請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/25970
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 楊哲人 | |
dc.contributor.author | Yu Chen | en |
dc.contributor.author | 陳佑 | zh_TW |
dc.date.accessioned | 2021-06-08T06:57:47Z | - |
dc.date.copyright | 2009-07-16 | |
dc.date.issued | 2009 | |
dc.date.submitted | 2009-07-14 | |
dc.identifier.citation | 1. 姜志華、蔡金峰, '焊接冶金概論' 徐氏基金會出版 (1987), p.16.
2. M.F.Ashby and K. E. Easterling, Acta Metall 30 (1982), p.1969. 3. H. I. Aaronson, C. Laird and K. R. Kinsman, Phase transformation, ASM, Metal Park, Ohio (1970), p.313. 4. M. Nakanishi and Y. Komizo, Metal Construction Sep (1982), p.472. 5. K. Homeycombe, Steels microstructure and properties, (1980). 6. S.S.Babu and H. K. D. H. Bhadeshia, Mater. Sci. Technol. Vol.6 (1990), 1005. 7. I. Loginova, J. Agren and G. Amberg, Acta Materialia Vol.52 (2004), p.4055-4063. 8. M. Nwatson, P. L. Harrison and R. A. Farrar, Welding and Metal Construction (1981), p.101. 9. R. Sandstorm and A. Sandberg, Metals Technology Oct (1980), p.398. 10. H. K. D. H. Bhadeshia, Acta Metall Vol.29 (1981), p.1117. 11. E.Levine and D. C. Hill, Metallurgical Transactions A Vol 8A (1977), p.1453-1463. 12. R. A. Ricks, P. R. Howell and G. S. Barritte, The nature of acicular ferrite in hsla steel weld metals, J. Mater. Sci. 17 (1982), no. 3, 732-740. 13. H. K. D. H. Bhadeshia, Banite in steel, p.238-p.243. 14. S. Kanazawa, Nakajima, A., Okamoto, K., Kanaya, K., Tetsu-to-Hagan 15. S. Ohkita, Wakabayashi, M., Homma, H., Yamamoto, K., Matsuda, S.:, Seitetsu Kenkyu. (327), (1987), p9-14. 16. K. Yamamoto, Matsuda, S., Haze, T., Chijiiwa, R., Mimura, H., ASTM STP 1042. ( 1989), p.266-284. 17. Y. Ohno, Y. Okamura, S. Matsuda, K. Yamamoto and T. Mukai, Characteristics of haz microstructure in ti-b treated steel for large heat input welding, Tetsu To Hagane-J. Iron Steel Inst. Jpn. 73 (1987), no. 8, 1010-1017. 18. Y. Tomita, Saito, N., Tsuzuki, T., Tokunaga, Y., Okamoto, K., ISIJ Int. 34 (1994), p.829-835. 19. 黃慶淵、楊哲人, ”含鈮鋼板銲接熱模擬顯微組織研究”,台大材料所與中國鋼鐵公司建教合作案, p.11. 20. S. Shinichi, I. Katsuyuki and A. Toshikazu, High tensile strength steel plates with excellent haz toughness for shipbuilding-jfe ewel technology for excellent quality in haz of high heat input welded joints, JEF TECHNICAL REPORT NO.5 (2005). 21. T. Kimurq, M. Hisada, S. Fuzisawa, Y. Yokoyama and S. Katori, Steel plates for architectural construction with excellent toughness in large heat input welded joints, 川崎製鐵技報 34 (2002), p158-163. 22. S. Kanazawa, A. Nakashima, K. Okamoto and K. Kanaya, Improved toughness of weld fussion zone by fine tin particles and development of a steel for large heat input welding, (1974). 23. M. a. F. Y.-i. KOMIZO, Microstructure and precipitation behavior in heat affected zone of c-mnmicroalloyed steel containing nb, v and ti, ISIJ International, Vol. 35 (1995), pp. 1196-1191 1202. 24. K. Akihiko. and H. Tomohiko., Development of high haz toughness steel plates for box columns with high heat input welding, Nippon Steel Technical Report,No. 90 (Jul. 2004), p.39. 25. X. Q. Wang, H. Iwaki, M. Murakami, X. L. Du, Y. Ishitani and A. Yoshikawa, Molecular beam epitaxy growth of single-domain and high-quality zno layers on nitrided (0001) sapphire surface, Jpn. J. Appl. Phys. Part 2 - Lett. 42 (2003), no. 2A, L99-L101. 26. “Kobelco Welding Today” Kobelco Steel Vol.9(No.2) (2006 Jun ). 27. R. K. Ham and N. G. Sharpe, Philosophical Magazine Vol.6 p.1193 - 1194. 28. C. S. Smith and L. Guttman, Trans. Amer. Inst. Mining, Met. Petrol. Eng. Vol.197 (1953), p.81. 29. J. E. Bailey and P. B. Hirsch, Philosophical Magazine Vol.5 p.485 - 497. 30. R. K. Ham, The determination of dislocation density in thin foils, Phil. Mag. Vol. 6 (1961), p.1183-1184. 31. P. Hirsch, Howie, A., Nicholson, R. B., Phashley, D. W., and Whelan, M. J, , Electron Microscopy of Thin Crystals. Published by Krieger, New York, N.Y. (1977), p.416-425. 32. J. W. Edington, Practical Electron Microscopy in Materials Science. MacMillan, London (1975), p.119. 33. J. R. Yang and H. K. D. H. Bhadeshia, WELDING RESEARCH SUPPLEMENT,, p.305-307. 34. M. R. STAKER and D. L. HOLT, Acta Metallurgica Vol. 20 (1972,), p.569-579. 35. A. S. Keh and S. Weissmann, Deformation substructure in body-centered cubic metals, Electron Microscopy and the strength of crystals, pp231-300. 36. A. Misra, J. T. Kim and R. Gibala, Room-temperature deformation behavior of a directionally solidified beta(b2)-(ni-fe-al) intermetallic alloy, Metall. Mater. Trans. A-Phys. Metall. Mater. Sci. 28 (1997), no. 1, 135-147. 37. H. I. Aaronson, G. Spanos, R. A. Masamura, R. G. Vardiman, D. W. Moon, E. S. K. Menon and M. G. Hall, Sympathetic nucleation - an overview, Elsevier Science Sa Lausanne, 1995, p.^pp. 107-123. 38. H. Nordberg and B. Aaronson, JISI. (1968), p.1263. 39. R. P. Smith, Trans. AIME 224, (1962), p.190. 40. 松田昭一, 鐵之鋼 62 (1962), p.61. 41. B. G. Baker and J. Nutting, Precipitation Processes in Steels (London: Iron and Steel Institute), Special Report 64 (1959). 42. Z. G. Yang and M. Enomoto, Discrete lattice plane analysis of baker-nutting related b1 compound/ferrite interfacial energy, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process. 332 (2002), no. 1-2, 184-192. 43. A. R. Mills, G. Thewlis and J. A. Whiteman, Nature of inclusions in steel weld metals and their influence on formation of acicular ferrite, Materials Science and Technology 3 (1987), no. 12, 1051-1061. 44. J. H. Shim, Y. W. Cho, S. H. Chung, J. D. Shim and D. N. Lee, Nucleation of intragranular ferrite at ti2o3 particle in low carbon steel, Acta Materialia 47 (1999), no. 9, 2751-2760. 45. T. Pan, Z. G. Yang, C. Zhang, B. Z. Bai and H. S. Fang, Kinetics and mechanisms of intragranular ferrite nucleation on non-metallic inclusions in low carbon steels, Elsevier Science Sa, 2006, p.^pp. 1128-1132. 46. K. J. Lee and J. K. Lee, Modelling of gamma/alpha transformation in niobium-containing microalloyed steels, Scr. Mater. 40 (1999), no. 7, 831-836. 47. S. Morito, H. Tanaka, R. Konishi, T. Furuhara and T. Maki, The morphology and crystallography of lath martensite in fe-c alloys, Acta Materialia 51 (2003), no. 6, 1789-1799. 48. J. R. Yang and H. Bhadeshia, Orientation relationships between adjacent plates of acicular ferrite in steel weld deposits, Materials Science and Technology 5 (1989), no. 1, 93-97. 49. Z. G. Yang and M. Enomoto, Calculation of the interfacial energy of b1-type carbides and nitrides with austenite, Metall. Mater. Trans. A-Phys. Metall. Mater. Sci. 32 (2001), no. 2, 267-274. 50. K. J. Irvine, F. B. Pickering and T. Gladman, JISI., . 205(1967),, p.161. 51. R. W. Fountain and J. Chipman, Trans. AIME 224(1962), p.559. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/25970 | - |
dc.description.abstract | 隨著工業的發展,大入熱量的銲接技術不斷進步,現今已經廣泛的在造船業、建築業、造橋工業等各方面應用。以往銲接熱影響區韌性不佳的問題目前已經可藉由合金設計的方式,控制沃斯田鐵晶粒大小以及產生理想的顯微結構來提升機械性質,但對於其詳細結構的發展機制仍然不甚了解,因此本研究對於銲道與熱影響區做了一系列顯微結構與機械性質的探討。
由顯微組織的觀察可發現銲道區域的典型針狀肥粒鐵以及熱影響區粗晶區的晶粒內肥粒鐵擁有相同的透鏡狀平板外型,但兩者尺寸相差約十倍。經由差排密度的量測可發現結構中均擁有高量的差排密度,這是由於兩者都是經由displacive相變態機制,為了維持不變平面應變而導入了高量的差排於其中。而透過鋼板設計鈦、鈮、硼合金元素的添加,使得熱影響區粗晶區晶粒大小控制在500μm左右,結構也以晶界上的高溫肥粒鐵以及晶粒內部的晶粒內肥粒鐵為主,性質不佳的費德曼肥粒鐵數量大幅減少,熱影響區的韌性甚至已經超越了銲道區域。 將實際焊接觀察結果與Gleeble熱模擬熱影響區粗晶區溫度曲線之結果對照,可發展出粗晶區晶粒內肥粒鐵之成核機制:當銲接完成從尖峰溫度緩慢冷卻時,(Ti,Nb)(N,C)複合型析出物會在先前沃斯田鐵內析出,此複合型析出物與沃斯田鐵之間有著cube-to-cube方位關係。由於擁有特定方位關係且晶格匹配性良好降低之間的介面能,同時在析出物周圍產生的Nb、C空乏區增加了相變態驅動力,晶粒內肥粒鐵會以此複合型析出物為成核位置成核生長,且兩者之間擁有Baker-Nutting方位關係,此為初生晶粒內肥粒鐵(Primary IGF);而從初生晶粒內肥粒鐵以及晶粒內部Idiomorphic Ferrite(IF)上經由sympathetic nucleation方式所生長出的次生晶粒內肥粒鐵(Secondary IGF)則會與先前沃斯田鐵之間擁有K-S方位關係。 | zh_TW |
dc.description.abstract | To support the recent construction and transportation industries, a high strength steel plate associated with the high heat input welding technique has been developed. By alloy design, controlling austenite grain size and desired microstructure, the toughness in heat affected zone has been largely improved.
The high heat input welded steel plate is produced by China Steel Corporation.In one aspect, the purpose of this study is to understand the relationship among microstructure of welded zone, microstructure of heat affected zone and the excellent mechanical properties after welding. In the other aspect, this study aims to elucidate the transformation mechanism of intragranular ferrite(IGF) in the heat affected zone. The microstructure of welded and heat affected zone have been investigated by optical microscope and transmission electron microscope. The acicular ferrite in welded zone and intragranular ferrite in heat affected zone both have high dislocation density. By addition of Ti, Nb, B, the prior austenite grain size can be refined to 500μm. Besides, the amount of widmenstatten ferrite can be reduced and further increase the amount of Intragranular ferrite by the present alloy design. Such a fine microstructure in the heated affected zone achieves excellent toughness superior to the toughness in welded zone. In order to study the transformation mechanism of intragranular ferrite, Gleeble machine was used to simulate the practical welding condition and the microstructure was studied by step quenching method using OM and TEM. During the cooling process, the complex carbonitrides (Ti,Nb)(C,N) precipitated from austenite grain with the cube-to-cube orientation relationship. These carbonitrides act as the nucleation sites for intragranular ferrite. The intragranular ferrite precipitating on the carbonitrides with the Baker-Nutting orientation relationship is called primary IGF. The following Intragranular ferrite called secondary IGF can transform by sympathetic nucleation and adopt K-S orientation relationship with the prior austenite grain. | en |
dc.description.provenance | Made available in DSpace on 2021-06-08T06:57:47Z (GMT). No. of bitstreams: 1 ntu-98-R96527040-1.pdf: 68724557 bytes, checksum: 30d1aa8f5da01a8d3d646742ef40fe20 (MD5) Previous issue date: 2009 | en |
dc.description.tableofcontents | 第一章:研究目的 1
第二章:文獻回顧 2 2-1 銲接之顯微組織 2 2-1-1 銲道 2 2-1-2 熱影響區 2 2-2 增加焊接熱影響區韌性的方法 14 2-3 電氣立銲 Electrogas Arc Welding (EGW) 20 2-4 差排密度量測方法與原理 24 2-5合金固溶與析出 28 第三章:實驗設計與方法 29 3-1實驗材料及實驗流程 29 3-1-1研究鋼材 29 3-1-2 實驗流程 30 3-2使用儀器 31 3-2-1 光學顯微鏡的觀察步驟 31 3-2-2電子探針X射線顯微分析(EPMA)的觀察步驟 31 3-2-3 TEM試片製作及觀察步驟 31 3-2-4 Gleeble熱模擬 32 3-2-5 場發射掃描式電子顯微鏡(FEG-SEM)及電子背向散射繞射技術(EBSD) 34 3-2-6 HV微硬度量測 34 第四章:實驗結果與討論 35 4-1大入熱量焊接鋼板之金相觀察 35 4-2 銲道與熱影響區粗晶區之比較 43 4-2-1 顯微結構之比較 43 4-2-2 差排密度之比較 46 4-2-3 機械性質之比較 57 4-3銲道針狀肥粒鐵與粗晶區晶粒內肥粒鐵生長機制之探討 61 4-3-1銲道針狀肥粒鐵之生長機制 61 4-3-2粗晶區晶粒內肥粒鐵(IGF)之生長機制 65 4-4 Gleeble熱模擬 82 4-4-1 熱模擬曲線 82 4-4-2 熱模擬粗晶區顯微組織觀察 83 4-5實際焊接粗晶區與Gleeble熱模擬試驗結果之討論 100 五、結論 104 參考文獻 106 | |
dc.language.iso | zh-TW | |
dc.title | 含鈦、硼、鈮鋼板之大入熱量銲接銲道與熱影響區顯微組織研究 | zh_TW |
dc.title | An Investigation on Microstructure of High Heat Input Welded Steel Plates with Ti、B、Nb | en |
dc.type | Thesis | |
dc.date.schoolyear | 97-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 王星豪,林東毅,張六文,黃慶淵 | |
dc.subject.keyword | 針狀肥粒鐵.晶粒內肥粒鐵.大入熱量銲接,熱影響區,鈦鈮複合型析出物, | zh_TW |
dc.subject.keyword | Acicular ferrite,Intragranular ferrite,High heat input welded,Heat affected zone,Complex carbonitrides (Ti,Nb)(C,N), | en |
dc.relation.page | 108 | |
dc.rights.note | 未授權 | |
dc.date.accepted | 2009-07-14 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-98-1.pdf 目前未授權公開取用 | 67.11 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。