請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/22243
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 林清富(Ching-Fuh Lin) | |
dc.contributor.author | Chao-Shuo Chen | en |
dc.contributor.author | 陳朝碩 | zh_TW |
dc.date.accessioned | 2021-06-08T04:14:16Z | - |
dc.date.copyright | 2011-08-23 | |
dc.date.issued | 2011 | |
dc.date.submitted | 2011-08-18 | |
dc.identifier.citation | [1] Professor R. E. Smalley, 'Top Ten Problems of Humanity for Next 50 Years', Energy & Nano Technology Conference, Rice University, May 3, 2003.
[2] John F. Bookout (President of Shell USA) ,“Two Centuries of Fossil Fuel Energy”, International Geological Congress, Washington DC, July 10,1985. [3] Ron Swenson, “Peak Oil, Climate Recovery, and Renewable Energy ”, ASES July 2006, Thursday 10:30am to 12:00pm http://www.ecotopia.com/ASES/Solar2006/ Peak Oil Forum Peak Oil Forum [4] S. S. Sun and N. S. Sariciftci, Organic photovoltaics: mechanism, materials, and devices, pp. 4-17, vol. 99. CRC, 2005. [5] S. M. Sze, Semiconductor devices: physics and technology. Wiley-India, pp.330-340, 2009. [6] T. Markvart, “Photovoltaic solar energy conversion,” European Summer University: Energy for Europe, 2002. [7] 陳頤承, 郭昭顯, 陳悛亨, 太陽電池量測技術, 工業材料雜誌258期, 2008. [8] ASTM International, Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface, G 173-03, 2003. The data can be downloaded at.left angle bracket. http://rredc.nrel.gov/solar/spectra/am1.5/right-pointing angle bracket. [9] J. Nelson, The physics of solar cells. Imperial College Press London, 2003. [10] E. Becquerel. 'Mémoire sur les effets électriques produits sous l'influence des rayons solaires'. Comptes Rendus 9: 561–567. 1839 [11] D. M. Chapin, C. S. Fuller, and G. L. Pearson, “A New Silicon p-n Junction Photocell for Converting Solar Radiation into Electrical Power,” Journal of Applied Physics, vol. 25, no. 5, p. 676, 1954. [12] W. Shockley and H. J. Queisser, “Detailed Balance Limit of Efficiency of p-n Junction Solar Cells,” Journal of Applied Physics, vol. 32, p. 510, 1961. [13] K. A. Bertness, S. R. Kurtz, D. J. Friedman, A. E. Kibbler, C. Kramer, and J. M. Olson, “29.5%-efficient GaInP/GaAs tandem solar cells,” Applied physics letters, vol. 65, no. 8, pp. 989–991, 1994. [14] D. E. Carlson and C. R. Wronski, “Amorphous silicon solar cell,” Applied Physics Letters, vol. 28, no. 11, pp. 671–673, 1976. [15] S. R. Kurtz and N. R. E. L. (US), Opportunities and challenges for development of a mature concentrating photovoltaic power industry. National Renewable Energy Laboratory, 2009. [16] W. A. Little, “Possibility of synthesizing an organic superconductor,” Physical Review, vol. 134, no. 6, p. A1416–A1424, 1964. [17] C. K. Chiang et al., “Electrical Conductivity in Doped Polyacetylene,” Physical Review Letters, vol. 39, no. 17, p. 1098, Oct. 1977. [18] J. H. Burroughes et al., “Light-emitting diodes based on conjugated polymers,” Nature, vol. 347, no. 6293, pp. 539-541, Oct. 1990. [19] C. W. Tang, “Two-layer organic photovoltaic cell,” Applied Physics Letters, vol. 48, no. 2, pp. 183–185, 1986. [20] F. J. Kampas and M. Gouterman, “Porphyrin films. 3. Photovoltaic properties of octaethylporphine and tetraphenylporphine,” The Journal of Physical Chemistry, vol. 81, no. 8, pp. 690-695, Apr. 1977. [21] A. K. Ghosh, D. L. Morel, T. Feng, R. F. Shaw, and C. A. Rowe, “Photovoltaic and rectification properties of Al/Mg phthalocyanine/Ag Schottky-barrier cells,” Journal of Applied Physics, vol. 45, no. 1, p. 230, 1974. [22] C. J. Brabec, N. S. Sariciftci, J. C. Hummelen, and others, “Plastic solar cells,” Advanced Functional Materials, vol. 11, no. 1, pp. 15–26, 2001. [23] M. Theander et al., “Photoluminescence quenching at a polythiophene/C60 heterojunction,” Physical Review B, vol. 61, no. 19, p. 12957, May. 2000. [24] C. J. Brabec and S. N. Sariciftci, “Recent Developments in Conjugated Polymer Based Plastic Solar Cells,” Monatshefte fuer Chemie/Chemical Monthly, vol. 132, no. 4, pp. 421-431, Apr. 2001. [25] G. Yu, K. Pakbaz, and A. J. Heeger, “Semiconducting polymer diodes: Large size, low cost photodetectors with excellent visible-ultraviolet sensitivity,” Applied Physics Letters, vol. 64, no. 25, p. 3422, 1994. [26] G. Yu, J. Gao, J. C. Hummelen, F. Wudl, and A. J. Heeger, “Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor Heterojunctions,” Science, vol. 270, no. 5243, pp. 1789-1791, Dec. 1995. [27] S. E. Shaheen, C. J. Brabec, N. S. Sariciftci, F. Padinger, T. Fromherz, and J. C. Hummelen, “2.5% efficient organic plastic solar cells,” Applied Physics Letters, vol. 78, no. 6, p. 841, 2001. [28] C. J. Brabec, S. E. Shaheen, C. Winder, N. S. Sariciftci, and P. Denk, “Effect of LiF/metal electrodes on the performance of plastic solar cells,” Applied Physics Letters, vol. 80, no. 7, p. 1288, 2002. [29] P. Schilinsky, C. Waldauf, and C. J. Brabec, “Recombination and loss analysis in polythiophene based bulk heterojunction photodetectors,” Applied Physics Letters, vol. 81, no. 20, p. 3885, 2002. [30] G. Li, V. Shrotriya, Y. Yao, and Y. Yang, “Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene),” Journal of Applied Physics, vol. 98, no. 4, p. 043704, 2005. [31] W. Ma, C. Yang, X. Gong, K. Lee, and A. J. Heeger, “Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology,” Advanced Functional Materials, vol. 15, no. 10, pp. 1617–1622, 2005. [32] J. Y. Kim et al., “Efficient tandem polymer solar cells fabricated by all-solution processing,” Science, vol. 317, no. 5835, p. 222, 2007. [33] H.-Y. Chen et al., “Polymer solar cells with enhanced open-circuit voltage and efficiency,” Nat Photon, vol. 3, no. 11, pp. 649-653, Nov. 2009. [34] http://www.konarka.com/index.php/company/our-history/ [35] A. Moliton and J. M. Nunzi, “How to model the behaviour of organic photovoltaic cells,” Polymer international, vol. 55, no. 6, pp. 583–600, 2006. [36] M. C. Scharber et al., “Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency,” Advanced Materials, vol. 18, no. 6, pp. 789-794, Mar. 2006. [37] M. Jorgensen, K. Norrman, F.C. Krebs, Stability/degradation of polymer solar cells, Sol. Energy Mater. Sol. Cells 92 (2008) 686–714. [38] E. C. Chang, C. Chao, and R. Lee, “Enhancing the efficiency of MEH‐PPV and PCBM based polymer solar cells via optimization of device configuration and processing conditions,” Journal of Applied Polymer Science, vol. 101, no. 3, pp. 1919-1924, Aug. 2006. [39] G.-M. Ng, E. L. Kietzke, T. Kietzke, L.-W. Tan, P.-K. Liew, and F. Zhu, “Optical enhancement in semitransparent polymer photovoltaic cells,” Applied Physics Letters, vol. 90, no. 10, p. 103505, 2007. [40] C. J. Brabec, S. E. Shaheen, C. Winder, N. S. Sariciftci, and P. Denk, “Effect of LiF/metal electrodes on the performance of plastic solar cells,” Applied Physics Letters, vol. 80, no. 7, p. 1288, 2002. [41] K. Kawano and C. Adachi, “Reduced initial degradation of bulk heterojunction organic solar cells by incorporation of stacked fullerene and lithium fluoride interlayers,” Applied Physics Letters, vol. 96, no. 5, p. 053307, 2010. [42] M. P. de Jong, L. J. van IJzendoorn, and M. J. A. de Voigt, “Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes,” Applied Physics Letters, vol. 77, no. 14, p. 2255, 2000. [43] K. Kawano, R. Pacios, D. Poplavskyy, J. Nelson, D. D. C. Bradley, and J. R. Durrant, “Degradation of organic solar cells due to air exposure,” Solar Energy Materials and Solar Cells, vol. 90, no. 20, pp. 3520-3530, Dec. 2006. [44] S. E. Shaheen, M. S. White, D. C. Olson, N. Kopidakis, and D. S. Ginley, “Inverted bulk-heterojunction plastic solar cells.” [45] S. K. Hau, H.-L. Yip, N. S. Baek, J. Zou, K. O'Malley, A. K. Y. Jen, 'Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer', Applied Physics Letters [46] Jing-Shun Huang, Chen-Yu Chou, and Ching-Fuh Lin, “Efficient and air-stable polymer photovoltaic dev ices with WO3-V2O5 mixed oxides as anodic modification,” IEEE Electron Device Letters. Volume 31, Issue 4 , pp. 332-334, April 2010 [47] F. Zhang et al., “Recent development of the inverted configuration organic solar cells,” Solar Energy Materials and Solar Cells, vol. 95, no. 7, pp. 1785-1799, Jul. 2011. [48] Z. Xu et al., “Vertical Phase Separation in Poly(3‐hexylthiophene): Fullerene Derivative Blends and its Advantage for Inverted Structure Solar Cells,” Advanced Functional Materials, vol. 19, no. 8, pp. 1227-1234, Apr. 2009. [49] G. Li, V. Shrotriya, Y. Yao, and Y. Yang, “Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene),” Journal of Applied Physics, vol. 98, no. 4, p. 043704, 2005. [50] W. Ma, C. Yang, X. Gong, K. Lee, A. J. Heeger, 'Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology', Advanced Functional Materials 15, 2005, 1617-1622. [51] G. Li et al., “High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends,” Nature Materials, vol. 4, no. 11, pp. 864–868, 2005. [52] C.-W. Chu, H. Yang, W.-J. Hou, J. Huang, G. Li, and Y. Yang, “Control of the nanoscale crystallinity and phase separation in polymer solar cells,” Applied Physics Letters, vol. 92, no. 10, p. 103306, 2008. [53] C. Y. Chou, J. S. Huang, C. H. Wu, C. Y. Lee, and C. F. Lin, “Lengthening the polymer solidification time to improve the performance of polymer/ZnO nanorod hybrid solar cells,” Solar Energy Materials and Solar Cells, 2009. [54] S. E. Shaheen, C. J. Brabec, N. S. Sariciftci, F. Padinger, T. Fromherz, and J. C. Hummelen, “2.5% efficient organic plastic solar cells,” Applied Physics Letters, vol. 78, p. 841, 2001. [55] Y. Kim, S. A. Choulis, J. Nelson, D. D. C. Bradley, S. Cook, and J. R. Durrant, “Device annealing effect in organic solar cells with blends of regioregular poly(3-hexylthiophene) and soluble fullerene,” Applied Physics Letters, vol. 86, no. 6, p. 063502, 2005. [56] F. Zhang et al., “Influence of Solvent Mixing on the Morphology and Performance of Solar Cells Based on Polyfluorene Copolymer/Fullerene Blends,” Advanced Functional Materials, vol. 16, no. 5, pp. 667-674, Mar. 2006. [57] Y. Yao, J. Hou, Z. Xu, G. Li, Y. Yang, and S. E. Inc, “Effects of Solvent Mixtures on the Nanoscale Phase Separation in Polymer Solar Cells*,” AdV. Funct. Mater, vol. 18, pp. 1783–1789, 2008. [58] J. K. Lee et al., “Processing Additives for Improved Efficiency from Bulk Heterojunction Solar Cells,” Journal of the American Chemical Society, vol. 130, no. 11, pp. 3619-3623, Mar. 2008. [59] F.-C. Chen, H.-C. Tseng, and C.-J. Ko, “Solvent mixtures for improving device efficiency of polymer photovoltaic devices,” Applied Physics Letters, vol. 92, no. 10, pp. 103316-3, Mar. 2008. [60] Darin Laird 'plexcore OPV Technology: Efficiency, process, scaling, and reliablility' Dutch Solar cell R&D semniar 2008. (http://www.google.com.tw/url?sa=t&source=web&cd=1&ved=0CB0QFjAA&url=http%3A%2F%2Fwww.jointsolarpanel.nl%2Ffileadmin%2Fjointsolarpanel%2Fuser%2Fdocuments%2Fseminar2008%2F8_Plextronics_Darin_Laird.pdf&ei=OuMNTt3KCKPnmAWn0aWhDg&usg=AFQjCNEbOVG1yFp4XoQ9R0z6P7xetUyTOQ&sig2=WdvqXS9uuXsxJHexbpmFWg) [61] M. C. Scharber et al., “Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency,” Advanced Materials, vol. 18, no. 6, pp. 789-794, Mar. 2006. [62] R. Tipnis, D. Laird, 'Printing efficient solar cells', 15 December 2008, SPIE Newsroom (http://spie.org/x31682.xml?ArticleID=x31682) [63] F. Zhang et al., “Recent development of the inverted configuration organic solar cells,” Solar Energy Materials and Solar Cells, 2011. [64] Y. Kim et al., “A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells,” Nat Mater, vol. 5, no. 3, pp. 197-203, Mar. 2006. [65] R. S. Ruoff, D. S. Tse, R. Malhotra, and D. C. Lorents, “Solubility of fullerene (C60) in a variety of solvents,” The Journal of Physical Chemistry, vol. 97, no. 13, pp. 3379–3383, 1993. [66] V. D. Mihailetchi, H. X. Xie, B. de Boer, L. J. A. Koster, and P. W. M. Blom, “Charge Transport and Photocurrent Generation in Poly(3‐hexylthiophene): Methanofullerene Bulk‐Heterojunction Solar Cells,” Advanced Functional Materials, vol. 16, no. 5, pp. 699-708, Mar. 2006. [67] U. Zhokhavets, T. Erb, G. Gobsch, M. Al-Ibrahim, and O. Ambacher, “Relation between absorption and crystallinity of poly(3-hexylthiophene)/fullerene films for plastic solar cells,” Chemical Physics Letters, vol. 418, no. 4-6, pp. 347-350, Feb. 2006. [68] D. Chirvase, J. Parisi, J. C. Hummelen, and V. Dyakonov, “Influence of nanomorphology on the photovoltaic action of polymer–fullerene composites,” Nanotechnology, vol. 15, no. 9, pp. 1317-1323, Sep. 2004. [69] J. Y. Kim et al., “Efficient tandem polymer solar cells fabricated by all-solution processing,” Science, vol. 317, no. 5835, p. 222, 2007. [70] M.D. Irwin, D.B. Buchholz, A.W. Hains, R.P. Chang, and T.J. Marks, “p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells,” Proceedings of the National Academy of Sciences, vol. 105, 2008, p. 2783 [71] J. K. Lee et al., “Processing Additives for Improved Efficiency from Bulk Heterojunction Solar Cells,” Journal of the American Chemical Society, vol. 130, no. 11, pp. 3619-3623, Mar. 2008. [72] W. Ma, C. Yang, X. Gong, K. Lee, and A. J. Heeger, “Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology,” Advanced Functional Materials, vol. 15, no. 10, p. 1617–1622, 2005. [73] K. Kim, J. Liu, M. A. G. Namboothiry, and D. L. Carroll, “Roles of donor and acceptor nanodomains in 6% efficient thermally annealed polymer photovoltaics,” Applied Physics Letters, vol. 90, no. 16, p. 163511, 2007. [74] F. Zhang, W. Mammo, L. M. Andersson, S. Admassie, M. R. Andersson, and O. Inganäs, “Low‐Bandgap Alternating Fluorene Copolymer/Methanofullerene Heterojunctions in Efficient Near‐Infrared Polymer Solar Cells,” Advanced Materials, vol. 18, no. 16, pp. 2169-2173, Aug. 2006. [75] K. M. Coakley and M. D. McGehee, “Conjugated polymer photovoltaic cells,” Chemistry of materials, vol. 16, no. 23, pp. 4533–4542, 2004. [76] R. Kroon, M. Lenes, J. C. Hummelen, P. W. M. Blom, and B. de Boer, “Small bandgap polymers for organic solar cells (polymer material development in the last 5 years),” Polymer Reviews, vol. 48, no. 3, pp. 531–582, 2008. [77] F. Wang, J. Luo, K. Yang, J. Chen, F. Huang, and Y. Cao, “Conjugated Fluorene and Silole Copolymers: Synthesis, Characterization, Electronic Transition, Light Emission, Photovoltaic Cell, and Field Effect Hole Mobility,” Macromolecules, vol. 38, no. 6, pp. 2253-2260, Mar. 2005. [78] E. Bundgaard and F. C. Krebs, “Low band gap polymers for organic photovoltaics,” Solar energy materials and solar cells, vol. 91, no. 11, pp. 954–985, 2007. [79] N. Blouin, A. Michaud, and M. Leclerc, “A low-bandgap poly (2, 7-carbazole) derivative for use in high-performance solar cells,” Advanced Materials, vol. 19, no. 17, pp. 2295–2300, 2007. [80] S. H. Park, A. Roy, S. Beaupré, S. Cho, N. Coates, J. S. Moon, D. Moses, M. Leclerc, K. Lee, and A. J. Heeger, “Bulk heterojunction solar cells with internal quantum efficiency approaching 100&percnt,” Nature photonics, vol. 3, no. 5, pp. 297–302, 2009. [81] K. Kawano, R. Pacios, D. Poplavskyy, J. Nelson, D. D. C. Bradley, and J. R. Durrant, “Degradation of organic solar cells due to air exposure,” Solar Energy Materials and Solar Cells, vol. 90, no. 20, pp. 3520-3530, Dec. 2006. [82] S. K. Basu, A. M. Bergstreser, L. F. Francis, L. E. Scriven, and A. V. McCormick, “Wrinkling of a two-layer polymeric coating,” Journal of applied physics, vol. 98, p. 063507, 2005. [83] E. Voroshazi, B. Verreet, A. Buri, R. Müller, D. Di Nuzzo, and P. Heremans, “Influence of cathode oxidation via the hole extraction layer in polymer:fullerene solar cells,” Organic Electronics, vol. 12, no. 5, pp. 736-744, May. 2011. [84] S. J. Kwon, J. H. Park, and J. G. Park, “Wrinkling of a sol-gel-derived thin film,” Physical Review E, vol. 71, no. 1, p. 011604, 2005. [85] A. K. K. Kyaw, X. W. Sun, C. Y. Jiang, G. Q. Lo, D. W. Zhao, and D. L. Kwong, “An inverted organic solar cell employing a sol-gel derived ZnO electron selective layer and thermal evaporated MoO hole selective layer,” Applied Physics Letters, vol. 93, p. 221107, 2008. [86] N. Sekine, C. H. Chou, W. L. Kwan, and Y. Yang, “ZnO nano-ridge structure and its application in inverted polymer solar cell,” Organic Electronics, vol. 10, no. 8, pp. 1473–1477, 2009. [87] T. Y. Chu et al., “Highly efficient polycarbazole-based organic photovoltaic devices,” Applied Physics Letters, vol. 95, p. 063304, 2009. [88] S. J. Kwon, J. H. Park, and J. G. Park, “Wrinkling of a sol-gel-derived thin film,” Physical Review E, vol. 71, no. 1, p. 011604, 2005. [89] S. J. Kwon and J. G. Park, “Dewetting of a Sol-Gel-derived Thin Film,” Langmuir, vol. 22, no. 8, p. 3895–3898, 2006. [90] A. K. K. Kyaw, X. W. Sun, C. Y. Jiang, G. Q. Lo, D. W. Zhao, and D. L. Kwong, “An inverted organic solar cell employing a sol-gel derived ZnO electron selective layer and thermal evaporated MoO hole selective layer,” Applied Physics Letters, vol. 93, p. 221107, 2008. [91] I. J. Wang, S. C. Shiu, M. Y. Lin, J. S. Huang, Y. H. Lin, and C. F. Lin, “Improvement of inverted-type organic solar cells by mild oxygen plasma etching on polymer thin film,” Solar Energy Materials and Solar Cells, vol. 94, no. 10, pp. 1681–1685, 2010. [92] Y. Kim et al., “A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells,” Nat Mater, vol. 5, no. 3, pp. 197-203, Mar. 2006. [93] T. Ameri et al., “Fabrication, Optical Modeling, and Color Characterization of Semitransparent Bulk‐Heterojunction Organic Solar Cells in an Inverted Structure,” Advanced Functional Materials, vol. 20, no. 10, pp. 1592-1598, May. 2010. [94] C. Y. Chou, J. S. Huang, C. H. Wu, C. Y. Lee, and C. F. Lin, “Lengthening the polymer solidification time to improve the performance of polymer/ZnO nanorod hybrid solar cells,” Solar Energy Materials and Solar Cells, 2009. [95] S. N. Magonov, V. Elings, and M.-H. Whangbo, “Phase imaging and stiffness in tapping-mode atomic force microscopy,” Surface Science, vol. 375, no. 2-3, p. L385-L391, Apr. 1997. [96] S. S. Sheiko, “Imaging of Polymers Using Scanning Force Microscopy: From Superstructures to Individual Molecules,” in New Developments in Polymer Analytics II, vol. 151, M. Schmidt, Ed. Berlin, Heidelberg: Springer Berlin Heidelberg, 2000, pp. 61-174. [97] Q. H. Li, Q. Wan, Y. X. Liang, and T. H. Wang, “Electronic transport through individual ZnO nanowires,” Applied Physics Letters, vol. 84, no. 22, p. 4556, 2004. [98] Q. H. Li, Y. X. Liang, Q. Wan, and T. H. Wang, “Oxygen sensing characteristics of individual ZnO nanowire transistors,” Applied Physics Letters, vol. 85, no. 26, p. 6389, 2004. [99] W. J. E. Beek, M. M. Wienk, M. Kemerink, X. Yang, and R. A. J. Janssen, “Hybrid zinc oxide conjugated polymer bulk heterojunction solar cells,” The Journal of Physical Chemistry B, vol. 109, no. 19, pp. 9505–9516, 2005. [100] H.-Y. Chen et al., “Polymer solar cells with enhanced open-circuit voltage and efficiency,” Nat Photon, vol. 3, no. 11, pp. 649-653, Nov. 2009. [101] Y. Liang et al., “For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%,” Advanced Materials, vol. 22, no. 20, p. E135–E138, 2010. [102] T.-Y. Chu et al., “Bulk Heterojunction Solar Cells Using Thieno[3,4-c]pyrrole-4,6-dione and Dithieno[3,2-b:2′,3′-d]silole Copolymer with a Power Conversion Efficiency of 7.3%,” Journal of the American Chemical Society, vol. 133, no. 12, pp. 4250-4253, Mar. 2011. [103] S.-H. Chan et al., “Morphology Evolution of Spin-Coated Films of Poly(thiophene−phenylene−thiophene) and [6,6]-Phenyl-C71-butyric Acid Methyl Ester by Solvent Effect,” Macromolecules, vol. 43, no. 7, pp. 3399-3405, Apr. 2010. [104] D. Bao, H. Gu, and A. Kuang, “Sol-gel-derived c-axis oriented ZnO thin films,” Thin Solid Films, vol. 312, no. 1-2, pp. 37–39, 1998. [105] M. N. Kamalasanan and S. Chandra, “Sol-gel synthesis of ZnO thin films,” Thin Solid Films, vol. 288, no. 1-2, pp. 112–115, 1996. [106] Z. Yong et al., “Ti-doped ZnO Thin Films Prepared at Different Ambient Conditions: Electronic Structures and Magnetic Properties,” Materials, vol. 3, no. 6, pp. 3642–3653, 2010. [107] J. Wu, J. Xia, W. Lei, and B. Wang, “A one-step method to fabricate lotus leaves-like ZnO film,” Materials Letters, 2010. [108] B. B. Lakshmi, P. K. Dorhout, and C. R. Martin, “Sol-gel template synthesis of semiconductor nanostructures,” Chemistry of materials, vol. 9, no. 3, pp. 857–862, 1997. [109] Y. Gao and M. Nagai, “Morphology evolution of ZnO thin films from aqueous solutions and their application to solar cells,” Langmuir, vol. 22, no. 8, pp. 3936–3940, 2006. [110] S. J. Kwon and J. G. Park, “Theoretical analysis of growth of ZnO nanorods on the amorphous surfaces,” The Journal of chemical physics, vol. 122, p. 214714, 2005. [111] S. J. Kwon, J. H. Park, and J. G. Park, “Wrinkling of a sol-gel-derived thin film,” Physical Review E, vol. 71, no. 1, p. 011604, 2005. [112] S. K. Basu, A. M. Bergstreser, L. F. Francis, L. E. Scriven, and A. V. McCormick, “Wrinkling of a two-layer polymeric coating,” Journal of applied physics, vol. 98, p. 063507, 2005. [113] S. J. Kwon and J. G. Park, “Dewetting of a Sol-Gel-derived Thin Film,” Langmuir, vol. 22, no. 8, pp. 3895–3898, 2006. [114] L. E. Greene et al., “General route to vertical ZnO nanowire arrays using textured ZnO seeds,” NANO letters, vol. 5, no. 7, pp. 1231–1236, 2005. [115] S. Patra, S. Sarkar, S. K. Bera, R. Ghosh, and G. K. Paul, “Hydrophobic self-cleaning surfaces of ZnO thin films synthesized by sol–gel technique,” Journal of Physics D: Applied Physics, vol. 42, p. 075301, 2009. [116] H. H. Liao, L. M. Chen, Z. Xu, G. Li, and Y. Yang, “Highly efficient inverted polymer solar cell by low temperature annealing of Cs2CO3 interlayer,” Applied Physics Letters, vol. 92, no. 17, pp. 173303–173303, 2008. [117] N. Sekine, C. H. Chou, W. L. Kwan, and Y. Yang, “ZnO nano-ridge structure and its application in inverted polymer solar cell,” Organic Electronics, vol. 10, no. 8, pp. 1473–1477, 2009. [118] M. Ohyama, H. Kouzuka, and T. Yoko, “Sol-gel preparation of ZnO films with extremely preferred orientation along (002) plane from zinc acetate solution,” Thin Solid Films, vol. 306, no. 1, pp. 78-85, Aug. 1997. [119] D. Shi, X. C. Wang, Z. W. Yao, F. Liu, X. B. Zhang, and J. P. Cheng, “Wettability of porous two-dimensional ZnO nanocrystal films,” The Canadian Journal of Chemical Engineering. [120] Ren-De Sun, A. Nakajima, A. Fujishima, T. Watanabe, and K. Hashimoto, “Photoinduced Surface Wettability Conversion of ZnO and TiO2 Thin Films,” The Journal of Physical Chemistry B, vol. 105, no. 10, pp. 1984–1990, 2001. [121] V. R. Shinde, C. D. Lokhande, R. S. Mane, and S.-H. Han, “Hydrophobic and textured ZnO films deposited by chemical bath deposition: annealing effect,” Applied Surface Science, vol. 245, no. 1-4, pp. 407-413, May. 2005. [122] M. Ma and R. M. Hill, “Superhydrophobic surfaces,” Current Opinion in Colloid & Interface Science, vol. 11, no. 4, pp. 193-202, Oct. 2006. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/22243 | - |
dc.description.abstract | 人類在近年來將面對到的最大問題為能源短缺,由於石油藏量與日漸減,價格卻是不停上升,為了填補能源缺口,有多種可行的替代性能源成為各國研究的重點,太陽能幾乎取之不盡的特性,使得太陽能電池被視為能夠填補能源缺口的可行方案之一,而新發展的有機高分太陽能電池有別於以往的無機太陽能電池,能夠以低成本的方式製造,且質輕可撓曲、可大量製造的特性,能使太陽能電池應用的範圍更加廣泛。
然而目前有機太陽能電池的主要問題是效率偏低,而且元件在空氣下的壽命太短,本論文研究倒置結構的有機太陽能電池,由於使用氧化鋅和銀電極取代一般結構中易水解的PEDOT:PSS和易氧化的鋁電極,這種結構具有良好的空氣穩定性,有機太陽能電池的穩定性問題可經此結構解決。 論文中首先應用Plextcore® PV2000材料於空氣穩定的倒置結構,由於PV2000能夠比被廣泛研究的P3HT:PCBM系統提供更高的開路電壓,搭配溴萘添加的慢乾法,能促進高分子的結晶性,薄膜的吸收頻譜提升,能使短路電流由9.6mA/cm2提升到11.3 mA/cm2,效率也因此從3.96%提升到4.63%。實驗中證實適當添加溴萘慢乾法可以有效增加元件效率,並推測過多的添加使薄膜乾燥時間過長反而會產生反效果。 為了使有機層更能有效利用太陽光能,因此將有機材料更換為新型低能隙的PCDTBT材料,預估能夠多利用18%的太陽光。然而在實驗中發現,原先在P3HT:PCBM系統中能夠對元件有幫助的氧化鋅薄膜表面紋路,在搭配低能隙材料時,由於低能隙材料的理想薄厚小於80奈米,然而氧化鋅薄膜表面卻有90奈米高的山丘狀結構,因此氧化鋅表面紋路會穿透有機薄膜,造成元件中有大量的漏電流。若是更換溶劑及加入TiO2中介層可以有效改善這個問題,將開路電壓由0.36V恢復到0.66V,使倒置結構可以匹配低能隙材料。這個成果能夠使將來應用其它新型有機低能隙材料時,可以成功讓薄膜不會受到氧化鋅表面皺紋狀紋路的破壞。 由於氧化鋅表面形貌會影響低能隙材料的薄膜成長,因此在本論文也研究了改變氧化鋅薄膜退火環境對表面形貌的影響,發現在封閉無空氣流動的環境退火可以成長出較平坦的氧化鋅薄膜,這種平坦無皺紋狀紋路的氧化鋅薄膜,水接觸角量測為41.94°,比起具有皺紋狀紋路的接觸角為64.02°,較具有親水性,若經由UV光持續照射後會暫時性的提升親水性。然而已知基板具親水性不利於P3HT:PCBM元件的效率,因此在此建議若要搭配親油性的氧化鋅基板,可保留表面的紋路較佳。 | zh_TW |
dc.description.abstract | The humanity’s most important problem is the energy shortage. Due to the increasing oil price, several renewable energy sources are investigated to fill the energy requirement gap between demand and supply. Because solar energy is almost inexhaustible, solar cells become one of the most promising solutions for the energy issue. Organic solar cells (OSCs) are different from the previous inorganic solar cells. Since OSCs are low-cost, flexible and mass producible, it can promote the application of solar cells to more general usage.
The most important problem of organic solar cells is the lower power conversion efficiency and the air-stable life time. By replacing the hydrolysis PEDOT:PSS and easily oxidized Al with ZnO and Ag, the inverted structure has great air stability. Hence, the life time issue of organic solar cells could be eliminated by the air stable inverted structure. At first, the Plextcore® PV2000 was applied to the inverted structure to providing higher Voc than P3HT:PCBM system. Cooperating with the Br-naph doping in solvent, the polymer layer achieved better crystallization and higher absorption. As a result, the Jsc increased from 9.6mA/cm2 to 11.3 mA/cm2, and the PCE(power conversion efficiency) was improved from 3.96% to 4.63%. In this experiment, the doping Br-naph to length the drying-time of active layer is effective to enhance the device efficiency, yet the excess doping may show some counter effect. To efficiently take advantage of long wavelength region photons, the low band gap polymer, PCDTBT, was used to further absorb 18% sun light. However, the ridge ZnO surface, which was helpful in the previous P3HT:PCBM system, lead to some negative effect. The wrinkled ZnO ridge was 90nm height while the polymer film was just less than 80nm. The ZnO ridge consequently penetrated the polymer thin film and cause the leakage current in device. Applying different solvent and TiO2 interlayer can reduce the ZnO penetration, and the Voc recovered from 0.36V to 0.66V, so the inverted structure can match the thin film low band gap material. This result can provide a route to match the air stable inverted structure to new developed low band gap polymer, getting rid of the wrinkled ZnO surface. Since the surface morphology strongly affects the developing process of organic thin film on ZnO surface, the different annealing environment was investigate to find out the surface morphology. The closed oven without air flow produce plane ZnO thin film and the contact angle of the plane ZnO is 41.94°, lower than the rough one 64.02°. After continuous UV illumination, the contact angle was further decreasing, indicating the more hydrophilic surface. However, the hydrophilic surface is not preferred for P3HT:PCBM. The result suggests that the rough wrinkled ZnO surface can provide for hydrophobic polymer layer. | en |
dc.description.provenance | Made available in DSpace on 2021-06-08T04:14:16Z (GMT). No. of bitstreams: 1 ntu-100-R98941030-1.pdf: 7154429 bytes, checksum: fcf2474c13db2063d01abc167fdd099d (MD5) Previous issue date: 2011 | en |
dc.description.tableofcontents | 口試委員審定書 I
致謝 II 摘要 III Abstract V 目錄 VII 圖表目錄 IX 第一章 緒論 1 1.1 簡介 1 1.2 太陽光能介紹 4 1.3 太陽能電池的發展 7 1.4 有機太陽能電池的發展 9 1.4.1單層有機太陽能電池 10 1.4.2雙層結構有機太陽能電池 11 1.4.3本體異質接面結構有機太陽能電池 14 1.5 參考資料 18 第二章 有機太陽能電池原理及結構 23 2.1 等效電路模型與元件分析方法 23 2.2 實驗中元件所使用的倒置結構(inverted structure) 26 2.3 參考資料 27 第三章 使用溴萘添加慢乾法提升效率 30 3.1 實驗目的 30 3.2 倒置結構PV2000太陽能電池製備 33 3.2.1元件的材料準備及介紹 33 3.2.2元件的製備流程: 35 3.3 溴萘添加慢乾法對於元件特性之影響 37 3.4 元件AFM分析 41 3.5 吸收頻譜分析 42 3.6 在PV2000中使用溴萘慢乾法中加入金屬氧化物中介層 44 3.6.1實驗目的 44 3.6.2實驗製程 46 3.6.3加入氧化鎳中介層後溴萘慢乾法元件的效率 47 3.7 結論 49 3.8 參考資料 49 第四章 氧化鋅基板對於有機薄膜的影響 53 4.1 實驗目的 53 4.2 實驗流程 55 4.2.1元件的材料準備及介紹 55 4.2.2元件的製備流程: 57 4.3 氧化鋅基板對奈米級薄膜太陽能電池的不良影響與解決方法 60 4.4 有機薄膜AFM表面分析 61 4.5 氧化鋅穿透有機薄膜對元件表現的影響 65 4.5.1氧化鋅穿透對元件持續照射紫外光的影響 65 4.5.2氧化鋅穿透對於元件各項參數的影響 68 4.6 結論 69 4.7 參考資料 70 第五章 溶液-凝膠法氧化鋅薄膜成長與表面形貌 75 5.1 實驗目的 75 5.2 改變氧化鋅薄膜的成長環境實驗 76 5.2.1實驗流程 76 5.2.2氧化鋅薄膜表面觀察 77 5.2.3水滴接觸角觀察 79 5.3 元件與氧化鋅基板皺紋狀起伏分析 83 5.4 結論 85 5.5 參考資料 86 第六章 未來展望 89 6.1 總結論 89 6.2 未來可行的方向與展望 90 | |
dc.language.iso | zh-TW | |
dc.title | 倒置高分子太陽能電池之薄膜形態對元件特性的影響 | zh_TW |
dc.title | The Influence of Thin Film Morphology on the Device Characteristics of Inverted Polymer Solar Cells | en |
dc.type | Thesis | |
dc.date.schoolyear | 99-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 林唯芳,吳志毅,陳奕君 | |
dc.subject.keyword | 有機太陽能電池,氧化鋅薄膜,皺紋狀紋路,慢乾,親水性,倒置結構, | zh_TW |
dc.subject.keyword | organic solar cells,ZnO thin film,wrinkled surface,slow-drying,hydrophilic,inverted structure, | en |
dc.relation.page | 93 | |
dc.rights.note | 未授權 | |
dc.date.accepted | 2011-08-18 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 光電工程學研究所 | zh_TW |
顯示於系所單位: | 光電工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-100-1.pdf 目前未授權公開取用 | 6.99 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。