請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/21536
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 薛承輝(Chun-Hway Hsueh) | |
dc.contributor.author | Pei-Yu Chen | en |
dc.contributor.author | 陳貝瑜 | zh_TW |
dc.date.accessioned | 2021-06-08T03:37:09Z | - |
dc.date.copyright | 2019-08-02 | |
dc.date.issued | 2019 | |
dc.date.submitted | 2019-07-23 | |
dc.identifier.citation | [1] B. Cantor, I.T.H. Chang, P. Knight, A.J.B. Vincent, Microstructural development in equiatomic multicomponent alloys, Materials Science and Engineering: A 375-377 (2004) 213-218.
[2] D.B. Miracle, O.N. Senkov, A critical review of high entropy alloys and related concepts, Acta Materialia 122 (2017) 448-511. [3] M.-H. Tsai, J.-W. Yeh, High-Entropy Alloys: A Critical Review, Materials Research Letters 2(3) (2014) 107-123. [4] J.P. Couzinié, G. Dirras, L. Perrière, T. Chauveau, E. Leroy, Y. Champion, I. Guillot, Microstructure of a near-equimolar refractory high-entropy alloy, Materials Letters 126 (2014) 285-287. [5] B. Gludovatz, E.P. George, R.O. Ritchie, Processing, Microstructure and Mechanical Properties of the CrMnFeCoNi High-Entropy Alloy, Jom 67(10) (2015) 2262-2270. [6] J.J. Licavoli, M.C. Gao, J.S. Sears, P.D. Jablonski, J.A. Hawk, Microstructure and Mechanical Behavior of High-Entropy Alloys, Journal of Materials Engineering and Performance 24(10) (2015) 3685-3698. [7] Y. Zhang, T.T. Zuo, Z. Tang, M.C. Gao, K.A. Dahmen, P.K. Liaw, Z.P. Lu, Microstructures and properties of high-entropy alloys, Progress in Materials Science 61 (2014) 1-93. [8] J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, S.Y. Chang, Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes, Advanced Engineering Materials 6(5) (2004) 299-303. [9] W. Abuzaid, H. Sehitoglu, Critical resolved shear stress for slip and twin nucleation in single crystalline FeNiCoCrMn high entropy alloy, Materials Characterization 129 (2017) 288-299. [10] W.G. Nohring, W.A. Curtin, Cross-slip of long dislocations in FCC solid solutions, Acta Materialia 158 (2018) 95-117. [11] I.V. Kireeva, Y.I. Chumlyakov, Z.V. Pobedennaya, A.V. Vyrodova, I.V. Kuksgauzen, D.A. Kuksgauzen, Orientation and temperature dependence of a planar slip and twinning in single crystals of Al0.3CoCrFeNi high-entropy alloy, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 737 (2018) 47-60. [12] Q.Y. Lin, J.P. Liu, X.H. An, H. Wang, Y. Zhang, X.Z. Liao, Cryogenic-deformation-induced phase transformation in an FeCoCrNi high-entropy alloy, Materials Research Letters 6(4) (2018) 236-243. [13] N. Stepanov, M. Tikhonovsky, N. Yurchenko, D. Zyabkin, M. Klimova, S. Zherebtsov, A. Efimov, G. Salishchev, Effect of cryo-deformation on structure and properties of CoCrFeNiMn high-entropy alloy, Intermetallics 59 (2015) 8-17. [14] A.J. Zaddach, R.O. Scattergood, C.C. Koch, Tensile properties of low-stacking fault energy high-entropy alloys, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 636 (2015) 373-378. [15] W.D. Li, P.K. Liaw, Y.F. Gao, Fracture resistance of high entropy alloys: A review, Intermetallics 99 (2018) 69-83. [16] N.D. Stepanov, D.G. Shaysultanov, G.A. Salishchev, M.A. Tikhonovsky, E.E. Oleynik, A.S. Tortika, O.N. Senkov, Effect of V content on microstructure and mechanical properties of the CoCrFeMnNiVx high entropy alloys, Journal of Alloys and Compounds 628 (2015) 170-185. [17] W.R. Wang, J.Q. Wang, H.G. Yi, W. Qi, Q. Peng, Effect of Molybdenum Additives on Corrosion Behavior of (CoCrFeNi)(100-x)Mo-x High-Entropy Alloys, Entropy 20(12) (2018). [18] Y.X. Zhuang, X.L. Zhang, X.Y. Gu, Effect of molybdenum on phases, microstructure and mechanical properties of Al0.5CoCrFeMoxNi high entropy alloys, Journal of Alloys and Compounds 743 (2018) 514-522. [19] W.D. Du, N. Liu, Z. Peng, P.J. Zhou, H.F. Xiang, X.J. Wang, The effect of Ti addition on phase selection of CoCrCu0.5FeNi high-entropy alloys, Materials Science and Technology 34(4) (2017) 473-479. [20] L.T.H. de Jeer, V. Ocelik, J.T.M. De Hosson, Orientation Relationships in Al0.7CoCrFeNi High-Entropy Alloy, Microscopy and Microanalysis 23(5) (2017) 905-915. [21] I.S. Wani, T. Bhattacharjee, S. Sheikh, I.T. Clark, M.H. Park, T. Okawa, S. Guo, P.P. Bhattacharjee, N. Tsuji, Cold-rolling and recrystallization textures of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy, Intermetallics 84 (2017) 42-51. [22] J.X. Hou, M. Zhang, S.G. Ma, P.K. Liaw, Y. Zhang, J.W. Qiao, Strengthening in Al0.25CoCrFeNi high-entropy alloys by cold rolling, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 707 (2017) 593-601. [23] Z.W. Zhang, C.T. Liu, M.K. Miller, X.L. Wang, Y.R. Wen, T. Fujita, A. Hirata, M.W. Chen, G. Chen, B.A. Chin, A nanoscale co-precipitation approach for property enhancement of Fe-base alloys, Scientific Reports 3 (2013). [24] B. Cantor, Multicomponent and High Entropy Alloys, Entropy 16(9) (2014) 4749-4768. [25] P. Li, B.M. Zhou, Y.Z. Zhou, J.G. Li, T. Jin, X.F. Sun, Z.F. Zhang, Effect of orientations on in situ tensile deformation and fracture behaviours of nickel-base single-crystal superalloys, Philosophical Magazine 94(21) (2014) 2426-2446. [26] B. Cantor, I.T.H. Chang, P. Knight, A.J.B. Vincent, Microstructural development in equiatomic multicomponent alloys, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 375 (2004) 213-218. [27] Y.F. Ye, Q. Wang, J. Lu, C.T. Liu, Y. Yang, High-entropy alloy: challenges and prospects, Materials Today 19(6) (2016) 349-362. [28] M.C. Gao, P. Liaw, J.-W. Yeh, Y. Zhang, High-entropy alloys: Fundamentals and applications, 2016. [29] A. Takeuchi, A. Inoue, Quantitative evaluation of critical cooling rate for metallic glasses, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 304 (2001) 446-451. [30] M.H. Tsai, J.W. Yeh, High-Entropy Alloys: A Critical Review, Materials Research Letters 2(3) (2014) 107-123. [31] A. Takeuchi, A. Inoue, Classification of Bulk Metallic Glasses by Atomic Size Difference, Heat of Mixing and Period of Constituent Elements and Its Application to Characterization of the Main Alloying Element, MATERIALS TRANSACTIONS 46(12) (2005) 2817-2829. [32] X. Yang, Y. Zhang, Prediction of high-entropy stabilized solid-solution in multi-component alloys, Materials Chemistry and Physics 132(2-3) (2012) 233-238. [33] S. Guo, C.T. Liu, Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase, Progress in Natural Science: Materials International 21(6) (2011) 433-446. [34] J.W. Yeh, Alloy Design Strategies and Future Trends in High-Entropy Alloys, Jom 65(12) (2013) 1759-1771. [35] F. Otto, Y. Yang, H. Bei, E.P. George, Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys, Acta Materialia 61(7) (2013) 2628-2638. [36] L.M. Martyushev, The maximum entropy production principle: two basic questions, Philosophical Transactions of the Royal Society B-Biological Sciences 365(1545) (2010) 1333-1334. [37] F. Körmann, Y. Ikeda, B. Grabowski, M.H.F. Sluiter, Phonon broadening in high entropy alloys, npj Computational Materials 3(1) (2017) 36. [38] Y. Zhang, X. Yang, P.K. Liaw, Alloy Design and Properties Optimization of High-Entropy Alloys, Jom 64(7) (2012) 830-838. [39] Y. J. Zhou, Y. Zhang, Y. L. Wang, G. L. Chen, Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties, 2007. [40] Y. Zhang, Y. Zhou, X. Hui, M. Wang, G. Chen, Minor alloying behavior in bulk metallic glasses and high-entropy alloys, 2008. [41] J.W. Yeh, S.K. Chen, J.Y. Gan, S.J. Lin, T.S. Chin, T.T. Shun, C.H. Tsau, S.Y. Chang, Formation of simple crystal structures in Cu-Co-Ni-Cr-Al-Fe-Ti-V alloys with multiprincipal metallic elements, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 35 A(8) (2004) 2533-2536. [42] K.-H. Cheng, C.-H. Lai, S.-J. Lin, J.-W. Yeh, Recent progress in multi-element alloy and nitride coatings sputtered from high-entropy alloy targets, 2006. [43] J.-W. Yeh, S.-J. Lin, T.-S. Chin, J.-Y. Gan, P.-H. Lee, T.-T. Shun, C.-H. Tsau, S.-Y. Chou, Formation of simple crystal structures in Cu-Co-Ni-Cr-Al-Fe-Ti-V alloys with multiprincipal metallic elements, 2004. [44] C.-J. Tong, Y.-L. Chen, J.-W. Yeh, S.-J. Lin, S.-K. Chen, T.-T. Shun, C.-H. Tsau, S.-Y. Chang, Microstructure characterization of AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements, Metallurgical and Materials Transactions A 36(4) (2005) 881-893. [45] M.H. Tsai, H. Yuan, G.M. Cheng, W.Z. Xu, K.Y. Tsai, C.W. Tsai, W.W.W. Jian, C.C. Juan, W.J. Shen, M.H. Chuang, J.W. Yeh, Y.T.T. Zhu, Morphology, structure and composition of precipitates in Al0.3CoCrCu0.5FeNi high-entropy alloy, Intermetallics 32 (2013) 329-336. [46] C. Tsai, M. Tsai, J.-W. Yeh, Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys, 2013. [47] Y. Zhang, microstructures and properties of high entropy alloys, 2014. [48] O.N. Senkov, J.M. Scott, S.V. Senkova, F. Meisenkothen, D.B. Miracle, C.F. Woodward, Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy, Journal of Materials Science 47(9) (2012) 4062-4074. [49] O.N. Senkov, J.M. Scott, S.V. Senkova, D.B. Miracle, C.F. Woodward, Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy, Journal of Alloys and Compounds 509(20) (2011) 6043-6048. [50] M. Klimova, N. Stepanov, D. Shaysultanov, R. Chernichenko, N. Yurchenko, V. Sanin, S. Zherebtsov, Microstructure and Mechanical Properties Evolution of the Al, C-Containing CoCrFeNiMn-Type High-Entropy Alloy during Cold Rolling, Materials (Basel, Switzerland) 11(1) (2017) 53. [51] X.F. Wang, Y. Zhang, Y. Qiao, G.L. Chen, Novel microstructure and properties of multicomponent CoCrCuFeNiTix alloys, Intermetallics 15(3) (2007) 357-362. [52] N. Prasad, N. Bibhanshu, N. Nayan, G.S. Avadhani, S. Suwas, Hot deformation behavior of the high-entropy alloy CoCuFeMnNi, Journal of Materials Research 34(5) (2019) 744-755. [53] Y. Guo, L. Liu, Y. Zhang, J.G. Qi, B. Wang, Z.F. Zhao, J. Shang, J. Xiang, A superfine eutectic microstructure and the mechanical properties of CoCrFeNiMox high-entropy alloys, Journal of Materials Research 33(19) (2018) 3258-3265. [54] W.H. Liu, Z.P. Lu, J.Y. He, J.H. Luan, Z.J. Wang, B. Liu, Y. Liu, M.W. Chen, C.T. Liu, Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases, Acta Materialia 116 (2016) 332-342. [55] C. Varvenne, W.A. Curtin, Strengthening of high entropy alloys by dilute solute additions: CoCrFeNiAlx and CoCrFeNiMnAlx alloys, Scripta Materialia 138 (2017) 92-95. [56] J.M. Wu, S.J. Lin, J.W. Yeh, S.K. Chen, Y.S. Huang, Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum content, Wear 261(5-6) (2006) 513-519. [57] J.-W. Yeh, Y.-L. Chen, S. Jien Lin, P.-H. Lee, High-Entropy Alloys – A New Era of Exploitation, 2007. [58] C.-C. Tung, J.-W. Yeh, T.-t. Shun, S.-K. Chen, Y.-S. Huang, H.-C. Chen, On the elemental effect of AlCoCrCuFeNi high-entropy alloy system, Materials Letters 61(1) (2007) 1-5. [59] C.-J. Tong, M.-R. Chen, J.-W. Yeh, S.-J. Lin, S.-K. Chen, T.-T. Shun, S.-Y. Chang, Mechanical performance of the AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements, Metallurgical and Materials Transactions A 36(5) (2005) 1263-1271. [60] W.-R. Wang, W.-L. Wang, S.-C. Wang, Y.-C. Tsai, C.-H. Lai, J.-W. Yeh, Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys, Intermetallics 26 (2012) 44-51. [61] H.-Y. Chen, C.-W. Tsai, C.-C. Tung, J.-W. Yeh, T.-T. Shun, C.-C. Yang, P.-H. Lee, Effect of the substitution of Co by Mn in Al-Cr-Cu-Fe-Co-Ni high-entropy alloys, 2006. [62] Y.J. Zhou, Y. Zhang, T.N. Kim, G.L. Chen, Microstructure characterizations and strengthening mechanism of multi-principal component AlCoCrFeNiTi0.5 solid solution alloy with excellent mechanical properties, Materials Letters 62(17) (2008) 2673-2676. [63] Y.J. Zhou, Y. Zhang, Y.L. Wang, G.L. Chen, Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties, Applied Physics Letters 90(18) (2007). [64] M.-R. Chen, S.-J. Lin, J.-W. Yeh, M.-H. Chuang, S.-K. Chen, Y.-S. Huang, Effect of vanadium addition on the microstructure, hardness, and wear resistance of Al0.5CoCrCuFeNi high-entropy alloy, Metallurgical and Materials Transactions A 37(5) (2006) 1363-1369. [65] G. Qin, R. Chen, H. Zheng, H. Fang, L. Wang, Y. Su, J. Guo, H. Fu, Strengthening FCC-CoCrFeMnNi high entropy alloys by Mo addition, Journal of Materials Science & Technology 35(4) (2019) 578-583. [66] S.G. Ma, Y. Zhang, Effect of Nb addition on the microstructure and properties of AlCoCrFeNi high-entropy alloy, Materials Science and Engineering: A 532 (2012) 480-486. [67] K. Cho, Y. Fujioka, T. Nagase, H.Y. Yasuda, Grain refinement of non-equiatomic Cr-rich CoCrFeMnNi high-entropy alloys through combination of cold rolling and precipitation of sigma phase, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 735 (2018) 191-200. [68] S.J. Sun, Y.Z. Tian, H.R. Lin, X.G. Dong, Y.H. Wang, Z.J. Zhang, Z.F. Zhang, Enhanced strength and ductility of bulk CoCrFeMnNi high entropy alloy having fully recrystallized ultrafine-grained structure, Materials & Design 133 (2017) 122-127. [69] G.D. Sathiaraj, W. Skrotzki, A. Pukenas, R. Schaarschuch, R.J. Immanuel, S.K. Panigrahi, J.A. Chelvane, S.S.S. Kumar, Effect of annealing on the microstructure and texture of cold rolled CrCoNi medium-entropy alloy, Intermetallics 101 (2018) 87-98. [70] S.J. Sun, Y.Z. Tian, H.R. Lin, H.J. Yang, X.G. Dong, Y.H. Wang, Z.F. Zhang, Transition of twinning behavior in CoCrFeMnNi high entropy alloy with grain refinement, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 712 (2018) 603-607. [71] P.P. Bhattacharjee, G.D. Sathiaraj, M. Zaid, J.R. Gatti, C. Lee, C.W. Tsai, J.W. Yeh, Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy, Journal of Alloys and Compounds 587 (2014) 544-552. [72] T. Guo, J.S. Li, J. Wang, W.Y. Wang, Y. Liu, X.M. Luo, H.C. Kou, E. Beaugnon, Microstructure and properties of bulk Al0.5CoCrFeNi high-entropy alloy by cold rolling and subsequent annealing, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 729 (2018) 141-148. [73] N.D. Stepanov, D.G. Shaysultanov, N.Y. Yurchenko, S.V. Zherebtsov, A.N. Ladygin, G.A. Salishchev, M.A. Tikhonovsky, High temperature deformation behavior and dynamic recrystallization in CoCrFeNiMn high entropy alloy, Materials Science and Engineering: A 636 (2015) 188-195. [74] J.X. Hou, M. Zhang, H.J. Yang, J.W. Qiao, Deformation Behavior of Al0.25CoCrFeNi High-Entropy Alloy after Recrystallization, Metals 7(4) (2017). [75] Z.H. Han, S. Liang, J. Yang, R. Wei, C.J. Zhang, A superior combination of strength-ductility in CoCrFeNiMn high-entropy alloy induced by asymmetric rolling and subsequent annealing treatment, Materials Characterization 145 (2018) 619-626. [76] P. Lohmuller, L. Peltier, A. Hazotte, J. Zollinger, P. Laheurte, E. Fleury, Variations of the Elastic Properties of the CoCrFeMnNi High Entropy Alloy Deformed by Groove Cold Rolling, Materials 11(8) (2018). [77] M.F. Doerner, W.D. Nix, A method for interpreting the data from depth-sensing indentation instruments, Journal of Materials Research 1(4) (1986) 601-609. [78] ASTM International. ASTM E112-12 Standard Test Methods for Determining Average Grain Size, ASTM International: West Conshohocken, USA, 2012. [79] W.C. Oliver, G.M. Pharr, Nanoindentation in materials research: Past, present, and future, Mrs Bulletin 35(11) (2011) 897-907. [80] S. Singh, N. Wanderka, B.S. Murty, U. Glatzel, J. Banhart, Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy, Acta Materialia 59(1) (2011) 182-190. [81] T.-T. Shun, L.-Y. Chang, M.-H. Shiu, Microstructures and mechanical properties of multiprincipal component CoCrFeNiTix alloys, Materials Science and Engineering: A 556 (2012) 170-174. [82] L. Zhang, Y. Zhou, X. Jin, X.Y. Du, B.S. Li, The microstructure and high-temperature properties of novel nano precipitation-hardened face centered cubic high-entropy superalloys, Scripta Materialia 146 (2018) 226-230. [83] J.Y. He, H. Wang, H.L. Huang, X.D. Xu, M.W. Chen, Y. Wu, X.J. Liu, T.G. Nieh, K. An, Z.P. Lu, A precipitation-hardened high-entropy alloy with outstanding tensile properties, Acta Materialia 102 (2016) 187-196. [84] Ueber die Berührung fester elastischer Körper, Journal für die reine und angewandte Mathematik (Crelle's Journal), 1882, p. 156. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/21536 | - |
dc.description.abstract | 金屬材料相關研究在材料科學領域中發展悠久,且普遍應用於人類生活中。然而,傳統以單一元素為主元素的金屬材料已缺乏大幅度突破,並面臨材料設計瓶頸。高熵合金於2004年提出之後,即受到各界學者關注,其特殊的機械性質以及元素組成為金屬材料的發展打開嶄新的研究領域。在諸多高熵合金中,Cantor合金(組成為CoCrFeMnNi)廣被諸多學者研究,該合金具有優異的低溫機械性能與斷裂韌性,然而,其在室溫下的強度還需進一步提升,以滿足更多工業應用的基本要求。本研究以電弧熔煉技術製備CoCrFeMnNi高熵合金塊材,並添加不同含量的Ti,合金設計為CoCrFeMnNiTix (x = 0, 0.2及0.5,x為莫耳比),觀察 Ti 元素含量的變化對合金之微結構、硬度及拉伸性質的影響;合金並進行冷軋和退火再結晶處理,分析塊材在不同退火溫度下其微結構對機械性質的影響。利用光學顯微鏡 (OM)、電子顯微鏡 (SEM) 觀察塊材顯微組織,電子背向散射繞射分析儀 (EBSD) 探討材料晶粒大小與結晶取向,X光繞射分析儀 (XRD) 進行相分析,同時藉由奈米壓痕試驗分析材料微觀機械行為,並進行拉伸試驗研究材料巨觀機械性質。研究結果顯示,在1173 K下退火可使高熵合金具有極佳的延展性,而添加Ti的高熵合金在x=0.2時,其最大拉伸強度可達到1087 MPa。 | zh_TW |
dc.description.abstract | High entropy alloys (HEAs) with a face-centered cubic structure have recently received significant attentions due to their outstanding ductility and fracture toughness. In this study, the effects of Ti addition on the microstructures and mechanical properties of CoCrFeMnNi were investigated systematically. Three CoCrFeMnNiTix (x=0, 0.2 and 0.5 in molar ratio) HEAs were prepared by arc melting and studied in as-cast and annealed condition, respectively. It was found that Ti additions in HEAs led to the formation of intermetallic phases and increased the hardness. While Ti0.5 was embrittled due to the presence of hard intermetallic phases, the Ti0 and Ti0.2 ingots were then reduced in thickness of 80% by cold rolling and annealed for 1 h at two annealing temperatures, 1073 and 1173 K. The microstructure evolution, crystallographic texture, hardness and tensile properties were studied. The Ti0 alloy exhibited a single-phase FCC solid solution, while (Cr, Fe)-rich sigma phase and (Co, Ni)3Ti Laves phase precipitated in the Ti0.2 alloy after annealing. With precipitation of the hard yet brittle sigma phase and Laves phase, the yield strength of Ti0.2 alloy increased significantly but with the sacrifice in the tensile elongation. Both grain boundary strengthening and precipitation strengthening were the main strengthening mechanisms of the alloy doped with the Ti element. | en |
dc.description.provenance | Made available in DSpace on 2021-06-08T03:37:09Z (GMT). No. of bitstreams: 1 ntu-108-R06527035-1.pdf: 3473111 bytes, checksum: 8a8698522ca024ae646646a4b0cd1bbb (MD5) Previous issue date: 2019 | en |
dc.description.tableofcontents | 誌謝 i
中文摘要 iii ABSTRACT iv CONTENTS v LIST OF FIGURES vii LIST OF TABLES x Chapter 1 Introduction 1 Chapter 2 Literature Review 3 2.1 Motivation and birth of High Entropy alloy 3 2.2 Four-core effects of High-entropy alloy 4 2.2.1 High-entropy Effect 5 2.2.2 Severe Lattice Distortion Effect 8 2.2.3 Sluggish Diffusion Effect 10 2.2.4 Cocktail Effect 11 2.3 Mechanical behavior of High entropy alloy 13 2.3.1 Effect of alloying elements 14 2.3.2 Effect of processing methods 21 2.4 Nanoindentation 23 Chapter 3 Experimental Procedure 27 3.1 Materials and Preparation 27 3.2 Scanning Electron Microscope (SEM) 28 3.3 X-ray diffractometer (XRD) 28 3.4 Electron backscatter diffraction (EBSD) 29 3.5 Nanoindentation 29 3.6 Tensile Test 29 Chapter 4 Results and Discussions 30 4.1 Composition 30 4.2 XRD Results 30 4.3 Microstructure and Texture 33 4.4 Nanoindentation 46 4.5 Tensile Test and Fractography 49 Chapter 5 Conclusions 54 References 55 | |
dc.language.iso | en | |
dc.title | Ti對於CoCrFeMnNi高熵合金塊材微結構與機械性質之影響 | zh_TW |
dc.title | Effects of Ti addition on the microstructure and mechanical properties of CoCrFeMnNi high-entropy alloy | en |
dc.type | Thesis | |
dc.date.schoolyear | 107-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 楊哲人(Jer-Ren Yang),陳士勛(Shih-Hsun Chen) | |
dc.subject.keyword | 高熵合金,微結構,機械性質, | zh_TW |
dc.subject.keyword | high entropy alloy,microstructure,mechanical properties, | en |
dc.relation.page | 61 | |
dc.identifier.doi | 10.6342/NTU201901844 | |
dc.rights.note | 未授權 | |
dc.date.accepted | 2019-07-23 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-108-1.pdf 目前未授權公開取用 | 3.39 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。