請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/18679
標題: | 多輸入熱電能量獵取系統 A Multi-Input Thermoelectric Energy Harvesting System |
作者: | Chia-Lun Chang 張家綸 |
指導教授: | 李泰成 |
關鍵字: | 能量擷取,多重輸入單一輸出功率轉換器,熱電能量產生器,電感器共享, Energy harvesting,multi-input single output (MISO) power converter,thermoelectric generator,inductor sharing, |
出版年 : | 2014 |
學位: | 碩士 |
摘要: | 本論文提出一個具有多重輸入的熱電能量獵取系統以降低所需的硬體複雜度並使其達到較高時間使用效率,此系統架構實現於 0.18-μm CMOS 製程。搭配所建議具有高時間效率且以責任週期為根基的最大功率擷取策略,其阻抗調整範圍可從5 Ω 到10 Ω。由於結合電感器共享機制與雙向轉換器兩種技巧,能量擷取電路與調節電路可以整合成單一級電路,而且並不犧牲功率轉換效率與功率輸出力。其峰值轉換效率達到58.5%,而在儲存電容充飽電荷的情形下,最大的輸出功率值可高達32.4mW。 A multiple-input thermoelectric energy harvesting system implemented in a 0.18-μm CMOS technology is proposed to reduce hardware complexity and achieve time efficiency. With the proposed time-efficient duty-cycle based strategy for the maximum power extraction, the impedance adjustment covers from 5 Ω to 10 Ω. Due to the combined techniques about inductor sharing and the bidirectional converter, the harvesting- and regulating-stage circuits can be implemented into a single-stage circuit, without sacrificing power conversion efficiency (PCE) and output power capability. The peak PCE achieves at 58.5%, and the maximum output power capability can be larger than 32.4-mW while the storage capacitor is fully charged. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/18679 |
全文授權: | 未授權 |
顯示於系所單位: | 電子工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-103-1.pdf 目前未授權公開取用 | 8.09 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。