請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/23824
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 林新智 | |
dc.contributor.author | Hung-Ting Lin | en |
dc.contributor.author | 林泓霆 | zh_TW |
dc.date.accessioned | 2021-06-08T05:10:38Z | - |
dc.date.copyright | 2011-07-25 | |
dc.date.issued | 2011 | |
dc.date.submitted | 2011-07-11 | |
dc.identifier.citation | 1.黃雨順,冶金熱處理,(1981)354。
2.楊智超,鎂合金材料特性及新製程發展,工業材料,152(1999)72。 3.P. Zhang and J. Lindemann, Scripta Materialia, Influence of shot peening on high cycle fatigue properties of the high-strength wrought magnesium alloy AZ80, 52 (2005) 485. 4.P. Zhang and J. Lindemann, Scripta Materialia, Effect of roller burnishing on the high cycle fatigue performance of the high-strength wrought magnesium alloy AZ80, 52 (2005) 1011. 5.F. Andreatta, I. Apachitei, A.A. Kodentsov, J. Dzwonczyk, J. Duszczyk, Electrochimica Acta,Volta potential of second phase particles in extruded AZ80 magnesium alloy, 51 (2006) 3551. 6.J. Swiostek, D. Letzing, and K. U. Kainer, Hydrostayic, Metal Science and Heat Treatment, extrusion at 100°C and its effect on the grain size and mechanical properties of magnesium alloys, 48 (2006) 11. 7.Y. Uematsu, K. Tokaji, M. Kamakura, K. Uchida, H. Shibata and N. Bekku, Mater. Materials Science and Engineering A. A, Effect of extrusion conditions on grain refinement and fatigue behaviour in magnesium alloys , 434 (2006) 131. 8.陳信吉、陳復國,AZ 系鎂合金沖鍛成形之研究,工業材料,198(2003)126。 9.B.L. Mordike and T. Ebert, Mater. Materials Science and Engineering, Magnesium Properties-applications-potential, 302 (2001) 37. 10.M.F. Horstemeyer, N. Yang, K. Gall, D.L. McDowell, J. Fan and P.M. Gullett, Acta Mater, High cycle fatigue of a die cast AZ91E-T4 magnesium alloy, 52 (2004) 1327. 11.G. Eisenmeier, B. Holzwarth, H.W. Hoppel and H. Mughrabi, Mater. Sci. Eng. A, Cyclic deformation and fatique behaviour of the magnesium alloy AZ91, 319-321 (2001) 578. 12.王建義,超輕量鎂合金開發,工業材料,184(2002)132。 13.P.C. Wang, C.C. Lin, T.Y. Huang, H.C. Lin Y.H. Lee, M.T. Yeh and J.Y. Wang, Effects of 2 mass% Li addition on the AZ80 Mg alloy, Materials Transactions 49 (2008) 913-917 14.P.C. Wang, M.C. Lin, H.C. Lin, K.M. Lin, M.T. Yeh, C.Y. Lin, Effects of aging treatment on microstructure and mechanical property of an AZ80N Magnesium alloy, Material Science and Engineering A, 527 (2010) 4076-4081. 15.D.S. Tawil, Corrosion and surface protection developments, magnesium technology in Proceedings of the Conference, (1986) 66. 16.戴光勇,鎂合金表面處理技術(上),材料與社會,24(1988)57。 17.昌山正孝著、賴狄陽,非鐵金屬材料,復漢出版社,(1993)174。 18.ASM Specialty Handbook, Magnesium and Magnesium Alloys, ASM International, (2003) 3-43. 19.F.A. Lowenheim, Modern Electroplating, Wiley, New York, (1974). 20.王建義,鎂合金板材壓型加工技術,工業材料,170(2001)132。 21.R.W.Cahn, P.Haasen and E.J.Kramer, Materials Science and Technology, Structure and Properties of Nonferrous Alloys, 8 (1996) 131. 22.C. H. Caceres, C. J. Davidson, J. R. Griffiths and C. L. Newton, Materials Science Engineering A, 325 (2002) 344-355. 23.C. Shaw and H. Jones, Materials Sci. Eng. A, 226-228 (1997) 856-860. 24.G.V. Raynor, The Physical Metallurgy of Magnesium and its Alloys, CH. IV, Lattice Spacings, (1959). 25.T.B.Massalski, Binary Alloy Phase Diagrams, 2nd ed., ASM INTERNATIONAL, Materials Park, OH, (1990) 1487. 26.張永耀,金屬熔銲學,徐氏基金會,台北,(1976)134-170。 27.E.Cerri, M.Cabibbo and E.Evangelista, Materials Science and Engineering A., 333 (2002) 208. 28.陳信宏,鎂合金薄板沖壓成形性之研究,國立台灣大學機械工程研究所碩士 論文(2002)。 29.E. Cerri, M. Cabibbo and E. Evangelista, Materials Science Engineering, Microstructural evolution during high-temperature exposure in a thixocast magnesium alloy, 333 (2002) 208. 30.A.Bussiba, A.Ben Artzy, A.Shtechman, S.Ifergan and M.Kupiec, Materials Science and Engineering. A, 302 (2001) 56. 31.J.J. H. Nordlien, S. Ono, N. Masuko and K. Nisancioglu, Corrosion Science, TEM investigation of naturally formed oxide films on pure magnesium, 39 (1997) 1397 32.鮮祺振,腐蝕控制,(1998)15。 33.Guangling Song, Andrej Atrens, Xianliang Wu, and Bo Zhang, Corrosion Science, 40 (1998) 1769. 34.M.Avedesian and Hugh Baker, Magnesium and magnesium alloys, ASM Specialty Handbook, (1999). 35.Genevieve Baril, Christine Blanc and Nadine Pebebe, Electrochemical Society Proceedings, 23 (2000) 166. 36.O. Lunder, T. Kr. Aune, K. Nisanciogl, Corrosion, 43 (1987) 291. 37.Nadine Pebere, Christian Riera and Francis Dabosi, Investigation of magnesium corrosion in aerated sodium sulfate solution by electrochemical impedance spectroscopy, Electrochimica Acta, 35 (1990) 555. 38.S.K.Das and L.A.Davis, High performance aerospace alloys via rapid solidification processing, Mater.Sci. Eng., 98(1998) 1 39.Guangling Song, Andrej Atrens and Matthew Dargusch, Influence of microstructure on the corrosion of diecast AZ91D, Corrosion Science, 41 (1999) 249. 40.I. Gowrisankar, A.K. Bhaduri, V. Seetharaman, D.D.N. Verma, D.R.G. Achar, “Effect of Number of Passes on the Structure and Properties of Submerged Arc 106 Welds of AISI Type of 316L,” Welding JOURNAL, 66( 1987) 147-154. 41.柯賢文, 腐蝕及其防制, 全華科技圖書公司, 民國八十七年。 42.W. Tang, EH. Han, YB. Xu, L. Liu, Acta Metall Sinica, Effect of heat treatment on microstructure and properties of AZ80 magnesium alloy, 41(2005) 1199. 43.毛衛明、張新民,晶體材料織構定量分析,冶金工業出版社,(1993)。 44.Standard Test Methods for Tension Testing of Metallic Materials, Designation: E 8M-01. 45.Standard Test Methods for Notched Bar Impact Testing of Metallic Materials, Designation: E 23-02. 46.Rajan Ambat, Naing Naing Aung and W. Zhou, Corrosion Science, 42 (2000) 1433. 47.蔡承洋,利用電解還原沉積擴散法備製單一bcc結構之Mg-12Li-XAl-Zn合金(X=3、9)及其應用於鎂電池陽極材料的電化學表現之研究,國立中興大學材料工程學研究所碩士論文(2007) 48.Yingwei Song, Dayong Shan, Rongshi Chen, En-Hou Han, Corrosion characterization of Mg–8Li alloy in NaCl solution, Corrosion Science 51 (2009) 1087–1094. 49.NEDO民間航空機基盤技術計畫相關,次世代航空機用構造部材創製、加工技術開發計畫。 | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/23824 | - |
dc.description.abstract | 近年來全球在輕量化和符合環保需求的潮流之下,鎂合金的重要性與日俱增。其具有高比強度、低密度、比彈性係數佳等優點,再加上礦藏量豐富、再回收性佳,可取代車輛之部分構件以節省能源耗損。另一方面,鎂合金擁有良好的制震能、優異的散熱性及電磁遮蔽性(EMI),已成為3C產業中最具潛力的材料。
AZ系列鎂合金主要是在鎂中添加鋁和鋅,是目前商業化最成功的鎂合金。當鋁元素含量大於6wt.%時,會形成第二相Mg17Al12。此β相為介金屬化合物,可以達到析出強化的效果,並且提升鎂合金的抗腐蝕性;添加微量鋅則可以對鎂合金達到固溶強化的效果,增加抗潛變的能力,並且降低合金中的雜質含量。然而,AZ系列鎂合金為六方最密堆積結構(HCP),在常溫加工時,其塑性變形幾乎僅為底面滑移所貢獻。也因為如此,鎂合金一直存在著成形性不佳、延展性不足等問題。鋰為所有元素中密度最低的金屬,僅有0.534 g/cm3。於鎂合金中添加鋰能有 效改善成形性不佳的問題,並且再更進一步降低鎂合金的密度。 本實驗主要研究AZ80+3wt%Li鎂合金,針對其擠製材之基本性質進行分析,並將此AZ80+3wt%Li鎂合金進行熱處理(T5、T6),探討其析出強化行為和機械性質。實驗結果顯示,此合金的密度僅有1.71g/cm3。在室溫下,無法固溶於母材中的鋰元素傾向和鋁結合形成AlLi相,這也使得AZ80+3wt%Li鎂合金擠製材相對於AZ80有較佳的延展性。同時,AZ80+3wt%Li鎂合金擠製材於110℃、170℃和230℃進行時效處理,皆呈現明顯的析出強化,於110℃時效16小時可以達到最高強度356MPa,硬度也可以達到Hv88.2,此時的析出相為β相Mg17Al12加上AlLi相;另外,AZ80+3wt%Li鎂合金經450℃持溫24小時固溶處理之後,於110℃、170℃和230℃時效處理,亦呈現明顯的析出強化,於110℃時效32小時可以達到最高強度373MPa,硬度也可以達到Hv115.5,此時的析出相則為AlLi相。然而, AlLi於水溶液中相當不穩定,會水解成鋁元素並於水溶液中釋放鋰離子。再加上鋰的活性大,添加3wt%鋰於鎂合金中會大幅降低鎂合金的抗腐蝕能力。 | zh_TW |
dc.description.abstract | Magnesium alloys are considered as potential candidates for numerous applications, especially in transportation vehicles or lightweight sectors for 3C products owing to their excellent properties, such as low density, high specific strength, high damping capacity and high recycle ability. The AZ series is mainly based on the Mg-Al alloy system and leads most of the magnesium alloys. If the Al addition in these AZ-series magnesium alloys exceeds 6 mass%, the β-Mg17Al12 inter-metallic compounds will precipitate within the matrix and the mechanical strength increases. Furthermore, adding slight Zn into Mg alloys is to enhance their corrosion resistance. These Zn atoms may also have the effect of solid-solution strengthening. However, it is commonly recognized that magnesium possesses poor formability because of its hexagonal close-packed structure. Adding Lithium with extremely low density 0.534 g/cm3 can improve this shortcoming and further reduce weight.
In the present study, by 3mass% addition of Lithium on AZ80 Mg alloy, we study mechanical properties of as-extruded magnesium alloy. Furthermore, to more understand this AZ80+3mass% Mg alloy, the effects of heat treatments (T5 and T6) on its precipitation behavior and mechanical properties will be systematically investigated. Experimental results show that adding 3mass% Li to AZ80 alloy can obviously increase the ductility. Meanwhile, as-extruded AZ80+3%Li specimens will produce the Mg17Al12+AlLi precipitates after aging from 110℃ to 230℃. The 110℃ aged specimen has a maximum tensile strength of 356 MPa with corresponding aging time of 16 hours. The 450℃ solution-treated specimens will produce the AlLi precipitates after aging from 110℃ to 230℃. The 110℃ aged specimen has a maximum tensile strength of 373 MPa with corresponding aging time of 32 hours. However, the addition of 3mass% Lithium on AZ80 Magnesium alloy will reduce the corrosion resistance due to the highly activity of Lithium and hydrolitic reaction of AlLi precipitate. | en |
dc.description.provenance | Made available in DSpace on 2021-06-08T05:10:38Z (GMT). No. of bitstreams: 1 ntu-100-R98527024-1.pdf: 10916226 bytes, checksum: 6203630c78fa9db76d7361220853564a (MD5) Previous issue date: 2011 | en |
dc.description.tableofcontents | 致謝 I
摘要 II Abstract III 目錄 IV 圖目錄 VII 表目錄 X 第一章 緒論 1 1.1 前言 1 1.2 研究動機 2 第二章 文獻回顧 3 2.1 鎂合金簡介 3 2.2鎂合金的特性 5 2.3 鎂合金的分類 8 2.4 添加合金元素對鎂合金之影響 9 2.5 鎂合金之腐蝕行為 17 2.5.1 腐蝕的定義 17 2.5.2 鎂之腐蝕特性 17 2.5.3 添加合金元素對鎂合金腐蝕之影響 19 2.5.4 第二相對鎂合金腐蝕之影響 20 2.5.5 腐蝕電化學量測【40.41】 20 2.6 鎂合金之時效析出行為 23 第三章 實驗方法與步驟 25 3.1實驗流程圖 25 3.2合金熔煉與試片製備 25 3.3試片成分分析 25 3.4 XRD繞射結構分析 27 3.5 顯微組織觀察 27 3.5.1 光學顯微鏡觀察 27 3.5.2 SEM顯微組織觀察及EPMA成分分析 27 3.5.3 TEM試片製作及觀察 27 3.6 抗腐蝕性質測試 28 3.6.1電化學試驗 28 3.6.2 化學浸泡試驗 29 3.6.3 鹽霧試驗 29 3.7 機械性質量測 29 3.7.1 維克氏硬度量測(Vickers) 29 3.7.2 拉伸試驗(Tensile test) 29 3.7.3 衝擊試驗(Charpy-notch impact test) 31 第四章 結果與討論 32 4.1合金基本性質量測 32 4.1.1成分分析 32 4.1.2 X-ray繞射分析 33 4.1.3 金相顯微組織觀察 35 4.1.4 SEM表面觀察與EPMA分析 36 4.1.5 衝擊試驗 38 4.1.6 抗腐蝕性測試 42 4.1.6.1 電化學試驗 42 4.1.6.2 浸泡試驗 44 4.1.6.3 鹽霧試驗 46 4.1.6.4 腐蝕性質討論 46 4.2 T6處理 49 4.2.1 機械性質與顯微組織探討 49 4.2.2 TEM分析 62 4.3 T5處理 65 4.3.1 機械性質與顯微組織探討 65 4.3.2 TEM分析 67 第五章 結論 75 參考文獻 76 | |
dc.language.iso | zh-TW | |
dc.title | AZ80+3%Li鎂合金時效處理之研究 | zh_TW |
dc.title | A Study of Aging Treatment on AZ80+3%Li Magnesium Alloy | en |
dc.type | Thesis | |
dc.date.schoolyear | 99-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 薛人愷,葉明堂 | |
dc.subject.keyword | 鎂鋁合金,時效處理,機械性質,AlLi相, | zh_TW |
dc.subject.keyword | magnesium alloys,aging treatment,mechanical properties,AlLi phase, | en |
dc.relation.page | 79 | |
dc.rights.note | 未授權 | |
dc.date.accepted | 2011-07-11 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-100-1.pdf 目前未授權公開取用 | 10.66 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。