請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/30295
標題: | 離子高分子金屬複合材料在可調變光衰減器的應用 Application of Ionic Polymer Metallic Composite in Variable Optical Attenuator |
作者: | Yu-Da Chen 陳煜達 |
指導教授: | 蘇國棟(Guo-Dung John Su) |
關鍵字: | 離子高分子金屬複合材料,可調變光衰減器, Ionic Polymer Metallic Composite,Variable Optical Attenuator, |
出版年 : | 2011 |
學位: | 碩士 |
摘要: | IPMC所指的是一種離子高分子金屬複合材料,它可以被電壓所致動,隨著電壓的增加使其形狀逐漸彎曲。我們將使用離子高分子金屬複合材料在自由空間中來做為可調變光衰減器的角色。我們將量測離子高分子金屬複合材料的元件插入損耗、光衰減範圍、偏振相關損耗、波長相關損耗以及反應時間。我們發現離子高分子金屬複合材料在2伏特的驅動電壓以下提供明顯的致動效果。我們所使用的高分子金屬複合材料元件表面粗糙度為0.66 μm,元件插入損耗為2.89 dB。此高分子金屬複合材料的光衰減範圍可高達80 dB,其解析度為每伏特40 dB。元件的偏振相關損耗範圍為0.1 dB到0.6 dB。元件在1527 nm到1563 nm光波段的波長相關損耗範圍為0.15 dB到0.85 dB。元件的反應時間和鬆弛時間分別為0.5秒和0.3秒。元件的致動電壓為2伏特,而元件的功率損耗為5.78 mW。 Ionic-polymer-metallic composite (IPMC) can be actuated by low voltage and be bended gradually with increasing driving voltage. We used IPMC as a variable optical attenuator (VOA) in free space configuration. We measured the insertion loss, optical attenuation range, polarization dependent loss (PDL), wavelength dependent loss (WDL), and response time. We concluded that our IPMC can be actuated by less than two volts. The surface roughness of our IPMC was about 0.66 μm and the insertion loss was 2.89 dB, and optical attenuation range of our device is as great as 80 dB with 40 dB/volt resolution. The range of PDL is about from 0.1 dB to 0.6 dB. The wavelength dependent loss is from 0.15 dB to 0.85 dB in the wavelength range from 1527 nm to 1563 nm. Response time and relaxation time of the device are about 0.5 second and 0.3 second. The actuation voltage was 2 volts and the power consumption was 5.78 mW. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/30295 |
全文授權: | 有償授權 |
顯示於系所單位: | 光電工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-100-1.pdf 目前未授權公開取用 | 4.18 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。