請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/26463
標題: | 石英音叉振盪器研製 Study on the Fabrication of Tuning Fork Quartz Resonator |
作者: | Jing-Hao Weng 翁璟豪 |
指導教授: | 張家歐(Chia-Ou Chang) |
關鍵字: | 低溫石英,蝕刻速率,石英振盪器, α-quartz,etch rates,quartz oscillator, |
出版年 : | 2011 |
學位: | 碩士 |
摘要: | 本文所探討的是以微機電製程在 低溫石英晶圓(α-Quartz)製作石英振盪器,並設計出第一彎曲模態之自然頻率為35kHz之石英振盪器與製程規劃。利用雙面蝕刻實驗測試石英振盪器之雙樑在蝕刻後的斷面圖形,取得其最佳蝕刻斷面以及蝕刻時間,並且計算出蝕刻速率。使用實驗所取得之蝕刻速率與蝕刻時間,設計石英振盪器的相關尺寸,與設計石英振盪器製程上所需光罩尺寸,接著利用微機電製程技術完成石英振盪器本體。 The purpose of this thesis is to study α-quartz by using MEMS process technology to finish the quartz oscillator under the nature frequency of the first flexible mode at 35kHz. We can get the best etch times and etch cross-section by the two-face etch experiment of quartz oscillator. Finally using the parameters of etch rates and etch times from the experiments we can design the process or size of quartz oscillator and the size of mask. And then use MEMS process technology to finish the quartz oscillator. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/26463 |
全文授權: | 未授權 |
顯示於系所單位: | 應用力學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-100-1.pdf 目前未授權公開取用 | 5.5 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。