請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/27163
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 張正憲(Jeng-Shian Chang) | |
dc.contributor.author | Chia-Hsiang Lin | en |
dc.contributor.author | 林家祥 | zh_TW |
dc.date.accessioned | 2021-06-12T17:56:51Z | - |
dc.date.available | 2016-08-17 | |
dc.date.copyright | 2011-08-17 | |
dc.date.issued | 2011 | |
dc.date.submitted | 2011-08-09 | |
dc.identifier.citation | 1. Amirouche, F., Zhou, Y. and Johnson, T., 'Current micropump technologies and their biomedical applications,' Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems,2009. 15(5): p. 647-666
2. Iverson, B.D. and Garimella, S.V., 'Recent advances in microscale pumping technologies: a review and evaluation,' Microfluidics and Nanofluidics, 2008. 5(2): p. 145-174. 3. Nisar, A., et al., 'MEMS-based micropumps in drug delivery and biomedical applications,' Sensors and Actuators B-Chemical, 2008. 130(2): p. 917-942. 4. Tsai, N.C. and Sue, C.Y., 'Review of MEMS-based drug delivery and dosing systems,' Sensors and Actuators a-Physical, 2007. 134(2): p. 555-564. 5. Zhang, C.S., Xing, D., and Li Y.Y., 'Micropumps, microvalves, and micromixers within PCR microfluidic chips: Advances and trends,' Biotechnology Advances, 2007. 25(5): p. 483-514. 6. Gretillat, M.A., Gretillat, F., and N.F. de Rooij, 'Micromechanical relay with electrostatic actuation and metallic contacts,' Journal of Micromechanics and Microengineering, 1999. 9(4): p. 324-331. 7. Machauf, A., Nemirovsky, Y., and Dinnar, U., 'A membrane micropump electrostatically actuated across the working fluid,' Journal of Micromechanics and Microengineering, 2005. 15(12): p. 2309-2316. 8. Olsson, A., Stemme, G., and Stemme, E., 'A valve-less planar fluid pump with two pump chambers,' Sensors and Actuators a-Physical, 1995. 47(1-3): p. 549-556. 9. Stemme, E. and Stemme, G., 'A valveless diffuser/nozzle-based fluid pump,' Sensors and Actuators a-Physical, 1993. 39(2): p. 159-167. 10. Lee, S. and Kim, K.J., 'Design of IPMC actuator-driven valve-less micropump and its flow rate estimation at low Reynolds numbers,' Smart Materials & Structures, 2006. 15(4): p. 1103-1109. 11. Linnemann, R., et al. 'A self-priming and bubble-tolerant piezoelectric silicon micropump for liquids and gases,' 1998. 12. Pan, T.R., et al., 'A magnetically driven PDMS micropump with ball check-valves,' Journal of Micromechanics and Microengineering, 2005. 15(5): p. 1021-1026. 13. Hsu, C.J. and Sheen, H.J., 'A microfluidic flow-converter based on a double-chamber planar micropump,' Microfluidics and Nanofluidics, 2009. 6(5): p. 669-678. 14. Olsson, A., et al., 'Micromachined flat-walled valveless diffuser pumps,' Journal of Microelectromechanical Systems, 1997. 6(2): p. 161-166. 15. 李俊賢, '可攜式無閥壓電微幫浦之設計製作與應用,' 國立台灣大學應用力學研究所碩士論文, 2003. 16. 謝明哲, '無閥式微幫浦之腔體設計與作動機制研究,' 國立台灣大學應用力學研究所碩士論文, 2009. 17. 蔡文惠, '進出口設計對無閥式微幫浦效能影響之實驗探討,' 國立台灣大學應用力學研究所碩士論文, 2010. 18. Morris, C.J. and Forster, F.K., 'Low-order modeling of resonance for fixed-valve micropumps based on first principles,' Journal of Microelectromechanical Systems, 2003. 12(3): p. 325-334. 19. Gamboa, A.R., Morris, C.J., and Forster, F.K., 'Improvements in fixed-valve micropump performance through shape optimization of valves,' Journal of Fluids Engineering-Transactions of the ASME, 2005. 127(2): p. 339-346. 20. Teng Yong Ng, D.X., Khin Yong Lam., United state patent (Patent No.: US 6910869), Institute of High Performance Computing, Singapore. 2005. 21. Izzo, I., et al., 'Modeling and experimental validation of a piezoelectric micropump with novel no-moving-part valves,' Sensors and Actuators a-Physical, 2007. 133(1): p. 128-140. 22. Lee, C.J., et al., 'A study of PZT valveless micropump with asymmetric obstacles,' Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems, 2009. 15(7): p. 993-1000. 23. Bringley, T.T., et al., 'An experimental investigation and a simple model of a valveless pump,' Physics of Fluids, 2008. 20(3). 24. Forouhar, A.S., et al., 'The embryonic vertebrate heart tube is a dynamic suction pump,' Science, 2006. 312(5774): p. 751-753. 25. Yoon, J.S., et al., 'A valveless micropump for bidirectional applications,' Sensors and Actuators a-Physical, 2006. 135(2): p. 833-838. 26. Olsson, A., Stemme, G., and Stemme, E., 'Numerical and experimental studies of flat-walled diffuser elements for valve-less micropumps,' Sensors and Actuators, 2000. Vol.84: p. 165-175. 27. Fan, B., Song, G., and Hussain, F., 'Simulation of a piezoelectrically actuated valveless micropump,' Smart Materials & Structures, 2005. Vol.14: p. 400-405. 28. Pan, L.S., Ng, T.Y., Wu, X.H., and Lee, H.P., 'Analysis of valveless micropumps with inertial effects,' Journal of Micromechanics and Microengineering, 2003. Vol.13: p. 390-399. 29. Olsson, A., Stemme, G., and Stemme, E., 'A numerical design study of the valveless diffuser pump using a lumped-mass model,' Journal of Micromechanics and Microengineering, 1999. 9(1): p.34-44. 30. Ullmann, A., 'The piezoelectric valve-less pump-performance enhancement analysis,' Sensors and Actuators a-Physical, 1998. 69(1): p.97-105. 31. Yang, K.S., Chen, I.Y., and Wang, C.C., 'Performance of nozzle/diffuser micro-pumps subject to parallel and series combinations,' Chemical Engineering & Technology, 2006. 29(6): p. 703-710. 32. ANSYS CFX 12.1 User Manuals. 33. CFDRC V2004 User Manuals. 34. Ha Dong-Ho, et al., 'Three-dimensional electro-fluid-structural interaction simulation for pumping performance evaluation of a valveless micropump,' Smart Materials & Structures, 2009. 18(4): p. 15-22. 35. Documentation for ANSYS 12.1: Coupled Field Analysis Guide. 36. Nguyen, T.T. and Goo, N.S., 'A Novel PDMS valveless micropump with a circular lightweight piezo-composite actuator,' Key Engineering Materials, 2006. 321-323: p. 245-248. 37. Ma, H.K., et al., 'Development of an OAPCP-micropump liquid cooling system in a laptop,' International Communications in Heat and Mass Transfer, 2009. 36(3): p. 225-232. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/27163 | - |
dc.description.abstract | 本文利用商業軟體ANSYS作為數值模擬的工具,對噴嘴/擴散器式的壓電無閥式微幫浦作流量分析,藉由改變進出口的幾何尺寸,以及緩衝腔體的串聯,探討流阻變化對微幫浦性能的影響。除了比對實驗的流量之外,同時將模擬計算出的流場與實驗上的流場顯影作比較與討論,以對微幫浦內流場變化對於流量的影響有更清楚的瞭解。
與一般常用的模擬微幫浦之方法不同,本文的模型沒有經過簡化,而是考慮壓電材料與微幫浦之間的電、流、固多重耦合分析。本文處理流固耦合所使用的模擬計算方法也有別於一般CFD軟體的移動邊界(moving boundary),而是透過ANSYS與ANSYS CFX將結構場與流場結合的同步雙向耦合,比起一般的移動邊界法,本文所得到的流場更為擬真。 由數值計算結果可以發現,將進出口尺寸(R)增大為振動腔半徑(Rch)的1.2倍,流量會大幅提升。儘管模擬的流量數值誤差稍大,流量變化的趨勢仍然和實驗大致相符。另外,模擬結果也可看出在微幫浦振動腔前後加入緩衝腔體對流量的提升亦有明顯的改善,尤其在振動腔體前後各置一緩衝腔體的效果最好,此趨勢亦和實驗結果相符。 在實驗上發現當進出口渦漩對和腔體之出口端渦漩對最大時,幫浦的效率最好,而模擬的流場發展趨勢也和實驗結果大致相符。由模擬和實驗的結果,可以證實不管是改變進出口尺寸或是增加緩衝腔體,都能夠減小流阻與提供微幫浦腔體內之渦漩對有更好的發展空間,以提升微幫浦的性能。 | zh_TW |
dc.description.abstract | This paper use the ANSYS software to do numerical analysis of flow rate for the valveless nozzle/diffuser-based micropump. By varying the geometrical design of the inlet and outlet, and serially connecting one to several buffer chambers to the micropump in order to discuss its influence on the flow resistance and the pumping efficiency. Besides flow rate, by comparing the simulation flow field with experimental results in order to have more detailed explanation of the flow mechanism.
Unlike the commonly used method of simulated micropump, the pumping performances of a piezoelectric valveless micropump are investivated in terms of the three-dimensional electro-fluid-structural interaction. General CFD software processing fluid-structure interaction using moving boundary method. However, this paper using two-way direct FSI. ANSYS and ANSYS CFX are used for the structural and fluid domains, respectively. Both the structural and fluid domains are coupled in the three-dimensional simulation. The flow field calculated by synchronous two-way coupling is closer to reality than the moving boundary. The numerical results showed that the flow rate increased substantially when radius for the inlet and outlet was 1.2 times of the chamber. Despite the numerical results are not accurate enough, the trends of simulation roughly match the experimental results. In addition, numerical results also showed the design of buffers can really enhance the performance of micropump, especially the design of each buffer serially connecting on the both sides of the chamber is optimal. These simulations are also consistent with the experimental results. The flow visualization analysis shows that the best pumping efficiency happened as the vortex pairs of inlet and outlet region and the vortex pair in the vibrating chamber near the outlet diffuser reached maximum. The flow field of simulation also presents similar trends. Consequently, “varying the size of inlet and outlet” and “buffers serially connecting to a vibrating chamber” both could decrease the flow resistance and provided enough space to make the vortex inside chamber develop well. Hence, the micropump performance is obviously enhanced. | en |
dc.description.provenance | Made available in DSpace on 2021-06-12T17:56:51Z (GMT). No. of bitstreams: 1 ntu-100-R98543020-1.pdf: 32936293 bytes, checksum: 2b3abdac35062f3e5b0ebc071ad2fb51 (MD5) Previous issue date: 2011 | en |
dc.description.tableofcontents | 摘要 i
ABSTRACT iv 目錄 vi 圖目錄 viii 表目錄 xi 第一章 導論 1 1.1前言 1 1.2 文獻回顧 2 1.2.1 驅動方式簡介 2 1.2.2 微閥門簡介 3 1.2.3 無閥式微幫浦回顧 4 1.3 研究動機 7 第二章 理論基礎 8 2.1 無閥式微幫浦基本工作原理 8 2.2 噴嘴/擴散器理論分析 9 2.3 壓電、結構、流體的互相耦合關係 12 2.3.1 壓電與結構的耦合 12 2.3.2 流場與結構的耦合 14 第三章 數值方法與模擬設定 16 3.1 數值方法 16 3.1.1 有限體積法 16 3.1.2 有限差分法 18 3.1.3 收斂標準 19 3.2 模擬設定 19 3.2.1 軟體簡介 19 3.2.2 模擬模型之設定 20 第四章 模擬結果與討論 23 4.1 基本模型─單腔式微幫浦之模擬 23 4.1.1 壓電片位移的模擬 24 4.1.2 Model 1流量計算結果 24 4.1.3 Model 1流場結果比較 25 4.2 改變進出口尺寸之模擬 27 4.2.1 Model 2流量計算結果 28 4.2.2 Model 2流場結果比較 28 4.2.3 誤差討論 30 4.3 多腔體串聯模擬 30 4.3.1 Model 3流量計算結果 31 4.3.2 Model 3流場結果比較 31 4.3.3 Model 4流量計算結果 32 4.3.4 Model 4流場結果比較 32 第五章 結論與未來展望 34 5.1 結論 34 5.2 未來展望 35 參考文獻 86 | |
dc.language.iso | zh-TW | |
dc.title | 進出口設計對無閥式微幫浦效能影響之數值模擬 | zh_TW |
dc.title | Numerical Simulation on the design of Inlet and Outlet
in the Valveless Micropump | en |
dc.type | Thesis | |
dc.date.schoolyear | 99-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 吳光鐘,王安邦 | |
dc.subject.keyword | 壓電無閥式微幫浦,流固耦合數值模擬,進出口尺寸,緩衝腔體, | zh_TW |
dc.subject.keyword | PZT valveless micropump,FSI numerical simulation,size of inlet and outlet,buffers, | en |
dc.relation.page | 90 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2011-08-09 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 應用力學研究所 | zh_TW |
顯示於系所單位: | 應用力學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-100-1.pdf 目前未授權公開取用 | 32.16 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。