請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/26775
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 葉仲基 | |
dc.contributor.author | Sheng-Feng Huang | en |
dc.contributor.author | 黃聖峰 | zh_TW |
dc.date.accessioned | 2021-06-08T07:25:04Z | - |
dc.date.copyright | 2008-07-30 | |
dc.date.issued | 2008 | |
dc.date.submitted | 2008-07-16 | |
dc.identifier.citation | 王明茂、謝俊夫。1999。蕹菜收穫機之研究開發。農業機械學刊8(4):29-38。
王明茂。2001。馬拉巴栗植體去葉機之研究。高雄區農業改良場研究彙報。12(1):26-37。 江崎春雄。1951。刈取機の設計要素に関する実験的並びに理論的研究。關東東山農業試驗埸研究報告。第12號。 陳勝生。1981。改良式水稻聯合收穫機收割機構切割特性之研究。碩士論文。台北:台灣大學農業工程學研究所。 陳加忠、陸龍虎。1983。水稻聯合收穫機收割機構應用於高梁收穫之切割特性研究。農業工程學報。29(3):58-67。 馮丁樹、范乾裕。1991。青割狼尾草收穫機割取與切削動力之研究。農業工程學報。37(3):67-79。 連振昌。2004。狼尾草草莖剪切力量及剪切衝量之研究。農業機械學刊。13(2):39-50。 黃清旺。1987。狼尾草青割收穫機之研究。農業工程學報33 (4):62-81。 黃清旺。1989。狼尾草青割收穫機作業扭力特性初步試驗。農業工程學報35(2):37-58。 張淑華、蔡錦瑩、許原瑞、何政坤。2005。喜樹之微體繁殖與喜樹鹼含量分析。台灣林業科學20(4):331-40。 張淑華。2006。利用喜樹組織培養生產喜樹鹼。林業研究專訊13(4):10-13。 張福祥、盧福明。1992。芋頭收穫機之研究。農業機械學刊1(1):50-59。 張森富、魏炳華。1987。甘蘭收穫機之關念與功能設計。農業工程學報33(3):42-50,28。 鍾侑達、張森富。1991。甘藍收穫機之設計。農工學報37(3):80-88。 鍾侑達、張明毅、張森富。1991。甘藍收穫機二次切割機構之設計與試驗。農業工程學報37(1):110-115。 關昌揚譯。1997。農業機械學。徐氏基金會出版。台北。 關昌揚譯。1982。科學圖書大庫農業機械操作叢書(三)收穫機械。徐氏基金會 出版。台北。 Andrew J. Asher. 1952. Mathematical analysis of the offset slider-crank mechanism. Agricultural Engineering p27. Brown D. and J. L. Glancey. 2007. Theoretical and experimental analysis of a continuous-blade cutting system for leafy vegetables. Transactions of the ASABE 50(3):803-813. Chattopadhyay, P. S.and K.P. Pandey. 1999.Mechanical properties of sorghum stalk in relation to quasi-static deformation. J. Agri. Engng Res. 73:199-206. Coates, W. 1999. Evaluation of cutting devices for hesperaloe haresting. Applied Engineering in Agriculture 15(3):183-187. Guarnieri A., C. Maglioni and G. Molari. 2007. Dynamic analysis of reciprocating single-blade cutter bars. Transactions of the ASABE 50(3): 755−764. Kiroku Kuno and Fujio Nakano. Hiroshi Takiya and Katsuhiro Suzuki. 1975. Studies on the mechanization of the tea leaf plucking. 茶業試驗場研究報告 第11號. Kepener, Robert A. 1952. Analysis of the cutting action of a mower. Agricultural Engineering 33:693-697,704. Persson, S. 1987. Mechanical of cutting material. St. Joseph, Mich., USA : American Society of Agricultural Engineers. Wall, M.E., M.C. Wani, C.E. Cook. and K.H. Palmer 1966. Plant antitumor agents. I.The isola¬tion and structure of camptothecin-a novel alkaloidal leukemia and tumor inhibitor from Camptotheca acuminata. J. Am. Chem. Soc. 88:3888-90. Chen,Ying, J. L. Gratton and J. Liu. 2004. Power requirements of hemp cutting and conditioning. Biosystems Engineering 87(4): 417-424. Yan, Xiu-Feng, Yang Wang, Tao Yu, Yu-Hong Zhang and Shao-Jun Dai. 2003. Variation in camptothecin content in Camptotheca acuminate leaves. Botanical Bulletin of Academia Sinica 44:99-105. Zion, B. A., L. Weisblum, R. Regev, Reshef, M. Cohen, Y. Steinmetz and M. Lev. 2007. Mechanical harvesting of Leucadendron flowers. Applied Engineering in Agriculture 23(4):425-431. 網路資料 KYOWA公司。2008。KYOWA手冊。日本。 網址:http://www.kyowa-ei.co.jp/english/products/gages/pdf/kfg-04.pdf。上網日期:2008-1-10。 Michigan Scientific公司。2008。Michigan Scientific手冊。美國。 網址:http://www.luchsinger.it/pdf/MichiganS_Series.pdf。上網日期。2008-2-12。 | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/26775 | - |
dc.description.abstract | 喜樹之嫩葉富含喜樹鹼,此為抗癌藥物的原料之一,所以對其需求量會愈來愈多,然而現今種植樹的農民並沒有一台合適的收割機械能大量且快速的採收其葉片,本研究目的為參考現今的採收機械構造,設計出合適採收喜樹枝葉之切割機構並利用繪圖軟體設計喜樹枝葉採收機之雛型。
經過調查現今農業上最常使用之切割機構,本文決定以往復切割機構做為主要測試切割機構,同時利用市面最常見的聯合收穫機用割刀組和採茶機用切割機構來進行測試;前者刀具為水平型式,刀片為鋸斷狀,後者之刀具為一弧型式,刀片為光滑狀。 為了準確地了解實際切割情形,本實驗於室內利用整組切割機構來切割多束喜樹,一開始以二種不同的台車前進速度(0.52 m/s和0.63 m/s)和二種割刀速度(聯合收穫機割刀轉速為230 rpm和330rpm,採茶機收穫機割刀轉速為750 rpm和850 rpm)進行測試,實驗中紀錄切割時扭力的變化及切割後之撕裂率以判斷切割性能之好壞。 切割實驗結果以聯合收穫機切割機構在二種割刀轉速和台車速度下之切割撕裂率在5%以下,優於採茶機切割機構只有在台車速度0.52 m/s下切割撕裂率在5%以下;接著增加二組聯合收穫機割刀轉速200 rpm和420 rpm和一台車速度0.84 m/s加以測試,總合切割結果發現聯合收穫機割刀轉速330 rpm和420 rpm在三種台車速度下皆有好的切割性,而割刀轉速200 rpm和230 rpm只有在台車速度1~2 km/hr下有好的切割性。 切割扭力實驗結果顯示,聯合收穫機最大切割空轉扭力和割刀迴轉速有線性關係;而切割扭力與切割動力和切割速度比(k值)有指數函數關係,切割所需扭力與動力隨k值增加而增加。 最後本研究認為聯合收穫機用割刀機構比採茶機用割刀機構合適於喜樹枝葉採收上。 | zh_TW |
dc.description.abstract | The highest level of camptothecin is found in the leaves of camptotheca (happy tree). This is a potent anti-cancer material, and in trying to harvest the leaves, farmers have so far lacked a suitable machine to pluck happy tree’s baby leaves effectively. The purpose of this study was to find the best device for plucking leaves from happy trees, and then use software to design a prototype of the leaf-plucking machine.
In this study, the reciprocating knife mechanism was chosen. Two types of reciprocating cutting devices were used. One is a reciprocating cutterbar from a rice combine. It has a horizontal pattern and a serrated blade. The other is a cutterbar from a tea plucking machine that has an arc pattern and a smooth blade. In order for the cutting simulation to be realistic, this experiment tested the whole cutting mechanism at two different forward speeds (0.52 m/s and 0.63 m/s) and various knife velocities (0.38 m/s and 0.55 m/s for the reciprocating cutterbar from a rice combine, 0.88 m/s and 0.99 m/s for the cutterbar from a tea plucking machine) and recorded the torque and ratio of broken branches to determine which one is the best cutting mechanism. The result showed the ratio of broken branches for the reciprocating cutterbar from a rice combine at two different forward speeds and knife velocities is less than 5%. At 0.52 m/s forward speed for the reciprocating cutterbar, the ratio of broken branches for the tea plucking machine was less than 5%. Two additional knife velocities (0.33 m/s and 0.70 m/s) and one additional forward speed (0.84 m/s) for the reciprocating cutterbar from a rice combine were tested. The results showed that the knife velocities of the reciprocating cutterbar from a rice combine at 0.55 m/s and 0.70 m/s on the three above mentioned forward speeds had an excellent cutting property. But the knife velocities of the reciprocating cutterbar from a rice combine at 0.33 m/s and 0.38 m/s only on the forward speeds 0.52 m/s had an excellent cutting property. Another result showed that the max net torque requirement of the reciprocating cutterbar from a rice combine during the cutting operation had a linear relation with the knife velocities. Torque and power requirements during the cutting operation had an exponential relation with the ratio of velocity. If the velocity ratio increased, the torque and power requirement also increased. The conclusion from this study is that the reciprocating cutterbar from a rice combine is better for plucking happy trees’s leaves. | en |
dc.description.provenance | Made available in DSpace on 2021-06-08T07:25:04Z (GMT). No. of bitstreams: 1 ntu-97-R95631002-1.pdf: 1534450 bytes, checksum: 7d11cc89543f5f4f23a1cd32addff8b3 (MD5) Previous issue date: 2008 | en |
dc.description.tableofcontents | 目錄
頁次 口試委員審定書 致謝 i 摘要 ii Abstract iii 目錄 圖目錄 vii 表目錄 ix 第一章 前言 1 第二章 研究目的 3 第三章 文獻探討 4 3-1 切割機構 4 3-2 機械性質 7 3-3 往復刀具運動方式 12 3-4 應變規原理 17 3-5 含水率 19 第四章 實驗材料與方法 20 4-1 實驗裝置 20 4-2 實驗儀器 24 4-3 實驗材料 29 4-4 實驗方法 29 第五章 結果與討論 35 5-1 量取軸校正結果 35 5-2 切割撕裂率 37 5-3 切割扭力 40 5-4 喜樹枝葉採收機雛型設計 49 第六章 結論與建議 51 參考文獻 53 附錄 56 圖目錄 頁次 圖3-1 三種圓盤刀片 5 圖3-2 衝擊式剪切裝置 8 圖3-3 剪切裝置 9 圖3-4 田間測試裝置 10 圖3-5 往復刀具運動分析 12 圖3-6 往復刀片動刀刃速度解析 16 圖3-7 惠斯登電橋電路 18 圖4-1 實驗裝置 20 圖4-2 雙人式採茶機 21 圖4-3水稻聯合收穫機用之切割機構 21 圖4-4 割刀動力組 22 圖4-5 台車實體 23 圖4-6 轉速計 24 圖4-7 應變規(KYOWA) 25 圖4-8 滑環實體 26 圖4-9 滑環規格 26 圖4-10 滑環座示意 27 圖4-11 KYOWA放大器 28 圖4-12 研華A/D信號蒐集器 29 圖4-13 測含水率設備 30 圖4-14 校正裝置 32 圖4-15 撕裂之喜樹莖 33 圖5-1 扭力-應變之關係 36 圖5-2 各種割刀轉速和台車速度之切割撕裂關係 39 圖5-3 聯合收穫機切割機構空轉轉速與扭力關係 41 圖5-4 聯合收穫機切割機構在230 rpm下之空轉扭力 42 圖5-5 聯合收穫機切割機構在330 rpm下之空轉扭力 42 圖5-6 採茶機切割機構之原始訊號 43 圖5-7 採茶機切割機構之平均後訊號 43 圖5-8 聯合收穫機切割機構之k值與扭力關係 46 圖5-9 聯合收穫機切割機構割刀轉速與扭力之關係 47 圖5-10 動力與k值之關係 48 圖5-11 喜樹枝葉採收機之前視 49 圖5-12 喜樹枝葉採收機之側視 50 圖5-13 喜樹枝葉採收機之等角視 50 表目錄 頁次 表4-1 轉速計規格 24 表4-2 應變規規格(KYOWA) 25 表4-3 滑環規格 27 表5-1 量取軸校正 35 表5-2 切割撕裂率 37 表5-3 切割撕裂率 38 表5-4 採茶機切割機構最大空轉扭力值 40 表5-5 聯合收穫機切割機構最大空轉扭力值 40 表5-6 採茶機切割機構在不同轉速和台車前進速度之切割扭力 44 表5-7 聯合收穫機切割機構在不同轉速和台車前進速度之切割扭力 44 表5-8 採茶機切割機構ANOVA分析 45 表5-9 聯合收穫機切割機構ANOVA分析 45 表5-10 切割動力 47 | |
dc.language.iso | zh-TW | |
dc.title | 喜樹枝葉採收機構之基礎研究 | zh_TW |
dc.title | A basic study of branch cutting mechanisms for happy trees | en |
dc.type | Thesis | |
dc.date.schoolyear | 96-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 張森富,吳剛智 | |
dc.subject.keyword | 切割機構,切割扭力,撕裂率,切割速度比, | zh_TW |
dc.subject.keyword | cutting device,Torque,ratio of broken branches,ratio of velocity, | en |
dc.relation.page | 55 | |
dc.rights.note | 未授權 | |
dc.date.accepted | 2008-07-17 | |
dc.contributor.author-college | 生物資源暨農學院 | zh_TW |
dc.contributor.author-dept | 生物產業機電工程學研究所 | zh_TW |
顯示於系所單位: | 生物機電工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-97-1.pdf 目前未授權公開取用 | 1.5 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。