請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/27875
標題: | 部份電極壓電板之振動分析 The vibration analysis of partial electrode piezoelectric plate |
作者: | Ting-Wei Hsu 許庭瑋 |
指導教授: | 吳光鐘(Kuang-Chong Wu) |
關鍵字: | 雙電極石英晶體微天平,壓電材料,能量井效應,平台設計,有限元素分析模擬, multi-channel quartz crystal microbalance,piezoelectric materia,energy trapping effect,mesa design,finite element method analysis, |
出版年 : | 2007 |
學位: | 碩士 |
摘要: | 本文主要分成兩部份,第一部分討論QCM的平台設計(mesa design)的相關研究,第二部份將討論雙電極QCM的設計。
平台設計可增加QCM量測工作上的穩定性和靈敏度,但在特定幾何尺寸下QCM的能量井效應會有大量減少的現象,當此掉落點現象發生時,量測工作會產生頻率漂移與不準確性。我們為了避開掉落點現象出現,利用模擬的方式去找出發生時的QCM幾何尺寸,目前雖還無法找到掉落點現象真正的發生原因和統御方程式,但仍可利用模擬結果推估其發生之規律性和可能發生掉落點的尺寸。 當操作雙電極QCM時,兩電極彼此會相互影響,使得兩者的量測工作會受到干擾,產生其不準確性。本文就是找出其相互影響的頻率漂移量大小,最後再討論如何應用平台設計降低其相互影響的程度,增加量測上的穩定度。 We first discuss the effect of mesa design for QCM system. The energy trapping effect will disappear under the specific geometry of QCM, and we call dropping effect. When this phenomenon occurs, the measurement will generate a lot of frequency drift and decrease the accuracy of QCM. To avoid the phenomenon of dropping effect, we use finite element method and the numerical method to analyze the approximately geometry and the reasons for dropping effect. Until now, we can not find out the real reasons of dropping effect occurs, but we use the solution of simulations and analytic approaches to find out its regularities and possible sizes. In the model of dual-electrode QCM, one electrode will have influence on the other during operation, further reducing accuracy. Hence, this thesis is to find out the extent of impact and the corresponding relation to minimize it through the mesa design. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/27875 |
全文授權: | 有償授權 |
顯示於系所單位: | 應用力學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-96-1.pdf 目前未授權公開取用 | 704.51 kB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。