請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/27570
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 林新智 | |
dc.contributor.author | Wan-Tien Chou | en |
dc.contributor.author | 周宛瑱 | zh_TW |
dc.date.accessioned | 2021-06-12T18:10:13Z | - |
dc.date.available | 2007-11-15 | |
dc.date.copyright | 2007-11-15 | |
dc.date.issued | 2007 | |
dc.date.submitted | 2007-10-24 | |
dc.identifier.citation | 1. 洪為民,材料與社會,79 (1993) 97-102。
2. 鄭伃君,零組件雜誌,(2004) 33。 3. 鄒喜龍, 「薄膜電池」,工業材料,146 (1999) 76-79。 4. J. B. Bates, N. J. Dudney, B. Neudecker, A. Ueda and C. D. Evans, “Thin-film lithium and lithium-ion batteries”, Solid State Ionics,135 (2000) 33−45. 5. T. Handa, S. Shoji, S.Ike, S. Takeda, and T. Sekiguchi, International Conference on Sloid-State Sensors and Actuators, Chicago, June, (1997) 16–19. 6. K. Wang, X. He, L. Wang, J. Ren, C. Jiang and C. Wan, “Si, Si/Cu Core in Carbon Shell Composite as Anode Material in Lithium-ion Batteries”, Solid State Ionics, 178 (2007) 115-118. 7. Y. Liang, J. Fan, X. Xia and Z. Jia, “Synthesis and characterisation of SnO2 nano-single crystals as anode materials for lithium-ion batteries”, Materials Letters, 61 (2007) 4370–4373. 8. S. Koike , T. Fujieda, T. Sakai and S. Higuchi, “Characterization of sputtered vanadium oxide films for lithium batteries”, Journal of Power Sources, 81–82 (1999) 581–584. 9. H. Guo, H. Zhao, C. Yin and W. Qiu, “A nanosized silicon thin film as high capacity anode material for Li-ion rechargeable batteries”, Materials Science and Engineering, B131 (2006) 173-176. 10. S. Bourderau, T. Brousse and D. M. Schleich, “Amorphous silicon as a possible anode material for Li-ion batteries”, Journal of Power Sources, 81–82 (1999) 233–236. 11. J. P. Maranchi, A. F. Hepp, A. G. Evans, N. T. Nuhfer and P. N. Kumta, “Interfacial Properties of the a-Si/Cu:Active–Inactive Thin-Film Anode System for Lithium-Ion Batteries”, Journal of The Electrochemical Society, 153 (6) (2006) A1246-A1253. 12. 林振華、林振富,「充電式鋰離子電池-材料與應用」,全華科技圖書公司。 13. 黃瑞雄、顏溪成,「漫談電化學」,科學發展,359 (2002) 22-27。 14. J. Hajek, French Patent, 8 (1949) 10. 15. J. Yamaki, S. Tobishima, K. Hayashi, K. Saito, Y. Nemoto, M. Arakawa, “A consideration of the morphology of electrochemically deposited lithium in an organic electrolyte”, Journal of Power Sources, 74 (1998) 219–227. 16. J. O. Besenhard, M. Hess and P. Komeda, “Dimensionally stable Li-alloy electrodes for secondary batteries”, Solid State Ionics, 40-41 (1989) 525-529. 17. B. Scrosati, “Lithium Rocking Chair Batteries: An Old Concept”, Journal of Electrochemical Sococity, 139 (10) (1992) 2776-2781. 18. L. J. Fu, H. Liu, C. Li, Y. P. Wu, E. Rahm, R. Holze, H. O. Wu, “Surface modifications of electrode materials for lithium ion batteries”, Solid State Science, 8 (2006) 113-128. 19. R. Koksbang, J. Barker, H. Shi, M. Y. Saidi, “Cathode materials for lithium rocking chair batteries”, Solid State Ionics, 84 (1996) 1-21. 20. P. Arora, R. E. White and M. Doyle, “Capacity Fade Mechanisms and Side Reactions in Lithium-Ion Batteries”, Journal of Electrochemical society, 145 (1998) 3647-3667. 21. B. M. Winter, J. O. Besenhard, M. E. Spahr and P. Novµk, “Insertion Electrode Materials for Rechargeable Lithium Batteries”, Advanced Materials, 10 (1998) 725-763. 22. A. Yoshino, “These Ten Years and Feature of Rechargeable Battery Materials” , (2003) 110. 23. A. Mabuchi, K. Tokumitsu, H. Fujimoto and T. Kaush, “Charge-Discharge Characteristics of the Mesocarbon Miocrobeads Heat-Treated at Different Temperatures”, Journal of Electrochemical Society,142 (1995) 1041-1046. 24. 陳金銘,工業材料,133 (1997) 85。 25. H. Shi, J. Barker, M. Y. Saidi and R. Koksbang, “Structure and Lithium Intercalation Properties of Synthetic and Natural Graphite”, Journal of Electrochemical Society, 143 (1996) 3466-3472. 26. 費定國、李日琪,「鋰離子電池陽極材料開發」,工業材料,165 (2000) 152-163。 27. 姚慶意、陳金銘,「鋰離子二次電池負極材料介紹」,工業材料,100 (1996) 57。 28. J. R. Dahn, A. K. Sleigh, H. Shi, J. N. Reimers, Q. Zhong and B. M. Way, “Dependence of the Electrochemical Intercalation of Lithium in Carbons on the Crystal Structure of the Carbon”, Electrochimica Acta, 38 (1993) 1179. 29. E. Buiel and J. R. Dahn, “Li-insertion in hard carbon anode materials for Li-ion batteries”, Electrochimica Acta, 45 (1999) 121-130. 30. J. O. Besenhard, M. Winter, J. Yang, and W. Biberacher, “Filming mechanism of lithium-carbon anodes in organic and inorganic electrolytes”, Journal of Power Sources, 54 (1995) 228-231. 31. E. Peled, “The Electrochemical Behavior of Alkali and Alkaline Earth Metals in Nonaqueous Battery Systems-The Solid Electrolyte Interphase Model”, Journal of Electrochemical Society, 126 (1979) 2047-2051. 32. J. R. Dahn, T. Zheng, Y. Liu and J. S. Xue, “Mechanisms for Lithium Insertion in Carbonaceous Materials”, Science, 270 (1995) 590-593. 33. 林育潤,陳金銘,工業材料,215 (2004) 87。 34. R. A. Huggins, “Lithium alloy negative electrodes formed from convertible oxides”, Solid State Ionics, 113-115 (1998) 57-67. 35. 蔡哲正、陳金銘,工業材料,158 (2000) 127-131。 36. L. Y. Beaulieu, K. W. Eberman, R. L. Turner, L. J. Krause and J. R. Dahn, “ Colossal Reversible Volume Changes in Lithium Alloys”, Electrochemical and Solid-State Letters, 4 (9)(2001) A137-A140. 37. J. O. Besenhard, J. Yang and M. Winter, “Will advanced lithium-alloy anodes have a chance in lithium-ion batteries?”, Journal of Power Sources, 68 (1997) 87-90. 38. J. Yang, M. Winter and J. O. Besenhard, “Small particle size multiphase Li-alloy anodes for lithium-ion-batteries”, Solid State Ionics, 90 (1996) 281-287. 39. H. Li, L. Shi, Q. Wang, L. Chen and X. Huang, “Nano-alloy anode for lithium ion batteries”, Solid State Ionics, 148 (2002) 247-258. 40. M. Yoshio, H. Wang, K. Fukuda, T. Umeno, N. Dimov and Z. Ogumi, “Carbon-Coated Si as a Lithium-Ion Battery Anode Material” , Journal of Electrochemical Society, 149 (2002) A1598-A1603. 41. H. Jung, M. Park, Y. G. Yoon, G. B. Kim and S. K. Joo, “Amorphous silicon anode for lithium-ion rechargeable batteries”, Journal of Power Sources, 115 (2003) 346–351. 42. N. Tamura, R. Ohshita, M. Fujimoto and M. Kamino, “Advanced Structures in Electrodeposited Tin Base Negative Electrodes for Lithium Secondary Batteries”, Journal of The Electrochemical Society, 150 (2003) A679-A683. 43. H. J. Ahn, Y. S. Kim, W. B. Kim, Y. E. Sung and T. Y. Seong, “Formation and characterization of Cu–Si nanocomposite electrodes for rechargeable Li batteries”, Journal of Power Sources, 163 (2006) 211-214. 44. K. D. Kepler, J. T. Vaughey and M. M. Thackeray, “LiXCu6Sn5(0<x<13):An Intermetallic Insertion Electrode For Rechargeable Lithium Batteries”, Electrochemical Solid-State Letter, 2 (1999) 307. 45. F. S. Ke, L. Huang, J. S. Cai, S. G. Sun, “Electroplating synthesis and electrochemical properties of macroporous Sn-Cu alloy electrode for lithium-ion batteries”, Electrochimica Acta, 52 (2007) 6741-6747. 46. B. C. Kim, H. Uono, T. Satou, T. Fuse, T. Ishihara, M. Ue and M. Senna, “Cyclic Properties of Si-Cu/Carbon Nanocomposite Anodes for Li-Ion Secondary Batteries”, Journal of The Electrochemical Society, 152 (3) (2005) A523-A526. 47. Y. M. Kang, M. S. Park, M. S. Park, M. S. Song and J. Y. Lee, “A relation between enhanced Li ion transfer and the improvement in electrochemical performance of a Si-Cu-carbon composite”, Journal of Power Sources, 162 (2006) 1336-1340. 48. P. Zuo, G. Yin, X. Hao, Z. Yang, Yulin Ma and Zhenguo Gao, “Synthesis and electrochemical performance of Si/Cu and Si/Cu/graphite composite anode”, Materials Chemistry and Physics, 104 (2007) 444-447. 49. K. Wang, X. He, L. Wang, J. Ren, C. Jiang and C. Wan, “Si, Si/Cu core in carbon shell composite as anode material in lithium-ion batteries”, Solid State Ionics, 178 (2007) 115-118. 50. C. S. Johnson, J. T. Vaughey, M. M. Thackeray, T. Sarakonsri, S. A. Hackney, L. Fransson, K. Edstrom and J. O. Thomas, “Electrochemistry and in-situ X-ray diffraction of InSb in lithium batteries”, Electrochemistry Communications, 2(2000) 595–600. 51. T. Sarakonsri, C. S. Johnson, S. A. Hackney and M. M. Thackeray, “Solution route synthesis of InSb, Cu6Sn5 and Cu2Sb electrodes for lithium batteries”, Journal of Power Sources, 153 (2006) 319–327. 52. H. Kim, B. Park, H. J. Sohn and T. Kang, “Electrochemical characteristics of Mg–Ni alloys as anode materials for secondary Li batteries”, Journal of Power Sources 90 (2000) 59–63. 53. G. A. Roberts, E. J. Carins, J. A. Reimer, “Magnesium silicide as anegativeelectrode material for lithium-ion batteries”, Journal of Power Sources, 110 (2002) 424–429. 54. H. Li, X. Huang, L. Chen, Z. Wu and Y. Liang, “A High Capacity Nano-Si Composite Anode Material for Lithium Rechargeable Batteries”, Electrochemical Solid State Letters, 2 (11) (1999) 547-549. 55. Z. S. Wen, J. Yang, B. F. Wang, K. Wang and Y. Liu, “High capacity silicon/carbon composite anode materials for lithium ion batteries”, Electrochemistry Communications, 5 (2003) 165-168. 56. Y. Liu, K. Hanai, J. Yang, N. Imanishi, A. Hirano and Y. Takeda, “Morphology-stable silicon-based composite for Li-intercalation”, Solid State Ionics, 168 (2004) 61-68. 57. J. Yang, M. Winter, J. O. Besenhard, “Small particle size multiphase Li-alloy anodes for lithium-ion-batteries”, Solid State Ionics, 90 (1996) 281-287. 58. K. Wasa, M. Kitabatake, H. Adachi, Thin Film Materials Technology,William Andrew. 59. G. N. Strauss, W. Lechner and H. K. Pulker, “Gas pressures influence on the optical and mechanical properties of Ta2O5 film produced by reactive low voltage ion plating (RLVIP)”, Thin Solid Films, 351 (1999) 53-56. 60. R. A. Huggins, “Lithium alloy negative electrodes formed from convertible oxides”, Solid State Ionics, 113-115 (1998) 57-67. 61. W. R. Liu, Z. Z. Guo, W. S. Young, D. T. Shieh, H. C. Wu, M. H. Yang and N. L. Wu, “Effect of electrode structure on performance of Si anode in Li-ion batteries : Si particle size and conductive additive”, Journal of Power Sources, 140 (2005) 139-144. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/27570 | - |
dc.description.abstract | 近年來可攜性電子產品的使用率越來約高,如何減輕可攜式電子產品的重量,電池就成了關鍵性的元素,而目前常見的電池當中以鋰離子電池最具發展性,因為鋰離子電池不論是在單位體積或單位重量都具有較高的電容量,然而如何突破現有的電容量,使其具有更高的使用效率,鋰離子電池內部電極材料就佔了不可或缺的因素。
本研究主要探討鋰離子電池負極材料部份,藉由雙靶磁控共濺渡沉積銅矽薄膜,並藉由調整工作壓力以及改變基材的粗糙度來改善鍍膜內應力以及附著性,藉此減緩鍍膜在充放電的過程中所造成的崩裂,以大幅提升薄膜的電化學性能。研究中發現,當工作壓力較小時,鍍膜較不易產生微小顆粒,且此鍍膜具有較大的壓應力,在充放電測試中,具有較大的放電電容量。在改變基材粗糙度方面,當不鏽鋼基板經1000號砂紙研磨後,沉積的鍍膜經過10次充放電後,能有效地減緩裂縫的產生,鍍膜較不易脫離基板,故可降低不可逆電容量。另外添加微量的非活性銅元素,以形成Cu5Si合金,此合金不會參與反應,亦可緩衝充放電時的體積變化,在循環壽命測試中,添加微量銅元素,展現了極佳的循環能力。 | zh_TW |
dc.description.abstract | In the portable electronics industry, the recent trend has been toward smaller and more powerful devices. This requires batteries made from materials with very high energy densities. However, to meet the ever-increasing energy demands of modern devices, researchers are seeking new materials that will lead to smaller, lighter, and longer-lasting batteries.
Cu5Si/Si thin-film anodes have been prepared using radio frequency driven magnetron sputtering. With appropriate working pressure during deposition, film residual stress and surface morphology can be well controlled. Field-emission scanning electron microscopy and bending beam apparatus were used to characterize the surface morphology and residual stress, respectively. Cu5Si/Si thin-film anodes deposited with low working pressure can develop smooth surface morphology and large compressive stress. The electrochemical properties of the thin-film anodes deposited under various conditions were measured and compared. The Cu5Si/Si thin-films deposited at a working pressure of 1 mTorr demonstrated that the first charge and discharge capacities of the materials were about 2518 mAh/g and 2343 mAh/g, respectively, with 93% of the first cycle efficiency. The cycle life performance of this material showed that the initial discharge capacity of 2343 mAh/g could be maintained up to 86% after 50 cycles. The cycling performance of the Cu5Si/Si thin-film anodes were improved significantly. | en |
dc.description.provenance | Made available in DSpace on 2021-06-12T18:10:13Z (GMT). No. of bitstreams: 1 ntu-96-R94527023-1.pdf: 3732976 bytes, checksum: 244640d521578957b6f023f790e2a5fb (MD5) Previous issue date: 2007 | en |
dc.description.tableofcontents | 口試委員審定書 I
誌 謝 II 中文摘要 III Abstract IV 圖目錄 VII 表目錄 IX 第一章 緒論 1 1.1薄膜電池概論 1 1.2 研究動機 3 第二章 文獻回顧 6 2.1 電池的起源 6 2.2 鋰電池與鋰離子二次電池的發展與原理 7 2.2.1鋰電池的發展與原理 7 2.2.2 鋰離子二次電池的發展與原理 8 2.3 負極材料 10 2.3.1 碳系材料 10 2.3.2 鋰合金材料 13 2.3.3 銅矽材料 14 第三章 實驗方法 26 3.1 實驗流程 26 3.2 薄膜試片製備 26 3.3薄膜分析與量測技術 27 3.3.1 低掠角X光繞射儀 (Grazing Incidence X-ray Diffractrometer) 27 3.3.2 掃描式電子顯微鏡 (Scanning Electron Microscope) 28 3.3.3 感應耦合電漿原子放射光譜分析(Inductively Coupled Plasma-Atomic Emission Spectrometer) 29 3.3.4 薄膜應力分析 29 3.4 薄膜電化學特性分析 30 3.4.1 負極之電極製作 30 3.4.2 鈕扣型電池組裝 30 3.4.3 電池充放電性能測試 31 3.4.4 循環伏安測試 31 第四章 結果與討論 39 4.1 膜厚量測 39 4.2 薄膜微結構與表面形態 39 4.2.1 工作壓力之影響 39 4.2.2 基材粗糙度之影響 40 4.3 結晶結構 40 4.4 薄膜成分鑑定 41 4.4.1 工作壓力的影響 41 4.4.1 改變銅含量 41 4.5 薄膜應力 41 4.6 銅矽薄膜之電化學行為 42 4.6.1 工作壓力的影響 42 4.6.1.1 充放電性質 42 4.6.1.2氧化還原反應 43 4.6.2 基材粗糙度改變之充放電性質 44 4.6.3 銅含量改變之充放電性質 45 第五章 結論 69 參考文獻 70 | |
dc.language.iso | zh-TW | |
dc.title | 共濺鍍銅矽薄膜負極電化學特性之研究 | zh_TW |
dc.title | The electrochemical proporties of co-sputtered Cu5Si thin film anodes | en |
dc.type | Thesis | |
dc.date.schoolyear | 96-1 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 邱國峰,李源弘 | |
dc.subject.keyword | 雙靶共濺鍍,非晶矽,工作壓力,表面粗糙度,非活性元素, | zh_TW |
dc.subject.keyword | Co-sputter,Amorphous Si,Working pressure,Roughness,Inactive metal, | en |
dc.relation.page | 75 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2007-10-24 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-96-1.pdf 目前未授權公開取用 | 3.65 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。