請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/22470
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 黃秉鈞 | |
dc.contributor.author | Zih-Hao Liao | en |
dc.contributor.author | 廖子豪 | zh_TW |
dc.date.accessioned | 2021-06-08T04:18:32Z | - |
dc.date.copyright | 2010-07-28 | |
dc.date.issued | 2010 | |
dc.date.submitted | 2010-07-26 | |
dc.identifier.citation | [1]吳佳峻:『獨立型太陽能發電系統之設計分析與應用』,國立臺灣大學機械工程學系研究所碩士論文,2004年
[2]吳民聖:『獨立型太陽能路燈之高性能充放電控制研究』,國立台灣大學機械工程學系研究所碩士論文,2005年 [3]DOE-HDBK-1084-95,1995『PRIMER ON LEAD-ACID STORAGE BATTERIES』 [4]IEEE Std. 2362TM-2003,『IEEE Guide for Selection, Charging, Test, and Evaluation of Lead-Acid Batteries Used in Stand-Alone Photovoltaic (PV) System』 [5]鄭培璿:『高頻快速充電電路策略之研究』,國立臺灣大學電機工程學研究所博士論文 [6]Steve Harrington,Ktech Corporation,James Dunlop,7th Annual Battery Conference on Applications and Advances,『Battery Charge Controller Characteristics in Photovoltaic Systems』,Florida Solar Energy Center [7]何珮儀:『獨立型太陽能系統蓄電池充電效率提升硏究』,國立台灣大學機械工程學系研究所碩士論文,2009年 [8]顏仕銘:『獨立型移動式太陽能冰箱系統設計與控制研究』,國立台灣大學機械工程學系研究所碩士論文,2006年 [9]何榮文:『太陽能車發電系統控制』,國立台灣大學機械工程學系研究所碩士論文,2001年 [10]王德志、范孝銓、李義寧:閥控密封鉛酸蓄電池,中國鐵道出版社,2001年 [11]黃秉鈞:『系統識別講義』,國立臺灣大學機械工程學系 [12]郭丁嘉:『迷你環控箱之研發』,國立台灣大學機械工程學研究所碩士論文,2003年 [13]黃秉鈞:『自動控制(一)講義』,國立臺灣大學機械工程學系 [14]Richard C. Dorf, Robert H. Bishop:『MODERN CONTROL SYSTEMS』,9th Edition, Prentice Hall [15]范逸之、陳立行、孫德萱、程正孚:『Visual Basic 與串並列通訊控制實務』,文魁資訊股份有限公司,2001年 [16]森永森:『Visual Basic 6.0』視窗程式設計經典,碁峰資訊,1999年 [17]黃煥翔:『熱電共生太陽能發電統研製』,國立臺灣大學機械工程學系研究所碩士論文,2000年 [18] J. Li*, E. Murphy, J. Winnick, P.A. Kohl,Journal of Power Sources 102 (2001) 294–301,『Studies on the cycle life of commercial lithium ion batteries during rapid charge–discharge cycling』 | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/22470 | - |
dc.description.abstract | 本研究主要探討如何提升太陽電池發電系統充電性能,以用於太陽能LED照明系統。研究內容包含鉛酸蓄電池高溫環境的充電特性,超級電容應用於太陽能充電系統提升充電性能探討,以及鋰電池充放電控制,最後討論使用環控箱來存放不同蓄電池的成本分析。
鉛酸蓄電池在高溫環境操作時壽命會急速下降,所以在高溫環境下本研究利用環控箱放置鉛酸蓄電池,使得鉛酸蓄電池可以在最佳溫度操作點作充放電循環,延長鉛酸蓄電池壽命。 戶外實測證明超級電容並聯鉛酸電池系統對太陽電池充電效率可以提升,再以輻射量變化效應解釋加入超級電容得以提升效率的原因,並且以太陽電池充電系統充電模型模擬輻射量變化劇烈段佐證加入超級電容可以增加充電能量。 利用鋰電池動態系統建立太陽電池充電系統模型,設計PI控制器,運用PWM充放電控制技術,使得鋰電池端電壓不超過電壓過充點,增加太陽發電系統可靠度。 針對高溫環境下蓄電池選用,比較鉛酸蓄電池與鋰電池搭配與不搭配環控箱的成本效益。 | zh_TW |
dc.description.abstract | The research focuses on how to enhance charge performance of solar cell power generation system, for use in solar LED lighting systems. First, discuss lead-acid battery charge characteristics under high ambient temperature. Second, investigate increasing energy storage of solar cell generation system by paralleling supercapacitor. Third, design Li-ion battery charge and discharge cycle-use controller. Finally, discuss the cost of using temperature-controlled box to place different batteries.
Lead-acid battery cycle-use life must rapidly decline when operating in high ambient temperature. For prolonging lead-acid battery cycle-use life, this research used temperature-controlled box to place lead-acid battery under optimal temperature operation point. Outdoor experimental results indicate that lead-acid battery in parallel supercapacitor system can improve the charge efficiency of solar cell power generation system. Then use effects of changes in radiation to explain why paralleling supercapacitor can improve the charge efficiency. After that, use solar cell charging model to simulate under radiation rapid changing. From the results, both simulation and outdoor experimental result show that paralleling supercapacitor can increase storage energy. For improving solar cell generation system’s reliability, this research builds the dynamic models of Li-ion battery and designs a PI controller to limit the charge voltage. Choose the best battery under high ambient temperature. Then compare with the cost of lead-acid and of Li-ion battery match or do not match the temperature-controlled box. | en |
dc.description.provenance | Made available in DSpace on 2021-06-08T04:18:32Z (GMT). No. of bitstreams: 1 ntu-99-R97522831-1.pdf: 3021846 bytes, checksum: 76c0e46d5c94719a1d9f8c340ba3c3d7 (MD5) Previous issue date: 2010 | en |
dc.description.tableofcontents | 誌謝 I
摘 要 II Abstract III 目錄 V 表目錄 VII 圖目錄 IX 符號說明 XII 第一章 序論 1 1.1 研究動機 1 1.2 文獻回顧 2 1.3 研究內容 4 第二章 鉛酸蓄電池可靠度提升 5 2.1 高溫環控箱 5 2.2 鉛酸蓄電池高溫操作特性 7 2.3 充放電控制器可靠度 10 2.4 熱泵環控箱 11 2.5 實驗結果與討論 14 第三章 超電容對太陽能充電系統充電效率提升研究 17 3.1鉛酸電池並聯超級電容系統 17 3.2鉛酸電池動態模型建立 19 3.3 超級電容動態模型建立 27 3.4 超級電容並聯鉛酸電池對太陽電池充電效率提升 32 第四章 利用鋰電池於太陽電池發電系統的性能提升 43 4.1鋰電池動態模型建構 43 4.2實驗設計 44 4.3 電流響應模型 47 4.4 實驗結果與討論 49 4.5 鋰電池充放電控制器設計 53 4.6 戶外測試結果 58 4.7 鋰電池高溫環境測試 62 第五章 蓄電池於高溫環境搭配熱泵環控箱成本效益分析 65 第六章結論與未來展望 71 6.1結論 71 6.2 未來展望 72 參考文獻 73 | |
dc.language.iso | zh-TW | |
dc.title | 太陽電池充電系統充電性能提升研究 | zh_TW |
dc.title | A Research on Improving Charge Performance of Solar Energy Generation System | en |
dc.type | Thesis | |
dc.date.schoolyear | 98-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 白先聲,顏瑞和 | |
dc.subject.keyword | 鉛酸蓄電池,超級電容,鋰電池,充電效率,可靠度, | zh_TW |
dc.subject.keyword | Lead-Acid battery,Supercapacitor,Li-ion battery,Charge Efficiency,Reliability, | en |
dc.relation.page | 74 | |
dc.rights.note | 未授權 | |
dc.date.accepted | 2010-07-27 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-99-1.pdf 目前未授權公開取用 | 2.95 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。