請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/25163
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 黃升龍 | |
dc.contributor.author | Ying-Jie Chen | en |
dc.contributor.author | 陳英傑 | zh_TW |
dc.date.accessioned | 2021-06-08T06:04:00Z | - |
dc.date.copyright | 2011-08-10 | |
dc.date.issued | 2011 | |
dc.date.submitted | 2011-08-05 | |
dc.identifier.citation | [1] R. Leitgeb, C. K. Hitzenberger, and A. F. Fercher, 'Performance of fourier domain vs. time domain optical coherence tomography,' Optics Express, vol. 11, pp. 889-894, 2003.
[2] D. B. Gasson and B. Cockayne, 'Oxide crystal growth using gas lasers, ' Journal Of Materials Science, vol. 5, pp. 100-104, 1970. [3] J. Stone and C. A. Burrus, 'Self-contained LED-pumped single crystal Nd:YAG fiber laser,' Fiber and Integrated Optics, vol. 2, pp. 19-46, 1979. [4] N. B. Angert, N. I. Borodin, V. M. Garmash, V. A. Zhitnyuk, A. G. Okhrimchuk, O. G. Siyuchenko, and A. V. Shestakov, 'Lasing due to impurity color centers in yttrium aluminum garnet crystals at wavelengths in the range 1.35-1.45 μm,'Soviet Journal of Quantum Electronics, vol. 18, pp. 73-74, 1988. [5] P. M. W. French, N. H. Rizvi, and J. R. Taylor,'Continuous-wave mode-locked Cr4+:YAG laser,' Optics Letters, vol. 18, pp. 39-41, 1993. [6] A. Sennaroglu and C.R. Pollock, 'Continuous-wave self-mode-locked operation of a femtosecond Cr4+:YAG laser,' Optics Letters, vol. 19, pp. 390-392, 1994. [7] A. Sennaroglu and C.R. Pollock,'Efficient continuous-wave chromium-doped YAG laser, 'Optical Society of America , vol. 12, pp. 930-937 , 1995. [8] S. Ishibashi, K. Naganuma, and I. Yokohama, 'Cr, Ca:Y3Al5O12 laser crystal grown by the laser heated pedestal growth method,' Journal Of Crystal Growth, vol. 183, pp. 614-621, 1998. [9] I. T. Sorokina, S. Naumov, E. Sorokin, and E. Wintnter, 'Directly diode-pumped tunable continuous-wave room-temperature Cr4+:YAG laser,' Optics Letters, vol. 24, pp. 1578-1580, 1999. [10] D. J. Ripin, C. Chudobs, J. T. Gopinath, J. G. Fujimoto, and E. P. Ippen, ' Generation of 20-fs pulses by a prismless Cr4+:YAG laser,' Optics Letters, vol. 27, pp. 61-63, 2002. [11] S. Ishibashi and K. Naganuma, “Diode pumped Cr4+:YAG single crystal fiber laser,” in Advanced Solid-State Lasers, OSA Technical Digest, Davos, Switzerland, pp. 103, 2000. [12] C. C. Lai, C. P Ke, S. K Liu, D. Y. Jheng, D. J. Wang, M. Y. Chen, Y. S. Li, P. S. Yeh, and Sheng-Lung Huang, 'Efficient and low-threshold Cr4+:YAG double-clad crystal fiber laser,' Optics Letters, vol. 36, pp. 784-786, 2011. [13] J. L. Caslavsky and D. J. Viechinicki, 'Melting behaviour and metastability of yttrium aluminium garnet (YAG) and YAlO3 determined by optical differential thermal analysis,' Journal of Materials Science Letters, vol. 15, pp. 1709, 1980. [14] H. Eilers, W. M. Dennis, W. M. Yen, S. Kück, K. Peterman, G. Huber, and W. Jia, 'Performance of a Cr:YAG Laser,' IEEE Journal of Quantum Electronics, vol. 29, pp. 2508-2512, 1993. [15] S. A. Markgraf, M. F. Pangborn, and R. Dieckmann, 'Influence of different divalent co-dopants on the Cr4+ content of Cr-doped Y3Al5O12,' Journal Of Crystal Growth, vol. 180, pp. 81-84, 1997. [16] N. I. Borodin, A. G. Okhrimchuk, and A. V. Shestakov, 'Polarizing spectroscopy of Y3Al5O12, SrAl2O4, and CaAl2O4 crystals containing Cr4+,' in Advanced Solid State Lasers, OSA Proceeding Series, vol. 13, eds. G. Dube and L. Chase, (Optical Society of America, Washington, D. C., 1992), pp. 42-46. [17] A. Sennaroglu, 'Analysis and optimization of lifetime thermal loading in continuous-wave Cr4+-doped solid-state lasers,' Journal of the Optical Society of America B, vol. 18, pp. 1578-1586, 2001. [18] G. M. Zverev and A. V. Shestakov,' Tunable near-infrared oxide crystal lasers,' in Tunable Solid State Laser, OSA Proceedings Series, vol. 5, M. Shnad and H. P. Jenssen, (Optical Society of America, Washington, D. C., 1989), pp. 66-70. [19] H. Weber, G. Herziger, and R. Poprawe 'Laser Physics and Applications,' Springer. [20] Eugene Hecht , 'Optics, ' 4th, Addison Wesley, pp. 101, 2002. [21] F. Favre and D. L. Guen, '820 nm of continuous tenability for an external cavity semiconductor laser, ' Electronics Letters, vol. 27, pp. 183-184, 1991. [22] K. C. Harvey and C. J. Wayatt, 'External-cavity diode-laser using a grazing incidence diffraction grating , ' Optics Letters, vol. 16, pp. 910-912, 1991. [23] P. Zorabedian, 'Characteristics of an grating-external-cavity semiconductor laser containing intracavity orisn bean expanders,' Journal of Lightwave technology, vol.10, pp. 330-334, 1992. [24] M.de Labachelerie and G. Passedat, 'Mode-hop suppression of Littrow grating-tuned lasers,' Applied Optics, vol. 32, pp. 270, 1993. [25] 郭重佑,'利用電致光吸收調變之多通道波長可調Q-switched外腔半導體雷射,' 國立中山大學,碩士論文, 2007. [26] D. R. Preuss and J. L. Gole 'Three-stage birefringent filter tuning smoothly over the visible region: theoretical treatment and experimental design,' Applied Optics, vol. 19, pp. 702-710 , 1980. [27] Ivan Solc, 'Birefringent Chain Filter,' Journal of the Optical society of America, vol. 55, pp. 621, 1965. [28] http://en.wikipedia.org/wiki/Fabry%E2%80%93P%C3%A9rot_interferometer [29] 余樹楨,'晶體之結構與性質',渤海堂, 2000. [30] 林志威, '摻鉻釔鋁石榴石雙纖衣晶體光纖雷射,'國立中山大學, 碩士論文, 2008. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/25163 | - |
dc.description.abstract | 頻域光學同調斷層掃描技術,(frequency domain optical coherence tomography; FDOCT )具高速掃描、高解析度以及掃描深度不再受限於光程改變之範圍等優點,FDOCT已成為現今之生醫光電領域與醫學研究已成為極重要之三維成像技術,而該技術所使用的光源為寬頻光源或是可調波長雷射,本論文以摻鉻釔鋁石榴石晶體光纖作為增益介質所研製出的晶纖雷射具備體積小、低閥值功率等優點,具有極高的潛力發展成FDOCT的系統光源。
我們藉由光學鍍膜技術於晶纖兩端鍍上高反射薄膜作為共振腔而產生雷射輸出,雷射的閥值功率為61.9 mW,是Cr4+:YAG雷射文獻中最低的七分之ㄧ,斜線效率可以達到7.75%,為了在腔內插出調頻元件,更近一步將系統共振腔拉長成為外腔式雷射系統並以球面鏡來作為輸出耦合透鏡,雷射輸出的斜線效率亦可達到6.65%,雷射的閥值功率為102.35 mW,同時以實驗來分析驗證雷射系統的損耗與傳輸模態,並透過雷射效率的模擬程式來計算出外腔式雷射系統的往返損耗,計算的結果為0.465 dB,系統可以額外承受的損耗為0.295 dB。 本論文提出兩種調頻雷射的架構,分別是V型外部共振腔調頻雷射系統與線型外部共振腔雷射系統。我們透過模擬分析來計算系統的往返損耗,評估哪一個架構較適合以實驗來驗證。V型外部共振腔調頻雷射系統的往返損耗為0.959 dB,若採用此系統晶纖長度至少要大於4 cm才可以產生雷射輸出;線型外部共振腔雷射系統往返損耗為0.755 dB,若採用此系統晶纖長度只要大於2.7 cm就可以產生雷射輸出,此外,線型共振腔系統架構也較簡單,所以實驗上採用線型架構作來產生可調波長雷射輸出。 | zh_TW |
dc.description.abstract | Frequency domain optical coherence tomography (FDOCT) has many advantages such as high sweep rate, high axial resolution, and the scanning depth of system is no longer confined by reference arm movement range, therefore, it has become an important scanning technique in the bio photonics realm and medical research. The light source of FDOCT system can be broadband light source or tunable laser, in this thesis, we use Cr4+:YAG double-clad crystal fiber as gain medium to fabricate fiber laser is equipped with advantages of low threshold and compact system structure, so it has considerable potential to develop as light source of FDOCT system.
By using coating technology, we have HR coating in the end face of fiber to build laser cavity. Threshold of laser system is 61.9 mW which is one seventh lower than literature and slope efficiency is 7.75%, respectively. In order to insert tuning component in laser cavity, external cavity laser system is achieved. Slope efficiency of system is also as high as 6.65%, and threshold becomes 102.35 mW, we also analyze both round trip loss and mode composition in laser cavity by experiment and simulation program. The round trip loss in external cavity laser system is 0.465 dB, and the system tolerance in loss is 0.295 dB. There are two tunable laser system proposed in this thesis, and it is V-shape cavity tunable laser system and Linear cavity tunable laser system. In order to assess which one is suitable for tunable laser system, we utilize simulation program to calculate round trip loss in laser system, respectively. Round trip loss in V-shape cavity tunable laser system is 0.959 dB. The length of fiber in system should be longer than 4 cm to generate laser output, and the alignment of system is difficult; round trip loss in Linear cavity tunable laser system is 0.755 dB. The length of fiber in this system should be longer than just 2.7 cm to generate laser output, and the alignment of system is easy, so we decide to adopt Linear cavity tunable laser system. | en |
dc.description.provenance | Made available in DSpace on 2021-06-08T06:04:00Z (GMT). No. of bitstreams: 1 ntu-100-R98941084-1.pdf: 3393712 bytes, checksum: 4ad89802985957772b9c72f3b8792d70 (MD5) Previous issue date: 2011 | en |
dc.description.tableofcontents | 目錄
中文摘要 I Abstract V 目錄 VI 圖目錄 VIII 表目錄 XII 第一章 緒論 1 第二章 Cr4+:YAG晶體光纖雷射原理 4 2.1 晶體特性與能階模型 4 2.2 晶體光纖傳輸模態 11 2.3 雷射共振腔介紹 14 2.4 調頻元件 17 第三章 元件製備 23 3.1 晶體生長架構 23 3.2 Cr4+:YAG雙纖衣晶體光纖之特性分析 29 3.3 元件之研磨與拋光 33 第四章 Cr4+:YAG雙纖衣晶體光纖雷射特性量測 39 4.1晶纖雷射系統與雷射效率分析 39 4.1.1晶纖雷射架構 39 4.1.2雷射共振腔之光學鍍膜 42 4.1.3實驗結果分析 45 4.2外腔式雷射系統與雷射效率分析 47 4.2.1外腔式雷射架構 47 4.2.2雷射共振腔之光學鍍膜 49 4.2.3實驗結果分析 53 4.3比較不同架構之雷射效率 63 4.3.1 雷射效率理論與模擬程式 63 4.3.2 雷射效率模擬結果 69 第五章 外部共振腔調頻雷射理論與模擬 76 5.1 V型外部共振腔調頻雷射理論架構與模擬數值分析 76 5.1.1 MATLAB模擬分析 76 5.1.2利用ZEMAXZ非高斯光束所造成的影響 82 5.1.3共振腔裡光束尺寸的變化 85 5.2 線型外部共振腔調頻雷射理論架構與模擬分析 92 第六章 結論與未來工作 96 參考文獻 98 | |
dc.language.iso | zh-TW | |
dc.title | 外腔式摻鉻釔鋁石榴石雙纖衣晶體光纖雷射 | zh_TW |
dc.title | External cavity Cr4+:YAG double-clad crystal fiber laser | en |
dc.type | Thesis | |
dc.date.schoolyear | 99-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 王維新,黃鼎偉,林恭如 | |
dc.subject.keyword | 頻域光學同調斷層掃描技術(FDOCT),外腔式摻鉻釔鋁石榴石雙纖衣晶體光纖雷射, | zh_TW |
dc.subject.keyword | Frequency domain optical coherence tomography (FDOCT),External cavity Cr4+:YAG double-clad crystal fiber laser, | en |
dc.relation.page | 100 | |
dc.rights.note | 未授權 | |
dc.date.accepted | 2011-08-05 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 光電工程學研究所 | zh_TW |
顯示於系所單位: | 光電工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-100-1.pdf 目前未授權公開取用 | 3.31 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。