本實驗室發展適應性相場模式處理固化問題已有五年時間,且有許多豐碩的成果;在科學界近年來等位函數法也趨於成熟,能模擬樹枝狀晶體甚至合金固化問題[1],由於不同於相場模式之diffused-interface model,而是利用sharp-interface model處理界面,在粗網格就能夠得到定性之結果。本研究開創將等位函數法運用於適應性有限體積架構上模擬種種固化問題,首先介紹等位函數法於適應性有限體積法之離散,引入等位函數法後如何維持自然之二階收斂,sharp-interface model如何處理不連續之兩相問題,接著測試一些具有解析解之固化問題驗証程式之正確性及精確性,最後嘗試模擬過冷環境中樹枝狀晶體的成長。 The level set method has been widely used in numerics of propagating interfaces. Level set function is close to a signed distance function, and it can be used to exactly locate the interface in order to apply discretizations. Topological changes in the evolving front are handled naturally. The position of the front at time t is given by the zero-level set of a smooth, continuous function. This set needs not be connected and can break and merge as t advances. Furthermore, it can be easily extended to higher dimensions. Over the last five years, the adaptive phase field model was widely adopted to study solidification problems in our group, while many fruitful results have been reported. However, because the concept of diffusive interface is adopted, the drawback for performing phase field modeling lies on its very awful computational load. Recently, the development of level set method has become mature and was used to simulate cases with complex distortion of interface, such as dendritic growth of an alloy [1]. Since the formulation of sharp-interface model is embedded locally, in principle, the level set method can simulate these problems accurately by using relatively thicker mesh structure. In this report, we have developed an adaptive level set method based on the finite volume method (FVM) to simulate solidification problems. To check its feasibility, we have derived numerical and physical algorithms carefully and discussed the convergence of our present model. Moreover, comparisons with analytical solutions were given by testing several Stefan problems. Finally, we tried to challenge the case dendritic growth under high supercooling. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/31704 |
全文授權: | 有償授權 |
顯示於系所單位: | 化學工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-95-1.pdf 目前未授權公開取用 | 1.99 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。