請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/20174
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 林法勤 | |
dc.contributor.author | Tzu-Chien Peng | en |
dc.contributor.author | 彭子謙 | zh_TW |
dc.date.accessioned | 2021-06-08T02:41:29Z | - |
dc.date.copyright | 2018-03-02 | |
dc.date.issued | 2018 | |
dc.date.submitted | 2018-02-09 | |
dc.identifier.citation | 林務局 (2015) 第四次臺灣森林資源及土地利用調查結果。
王松永 (1983) 商用木材。中華民國林產事業協會印行。 王松永、丁昭義 (1984) 林產學 (上冊),臺灣商務印書館。 周坤池 (2008) 不同竹種竹炭與竹醋液之製造與碳才於水質改良之應用。國立中興大學森林所碩士學位論文。 呂錦明 (2001) 竹林之培育及經營管理。行政院農委會林業試驗所。林業叢刊第135號,204頁。 林俊成、林裕仁、邱祈榮 (2014) 10年來臺灣竹材利用市場統計。林業研究專刊 21:39-42。 邱祈榮、陳財輝、林裕仁、楊鄢如、林欣德 (2009) 臺灣北部地區竹林資源分布及變遷之研究。中華林學季刊 42:89-105。 馬子斌、翟思湧、王紹萊、黃清吟、陳欣欣 (1980) 層竹家具製造技術進一步改進之研究。林業試驗所試驗報告第 329 號。 張上鎮、王升陽、蘇裕昌 (1993) 與木材光變色有關之抽出成分的反應機制及其防止方法之探討。中華林學季刊 26:113-125。 翟思湧 (1989) 層竹家具之製造。林產工業 8 (4):98-111。 廖坤福 (1997) 木材物理學。中興大學教務處出版組。 劉正字、李文昭、王恩華 (1992) 竹木材積層膠合製作高級製品及結構建材(Ⅰ)竹材基本物理機械性質及膠合性之探討。林產工業 11 (1):19-29。 Alexopoulos, J. (1989) Effect of resin content on creep and other properitys on waferboard. Thesis. Faculty of Forestry, University of Toronto, Toronto, Ontario, Canada. Andersson, S., R. Serimaa, T. Paakkari, P. Saranpaa, E. Pesonen (2003) Crystallinity ofwood and the size of cellulose crystallites in Norway spruce (Picea abies). Journal of Wood Science 49: 531-537. Aoyagi, S. and T. Nakano (2009) Effect of longitudinal and radial posi- tion on creep forbamboo. Journal of the Society of Materials Science, Japan 58: 57-61. Bengtsson, C. (2001) “Short-term” mechano-sorptive creep of well-defined spruce timber. Holz Roh-Werkstoff 59:117-128. Eckelman, C. A. (2003) Load considerations in furniture design. pp.3-18 In A. E. Carl, ed. Textbook of Product Engineering and Strength Design of Furniture. West Lafayette,Indiana. 202pp. Espiloy, Z. (1987) Physico-mechanical properties and anatomical relationships of some Philippine bamboos. In: A. N. Rao et al. eds. Recent research on bamboo. Gottron, J., H. A. Kent, and X. Qingfeng. (2014) Creep behaviour of bamboo. Construction and Building Materials 66: 79-88. Grosser D., W. Liese ( 1971) On the anatomy of Asian bamboos, with special reference to their vascular bundles. Wood Sci Technol 5:290–312. Inokuchi, Y., M. Fushitani, T. Kubo, K. Sato (2002) Effect of volume fraction of bundlesheath and water extractives on bending creep behavior of bamboo under changing moisture conditions. Mokuzai Gakkaishi 48: 413-424 (in Japanese). Janssen, J. (1981) Bamboo in building structures. Doctoral thesis. Nether lands: Eindhoven University of Technology. Kishen, J., D. P. Ghosh, and M. A. Rehman (1956) Studies on moisture content, shrinkage, swelling and intersection point of mature (Dendrocalamus strictus) male bamboo. Indian Foresty Recreation 1: 1-30. Kanzawa, E, S. Aoyagi, T. Nakano (2011) Vascular bundle shape in cross-section and relaxation properties of Moso bamboo (Phyllostachys pubescens). Material Science and Engineering: C 31(5): 1050-1054. Lee, C. H., M. J. Chung, C. H. Lin and T. H. Yang (2012) Effects of layered structure on the physical and mechanical properties of laminated moso bamboo (Phyllosachys edulis) flooring. Construction and Building Materials 28: 31 – 35. Liese, W. and F. R. G. Hamburg (1987) Research on bamboo. Wood Science Technology 21: 189-209. Lu, J. P. and R. H. Leicester (1997) Mechano-sorptive effects on timber creep. Wood Sci.Technol.31: 331-337. McClure, F. A. (1966) The bamboos: a fresh perspective. Harvard University Press, Combridge, Mass. Minemura, N. and K. Umehara (1979) Color improvement of wood I. (in Japanese) Rept. Hokkaido For. Res. Inst. 68: 92-145. Narayanmurti, D. and B. S. Bist (1947) Preliminary studies on building boards from bamboos. Indian Forestry Leaflet No.103. Pritchard, J., M.P. Ansell, R.J.H. Thompson, and P.W. Bonfield (2001) Effect of two relative humidity environments on the performance properties of MDF, OSB and chipboard. Part1:MOR , MOE and fatigue life performance. Wood Sci. Technol. 35: 395-403. Sattar, M. A., M. F. Kabir and D. K. Battacharjee (1994) Effect of age and height position on muli (Melocanna baccifera) and borak (Bambusa balcooa) bamboos on their physical and mechanical properties. In Bamboo in Asia and the Pacific. Proceedings of the 4th International bamboo Workshop, Chiangmai, Thailand, 27-30 November, 1991. pp. 183-187. Scurlock, J. M. O., Dayton, D. C. ,and Hames, B. (2000) Bamboo: an over-look biomass resource. Biomass and Bioenergy 19: 229-244. Smith I, Landis E, Gong M. (2003) Fracture and fatigue in wood. West Sussex, UK: John Wiley and Sons Ltd. Tsubaki, T. and N. Takato (2010) Creep behavior of bamboo under various desorption conditions. Holzforschung 64: 489-493. Xu, Q., K. A. Harries, X. Li, Q. Lui, J. Gottron (2014) Mechanical properties of structural bamboo following immersion in water. Engineering Structures 2014. Li, Xiaobo. (2004) Physical, chemical, and mechanical properties of bamboo and its utilization potential for fireboard manufacturing. In: The School of Renewable Natural Resources. Faculty of the Louisiana State University and Agriculture and Mechanical College. 68pp. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/20174 | - |
dc.description.abstract | 日益嚴峻的地球環境,使得近年來人類對於環保材料有了高度的重視,竹材是一種收穫期短、質量輕盈卻又具有極佳機械強度的天然材料,有很好的開發潛力。圖書館家具因為使用頻繁,常因耐用性而設計成較為厚重的形式。辜振甫紀念圖書館則是全球第一個以竹集成材為內部家具的設計,以往並無先例。為了解此種材料作為圖書館家具的耐用程度,進行了潛變、裂縫及色差三項監測。
潛變是針對86座書架,逾7000個書格中藏書超過一半的樣本量測其中點的垂直變位,長期追蹤其變形狀況。色差則針對環繞圖書館四周的閱覽桌,以色差計量測其顏色,並以CIELab的色階公式計算其顏色變化。裂縫則以3688片集成板上手指可辨的裂縫為對象,記錄其發生次數、長度以及位置。 結果顯示出書櫃確實有發生潛變的狀況,但是量測顯示潛變狀況並不嚴重,即使是最明顯的潛變書格,其潛變量仍在安全範圍內。色差部分則發現位於圖書館南側的閱覽桌有較明顯的顏色變化,應該和圖書館中窗簾下放的時間有關,因遮蔽的時段不同有所差異。裂縫的量測則發現,無論是數量或長度裂縫都持續增加,且裂縫有幾處明顯好發的位置,其位置通常出現在集成材的膠合部或是與書櫃層板的榫接處接近,應是由於膠和強度不足以及應力集中的效應所造成。 綜合上述,可發現竹集成材確實可以做為圖書館家具。謹慎選用材料,加強家具的設計,在合適的使用環境下,可增強其耐用性。相信在未來的家具及建築內裝上竹材或竹集成材將有更大的開發潛力。 | zh_TW |
dc.description.provenance | Made available in DSpace on 2021-06-08T02:41:29Z (GMT). No. of bitstreams: 1 ntu-107-R00625044-1.pdf: 2820360 bytes, checksum: 36014c92067c904e322c2ebfe4ed0997 (MD5) Previous issue date: 2018 | en |
dc.description.tableofcontents | 謝誌 i
摘要 ii Abstract iii 圖目錄 vii 表目錄 xii 第1章 前言 1 第2章 文獻回顧 3 2.1 竹材 3 2.1.1 孟宗竹機械性質 6 2.2 潛變 9 2.3 影響竹材潛變之因素 11 2.4 竹材表面之顏色變化 13 第3章 材料與方法 14 3.1 實驗架構 14 3.2 實驗場地簡介 15 3.3 圖書館書櫃及閱覽桌之規格及製造工法 16 3.4 潛變監測方法 22 3.4.1 取樣對象 22 3.4.2 樣本分類 22 3.4.3 潛變量測 22 3.4.4 圖書館整體書櫃潛變監測 23 3.4.5 書櫃固定載重潛變實驗 24 3.4.6 書櫃最大荷重潛變實驗 24 3.5 書櫃裂縫監測方法 25 3.5.1 裂縫監測取樣對象與分類 25 3.5.2 裂縫量測方法 26 3.6 閱覽桌色差監測方法 27 3.6.1 色差監測取樣對象與分類 27 3.6.2 色差量測方法 27 3.6.3 光源測定 28 第4章 結果與討論 29 4.1 潛變 29 4.1.1 書櫃整體之潛變數據 29 4.1.2 模擬固定載重長期載重試驗 38 4.1.3 最大荷重長期潛變試驗 44 4.2 色差 46 4.2.2 色差監測數據結果 48 4.3 裂縫 54 4.3.1 整體裂縫結果 54 4.3.2 裂縫發生位置 61 第5章 結論 65 第6章 參考文獻 67 | |
dc.language.iso | zh-TW | |
dc.title | 竹集成材家具使用性能評估 | zh_TW |
dc.title | Evaluation of Practical Performance of Forniture
Made with Bamboo-Laminated Lumber | en |
dc.type | Thesis | |
dc.date.schoolyear | 106-1 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 張豐承,葉仲基,羅盛峰 | |
dc.subject.keyword | 書架,竹集成材,潛變,色差, | zh_TW |
dc.subject.keyword | Bookshelf,Bamboo-Laminated Lumber,Creep,Color Difference, | en |
dc.relation.page | 70 | |
dc.identifier.doi | 10.6342/NTU201800431 | |
dc.rights.note | 未授權 | |
dc.date.accepted | 2018-02-09 | |
dc.contributor.author-college | 生物資源暨農學院 | zh_TW |
dc.contributor.author-dept | 森林環境暨資源學研究所 | zh_TW |
顯示於系所單位: | 森林環境暨資源學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-107-1.pdf 目前未授權公開取用 | 2.75 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。