請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/19840
標題: | 高靈敏度石墨烯應變感測器之研究 Graphene Strain Sensor with High Sensitivity |
作者: | Shih-Chun Kuo 郭士俊 |
指導教授: | 張所鋐(Shuo-Hung Chang) |
關鍵字: | 石墨烯,應變,應變感測器,應變規因子,化學氣相沉積法, graphene,strain,strain sensor,gauge factor,chemical vapor deposition, |
出版年 : | 2015 |
學位: | 碩士 |
摘要: | 本研究利用化學氣相沉積法(CVD)成長雙層石墨烯,轉印在手機保護貼上製作單片石墨烯應變感測器。之後,將兩片石墨烯重疊轉印在手機保護貼上製作雙片石墨烯應變感測器,並利用精密移動平台在轉印過程中控制兩片石墨烯在手機保護貼上重疊的距離,以控制實驗參數。我們將石墨烯應變感測器置於可彎曲基板上,給予一端位移使基板彎曲產生應變,利用應變規量出石墨烯應變感測器黏貼處的應變,最後利用安捷倫半導體分析儀做其電阻之量測。
根據電阻量測結果,對石墨烯應變感測器施加應變後,改變了石墨烯的有效傳輸距離,其電阻值也隨之改變,正應變越大其電阻也變得越大。而應變感測器的靈敏度可由應變規因子(gage factor)觀察,本研究得出的gage factor也有隨著起始電阻變大而增加的趨勢。並且在相同面積下,本研究利用重疊兩片石墨烯,製作出靈敏度較只有一片石墨烯高的應變感測器。 In this work, bi-layer graphene is grown by CVD and then transferred to mobile phone protective film to produce single graphene film strain sensor. Later on, another graphene is transferred to mobile phone protective film to produce double graphene films strain sensor. The important variable, overlapping length of two graphene layers, is controlled by transferring process on micro precision stage. Graphene strain sensors are placed on a bendable substrate and a fixed displacement is applied on one edge of the substrate. The strain where sensors are placed and resistance are measured by strain gauge and digital multimeter separately. Based on measurement results, resistance and effective transmission length change when the strain is applied so the resistance gets larger by increasing the strain. The sensitivity of strain sensors is determined by gauge factor. In this work, the relationship between resistance and gage factor is monotonic. In addition, double-film strain sensors have higher sensitivity than single-film strain sensors do. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/19840 |
全文授權: | 未授權 |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-104-1.pdf 目前未授權公開取用 | 6.09 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。