請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/27441
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 陳復國 | |
dc.contributor.author | Chia-Wei Hou | en |
dc.contributor.author | 侯佳緯 | zh_TW |
dc.date.accessioned | 2021-06-12T18:05:06Z | - |
dc.date.available | 2016-08-10 | |
dc.date.copyright | 2011-08-10 | |
dc.date.issued | 2011 | |
dc.date.submitted | 2011-08-09 | |
dc.identifier.citation | [1] K. Mori, S. Maki and Y. Tanaka, “Warm and Hot Stamping of Ultra High Tensile Strength Steel Sheets Using Resistance Heating”, CIRP Annals Manufacturing Technology, 54, pp. 209-212, 2005.
[2] T. Svec, M. Gruner and M. Merklein, “FE-Simulation of the Heat Transfer by Defined Cooling Conditions During the Hot Stamping Process”, Key Engineering Materials, 473, pp. 699-706, 2011. [3] C. Wang, B. Zhu, Y. Zhang, J. Shi and H. Dong, “Hot-Stamping Process Simulation and Optimize Research for Collision Beam of Automobile Door”, Advanced Materials Research, 201-203, pp. 3-8, 2011. [4] Z. Zhang, Z. Ye, Y. Zhang and J. Li, “Numerical Analysis on Hot Stamping of B Pillar Reinforcement of Automobiles”, Advanced Materials Research, 97-101, pp. 282-285, 2010. [5] Z. Xing, J. Cui, H. Liu and C. Li, “Numerical and Experimental Investigation into Hot Stamping of High Strength Steel Sheet for Auto B Pillar Reinforced Panel”, Advanced Materials Research, 129-131, pp. 322-327, 2010. [6] H. Yu, L. Bao, Y. Deng and W. Cao, “Forming Response of Ultra High Strength Steel Sheet to Stamping Speed During Hot Forming”, Advanced Materials Research, 160-162, pp.123-129, 2011. [7] H. So and H. Hoffmann, “Design of Hot Stamping Tools and Blanking Strategies of Ultra High Strength Steels”, Springer Proceedings in Physics, 124, pp.315-325, 2008. [8] H. Steinbeiss, H. So T. Michelitsch and H. Hoffmann, “Method for Optimizing The Cooling Design of Hot Stamping Tools”, Production Engineering, 1, pp.149-155, 2007. [9] H. Hoffmann, H. So and H. Steinbeiss, ”Design of Hot Stamping Tools with Cooling System”, CIRP Annals Manufacturing Technology, 56, pp.269-272, 2007. [10] N. Ma, P. Hu and Z. Zhang, “Research on a New Type of Metal Composite Material in Hot Forming and It’s Application”, Advanced Materials Research, 156-157, pp.582-591, 2011. [11] L. Zhang, G. Zhao and H. Li, “Numerical Simulation Investigation on the Temperature Field Distribution and Variations in Hot Stamping Process”, Applied Mechanics and Materials, 44-47, pp.992-996, 2011. [12] M. Naderi, M. Ketabchi, M. Abbasia and W. Bleck, “Analysis of microstructure and mechanical properties of different high strength carbon steels after hot stamping”, Journal of Materials Processing Technology, 211, pp.1117-1125, 2011 [13] L. F. He, G. Q. Zhao, H.P. Li and N. Xiang, “Research on Mechanical Properties of 22MnB5 Steel Quenched in a Steel Die”, Journal of Shanghai Jiaotong University, 16, pp.129-132, 2011. [14] M. Naderi, V. Uthaisangsuk, U. Prahl and W. Bleck, “A Numerical and Experimental Investigation into Hot Stamping of Boron Alloyed Heat Treated Steels”, Steel Research International, 79, pp.77-84, 2009. [15] K. Mori and Y. Okuda, “Tailor Die Quenching in Hot Stamping for Producing Ultra-High Strength Steel Formed Parts Having Strength Distribution”, CIRP Annals - Manufacturing Technology, 59, pp.291-294, 2010. [16] H. H. Bok, M. G. Lee, H. D. Kim and M. B. Moon, ” Thermo-Mechanical Finite Element Analysis Incorporating the Temperature Dependent Stress-Strain Response of Low Alloy Steel for Practical Application to the Hot Stamped Part”, Metals And Materials International, 16, pp.185-195, 2010. [17] L. He, G. Zhao and H. Li, “Measurement and Analysis of Time-Temperature- Transformation curves of Boron Steel 22MnB5”, Applied Mechanics and Materials, 29-32, pp.484-489, 2010. [18] C. Lei, Z. Xing and H. Fu, “Effect of Dies Temperature on Mechanical Properties of Hot Stamping Square-cup Part for Ultra High Strength Steel”, Advanced Materials Research, 129-131, pp.390-394, 2010. [19] P. Akerstrom and M. Oldenburg, “Austenite decomposition during press hardening of a boron steel-Computer simulation and test”, Journal of Materials Processing Technology, 174, pp.399–406, 2006. [20] M. Geiger, M. Merklein and C. Hoff, “Basic Investigations on the Hot Stamping Steel 22MnB5”, Advanced Materials Research, 6-8, pp.795-804, 2005. [21] Z. W. Xing, J. J. Cui, H. S. Liu, C. F Li, “Numerical and Experimental Investigation into Hot Stamping of High Strength Steel Sheet for Auto B Pillar Reinforced Panel”, Advanced Materials Research, 129-131, pp.322-327, 2010. [22] L. Wang, T. Zhou, L. Wang and X. Yang,” Investigation on the Numerical Simulation of Hot Stamping of Advanced High Strength Steels”, Advanced Materials Research, 189-193 pp.2144-2147, 2011. [23] Z. W. Xing, J. Bao, and Y. Y. Yang, “Numerical simulation of Hot Stamping of Quenchable Boron Steel”, Materials Science and Engineering, 499, pp.28-31, 2009. [24] M. Oldenburg, P. Akerstrom, G. Bergman and P. Salomonsson, “Microstructure Evolution and Mechanical Response in The Hot Stamping Process”, 6th European LS-DYNA Users’ Conference, pp.2135-2144, 2007. [25] A. Shapiro, “Finite Element Modeling of Hot Stamping”, Steel Research International, 80, pp.658-664, 2010. [26] A. Shapiro, “Using LS-Dyna for Hot Stamping”, 7th European LS-DYNA Users’ Conference, 2009. [27] L. Zhang, G. Zhao and H. Li, “Research on Stress-Strain Field and Fatigue Lifetime of The Hot Stamping Die”, Applied Mechanics and Materials, 34-35, pp.1630-1634, 2010. [28] E. Tekkaya, H. Karbasian, W. Homberg and M. Kleiner, “Thermo-Mechanical Coupled Simulation Of Hot Stamping components For Process Design”, Production Engineering, 1, pp.85-89, 2007. [29] Y. Gao, D. Gao, Y. Deng and W. Cao, “Hot Forming Analysis of Car Door Bar for Ultra High Strength Steel”, Advanced Materials Research, 160-162, pp.836-841, 2011. [30] H. S. Liu, J. Bao, Z. W. Xing, D. Zhang, B. Y. Song, and C. X Lei, “Modeling and FE Simulation of Quenchable High Strength Steels Sheet Metal Hot Forming Process”, Journal of Materials Engineering and Performance, 2010. [31] H.S. Liu, Z.W. Xing, J. Bao, and B.Y. Song, “Investigation of the Hot-Stamping Process for Advanced High-Strength Steel Sheet by Numerical Simulation”, Journal of Materials Engineering and Performance, 19, pp.325-334, 2010. [32] M. Merklein, J. Lechler, T. Stoehr, “Investigations on the Thermal Behavior of Ultra High Strength Boron Manganese Steels Within Hot Stamping”, International Journal of Material Forming, 2, pp.259-262, 2009. [33] A. Yanagida, T. Kurihara and A. Azushima, “Development of Tribo-Simulator For Hot Stamping”, Journal of Materials Processing Technology, 210, pp.456-460, 2010. [34] A. Yanagida and A. Azushima, “Evaluation of coefficients of friction in hot stamping by hot flat drawing test”, CIRP Annals-Manufacturing Technology, 58, 247-250, 2009. [35] M. Merklein, J. Lechler and M. Geiger, “Characterisation of the Flow Properties of the Quenchenable Ultra High Strength Steel 22MnB5”, CIRP Annals- Manufacturing Technology, 55, pp.229-232, 2006. [36] J. Min, J. Lin, J. Li and W. Bao, “Investigation on hot forming limits of high strength steel 22MnB5”, Computational Materials Science, 49, pp.326-332, 2010. [37] J. Tungtrongpairoj, V. Uthaisangsuk and W. Bleck, “Determination of Yield Behaviour of Boron Alloy Steel at High Temperature”, Journal of Metals, Materials and Minerals. 19, pp.29-38, 2009. [38] P. Salomonsson, M. Oldenburg, P. Akerstrom and G. Bergman, “Experimental and Numerical Evaluation of the Heat Transfer Coefficient in Press Hardening”, Steel Research International, 80, pp.841-845, 2009. [39] H. Yu, L. Bao1, Y. Deng and Wei Cao, “Influences of Variable Friction Coefficient on the Hot Formability of Ultra-High Strength Steel Sheet”, Advanced Materials Research, 154-155, pp.1450-1455, 2011. [40] P. Bosetti, S. Bruschi, T. Stoehr, J. Lechler and M. Merklein, “Interlaboratory Comparison for Heat Transfer Coefficient Identification in Hot Stamping of High Strength Steels”, International Journal of Material Forming, 3, pp.817-820, 2010. [41] L. Ying, Y. Chang, P. Hu, G. Shen, L. Liu and X. D. Li, “Influence of Low Tempering Temperature on Fracture Toughness of Ultra High Strength Boron Steel for Hot Forming”, Advanced Materials Research, 146-147, pp.160-165, 2011. [42] T. Senuma and Y. Takemoto, “Influence of Thermal History on Microstructure and Mechanical Properties of Steels for Hot Stamping”, Materials Science Forum, 654-656, pp.330-333, 2010. [43] H. Karbasian and A.E. Tekkaya, “A Review on Hot Stamping”, Journal of Materials Processing Technology, 210, pp.2103-2118, 2010. [44] D. W. Fan, H. S. Kim, and B. C. D. Cooman, “A Review of the Physical Metallurgy related to the Hot Press Forming of Advanced High Strength Steel”, Steel Research International, 80, pp.241-248, 2009. [45] F. P. Incropera and D. P. DeWitt, “Fundamentals of Heat and Mass Transfer”, 6th , 2007. [46] M. Naderi, L. Durrenberger, and Molinari W. Bleck, “Constitutive Relationships for 22MnB5 Boron Steel Deformed Isothermally at High Temperatures”, Materials Science and Engineering, 478, pp.130-139, 2008. [47] R. Kolleck, L. Aspacher and R. Veit, “Efficiency of hot formingprocesses”, Hot Sheet Metal Forming of High Performance Steel, 2, pp. 173, 2009. [48] http://www.aptgroup.com/ | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/27441 | - |
dc.description.abstract | 由於近年來環保意識之提升,汽車業為了降低油耗並提升行車安全性,全球各大車廠目前均致力於採用高強度鋼板以達減輕車體重量之目的,然高強度鋼板在沖壓成形過程中容易產生回彈、扭曲等難以預測之現象,導致生產時程較長。因此,熱沖壓成為近年新開發之製程,由組織之淬火相變,使板金產品之強度可達到1600MPa以上,且熱成形可解決回彈以及扭曲之問題,是未來汽車結構件重要之成形技術。
本研究針對熱沖壓製程之冷卻系統進行探討。首先蒐集目前文獻之材料性質參數,然後使用平板模具進行冷卻系統之設計,針對冷卻系統的幾何配置進行循環負載模擬,從中獲得不同設計下之模具穩態溫度,並探討不同設計對於板材之影響,將平板模具所歸納之結果應用於U型模具中,探討冷卻系統設計於U型模具之適用性,並藉由模擬U型成形之熱沖壓過程,探討成形過程中製程參數可能產生之冷卻問題。 本論文藉由平板循環負載模擬,獲得不同冷卻系統設計之穩態模具溫度,從中找尋使板材完全轉換為麻田散鐵之設計範圍,提供未來冷卻系統設計之參考依據;並藉由U型模具之成形模擬探討出壓料力、側壁接觸狀況、板材支撐銷,在成形過程中對板材冷卻影響性,其結果可提供未來模具設計之參考。 本論文使用有限元素軟體進行模擬,最後進行22MnB5板材之熱沖壓實驗,藉由比對實驗與模擬之板材厚度分佈、模具之溫度歷程、板材硬度以及金相結果與模擬結果進行比對,證明模擬結果之可信度。 | zh_TW |
dc.description.abstract | In order to save the fuel consumption and increase the automobile safety, the car makers take a lot of efforts to reduce the weight of an automobile. UHSS (ultra-high strength steel) is then widely used to increase the strength of car body structure, and reduce the car weight. In the application of UHSS, hot stamping is a new process developed in recent years. The strength of stamped part can reach 1600MPa through the phase transformation by quenching in the hot stamping process. Also the defects of distortion and spring-back can be reduced significantly by hot forming.
The properties of the products made by hot stamping are dominated by the cooling rate during the quenching process. Therefore the design of cooling system is crucial in this process. In order to find the steady temperature under different cooling designs, the finite element simulations were performed with the use of the DEFOEM software to study the cooling system design in a cyclic production condition. The cooling system employed in a flat-shaped tooling was examined first and the optimum design parameters were then applied to a U-shape model. With a proper set of cooling system design parameters provided, the effects of blank holder force and contact condition at side wall on the cooling condition in a U-shape die were then investigated in this study by the finite element simulations. In order to validate the efficiency and the accuracy of the finite element analysis, both flat-shaped and U-shaped tools were designed and manufactured to conduct the actual hot stamping processes with the use of 22MnB5 sheets. The microstructure and mechanical properties of the hot stamped parts were examined by the metallographic analysis and micro-hardness. The experimental data agree well with those obtained from the finite element simulations. The research results obtained in the present study could provide as a reference for the cooling system design of a hot stamping die. | en |
dc.description.provenance | Made available in DSpace on 2021-06-12T18:05:06Z (GMT). No. of bitstreams: 1 ntu-100-R98522524-1.pdf: 9987334 bytes, checksum: e09f59419de9fcad6ba98cbb5b1ffd5a (MD5) Previous issue date: 2011 | en |
dc.description.tableofcontents | 摘要 1
第一章 緒論 1 1.1 前言 1 1.2 熱沖壓製程簡介 4 1.3 研究動機與目的 5 1.4 文獻回顧 7 1.5 研究方法與步驟 17 1.6 論文總覽 19 第二章 熱沖壓材料及介面參數蒐集 21 2.1 熱沖壓用板材材料應力應變性質曲線 21 2.2 22MnB5鋼板熱性質 25 2.3 22MnB5鋼板介面性質 26 2.4 摩擦係數 29 第三章 平板冷卻系統設計與熱傳分析 31 3.1 模擬軟體特性之分析與選用 31 3.1.1 ABAQUS 31 3.1.2 LS-DYNA 32 3.1.3 PAM-STAMP 32 3.1.4 DEFORM 33 3.1.5 模擬分析軟體之選用 33 3.2 模擬模型之建立 34 3.2.1 DEFORM 3D 熱、機參數之建立 34 3.2.2 循環負載模擬分析模型 38 3.3 平板模具冷卻系統設計之探討 41 3.3.1 平板冷卻系統模擬模型之建立 41 3.3.2 冷卻管與模面間距設計之探討 42 3.3.3 冷卻管之管緣間距設計之探討 47 3.3.4 結果與討論 54 第四章 U型模具冷卻系統設計與熱傳及受力分析 57 4.1 U型模具熱傳分析 57 4.1.1模擬模型之建立 57 4.1.2 結果與討論 59 4.2 U型模具之受力分析 64 第五章 U型模具熱沖壓製程參數研究 68 5.1 板材放置狀況影響之探討 69 5.2 壓料狀況之影響探討 72 5.3 側壁間距影響之探討 73 第六章 有限元素模擬分析之實驗驗證 78 6.1 U型模具熱沖壓實驗 78 6.2 有限元素模擬分析之驗證 81 6.2.1 實驗模具之熱沖壓模擬 81 6.2.2 模具溫度歷程之驗證 83 6.2.3 厚度之驗證 85 6.2.4 金相與硬度之驗證 86 第七章 結論 91 參考文獻 93 | |
dc.language.iso | zh-TW | |
dc.title | 熱沖壓成形之冷卻系統設計與製程參數研究 | zh_TW |
dc.title | The cooling system design and the process parameters study for hot stamping | en |
dc.type | Thesis | |
dc.date.schoolyear | 99-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 黃佑民,洪景華,黃庭彬 | |
dc.subject.keyword | 熱沖壓成形,模具冷卻系統,22MnB5板材,平板模具,U型模具,製程參數,有限元素模擬分析,實驗驗證, | zh_TW |
dc.subject.keyword | hot stamping,die cooling system,22MnB5 sheet,flat-shaped dies,U-shaped dies,process parameter,finite element analysis,experimental validation, | en |
dc.relation.page | 98 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2011-08-09 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-100-1.pdf 目前未授權公開取用 | 9.75 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。