請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/29825
標題: | 利用離子性聚合物-金屬複合材料於尿道人工括約肌之研發 Development of Artificial Urethral Sphincter by Ionic Polymer-Metal Composite |
作者: | Yao-Tong Lai 賴耀東 |
指導教授: | 蔡偉博(Wei-Bor Tsai) |
關鍵字: | 離子性聚合物-金屬複合材料,人工括約肌, IPMC,artificial urethral sphincter, |
出版年 : | 2007 |
學位: | 碩士 |
摘要: | 本論文主要探討的是利用離子性高分子-金屬複合材料與PDMS製成之人工括約肌於尿失禁的治療。離子性高分子-金屬複合材料是一種通電時會產生大於40%形變量的材料,而PDMS則為一具彈性之高分子,利用組合而成的人工括約肌進行尿路動力學測試。另外測試了一些離子性高分子-金屬複合材料的性質,例如:擺動角度測試、厚度與擺動高度關係及產生力量的測試。根據實驗結果,本實驗之離子性高分子-金屬複合材料經過85次使用後其擺動角度與初期使用時相近(約90度),且厚度越薄,擺動高度越高;當離子性高分子-金屬複合材料長度越短時,產生的力量越大。又根據尿路動力學結果顯示,本研究之人工括約肌可提供尿道高達100 cm-H2O的壓力,且當施予電壓為3伏特或4伏特時,壓力下降改變量分別約為10 cm-H2O與20 cm-H2O。 The main point of this thesis is focus on artificial sphincter for urinary incontinence, which uses ionic polymer metal composite (IPMC) and an elastic polymer, polydimethylsiloxane (PDMS) to make this project come true. IPMC is a kind of material which will have more than 40 % shape change under electrical stimulation. Combine IPMC and PDMS to make artificial sphincter in real, surround urinary tract and hold it. We also doing some experiments about characteristics of IPMC, including bending angle, the relationship between thickness and bending displacement, and force generation. According to experiment result, IPMC's bending angle mostly the same after 85 times uses. As the thickness of IPMC get thinner, the bending displacement will be higher;and the force generation will be larger if the length of IPMC be shorter. According to urodynamic study, our model can offer up to 100 cm-H2O when voltage moved, and decrease about 10 cm-H2O or 20 cm-H2O when voltage was 3 or 4. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/29825 |
全文授權: | 有償授權 |
顯示於系所單位: | 化學工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-96-1.pdf 目前未授權公開取用 | 7.82 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。