請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/29873完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 林招松(Chao-Sung Lin) | |
| dc.contributor.author | Meng-Hsi Tsai | en |
| dc.contributor.author | 蔡孟熹 | zh_TW |
| dc.date.accessioned | 2021-06-13T01:22:42Z | - |
| dc.date.available | 2007-07-20 | |
| dc.date.copyright | 2007-07-20 | |
| dc.date.issued | 2007 | |
| dc.date.submitted | 2007-07-17 | |
| dc.identifier.citation | [1] Y. Kojima, Master .Sci. Forum, Vol.3, 2000, pp.350-
351. [2] 王建義, “鎂合金之環保化”,輕金屬特刊,九十一年六月號, pp.125-130. [3] J. E. Gary , B. Luan , ”Protective coating on magnesium and its alloys-a critical review”, “Journal of Alloys and Compounds” Vol.336 2002, pp.88-113. [4] A. Yamamoto, A. Watanabe, K. Sugahara, S. Fukumoto and H. Tsubakino, “Deposition Coating of Magnesium Alloys with Pure Magnesium”, “Materials Transactions”, Vol42, 2001 ,pp. 1237-1242. [5] S. Ono, K. Asami and N. Masuko, “Mechanism of Chemical Conversion Coating Film Growth on Magnesium and magnesium Alloys”, “Materials Transactions”, Vol. 42, 2001, pp. 1225-1231. [6] 邱六合,林信安, “鎂合金腐蝕與表面處理”,輕金屬特刊, 九十一年六月號, pp118-124. [7] The RoHS Directive stands, “ http://www.rohs.gov.uk/ ” [8] 方思凱,“AZ31鎂合金之硝酸鈰化成處理”,台灣大學碩士論 文,93年七月. [9] 李威志 ,“AZ31鎂合金之磷酸鹽/過錳酸鹽化成皮膜微結構與 成長機制探討” ,台灣大學碩士論文,94年七月. [10] 傅延俊, “鎂合金之陽極處理”台灣大學碩士論文,九十四年 七月 [11] C. S. Lin, H. C. Lin, K. M. Lin, W. C. Lai “Formation and properties of stannate conversion coating on AZ61 magnesium”, ”Corrosion Science”, Vol. 48, 2006 ,pp.93-109. [12] S. Mathieu, C. Rapin, J. Steinmetz, P. Steinmetz , “A corrosion of main constituent phases of AZ91D magnesium alloys”, “Corrosion Science”, Vol.45 ,2003, pp.2741-2755. [13] Guangling Song, Andrej Atrens, Matthew Dargusch, “Influence of Microstructure on the corrosion of diecast of AZ91D”, “Corrosion Science”, Vol.41 ,1999, pp.249-273. [14] Guangling Song, Andrej Atrens, Xianliang Wu, and Bo Zhang, “Corrosion behaviour of AZ21,AZ501,and AZ91 in Sodium Chloride”, “Corrosion Science”, Vol.40 ,1998,pp.1769-1791 [15] Y. Kojima, “Project of Plat form Science and Technology for Advanced Magnesium Alloys, 'Materials Transactions”, Vol. 42, 2001, pp. 1154-1159. [16] C. H. Caceres, C. J. Davidson, J. R. Griffiths, C. L. Newton , “Effects of solidification rate and ageing on the microstructure and mechanical proper AZ91 alloy”, “ Materials Science and Engineering”, Vol. 325, 2002, pp. 344-355. [17] 戴光勇，“鎂合金表面處理技術(上)”，材料與社會，24 期，1988， pp. 57。 [18] 戴光勇，“鎂合金表面處理技術(下)”，材料與社會，25 期，1988， pp. 57。 [19] 楊金瑞,葉信宏,“鎂合金表面處理簡介”，工業材料，152 期，1999，pp. 106。 [20] G. E. Thompson, K. Shimizu and G. C. Wood, “Observation of flaws in Anodic Films on Aluminum” , “Nature”, Vol. 272 31, pp. 471-472（1980） [21] Aalbert Industries Companies, http://www.aimt- group.com, 2007 [22] Keronite Advanced Surface Technology, http://www.keronite.com 2007 [23] 謝仁翔, “純鎂薄膜為犧牲陽極以陰極保護AZ91D鎂合金之防 蝕研究”,中興大學碩士論文,九十五年八月. [24] P. Biestek and J. Weber, “Electrolytic and Chemical Conversion Coatings, 1st ed”, Portcullis Press Ltd., Poland, 1976, pp. 208-210, 306-311. [25] A. Yu. Simaranov, A. I. Marshakov, Yu. N. Mikhailovskii, “The Composition and Protective Properties of Chromate Conversion Coatings on Magnesium,” UDC 620.197.6. [26] A. K. Sharma, ”Chromate Conversion Coatings for Magnesium-Lithium Alloys” , “Metal Finishing”, 1989, pp.73-74. [27] D. Hwake, D. L. Albright, “A Phosphate-Permanganate Conversion Coating for Magnesium”, “Metal Finishing”, Vol.93, No.10, 1995 , pp34-38. [28] I. Azkarate, P. Cano, A. Del Barrio, M. Insausti, P. Santa Coloma, “Alternatives to Cr(VI) conversion coating for magnesium pretreatment”, “International Congress Magnesium Alloys and their Applications”,2000 [29] 楊聰仁，”鎂合金非鉻系表面處理技術”，工業材料雜誌， 174期，2001，pp. 97-101. [30] R. G. Buchheit, S. B. Mamidipally, P. Schmutz, “Active Corrosion Protection in Ce-Modified Hydrotalcite Conversion Coatings”, “Corrosion Science”, Vol.58, No. 1, 2002, pp. 3-14. [31] F. W. Eppensteiner , M. R. Jenkins, “Metal Finishing Guidebook and Directory”, Vol. 90, 1992, pp. 413. [32] J. Honer, “Chromate Post Treatments”, “Metal Finishing” Vol. 88, No.2, 1990, pp.76. [33] A. K. Sharma, “Chromate Conversion Coatings for Magnesium Lithium Alloys”, “Metal Finishing”, Vol. 87, 1989, pp. 73. [34] L. H. Chiu, H. A. Lin, C. C. Chen, C. C. Yang, C.H. Chang and J. C. Wu, “Effect of Aluminum Coatings on Corrosion Properties of AZ31B Magnesium Alloy,” “Materials Science Forum” , Vol.13, 2003 419-422, pp. 909-914. [35] H. Umehara, M. Takaya, Y. Kojima, “An Investigation of the structure and Corrosion Resistance of Permanganate Conversion Coatings”,“ Materials Transactions”, Vol. 42, 2001, pp. 1691-1699. [36] M. Pourbaix, “Atlas of Electrochemical Equilibria in Aqueous solution”, “NACE”, 1974 [37] M. A. Gonzalez-Nunez, P. Skeldon, G. E. Thompson, H. Karimzadeh, P. Lyon,T. E. Wilks, “Corrosion Science.”, Vol. 55, 1999, pp.1136 [38] A. L. Rudd, C. B. Bresline, F. Mansfeld, “The Corrosion Protection Afforded by Rare Earth Conversion Coating Applied to Magnesium, “Corrosion Science”, Vol.42, 2000, pp. 275. [39] Binary Alloy Phase Diagrams, American Society for Metals, Park, Ohin,（1986） [40] F. Andreatta, I. Apachitei, A. A. Kodentsov, J, Dzwonczyk, J. Duszczyk, “Votla potential of second phase particles in extruded AZ80 magnesium alloy”, “Electrochimica Acta”, Vol.51, 2006, pp.3351-3357. [41] M. Zhao, S. Wu, P. An, J. Luo, Y. Fukuda, H. Nakae, “Microstructure and corrosion resistance of chromium- free multi-elements complex coating on AZ91D magnesium alloy”, “Material Chemistry and Physics”, Vol. 99, 2006, pp. 54-60. [42] 黃國維，“鎂合金產業技術及市場發展趨勢專題調查”, 2001, 十月, pp.2-5 [43] N. Kanani, “Electroplating –Basic Principles, Processes and Practice”, Elsevier , 1st edtion, October, 2004, pp.300. | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/29873 | - |
| dc.description.abstract | 鎂與其合金的標準還原電位低於大部分的結構材料，容易造成腐蝕。潛力與現今應用產生落差，因此各種防蝕的方法因應而生。化成處理的方法之中以鉻酸鹽的防蝕具有最好效果，但六價鉻對於人體具有毒性。磷酸鹽/錳酸鹽的化成處理是具有潛力能夠替代六價鉻化成處理的方法之一。不同鋁含量的鎂鋁合金具有不同的微結構，不同的製程也會造成微結構以及性質的差異。
本研究針對AZ31、AZ80與AZ91鎂鋁合金中Mg17Al12(β相)，對短時間（30、60與120秒）磷酸鹽/錳酸鹽化成皮膜的表面形貌、微結構及性質的差異。以光學顯微鏡、掃瞄式電子顯微鏡、橫截面穿透式電子顯微鏡以及低掠角X-ray晶體繞射，分析皮膜的表面型態和結構，配合極化曲線以及交流阻抗分析皮膜的抗蝕性質，以及百格試驗分析化成皮膜的附著性。結果顯示鎂合金的製程、組成都會影響Mg17Al12(β相)的體積分率、形貌以及分佈，這些因素對化成皮膜的表面形貌、結構、附著性以及抗蝕性質有很大的影響。 | zh_TW |
| dc.description.abstract | The standard reduction potential of magnesium and its alloys are lower than the other structural materials. Therefore, magnesium alloys are highly susceptible to corrosion, giving rise to the limitation on their practical application. Many surface modification methods have, thus, been developed to protect magnesium alloys from corrosion. Among the conversion coating methods, chromate conversion caoting exhibits the best corrosion protective properties. Howerver, Cr(VI) is toxic to human body. Phosphate-permanganate conversion treatment is one of the methods that are potentially alternative to the chromate treatments. The microstructures and the properties of magnesium alloy can be controlled by its aluminium contents and the corresponding fabrication processes.
This research focuses on how the Mg17Al12 (β) phase in AZ31,AZ80 and AZ91 magnesium- aluminum alloys influences the surface morphology, microstructures and properties of the phosphate-permanganate coating formed in a short time (30, 60 and 120sec) of immersion. This research utilizes optical microscopy, SEM, TEM and low glancing-angle XRD to analyze the surface morphology and crystal structure of the coating, measures the electrochemical polarization curve and electrochemical impendence spectroscopy to analyze the corrosion properties of the coating, and uses ASTM D3359-97 method to study the adhesion of conversion coating. The results shows that the fabrication process and composition of the alloys markedly influence the shape, volume fraction and distribution of Mg17Al12 (β) phase which in turn, affects the surface morphology, microstructures, adhesion properties and corrosion properties of the coating. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-13T01:22:42Z (GMT). No. of bitstreams: 1 ntu-96-R92527059-1.pdf: 2155376 bytes, checksum: be87fdd15397b2e7ddd016e86417feeb (MD5) Previous issue date: 2007 | en |
| dc.description.tableofcontents | 摘要.....................................................i
Abstract................................................ii 總目錄..................................................iv 圖目錄................................................viii 表目錄................................................xiii 第一章 緒論........................................1 1.1 前言.............................................1 1.2研究動機..........................................1 第二章 文獻回顧....................................4 2.1 鎂合金簡介....................................4 2.1.1 鎂與鎂合金的特性..........................4 2.1.2 鎂合金的種類與表示方法....................4 2.2 鎂合金的防蝕處理..............................5 2.2.1 鎂合金的陽極處理..........................5 2.2.2電鍍/無電鍍處理............................5 2.2.3 物理氣相沈積法............................5 2.2.4 鎂合金的化成處理..........................6 2.2.4.1 鉻酸鹽化成處理.........................6 2.2.4.2 磷酸鹽/錳酸鹽化成處理..................8 2.2.4.3 錫酸鹽化成處理.........................9 2.2.4.4 稀土元素化成處理......................10 2.3 鎂合金微結構的效應...........................10 2.3.1 微結構對於腐蝕行為的影響.................10 2.3.2 微結構對於陽極處理的影響.................11 2.3.3 微結構對於化成處理的影響.................12 第三章 實驗方法.....................................19 3.1 實驗流程.....................................19 3.1.1材料準備與前處理..........................19 3.1.2 化成處理.................................21 3.2 巨觀性質觀察.................................21 3.2.1 表面顏色觀察.............................21 3.2.2 重量測量.................................21 3.3 微觀性質觀察.................................21 3.3.1 光學顯微鏡觀察...........................21 3.3.2 掃描式電子顯微鏡觀察.....................23 3.3.3 能量散佈光譜儀...........................23 3.3.4 低掠角X光繞射儀分析......................24 3.3.5穿透式電子顯微鏡橫截面觀察................24 3.4 化成皮膜性質分析.............................25 3.4.1 極化曲線.................................25 3.4.2 附著性測試...............................25 3.4.3 交流阻抗分析.............................26 第四章 結果與討論...................................31 4.1 鎂合金底材的分析.............................31 4.2 巨觀性質觀察.................................31 4.2.1 皮膜重量變化.............................31 4.2.2 皮膜顏色分析.............................32 4.3 微觀性質觀察.................................32 4.3.1 光學顯微鏡觀察...........................32 4.3.2 掃瞄式電子顯微鏡觀察.....................36 4.3.2.1 表面觀察..............................36 4.3.2.2 橫截面SEM觀察.........................37 4.3.3 低掠角X光繞射分析........................38 4.3.4穿透式電子顯微鏡橫截面觀察................59 4.4 皮膜性質分析.................................64 4.1.1 開路電位.................................64 4.4.2 極化曲線.................................64 4.4.3 交流阻抗分析.............................65 4.4.4 百格試驗（附著性）.......................65 4.5綜合討論......................................74 第五章 結論........................................77 第六章 參考文獻....................................79 | |
| dc.language.iso | zh-TW | |
| dc.title | 鎂鋁合金中Mg17Al12對於磷酸鹽/錳酸鹽化成處理微結構與性質的影響 | zh_TW |
| dc.title | Effect of Mg17Al12 in Magnesium-Aluminum Alloy on the Microstructure and Properties of Phosphate / Permanganate Conversion Coating | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 95-2 | |
| dc.description.degree | 碩士 | |
| dc.contributor.oralexamcommittee | 莊東漢,林景崎,葛明德,張恆壽 | |
| dc.subject.keyword | Mg17Al12,鎂鋁合金,微結構,磷酸鹽/錳酸鹽化成處理,無鉻化成處理, | zh_TW |
| dc.subject.keyword | Mg17Al12,Magnesium-Aluminum alloy,Microstructure Phosphate/Permanganate Conversion Coating,,Chromium-free Conversion Coating, | en |
| dc.relation.page | 83 | |
| dc.rights.note | 有償授權 | |
| dc.date.accepted | 2007-07-18 | |
| dc.contributor.author-college | 工學院 | zh_TW |
| dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
| 顯示於系所單位： | 材料科學與工程學系 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-96-1.pdf 目前未授權公開取用 | 2.1 MB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。