請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/31349完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 舒貽忠 | |
| dc.contributor.author | Liang-Ching Tseng | en |
| dc.contributor.author | 曾亮境 | zh_TW |
| dc.date.accessioned | 2021-06-13T02:44:40Z | - |
| dc.date.available | 2006-10-25 | |
| dc.date.copyright | 2006-10-25 | |
| dc.date.issued | 2006 | |
| dc.date.submitted | 2006-10-19 | |
| dc.identifier.citation | [1] S. Roundy, P. K. Wright and J. M. Rabaey, 2004, Energy
Scavenging for Wireless Sensor Networks: With Special Focus on Vibrations, Kluwer Academic Publishers, Boston, MA. [2] A. Chandrakasan, R. Amirtharajah, J. Goodman and W.Rabiner, 1998, Trends in low power digital signal processing , Int. Symp. Circuits Syst. 4 604–7 [3] S. Roundy, D. Steingart, L. Frechette, P. Wright and J. Rabaey, 2004, Power sources for wireless sensor networks, Lect. Notes Comput. Sci. 2920 1–17 [4] S. Roundy, E. S. Leland, J. Baker, E. Carleton, E. Reilly, E. Lai , B. Otis, J. M. Rabaey, P. K. Wright and V. Sundararajan, 2005, Improving power output for vibration-based energy scavengers, IEEE Pervasive Comput. 4 28–36 [5] H. A. Sodano, D. J. Inman and G. Park, 2004, A review of power harvesting from vibration using piezoelectric materials, Shock Vib. Digest 36 197–205 [6] Y. B. Jeon, R. Sood, J. H. Jeong and S. G. Kim, 2005, MEMS power generator with transverse mode thin film PZT, Sensors Actuators A 122 16–22 [7] G. Poulin, E. Sarraute and F. Costa, 2004, Generation of electric energy for portable devices: comparative study of an electromagnetic and a piezoelectric system, Sensors Actuators A 116 461–71 [8] S. Roundy, P. K. Wright and J. Rabaey, 2003, A study of low level vibrations as a power source for wireless sensor nodes, Comput. Commun. 26 1131–44 [9] T. Starner, 1996, Human-powered wearable computing, IBM Systems Journal, Vol 35, NOS 3&4, page 618-629. [10] N. S. Shenck and J. A. Paradiso, 2001,Energy scavenging with shoe-mounted piezoelectrics, Micro, IEEE, Vol: 21, Issue: 3, page 30-42. [11] N. Elvin, A. Elvin and D. H. Choi, 2003, A self-powered damage detection sensor, J. Strain Anal. 38 115–24 [12] N. Elvin, A. Elvin and M. Spector, 2001, A self-powered mechanical strain energy sensor, Smart Mater. Struct. 10 293–9 [13] T. H. Ng and W. H. Liao, 2005, Sensitivity analysis and energy harvesting for a self-powered piezoelectric sensor, J. Intell. Mater. Syst. Struct. 16 785–97 [14] S. Roundy and P. K. Wright, 2004, A piezoelectric vibration based generator for wireless electronics, Smart Mater. Struct. 13 1131–42 [15] P. J. Cornwell, J. Goethal, J. Kowko and M. Damianakis, 2005, Enhancing power harvesting using a tuned auxiliary structure, J. Intell. Mater. Syst. Struct. 16 825–34 [16] L. Mateu and F. Moll, 2005, Optimum piezoelectric bending beam structures for energy harvesting using shoe inserts, J. Intell. Mater. Syst. Struct. 16 835–45 [17] K. Mossi, C. Green, Z. Ounaies and E. Hughes, 2005, Harvesting energy using a thin unimorph prestressed bender: geometrical effects, J. Intell. Mater. Syst. Struct. 16 249–61 [18] N. M. White, P. Glynne-Jones and S. P. Beeby, 2001, A novel thick-film piezoelectric micro-generator, Smart Mater. Struct. 10 850–2 [19] H. S. Yoon, G. Washington and A. Danak, 2005, Modeling, optimization, and design of efficient initially curved piezoceramic unimorphs for energy harvesting applications, J. Intell. Mater. Syst. Struct. 16 877–88 [20] S. Kim, W. W. Clark and Q. M. Wang, 2005, Piezoelectric energy harvesting with a clamped circular plate: analysis , J. Intell. Mater. Syst. Struct. 16 847–54 [21] S. Kim, W. W. Clark and Q. M. Wang, 2005, Piezoelectric energy harvesting with a clamped circular plate: experimental study, J. Intell. Mater. Syst. Struct. 16 855–63 [22] M. Ericka, D. Vasic, F. Costa, G. Poulin and S. Tliba, 2005, Energy harvesting from vibration using a piezoelectric Membrane, J. Physique Coll. 128 187–93 [23] J. J. Allen and A. J. Smits, 2001, Energy harvesting EEL, J. Fluids Struct. 15 629–40 [24] G. W. Taylor, J. R. Burns, S. M. Kammann, W. B. Powers and T. R. Welsh, 2001, The energy harvesting eel: a small subsurface ocean/river power generator, IEEE J. Ocean. Eng. 26 539–47 [25] H. W. Kim, A. Batra, S. Priya, K. Uchino, D.Markley, R. E. Newnham and H. F. Hofmann, 2004 Energy harvesting using a piezoelectric cymbal transducer in dynamic environment , Japan. J. Appl. Phys. 43 6178–83 [26] H. W. Kim, S. Priya, K. Uchino and R. E. Newnham, 2005, Piezoelectric energy harvesting under high pre-stressed cyclic vibrations J. Electroceram. 15 27–34 [27] S. Priya, C. T. Chen, D. Fye and J. Zahnd, 2005, Piezoelectric windmill: a novel solution to remote sensing, Japan. J. Appl. Phys. 44 L104–7 [28] N. E. duToit, B. L. Wardle and S. G. Kim, 2005, Design considerations for MEMS-scale piezoelectric mechanical vibration energy harvesters, Integr. Ferroelectr. 71 121–60 [29] F. Lu, H. P. Lee and S. P. Lim, 2004, Modeling and analysis of micro piezoelectric power generators for micro-electro-mechanical-systems applications, Smart Mater. Struct. 13 57–63 [30] M. J. Ramsay and W. W. Clark, 2001, Piezoelectric energy harvesting for bio MEMS applications, Proc. SPIE 4332 429–38 [31] M. Umeda, K. Nakamura and S. Ueha, 1996, Analysis of the transformation of mechanical impact energy to electric energy using piezoelectric vibrator, Japan. J. Appl. Phys. 35 3267–73 [32] M. Umeda, K. Nakamura and S. Ueha, 1997, Energy storage characteristics of a piezo-generator using impact induced vibration, Japan. J. Appl. Phys. 36 3146–51 [33] M. Goldfarb and L. D. Jones, 1999, On the efficiency of electric power generation with piezoelectric ceramic, Trans. ASME, J. Dyn. Syst., Meas. Control 121 566–71 [34] C. D. Richards, M. J. Anderson, D. F. Bahr and R. F. Richards, 2004, Efficiency of energy conversion for devices containing a piezoelectric component, J. Micromech. Microeng. 14 717–21 [35] S. Roundy, 2005, On the effectiveness of vibration-based energy harvesting, J. Intell. Mater. Syst. Struct. 16 809–23 [36] G. A. Lesieutre, G. K. Ottman and H. F. Hofmann, 2004, Damping as a result of piezoelectric energy harvesting J. Sound Vib. 269 991–1001 [37] H. A. Sodano, D. J. Inman and G. Park,2005, Comparison of piezoelectric energy harvesting devices for recharging batteries, J. Intell. Mater. Syst. Struct. 16 799–807 [38] H. A. Sodano, D. J. Inman and G. Park, 2005, Generation and storage of electricity from power harvesting devices, J. Intell. Mater. Syst. Struct. 16 67–75 [39] G. K. Ottman, H. F. Hofmann, A. C. Bhatt and G. A. Lesieutre, 2002, Adaptive piezoelectric energy harvesting circuit for wireless remote power supply, IEEE Trans. Power Electron. 17 669–76 [40] G. K. Ottman, H. F. Hofmann and G. A. Lesieutre, 2003, Optimized piezoelectric energy harvesting circuit using step-down converter in discontinuous conduction mode, IEEE Trans. Power Electron. 18 696–703 [41] D. Guyomar, A. Badel and E. Lefeuvre, 2005, Toward energy harvesting using active materials and conversion improvement by nonlinear processing, IEEE Trans. Ultrason. Ferroelectr. Freq. Control 52 584–95 [42] E. Lefeuvre, A. Badel, A. Benayad, L. Lebrun, C. Richard and D. Guyomar, 2005, A comparison between several approaches of piezoelectric energy harvesting, J. Physique Coll. 128 177–86 [43] E. Lefeuvre, A. Badel , C. Richard and D. Guyomar, 2005 Piezoelectric energy harvesting device optimization by synchronous electric charge extraction, J. Intell. Mater. Syst. Struct. 16 865–76 [44] A. Badel, D. Guyomar, E. Lefeuvre and C. Richard, 2005, Efficiency enhancement of a piezoelectric energy harvesting device in pulsed operation by synchronous charge inversion, J. Intell. Mater. Syst. Struct. 16 889–901 [45] C. B. Williams and R. B. Yates, 1996, Analysis of a micro-electric generator for Microsystems, Sensors Actuators A 52 8–11 [46] H. A. Sodano, G. Park and D. J. Inman, 2004, Estimation of electric charge output for piezoelectric energy harvesting, J. Strain 40 49–58 [47] 陳文咸,1982, 壓電效應─歷史與應用, 科學月刊 0156期 [48] Y. C. Shu and I. C. Lien, 2006, Anlysis of power output for piezoelectric energy harvesting systems, Smart Mater. Struct. 15 1499-1512 [49] Y. C. Shu and I. C. Lien, 2006, Efficiency of energy conversion for a piezoelectric power harvesting system, J. Micromech. Microeng. 16 2429-2438 [50] 連益慶, 2005, 壓電能量擷取系統之分析研究 [51] 林祺皓, 2003, 壓電振動子之模型建立與蓄能探討 [52] 韓春生, 2003, 壓電式蓄能系統之實驗研究 [53] ANSI/IEEE Standard 176-1987 IEEE Standard on Piezoelectricity | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/31349 | - |
| dc.description.abstract | 環顧大部分以壓電電源擷取系統為研究的文章，多以AC交流電輸出為主。本篇論文之主題則是以實驗為主，驗證一AC-DC交流轉直流之壓電電源擷取器理論模型之正確性，從理論模型計算出的位移量合實驗數據來作比對分析。此外還列出壓電電源擷取器位移量、電壓及功率之解析解，及欲獲得較佳功率時，設計壓電電源擷取器的設計準則。 | zh_TW |
| dc.description.abstract | As most of the researches about power harvesting concentrate on the AC power output. The main topic of this thesis is an experiment validation of an AC-DC power output analytic model, which correspond to the analytic solutions satisfactorily. The analytic solutions of displacements, voltage, power and the design criteria for achieving optimal power are also mentioned. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-13T02:44:40Z (GMT). No. of bitstreams: 1 ntu-95-R93543006-1.pdf: 1009864 bytes, checksum: 1e30862af07fd114a02f4b32feb8595f (MD5) Previous issue date: 2006 | en |
| dc.description.tableofcontents | 目錄
誌謝------------------------------------------------------I 摘要----------------------------------------------------III Abstract-------------------------------------------------IV 目錄------------------------------------------------------V 圖目錄-------------------------------------------------VIII 表目錄----------------------------------------------------X 第一章 導論 1.1 研究動機-------------------------------------------1 1.2 文獻回顧-------------------------------------------3 1.3 論文架構-------------------------------------------7 第二章 壓電理論 2.1 壓電材料使用歷史-----------------------------------8 2.2 常見之壓電材料------------------------------------11 2.2.1 單晶類(single crystal)--------------------------11 2.2.2 薄膜類(thin film)-------------------------------11 2.2.3 聚合物類(polymer)-------------------------------11 2.2.4 陶瓷類(ceramic) --------------------------------11 2.2.5 複合材料類(composite material)------------------11 2.3 壓電材料工作原理----------------------------------12 2.3.1 正壓電效應--------------------------------------12 2.3.2 逆壓電效應--------------------------------------12 2.3.3 壓電本構方程式_---------------------------------13 第三章 壓電能量擷取器模型之建立與分析 3.1 統御方程式----------------------------------------16 3.2 使用參數之定義------------------------------------22 3.3 力電非耦合之分析----------------------------------23 3.4 力電耦合之分析------------------------------------25 3.5 解析解之分析--------------------------------------26 3.6 最佳化功率及阻抗----------------------------------30 3.6.1 力電非耦合之分析--------------------------------30 3.6.2 力電耦合之分析----------------------------------31 3.6.3 解析解之分析------------------------------------31 3.6.3.1 短路共振頻率----------------------------------31 3.6.3.2 開路共振頻率----------------------------------32 第四章 實驗與分析 4.1 實驗儀器------------------------------------------34 4.2 實驗材料與參數量測--------------------------------37 4.3 位移量測方式--------------------------------------39 4.4 實驗參數之檢驗------------------------------------40 4.5 頻率響應------------------------------------------43 4.6 位移與阻抗之關係（固定頻率）-----------------------44 4.7 位移與頻率之關係（固定阻抗）-----------------------46 第五章 討論與未來展望 5.1 結果討論------------------------------------------51 5.2 未來展望------------------------------------------52 參考文獻-------------------------------------------------53 | |
| dc.language.iso | zh-TW | |
| dc.subject | 壓電材料 | zh_TW |
| dc.subject | 壓電能量擷取 | zh_TW |
| dc.subject | Piezoelectric power harvesting | en |
| dc.subject | Piezoelectric materials | en |
| dc.title | 壓電能量擷取器交流-直流功率轉換分析之實驗驗證 | zh_TW |
| dc.title | Experimental Validation of the Analysis of AC-DC Power Output for a Piezoelectric Energy Harvesting System | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 95-1 | |
| dc.description.degree | 碩士 | |
| dc.contributor.oralexamcommittee | 吳文中,施文彬 | |
| dc.subject.keyword | 壓電能量擷取,壓電材料, | zh_TW |
| dc.subject.keyword | Piezoelectric power harvesting,Piezoelectric materials, | en |
| dc.relation.page | 58 | |
| dc.rights.note | 有償授權 | |
| dc.date.accepted | 2006-10-20 | |
| dc.contributor.author-college | 工學院 | zh_TW |
| dc.contributor.author-dept | 應用力學研究所 | zh_TW |
| 顯示於系所單位： | 應用力學研究所 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-95-1.pdf 未授權公開取用 | 986.2 kB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。