請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/21577
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 楊哲人(Jen-Ren Yang) | |
dc.contributor.author | Pin-Jung Chen | en |
dc.contributor.author | 陳品戎 | zh_TW |
dc.date.accessioned | 2021-06-08T03:38:32Z | - |
dc.date.copyright | 2019-07-25 | |
dc.date.issued | 2019 | |
dc.date.submitted | 2019-07-17 | |
dc.identifier.citation | [1] B. Cantor, I.T.H. Chang, P. Knight, A.J.B. Vincent, Microstructural development in equiatomic multicomponent alloys, Materials Science and Engineering: A 375-377 (2004) 213-218.
[2] S.-K.C. Jien-Wei Yeh, Su-Jien Lin, Jon-Yiew Gan, Tsung-Shune Chin, Tao-Tsung Shun, Chun-Huei Tsau, and Shou-Yi Chang, Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes, Advanced Engineering Materials (2004). [3] F. Otto, A. Dlouhý, C. Somsen, H. Bei, G. Eggeler, E.P. George, The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy, Acta Materialia 61(15) (2013) 5743-5755. [4] D.B. Miracle, O.N. Senkov, A critical review of high entropy alloys and related concepts, Acta Materialia 122 (2017) 448-511. [5] M. Beyramali Kivy, M. Asle Zaeem, Generalized stacking fault energies, ductilities, and twinnabilities of CoCrFeNi-based face-centered cubic high entropy alloys, Scripta Materialia 139 (2017) 83-86. [6] F. Otto, Y. Yang, H. Bei, E.P. George, Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys, Acta Materialia 61(7) (2013) 2628-2638. [7] C.-J. Tong, Y.-L. Chen, J.-W. Yeh, S.-J. Lin, S.-K. Chen, T.-T. Shun, C.-H. Tsau, S.-Y. Chang, Microstructure characterization of AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements, Metallurgical and Materials Transactions A 36(4) (2005) 881-893. [8] C.-Y. Hsu, J.-W. Yeh, S.-K. Chen, T.-T. Shun, Wear resistance and high-temperature compression strength of Fcc CuCoNiCrAl0.5Fe alloy with boron addition, Metallurgical and Materials Transactions A 35(5) (2004) 1465-1469. [9] O.N. Senkov, G.B. Wilks, J.M. Scott, D.B. Miracle, Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys, Intermetallics 19(5) (2011) 698-706. [10] O.N. Senkov, G.B. Wilks, D.B. Miracle, C.P. Chuang, P.K. Liaw, Refractory high-entropy alloys, Intermetallics 18(9) (2010) 1758-1765. [11] O.N. Senkov, J.M. Scott, S.V. Senkova, F. Meisenkothen, D.B. Miracle, C.F. Woodward, Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy, Journal of Materials Science 47(9) (2012) 4062-4074. [12] O.N. Senkov, J.M. Scott, S.V. Senkova, D.B. Miracle, C.F. Woodward, Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy, Journal of Alloys and Compounds 509(20) (2011) 6043-6048. [13] Y. Zhang, T.T. Zuo, Z. Tang, M.C. Gao, K.A. Dahmen, P.K. Liaw, Z.P. Lu, Microstructures and properties of high-entropy alloys, Progress in Materials Science 61 (2014) 1-93. [14] J.-W. Yeh, Recent progress in high-entropy alloys, European Journal of Control - EUR J CONTROL 31 (2006) 633-648. [15] J.-W. Yeh, Alloy Design Strategies and Future Trends in High-Entropy Alloys, Jom 65(12) (2013) 1759-1771. [16] C. Varvenne, A. Luque, W.A. Curtin, Theory of strengthening in fcc high entropy alloys, Acta Materialia 118 (2016) 164-176. [17] R.S. Mishra, N. Kumar, M. Komarasamy, Lattice strain framework for plastic deformation in complex concentrated alloys including high entropy alloys, Materials Science and Technology 31(10) (2015) 1259-1263. [18] N. Kumar, Y. Qiu, X. Nie, R. Mishra, Z. Tang, P. Liaw, R. Brennan, K. Doherty, K. Cho, High Strain-Rate Compressive Deformation Behavior of the Al0.1CrFeCoNi High Entropy Alloy, 2015. [19] B. Hammer, K.W. Jacobsen, V. Milman, M.C. Payne, Stacking fault energies in aluminium, Journal of Physics: Condensed Matter 4(50) (1992) 10453-10460. [20] C.B. Carter, S.M. Holmes, The stacking-fault energy of nickel, The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics 35(5) (1977) 1161-1172. [21] A. Zaddach, C. Niu, C.C. Koch, D. L. Irving, Mechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy, JOM: the journal of the Minerals, Metals & Materials Society2013. [22] Z. Wu, H. Bei, F. Otto, G.M. Pharr, E.P. George, Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys, Intermetallics 46 (2014) 131-140. [23] Z. Wu, H. Bei, G.M. Pharr, E.P. George, Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures, Acta Materialia 81 (2014) 428-441. [24] A. Gali, E.P. George, Tensile properties of high- and medium-entropy alloys, Intermetallics 39 (2013) 74-78. [25] A.J. Zaddach, R.O. Scattergood, C.C. Koch, Tensile properties of low-stacking fault energy high-entropy alloys, Materials Science and Engineering: A 636 (2015) 373-378. [26] G. Laplanche, A. Kostka, C. Reinhart, J. Hunfeld, G. Eggeler, E.P. George, Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi, Acta Materialia 128 (2017) 292-303. [27] Z. Li, K.G. Pradeep, Y. Deng, D. Raabe, C.C. Tasan, Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off, Nature 534 (2016) 227-30. [28] D. Wei, X. Li, J. Jiang, W. Heng, Y. Koizumi, W.-M. Choi, B.-J. Lee, H.S. Kim, H. Kato, A. Chiba, Novel Co-rich high performance twinning-induced plasticity (TWIP) and transformation-induced plasticity (TRIP) high-entropy alloys, Scripta Materialia 165 (2019) 39-43. [29] G. Laplanche, A. Kostka, O.M. Horst, G. Eggeler, E.P. George, Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy, Acta Materialia 118 (2016) 152-163. [30] U.S. Lindholm, High strain rate tests, Measurement of mechanical properties vol. 5 (1971) 199-271. [31] J.M. Park, J. Moon, J.W. Bae, M.J. Jang, J. Park, S. Lee, H.S. Kim, Strain rate effects of dynamic compressive deformation on mechanical properties and microstructure of CoCrFeMnNi high-entropy alloy, Materials Science and Engineering: A 719 (2018) 155-163. [32] J.D. Campbell, W.G. Ferguson, The temperature and strain-rate dependence of the shear strength of mild steel, Philosophical Magazine 21(169) (2006) 63-82. [33] M. Meyers, Dynamic Behavior of materials, JohnWiley and Sons1994. [34] Z. Li, S. Zhao, S.M. Alotaibi, Y. Liu, B. Wang, M.A. Meyers, Adiabatic shear localization in the CrMnFeCoNi high-entropy alloy, Acta Materialia 151 (2018) 424-431. [35] M. Staker, The relation between adiabatic shear instability strain and material properties, 1981. [36] M.A. Meyers, V.F. Nesterenko, J.C. LaSalvia, Q. Xue, Shear localization in dynamic deformation of materials: microstructural evolution and self-organization, Materials Science and Engineering: A 317(1) (2001) 204-225. [37] J. He, Q. Wang, H. Zhang, L. Dai, T. Mukai, Y. Wu, X. Liu, H. Wang, T.-G. Nieh, Z. Lu, Dynamic deformation behavior of a face-centered cubic FeCoNiCrMn high-entropy alloy, Science Bulletin 63(6) (2018) 362-368. [38] S.-P. Tsai, Y.-T. Tsai, Y.-W. Chen, P.-J. Chen, P.-H. Chiu, C.-Y. Chen, W.-S. Lee, J.-W. Yeh, J.-R. Yang, High-entropy CoCrFeMnNi alloy subjected to high-strain-rate compressive deformation, Materials Characterization 147 (2019) 193-198. [39] S. Zherebtsov, N. Stepanov, Y. Ivanisenko, D. Shaysultanov, N. Yurchenko, M. Klimova, G. Salishchev, Evolution of Microstructure and Mechanical Properties of a CoCrFeMnNi High-Entropy Alloy during High-Pressure Torsion at Room and Cryogenic Temperatures, Metals 8(2) (2018). [40] J. Moon, Y. Qi, E. Tabachnikova, Y. Estrin, W.M. Choi, S.H. Joo, B.J. Lee, A. Podolskiy, M. Tikhonovsky, H.S. Kim, Microstructure and Mechanical Properties of High-Entropy Alloy Co20Cr26Fe20Mn20Ni14 Processed by High-Pressure Torsion at 77 K and 300 K, Sci Rep 8(1) (2018) 11074. [41] Y.T. Zhu, X.Z. Liao, X.L. Wu, Deformation twinning in nanocrystalline materials, Progress in Materials Science 57(1) (2012) 1-62. [42] H. Gleiter, The formation of annealing twins, Acta Metallurgica 17 (1969). [43] N.B. S. Dash, An investigate of the origin and growth of annealing twins Aacta Metallurgica 11 (1963). [44] L.E.M. M. A. Meyers, A model for the formaton of annealing twins in FCC metals and alloys, Acta Metallurgica 26 (1978). [45] C.S.P. S. Mahjan, M. A. Imam, B. B. Rath, Formation of annealing twins in f.c.c. crystals, Acta Metallurgica 45 (1997) 2633-2638. [46] J.A. Venables, Deformation twinning in face-centred cubic metals, 6(63) (1961) 379-396 %J Philosophical Magazine. [47] M.S. Christian JW, Deformation twinning, Progress in Materials Science 39 (1995). [48] B.C. De Cooman, Y. Estrin, S.K. Kim, Twinning-induced plasticity (TWIP) steels, Acta Materialia 142 (2018) 283-362. [49] T.H. Blewitt, R.R. Coltman, J.K. Redman, Low‐Temperature Deformation of Copper Single Crystals, Journal of Applied Physics 28(6) (1957) 651-660. [50] E. El-Danaf, S.R. Kalidindi, R.D. Doherty, Influence of grain size and stacking-fault energy on deformation twinning in fcc metals, Metallurgical and Materials Transactions A 30(5) (1999) 1223-1233. [51] M.A. Meyers, U.R. Andrade, A.H. Chokshi, The effect of grain size on the high-strain, high-strain-rate behavior of copper, Metallurgical and Materials Transactions A 26(11) (1995) 2881-2893. [52] X.Z. Liao, Y.H. Zhao, Y.T. Zhu, R.Z. Valiev, D.V. Gunderov, Grain-size effect on the deformation mechanisms of nanostructured copper processed by high-pressure torsion, Journal of Applied Physics 96(1) (2004) 636-640. [53] Z. Li, S. Zhao, H. Diao, P.K. Liaw, M.A. Meyers, High-velocity deformation of Al(0.3)CoCrFeNi high-entropy alloy: Remarkable resistance to shear failure, Scientific reports 7 (2017) 42742-42742. [54] Y. Ma, F. Yuan, M. Yang, P. Jiang, E. Ma, X. Wu, Dynamic shear deformation of a CrCoNi medium-entropy alloy with heterogeneous grain structures, Acta Materialia 148 (2018) 407-418. [55] W. Wu, M. Song, S. Ni, J. Wang, Y. Liu, B. Liu, X. Liao, Dual mechanisms of grain refinement in a FeCoCrNi high-entropy alloy processed by high-pressure torsion, Sci Rep 7 (2017) 46720. [56] L. Hsin-Yi, Studies on nanostructure for annealing twin in α-brass and transformation twin in high-carbonic martensite, Department of Materials Science and Engineering, National Taiwan University, 2010. [57] Y.-T. Tsai, Y.-W. Chen, J.-R. Yang, Severe deformation of nanostructured bainitic steel, Procedia Engineering 207 (2017) 1862-1867. [58] Y.T. Tsai, C.R. Lin, W.S. Lee, C.Y. Huang, J.R. Yang, Mechanical behavior and microstructural evolution of nanostructured bainite under high-strain rate deformation by Hopkinson bar, Scripta Materialia 115 (2016) 46-51. [59] Q. Fang, F. Sansoz, Influence of intrinsic kink-like defects on screw dislocation – coherent twin boundary interactions in copper, Acta Materialia 123 (2017) 383-393. [60] S. Allain, J.P. Chateau, O. Bouaziz, S. Migot, N. Guelton, Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe–Mn–C alloys, Materials Science and Engineering: A 387-389 (2004) 158-162. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/21577 | - |
dc.description.abstract | 高熵合金作為金屬領域新興材料,近幾年來受到廣泛關注,又以FeCoNiCrMn(或被稱作Cantor alloy)作為最多人研究的系統之一。根據文獻報導,在低溫拉伸實驗中,具有低疊差能之面心立方單相結構FeCoNiCrMn高熵合金會生成大量機械雙晶,雙晶除了能有效阻擋差排移動亦可促使晶粒細化之效用,增加材料之加工硬化率、強度與延展性等機械性能。
本研究藉由霍普金森快速撞擊試驗機,在不同溫度(25℃、-50℃、-100℃、-150℃)和不同應變速率(4000 s-1、9000 s-1)對兩種晶粒尺寸(4.3 μm、45.9 μm)的FeCoNiCrMn高熵合金執行壓縮變形實驗,並透過背向散射電子繞射技術與穿透式電子顯微鏡探討機械性能與顯微結構變化之影響。 實驗結果之應力應變曲線指出,隨著實驗溫度降低或是應變速率提高,材料強度皆會上升,因為提升應變速率和降低溫度有著相同的效果,皆能促使機械雙晶提早形成、提高材料加工硬化率。機械雙晶臨界剪應力亦依循著Hall-Petch理論趨勢,會隨著晶粒縮小而增加,使大晶粒(45 μm)整體強度比小晶粒(4.3 μm)更高。主要透過TEM分析材料內微結構發展,依照變形理論以及TEM結果推論,在變形初期仍以差排為主,隨著差排堆積、糾結使應力快速上升,達到啟動雙晶所需的臨界應力值,單一變體雙晶開始在基地中成核。實驗結果顯示不論在哪個應變速率或溫度,都可以觀察到機械雙晶,且隨著溫度降低雙晶帶的寬度也會增加。除此之外,結構內也觀測到兩組雙晶並存的現象,可分為基地中的Primary twin和Secondary twin、退火雙晶內的機械雙晶以及機械雙晶內的機械雙晶,晚出現的機械雙晶會將原晶粒再次分割,達到晶粒細化的效果也使材料強度增強。本研究亦利用高解析穿透式電子顯微鏡與快速傅立葉轉換圖譜,分析奈米級機械雙晶交互作用情形。 | zh_TW |
dc.description.abstract | High entropy alloys are a new type of material in metal field, which have caught a lot of attention in recent years, and FeCoNiCrMn (or named as Cantor alloys) are one of the most studied system. According to published paper, FeCoNiCrMn high entropy alloys with low stacking fault energy and FCC single phase structure generated numerous deformation twins during cryogenic tensile test. Besides blocked dislocation movement, deformation twins also had grain refinement effect, which provided a higher work hardening rate and better mechanical properties.
This experiment took two grain size (4.3μm、45.9μm) FeCoNiCrMn high entropy alloys as material and performed compression test at various temperature (25℃、-50℃、-100C、-150℃) and strain rate (4000 s-1、9000 s-1) by Split-Hopkinson pressure bar, and investigated mechanical properties and microstructure development in material by Electron Back-Scattered Diffraction and Transmission Electron Microscopy. The results of stress strain curve indicated that stress increased with the decrease of temperature and the increase of the strain rate, because they have same effect in promoting deformation twin development and increasing work hardening rate. The critical resolved shear stress of twinning also followed classic Hall-Petch theory and increased with the decrease of grain size, thus large grain (45 μm) had higher stress than small grain (4.3 μm). Based on deformation theory and experimental results from TEM, it could infer that dislocation slip was main deformation mechanism in the beginning, dislocation accumulation and tangle raised stress quickly and reached critical resolved shear stress of twinning, after then single variant twinning started nucleation in matrix. The results indicated that no matter which temperature or strain rate, deformation twin always appeared, and the thickness of twin band increased with the decrease of temperature. Additionally, there were two variant deformation twins in material which could be classify into three types, first was primary and secondary in matrix, second was deformation twin inside the annealing twin, third was deformation twin inside the deformation twin, the latter one divided the original grain into smaller size which achieved the effect of grain refinement and material strengthening. Finally, this work tried to analyze intersection position between deformation twins through high resolution TEM and fast Fourier transformation. | en |
dc.description.provenance | Made available in DSpace on 2021-06-08T03:38:32Z (GMT). No. of bitstreams: 1 ntu-108-R06527008-1.pdf: 12755736 bytes, checksum: 497e5f5e5fb94ca775b2bd39b71a7ec5 (MD5) Previous issue date: 2019 | en |
dc.description.tableofcontents | 致謝 i
中文摘要 ii ABSTRACT iii 目錄 v LIST OF FIGURES viii LIST OF TABLES xiv LIST OF EQUATIONS xv 第1章 前言 1 第2章 文獻回顧 2 2.1 高熵合金 2 2.1.1 高熵合金簡介 2 2.1.2 高熵合金之定義以及其四大效應 3 2.1.3 FeCoNiCrMn高熵合金與其拉伸性質 6 2.2 快速變形實驗 9 2.2.1 塑性變形之機械測試類別 9 2.2.2 快速形變材料行為特性 11 2.2.3 理論溫升量與絕熱條件 13 2.3 雙晶與塑性變形 16 2.3.1 雙晶介紹 16 2.3.2 退火雙晶與機械雙晶 19 2.3.3 機械雙晶的影響因素 20 第3章 實驗設計及步驟 24 3.1 實驗流程 24 3.1.1 實驗材料 25 3.1.2 軋延及熱處理 26 3.1.3 快速撞擊實驗 29 3.2 實驗儀器與設備 30 3.2.1 霍普金森桿 (Split Hopkinson Pressure Bar) 30 3.2.2 X光繞射分析 (X-ray diffraction analysis, XRD) 31 3.2.3 電子背向散射繞射儀 (Electron Back-Scattered Diffraction, EBSD) 31 3.2.4 穿透式電子顯微鏡 (Transmission Electron Microscope) 32 第4章 結果與討論 34 4.1 高熵合金低溫快速撞擊之機械性質 34 4.1.1 真實應力應變曲線 34 4.1.2 理論溫升量 40 4.1.3 X光繞射儀 43 4.1.4 電子背向散射繞射 45 4.2 高熵合金低溫快速撞擊之穿透式顯微鏡分析 51 4.2.1 變形前之微結構分析 51 4.2.2 溫度、應變速率及晶粒大小對機械性質之影響 53 4.2.3 差排及雙晶微結構之形貌觀察 61 4.2.4 高解析電子顯微鏡 72 第5章 結論 76 第6章 未來工作 77 附錄 78 REFERENCES 85 | |
dc.language.iso | zh-TW | |
dc.title | FeCoNiCrMn高熵合金低溫快速撞擊實驗之機械性質與顯微結構研究 | zh_TW |
dc.title | Mechanical Property and Microstructure of Cryogenic Temperature and High-stain-rate Compressive Deformation in the FeCoNiCrMn High-entropy Alloy | en |
dc.type | Thesis | |
dc.date.schoolyear | 107-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 李勝隆,薛承輝,王樂民,陳志遠 | |
dc.subject.keyword | FeCoNiCrMn高熵合金,霍普金森快速撞擊,高應變速率,極低溫,機械雙晶, | zh_TW |
dc.subject.keyword | FeCoNiCrMn high entropy alloys,Split Hopkinson Pressure Bar,High strain rate,cryogenic temperature,Deformation twin, | en |
dc.relation.page | 88 | |
dc.identifier.doi | 10.6342/NTU201901279 | |
dc.rights.note | 未授權 | |
dc.date.accepted | 2019-07-17 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-108-1.pdf 目前未授權公開取用 | 12.46 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。