請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/28348完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 段維新(Wei-Hsing TUAN),Michel DUPEUX(Michel DUPEUX) | |
| dc.contributor.author | Chao-Yu Lee | en |
| dc.contributor.author | 李炤佑 | zh_TW |
| dc.date.accessioned | 2021-06-13T00:05:46Z | - |
| dc.date.available | 2007-07-31 | |
| dc.date.copyright | 2007-07-31 | |
| dc.date.issued | 2007 | |
| dc.date.submitted | 2007-07-28 | |
| dc.identifier.citation | [Dannenberg 1961] H. Dannenberg, “Measurement of adhesion by a blister method” Journal of Applied Polymer Science, 5(14), (1961) pp.125-134.
[Dundurs 1969] J. J. Dundurs, “Elastic Interaction of Dislocations with Inhomogeneities” Mathematical Theory of Dislocation, (1969) pp.70-115. [Ernst 1995] F. Ernst., “Metal-oxide interface” Materials Science and Engineering R14, No 3, (1995) pp.97-156. [Evans 1988] A. G. Evans and B. J. Dalgleish, “The edge cracking and spalling of brittle plates” Acta Metallurgica et Materialia, Vol.35, No 6. (1988) pp.1333-1341. [Evans 1993] A. G. Evans and B. J. Dalgleish, “The fracture resistance of metal-ceramic interfaces” Materials Science and Engineering A, 162, (1993) pp.1-13. [Felder 2003] E. Felder, E. Darque-Ceretti, Adhésion et Adhérence, CNRS Edt, Paris, (2003). [Gdoutos 2005] E. E. Gdoutos, Fracture Mechanics: An Introduction (2005), ISBN 1-4020-2863-6. [Garrison 1980] W. M. Garrison, Jr. and N.R. Moody, “Ductile Fracture” Journal of the Physics and Chemistry of solids, Vol. 14, (1980) pp.1035-1074. [Kanninen 1973] M. F. Kanninen, ”An augmented double cantilever beam model for studying crack propagation and arrest” International Journal of Fracture, 9 (1973) pp.83-92. [Knott 1977] J. F. Knott, “Micromechanisms of Fracture and the Fracture Toughness of Engineering Alloys” Fracture, Vol 1, ICF4, (1977) pp. 61-91. [Lacombe 2006] R. Lacombe, Adhesion measurement methods: Theory and practice (2006), ISBN 0-8247-5361-5. [Lee 2005] A. Lee, C. S. Litteken, R.H. Dauskardt, W.D. Nix, “Comparison of the telephone cord delamination method for measuring interfacial adhesion with the four-point bending method” Acta Materialia, 53 (2005) pp.609-616. [Lesage 2001] J. Lesage, D. Chicot. “Hardness and adhesion of coatings” Revista de la Facultad de Ingeniería de la U.C.V., Vol. 16, Nº 1, (2001) pp.33 – 38. [Lieng 1991] H. L. Lieng , Fundamentals of adhesion Plenum Press, New York. (1991) ISBN 0-306-43470-9. [Ma 1996] Q. Ma,”A four-point bending technique for studying subcritical crack growth in thin films and at interfaces” Journal of Material Research, 12 (1996) pp.840-845. [Maugis 1999] D. Maugis. Contact, Adhesion and Rupture of Elastic Solids (1999) ISBN 3-540-66113-1. [Marshall 1984] D. B. Marshall, A. G. Evans, C. Rossington ,”Measurement of adherence of residually stress thin films by indentation.Ⅱ. Experiments with ZnO/Si” Journal of Applied Physics, 56 (1984) pp.2639-2644. [Mittal 1976] K. L. Mittal, “Adhesion measurement of thin films” Electrocomponent Science and Technology, 3, (1976) pp.21-42. [Moon 2002] M. W. Moon, H. M. Jensen, J. W. Hutchinson, K. H. Oh, A. G. Evans. “The characterization of telephone cord buckling of compressed thin films on substrates” Journal of the Mechanics and Physics of Solids, 50 (2002) pp.2355-2377. [Rice 1990] J. Rice, Z. Suo, and J. S. Wang, in M. Rühle, A. G. Evans, M. F. Ashby and J. P. Hirth (eds.), Metal-Ceramic Interfaces, Acta-Scripta Materialia Proc. Ser., Pergamon, Oxford, Vol. 4, (1990) pp. 269. [Sanchez 1999] J. M. Sanchez, S. El-Mansy, B. Sun, T. Scherban, N. Fang, D. Pantuso, W. Ford, M. R. Elizalde, J. M. Martinez-Esnaola, A. Martin-Meizoso, J. Gil-Sevillano, M. Fuentes and J. Maiz. “Cross-sectional nanoindentation: a new technique for thin film interfacial adhesion characterization” Acta Materialia, 47, (1999) pp.4405-4413. [Sinnott 2003] S. B. Sinnott, E. C. Dickey., “Ceramic/metal interface structures and their relationship to atomic- and meso-scale properties” Materials Science and Engineering R, 43, (2003) pp.1-59. [Steinmann 1989] P. A. Steinmann, H. E. Hintermann,”A review of the mechanical tests of for assessment of thin-film adhesion” Journal of Vacuum Science and Technology, A7 (3), (1989) pp.2267-2272. [Sura 1990] V. M. Sura, “Indentation test for adhesion measurement of polyamide films” Journal of Adhesion Science and Technology, v4 n3 (1990) pp.161. [Volinsky 2002] A. A.Volinsky, N. R. Moody, W. W. Gerberich. “Interfacial toughness measurement for thin films on substrate” Acta Materialia, 50 (2002) pp.441-466. [Wilsforf 1983] H. G. F. Wilsforf, “The Ductile Fracture of Metals: a Microstructural Viewpoint” Materials Science and Engineering, Vol 59, (1983) pp.1-19. [Yang 1997] H. S.Yang, F. R. Brotzen, D. L. Callahan et al,”Electrostatic adhesion testing for the evaluation of metallization adhesion” Materials Research Society Symo. Proc.473, (1997) pp.63-68. [Youtsos 1999] A. G. Youtsos, M. Kiriakopoulos, Th. Timke. “Experimental and theoretical/numerical investigations of thin films bonding strength” Theoretical and Applied Fracture Mechanics, 31 (1999) pp.47-59 [Arjun 2005] A. Arjun, K. T. Wan, “Derivation of the strain energy release rate G from first principles for the pressured blister test” International Journal of Adhesion and Adhesives, 25 (2005) pp. 13-18. [Bosseboeuf 1997] A. Bosseboeuf, M. Dupeux, M. Boutry, T. Bourouina, “Bulge and blister test for assessment of coating strength and interfacial adhesion: Experimental challenge and theoretical tools,” Proceedings of the International Workshop October 13-17, 1997 in Holzhau (Germany), pp.169-181. [Cotterell 1997] B. Cotterell, Z.Chen, “The blister test-transition from plate to membrane behaviour for an elastic material” International Journal of Fracture, 86 (1997) pp.191-198. [Dannenberg 1961] H. Dannenberg, “Measurement of adhesion by a blister method,” Journal of Applied Polymer Science, 5(14), (1961)pp.125-134. [Dupeux 1998] M. Dupeux, A. Bosseboeuf, “Application of the blister test to adhesion energy measurements in metal / ceramic film-on-substrate systems,” Interfacial Science in Ceramic Jointing, (1998) pp.319-327. [Felder 2003] E. Felder, E. Darque-Ceretti, Adhésion et Adhérence, CNRS Edt., Paris, 2003. [Gent 1987] A.N. Gent, L.H. Lewandowski, “Blow-off pressures for adhering layers” Journal of Applied Polymer Science, 33 (1987) pp.1567-1577. [Guo 2005] S. Guo, K. T. Wan, D. A. Dillard, “A bending-to-stretching analysis of the blister test in the presence of tensile residual stress” International journal of solids and structures, 42 (2005) pp.2771-2784. [Hbaieb 2005] K. Hbaieb, Y.W. Zhang, “ A parametric study of a pressurized blister test for an elastic-plastic film-rigid substrate system” Materials science and engineering A, 390 (2005) pp385-392. [Hinkley 1983] J.A. Hinkley, “A blister test for adhesion of polymer films to SiO2” Journal of Adhesion, 16 (1983) pp.115-125. [Hohlfelder 1995] R. J. Hohlfelder, J. J. Vlassak, W. D. Nix, H. Luo, C. E. D. Chidsey, “Blister test analysis methods” Materials Research Society Symp. Proc. 356, (1995) pp.585-590. [Hohlfelder 1996] R. J. Hohlfelder, W. D. Nix, A. S. Mack, “Using the blister test to measure interfacial fracture toughness in inorganic film/substrate systems,” communication at the Materials Research Society Fall Meeting, Dec. 2-6, (1996), Boston (Mass). [Hohlfelder 1997] R. J. Hohlfelder, H. Luo, J. J. Vlassak, C. E. D. Chidsey, W. D. Nix, “Measuring interfacial toughness with the blister test” Materials Research Society Symp. Proc. 436, (1997) pp.115-120. [Hohlfelder 1998] R.J. Hohlfelder, “Bilge and Blister testing of thin films and their interfaces,” Ph.D, Stanford University (1998). [Hutchinson 1992] J.W. Hutchinson, Z. Suo, “Mixed mode cracking in layer materials” Advances in Applied Mechanics, 29 (1992) pp.63-191. [Jensen 1990] H.M. Jensen, “Mixed mode interface fracture criteria,” Acta Metallurgica, 38, (1990) pp.2637-2644. [Jensen 1991] H. M. Jensen, “The blister test for interface toughness measurement”, Engineering Fracture Mechanics, Vol. 40, no. 3, (1991) pp. 475-486. [Jensen 1998] H. M. Jensen, “Analysis of mode mixity in blister test”, International journal of Fracture, V94, (1998) pp. 79-88. [Lee 2003] C. Y. Lee, “Adhesion strength between dielectric and electrode materials”, Master Thesis, National Taiwan University (Taiwan) (2003). [Lee 2006] C.Y. Lee, M. Dupeux, W.H. Tuan, “Adhesion strength of Ag/BaTiO3 interface” Scripta Materialia, 54 (2006) pp.453–457. [Mougin 2002] J. Mougin, M. Dupeux, A. Galerie, L. Antoni, “Inverted blister test to mesure adhesion energy of thermal oxide scales on metals or alloys” Materials Science and Technology, 18, (2002) pp.1217-1220. [Mougin 2003] J. Mougin, M. Dupeux, L. Antoni, A. Galerie, “Adhesion of thermal oxide scales grown on ferritic stainless steels measured using the inverted blister test ” Materials Science and engineering A, 359, (2003) pp.44-51. [Shirani 1998] A. Shirani, K. M. Liechti, “A calibrated fracture process zone model for thin film blistering,” International Journal of Fracture, 93 (1-4) (1998) pp.281-314. [Sizemore 1995] J. Sizemore, R. J. Hohlfelder, J. J. Vlassak, W. D. Nix, “Measuring the adhesion of diamond thin films to substrates using the blister test” Materials Research Society Symp. Proc. 383, (1995) pp.197-207. [Suo 1990] Z. Suo, and J.W. Hutchinson, “Interface crack between two elastic layers” International Journal of Fracture, 43, (1990) pp.1-18. [Taheri 2000] N. Taheri, N. Mohammadi, N. Shahidi, “An automatic instrument for measurement of interfacial adhesion of polymeric coatings,” Polymer Testing, 19 (2000) pp.959–966. [Volinsky 2002] A. A. Volinsky, N. R. Moody, W. W. Gerberich. “Interfacial toughness measurement for thin films on substrate” Acta Materialia, 50 (2002) pp.441-466. [Wan 1998] K.T. Wan, S. C. Lim, “The bending to stretching transition of a pressurized blister test” International journal of fracture, 92 (1998) pp.L43-L47. [Wan 2000] K. T. Wan, “A novel blister test to investigate thin film delamination at elevated temperature,” International Journal of Adhesion and Adhesives, 20 (2000) pp.141-143. [Wang 1999] C. WANG, “Measurements of Interfacial Strength from the Blister Test” Journal of Applied Polymer Science, Vol. 73, (1999) pp.1899–1912. [Williams 1997] J. G.. Williams, “Energy release rates for the peeling of flexible membranes and the analysis of blister test” International journal of fracture, 87 (1997) pp.265-288. [Zhou 2003] Y. C. Zhou, T. Hashida, C.Y. Jian, “Determination of interface fracture toughness in thermal barrier coating system by blister test” Transactions of the ASME, V125 (2003) pp.176-182. [Anstis 1981] G. R. Anstis, P. Chantikul, B. R. Lawn, D. B. Marshall, “A critical evaluation of indentation technique for measuring fracture toughness: I. Direct crack measurements” Journal of the American Ceramic Society, Vol. 64, No. 9, (1981) pp.533-538. [Bull 2005] S. J. Bull, “Nanoindentation of coatings” Journal of Physics D: Applied Physics, 38 (2005) pp.393-413. [Chantikul 1981] P. Chantikul, G. R. Anstis, B. R. Lawn, D. B. Marshall, “A critical evaluation of indentation technique for measuring fracture toughness: II. Strength method” Journal of the American Ceramic Society, Vol. 64, No. 9, (1981) pp.539-543. [Chan 2006] K. S. Chan, H. Ji, X. Wang, S. J. Hudak Jr, B. R. Lanning, “Mechanical properties and interface toughness of FeCo thin films on Ti-6Al-4V” Materials Science and engineering A, 422 (2006) pp.298-308. [Chicot 1996] D. Chicot, P. Demarecaux, J. Lesage “Apparent interface toughness of substrate and coating couples from indentation tests” Thin Solid Films, 283 (1996) pp.151-157. [Choulier 1998] D. Choulier, “Contribution à l’étude de l’adhérence de revetements projetés à la torche à plasma. Modélisation et utilisation d’un test d’indentation à l’interface” Thése de doctorat, Université de Technologie de Compiégne (1998). [Demarecaux 1996] P. Demarecaux, D. Chicot, J. Lesage, “Interface indentation test for the determination of adhesive properties of thermal sprayed coatings” Journal of Materials Science Letters, 15 (1996) pp.1377-1380. [Engle 1983] P. A. Engle, G. C. Pedroza, “Indentation-debonding test for adhered thin polymer layers” Adhesion Aspects of Polymeric Coatings, K. L. Mittal, Ed. (Plenum Press, New York, 1983 ) pp.583. [Elizalde 2003] M. R. Elizalde, J. M. Sanchez, J. M. Martinez-Esnaola, D. Pantuso, T. Scherban, B. Sun, G. Xu, “Interfacial fracture induced by cross-sectional nanoindentation in metal-ceramic thin film structures” Acta Materialia, 51, (2003) pp.4295-4305. [Hutchinson 1992] J.W. Hutchinson, Z. Suo, “Mixed mode cracking in layer materials” Advances in Applied Mechanics, 29 (1992) pp.63-191. [Jensen 1991] H. M. Jensen, “The blister test for interface toughness measurement”, Engineering Fracture Mechanics, Vol. 40, no. 3, (1991) pp. 475-486. [Latella 2002] B. A. Latella, T. W. Nicholles, D. J. Cassidy, C. J. Barbé, G. Triani, “Evaluation of interfacial toughness and bond strength of sandwiched silicon structure” Thin Solid Films, 411 (2002) pp.247-255. [Lesage 1993] J. Lesage, P. Demarecaux, O. Bartier, G. Mesmacque, “détermination de l‘adhérence par le test d’indentation interfaciale” La Revue de métallurgie-CIT/Science et Génie des matériaux, (1993) pp.1655-1663. [Lesage 1999] J. Lesage, D. Chicot, D. Judas, M. Zampronio, P. Araujo, P. E. V. de Miranda, “Mesures par indentation interfaciale de l’adhérence de revetements NiCr projetés thermiquement” Matériaux et Techniques, 9-10 (1999) pp.29-34. [Lesage 2001] J. Lesage, D. Chicot, “Hardness and adhesion of coating” Revista de la Facultad de Ingenieria de la U.C.V., Vol. 16, No. 1 (2001) pp.33-38. [Li 2006] X. F. Li, “Effects of an elastic substrate on the interfacial adhesion of thin films” Surface and Coatings Technology, 200 (2006) pp.5003-5008. [Marshall 1984] D. B. Marshall, A.G. Evans, “Measurement of adhesion of residually stressed thin films by indentation. I. Mechanics of interface delamination” Journal of Applied Physics, 56(10) (1984) pp.2632-2638. [Molina 2007] J. M. Molina-Aldareguia, I. Ocana, D. Gonzalez, M. R. Elizalde, J. M. Sanchez, J. M. Martinez-Esnaola, J. Gil-Sevillano, T. Scherban, D. Pantuso, B. Sun, G. Xu, B. Miner, J. He, J. Maiz, “Adhesion studies in integrated circuit interconnect structures” Engineering Failure Analysis, 14 (2007) pp.349–354. [Ocana 2006] I. Ocana, J. M. Molina-Aldareguia, D. Gonzalez, M. R. Elizalde, J. M. Sanchez, J. M. Martinez-Esnaola, J. Gil Sevillano, T. Scherban, D. Pantuso, B. Sun, G. Xu, B. Miner, J. He, J. Maiz, “Fracture characterization in patterned thin films by cross-sectional nanoindentation” Acta Materialia, 54 (2006) 3453–3462. [Qi 2003] Y. H. Qi, P. Bruckel, P. Lours, “Interfacial toughness of the nickel-nickel oxide system” Journal of Materials Science Letters, 22 (2003) pp.371-374. [Richard 1996] C. S. Richard, G. Béranger, J. Lu, J. F. Flavenot, “The influences of heat treatments and interdiffusion on the adhesion of plasma-sprayed NiCrAlY coatings” Surface and Coating Technology, 82 (1996) pp. 99-109. [Roy 2006] S. Roy, E. Darque-Ceretti, E. Felder, H. Monchoix, “ Mesure de l’adhérence de couches minces de la microélectronique par nanoindentation sur coupe et nano-rayure” Communication au colloque, Féderation Française des matériaux Dijon (France) 13-17 Nov. 2006. [Sanchez 1999] J. M. Sanchez, S. El-Mansy, B. Sun, T. Scherban, N. Fang, D. Pantuso, W. Ford, M. R. Elizalde, J. M. Martinez-Esnaola, A. Martin-Meizoso, J. Gil-Sevillano, M. Fuentes, J. Maiz. “Cross-sectional nanoindentation: a new technique for thin film interfacial adhesion characterization” Acta Materialia, 47, (1999) pp.4405-4413. [Scherban 2003] T. Scherban, D. Pantuso, B. Sun, S. El-Mansy, J. Xu, M. R. Elizalde, J. M. Sanchez, J. M. Martinez-Esnaola, “Characterization of interconnect interfacial adhesion by cross-sectional nanoindentatioin” International Journal of Fracture, 119/120 (2003) pp.421-429. [Suo 1990] Z. Suo, and J.W. Hutchinson, “Interface crack between two elastic layers” International Journal of Fracture, 43, (1990) pp.1-18. [Toonder 2002] J. der Toonder, J. Malzbender, G. de With, R. Balkenende, “Fracture toughness and adhesion energy of sol-gel coatings on glass” Journal of Materials Research, 17 (2002) pp.224-233. [Volinsky 2002] A. A. Volinsky, N. R. Moody, W. W. Gerberich, “Interfacial toughness measurements for thin films on substrates” Acta Materialia, 50 (2002) pp.441–466. [Zhang 1994] J. Zhang, J. J. Lewandowski, “Interfacial fracture toughness measurement using indentation” Journal of Materials Science, 29 (1994) pp.4022-4026 [Zhen 2004] X. J. Zheng, S. F. Deng, Y. C. Zhou, X. Tan, P. Jiang, “Plate model to evaluate interfacial adhesion of anisotropy thin film in CSN test” Journal of Materials Science Letters, 39 (2004) pp.4013-4016. [Zhen 2005] X. J. Zheng, Y. C. Zhou, “Investigation of an anisotropic plate model to evaluate the interface adhesion of thin film with cross-sectional nanoindentation method ” Composites Science and Technology, 65 (2005) 1382–1390. [Fringe 2000] Fringe Analysis, Version 2.5, HOLO 3, Centre régional d’Innovation et de Transfert de Technologies, Saint Louis, France (2000). [Gasvik 1995] K. J. Gasvik, “Optical Metrology” ISBN 0-471-95528-0 (1995). [Greivenkamp 1992] J. E. Greivenkamp, J. H. Bruning, “Phase Shifting Interferometry”. Optical shop testing, second edition, edited by Daniel Malacara. ISBN 0-471-52232-5 (1992). [Hohlfelder 1997] R. J. Hohlfelder, H. Luo, J. J. Vlassak, C.E.D. Chidsey, W.D.Nix, “Measuring interfacial toughness with the blister test” Materials Research Society Symp. Proc. 436, (1997) pp.115-120. [Hsu 2002] Y. J. Hsu, Y. H. Chang, Y. L. Chai, G. J. Chen, “Residual stress and thermal stability of the Fe–Ni–Cr/Invar bimetal membrane used for micro-actuation,” Thin Solid Films, 418 (2002) pp.189–196. [Taheri 2000] N. Taheri, N. Mohammadi, N. Shahidi, “An automatic instrument for measurement of interfacial adhesion of polymeric coatings,” Polymer Testing, 19 (2000) pp.959–966. [Wang 1999] C. Wang, “Measurements of Interfacial Strength from the Blister Test” Journal of Applied Polymer Science, Vol. 73, (1999) pp.1899–1912. [Wang 2002] S. H. Wang, C. J. Tay, C. G. Quan, H. M. Shang, “Investigation of membrane deformation by a fringe projection method” Applied Optics, v.22 n.1 (2002) pp.101-107. [Dupeux 1998] M. Dupeux, A. Bosseboeuf, “Application of the blister test to adhesion envergy measurements in metal / ceramic film-on-substrate systems,” Interfacial Science in Ceramic Jointing, (1998) pp.319-327. [Felder 2003] E. Felder, E. Darque-Ceretti, Adhésion et Adhérence, CNRS Edt., Paris, 2003. [ImageJ] ImageJ, http://rsb.info.nih.gov/ij/ [Kinemuchi 2005] Y. Kinemuchi, S. Uchimura, K. Watari, “Centrifugal sintering of BaTiO3/Ni layered ceramics” Journal of the European Ceramics Society, 25 (2005) pp. 2223-2226. [Lee 2003] S. G. Lee, U. Paik, Y. I. Shin, J.W. Kim, Y. G. Jung, “Control of residual stresses with post process in BaTiO3-based Ni-MLCCs” Materials and Design 24 (2003) pp. 169-176. [Lee 2006] C. Y. Lee, M. Dupeux, W. H. Tuan, “Adhesion strength of Ag/BaTiO3 interface” Scripta Materialia 54 (2006) pp.453–457. [Lesage 2001] J. Lesage, D. Chicot, “Hardness and adhesion of coating” Revista de la Facultad de Ingenieria de la U.C.V., Vol. 16, No. 1 (2001) pp.33-38. [Li 2006] X. F. Li, “Effects of an elastic substrate on the interfacial adhesion of thin films” Surface and Coatings Technology 200 (2006) pp.5003-5008. [Lin 2004] Y. C. Lin, J.H Jean, “Constrained Sintering of Silver Circuit Paste”, J. Am. Ceram. Soc., 87 (2004) pp.187-91. [Radi 2001] E. Radi, M. Cristina Porcu. “Near-tip fields for quasi-static crack growth along the interface between a porous-ductile material and a rigid substrate”, International Journal of Solids and Structures, 38 (2001) pp.8235-8258. [Sanchez 1999] J. M. Sanchez, S. El-Mansy, B. Sun, T. Scherban, N. Fang, D. Pantuso, W. Ford, M. R. Elizalde, J. M. Martinez-Esnaola, A. Martin-Meizoso, J. Gil-Sevillano, M. Fuentes, J. Maiz. “Cross-sectional nanoindentation: a new technique for thin film interfacial adhesion characterization” Acta Materialia 47, (1999) pp.4405-4413. [Shin 2003] Y. I.. Shin, K. M. Kang, Y. G.. Jung, J. G.. Yeo, S. G. Lee, U. Paik, “Internal stresses in BaTiO3/Ni MLCCs”, Journal of the European Ceramic Society 23 (2003) pp.1427-1434. [Skriver 1992]H. L. Skriver, N. M. Rosengaard, “Surface energy and work function of elemental metals”, Physical Review B, V.46, N.11, (1992) pp.7157-7168. [Sugihara 1990]S. Sugihara, K. Okazaki, Application of Ferroelectrics, Proceedings of the 7th IEEE International Symposium, (1990), pp. 432–434. [Toonder 2002] J. der Toonder, J. Malzbender, G. de With, R. Balkenende, “Fracture toughness and adhesion energy of sol-gel coatings on glass” Journal of Materials Research, 17 (2002) pp.224-233. [Volinsky 2002] A. A. Volinsky, N. R. Moody, W. W. Gerberich, “Interfacial toughness measurements for thin films on substrates” Acta Materialia 50 (2002) pp.441–466. [Yang 2005] G.. Y. Yang, E. C. Dickey, C. A. Randall, “Interfacial reactions between Ni and BaTiO3: An Analytical Transmission Electron Microscopy Study”, Microsc Microanal 11 (Suppl 2), (2005) pp.232-233. | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/28348 | - |
| dc.description.abstract | 本論文是研究金屬與陶瓷界面的機械強度性質，陶瓷是使用商用鈦酸鋇粉，金屬部分為銀膏及鎳膏所製成的金屬膜，膜的成型方是為網版印刷法。使用不同表面性質的緻密鈦酸鋇做為基板，金屬膏覆蓋在陶瓷基板上並在不同溫度下燒結，試片加工製成特殊形狀以符合Blister test的試片形狀要求。
Blister test可以得到量化的介面強度，並可由此得出介面裂縫延伸的所需的能量，在實驗過程中會伴隨著塑性變形，在本實驗中我們提出一個簡單的處理方法以減去塑性變形的影響。在不同銀膠燒結溫度下，銀及鈦酸鋇的界面強度落在4 -7 J/m2 之間，鎳及鈦酸鋇的界面強度約為1 J/m2。 本實驗中嘗試發展三種 indentation 方法來量測相同的金屬與陶瓷界面的強度，經由 normal及 interface indentation 所得出的銀與碳酸鋇的界面強度約為 0.5 J/m2. 第三種測試方法Cross-sectional indentation test 為本研究中發展出的全新測試方法，並提出一種新的理論分析。依照不同的分析模型，所得出的銀與碳酸鋇的界面強度約為 1到3 J/m2. | zh_TW |
| dc.description.abstract | The present study investigates the mechanical strength of metal/oxide interface. Ceramic was commercial available BaTiO3. Silver and nickel pastes are used as the metal materials. The metal film was prepared by screen-printing. Specimens with Ag or Ni layer, fabricated at different sintering temperatures, covering dense BaTiO3 substrates with different surface roughness have been prepared with a special geometry appropriate for blister and indentation testing.
The blister test technique allows numerical estimation of interfacial adhesion strength through determination of the interfacial crack propagation energy. A simple method is proposed to correct for generalized plastic straining of silver layer. The average value of Ag/BaTiO3 adhesion strength ranges from 4 J/m2 to 7 J/m2 according to the firing temperature of Ag. For Ni film fired at 1200°C for 2 h on dense barium titanate, the average value is about 1 J/m2 Three indentation tests are developed to measure critical energy release rate of the same metal/oxide interfaces. The average Gci of Ag/BaTiO3 interface is about 0.5 J/m2 according to normal and interface indentation tests. Cross-sectional indentation test has been also successfully performed and a new model for analysis of its results is developed. The average Gci of Ag/BaTiO3 interfaces are obtained from 1 J/m2 to 3 J/m2 according to the models. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-13T00:05:46Z (GMT). No. of bitstreams: 1 ntu-96-D92527006-1.pdf: 10614705 bytes, checksum: c78a2fda2713a87d6c6b536d00bce28f (MD5) Previous issue date: 2007 | en |
| dc.description.tableofcontents | Introduction 1
Chapter Ⅰ: Metal/Oxide Interfaces 5 1. Introduction 7 2. Metal-oxide interfaces 7 2.1. Formation of metal/oxide interface 7 2.2. Interface chemistry and atomic structure 8 2.3. Fracture behavior of metal-oxide interface 10 2.4. Metal-oxide adhesion 19 3. Metal-oxide adhesion measurement 22 3.1. Tape test 23 3.2. Pin Pull test 23 3.3. Peel test 25 3.4. Scratch test 26 3.5. Beam bending test 28 3.6. Indentation test 30 3.7. Laser spallation technique 32 3.8. Telephone cord delamination method 33 3.9. Interface indentation test 34 3.10. Cross-sectional nanoindentation test 35 3.11. Blister test 36 4. Conclusions 37 References 38 Chapter II: Interface Adhesion Measurement by Blister Test 43 1. Introduction 45 2. Development of the blister test 47 3. Mechanical analysis 51 3.1. Nomenclature 51 3.2. Criterion for debonding 52 3.3. Crack extension force 54 3.4. Near edge loads 71 3.5. Mode mixity in blister test 73 3.6. Correction for plastic work 75 4. Conclusions 78 References 80 Chapter Ⅲ: Interface Adhesion Measurement by Indentation Test 85 1. Introduction 87 2. Development of the indentation test for measuring interfacial fracture toughness 90 2.1. Development of the normal indentation test 90 2.2. Development of the interface indentation test 90 2.3. Development of the cross-sectional indentation test 91 3. Mechanical analysis 93 3.1. Normal indentation test 93 3.2. Interface indentation test 94 3.3. Cross-sectional indentation test 96 3.3.1. The Plate model 96 3.3.2. Analytical approximation (Tapered beams model) 98 3.3.3. The model of an elastic plate with elastically restrained edges 103 3.3.4. Point load model 110 4. Mode mixity of cross-sectional indentation test 111 5. Conclusions 114 References 115 Chapter Ⅳ: Experiments 121 1. Materials 123 1.1. Barium Titanate 124 1.2. Metals 125 2. Blister test 128 2.1. Blister test apparatus 128 2.1.1. Sample mounting 129 2.1.2. Data acquisition system 131 2.1.3. Theory of fringe projection method: 133 2.2. Sample preparation for Blister test 141 2.2.1. Silver (Ag)/Barium Titanate (BaTiO3) 141 2.2.2. Nickel (Ni)/Barium Titanate (BaTiO3) 145 2.2.3. Nickel (Ni)/Silver (Ag)/ Barium Titanate (BaTiO3) 147 2.2.4. Silver (Ag)/Nickel (Ni) 148 3. Indentation test 149 3.1. Indentation test apparatus 149 3.2. Sample preparation for indentation test 150 3.2.1 Interface and cross-sectional indentation test 150 3.2.2 Normal indentation test 151 4. Conclusions 151 References 153 Chapter Ⅴ: Results and Discussion 155 1. Blister test 157 1.1. Silver (Ag)/Barium Titanate (BaTiO3) 158 1.1.1. Influence of different silver film firing temperature 160 1.1.2. Influence of different substrate roughness 175 1.1.3. Influence of different substrate firing temperature 181 1.2. Nickel (Ni)/Barium Titanate (BaTiO3) 184 1.3. Nickel (Ni)/Silver (Ag)/ Barium Titanate (BaTiO3) 190 1.4. Silver (Ag)/Nickel (Ni) 193 2. Indentation test 194 2.1. Normal indentation test 195 2.2. Interface indentation test 200 2.3. Cross-sectional indentation test 204 3. Comparison between blister and indentation test 209 3.1. Comparison between Gci from normal indentation test with the values from blister test. 209 3.2. Comparison between Gci from interface indentation test with the values from blister test. 210 3.3. Comparison between Gci from cross-sectional indentation test with the values from blister test. 210 4. Conclusions 211 4.1. Silver (Ag)/Barium Titanate (BaTiO3) 211 4.2. Nickel (Ni)/Barium Titanate (BaTiO3) 212 4.3. Nickel (Ni)/Silver (Ag)/ Barium Titanate (BaTiO3) 213 4.4. Silver (Ag)/Nickel (Ni) 213 References 214 Chapter VI: General conclusions and future work 217 Published Work 227 Appendix I 229 | |
| dc.language.iso | en | |
| dc.subject | interface indentation test | zh_TW |
| dc.subject | 鈦酸鋇 | zh_TW |
| dc.subject | 接著強度 | zh_TW |
| dc.subject | 金屬陶瓷界面 | zh_TW |
| dc.subject | blister test | zh_TW |
| dc.subject | 鎳 | zh_TW |
| dc.subject | 銀 | zh_TW |
| dc.subject | cross-sectional indentation test | zh_TW |
| dc.subject | cross-sectional indentation test | en |
| dc.subject | adhesion strength | en |
| dc.subject | metal/oxide interface | en |
| dc.subject | barium titanate | en |
| dc.subject | silver | en |
| dc.subject | blister test | en |
| dc.subject | interface indentation test | en |
| dc.subject | nickel | en |
| dc.title | 金屬/陶瓷界面工程:介電陶瓷與金屬電極之接著強度研究 | zh_TW |
| dc.title | Metal/Ceramic Interface Engineering: Adhesion Strength Measurement between Dielectric Ceramic and Electrode Metals | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 95-2 | |
| dc.description.degree | 博士 | |
| dc.contributor.advisor-orcid | ,Michel DUPEUX(Michel.Dupeux@ltpcm.inpg.fr) | |
| dc.contributor.oralexamcommittee | 黃肇瑞(Jow-Lay HUANG),Thomas PARDOEN(Thomas PARDOEN),Jacques FOULETIER(Jacques FOULETIER),Jean-Luc LOUBET(Jean-Luc LOUBET),Muriel BRACCINI(Muriel BRACCINI) | |
| dc.subject.keyword | blister test,interface indentation test,cross-sectional indentation test,銀,鎳,鈦酸鋇,金屬陶瓷界面,接著強度, | zh_TW |
| dc.subject.keyword | blister test,interface indentation test,cross-sectional indentation test,silver,nickel,barium titanate,metal/oxide interface,adhesion strength, | en |
| dc.relation.page | 233 | |
| dc.rights.note | 有償授權 | |
| dc.date.accepted | 2007-07-30 | |
| dc.contributor.author-college | 工學院 | zh_TW |
| dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
| 顯示於系所單位： | 材料科學與工程學系 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-96-1.pdf 未授權公開取用 | 10.37 MB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。