請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/18489
標題: | 應用移相技術之60GHz無線通訊發送機 60GHz Outphasing Transmitter for Wireless Communication |
作者: | Chiro Kao 高金龍 |
指導教授: | 李致毅 |
關鍵字: | 60-GHz,相移技術,正交振幅調變,毫米波前端電路, CMOS,efficiency,linearization,60 GHz,millimeter-wave,LINC,outphasing transmitter,single-level,multilevel,asymmetric multilevel,transformer,power amplifier,power combiner, |
出版年 : | 2014 |
學位: | 碩士 |
摘要: | 有別於以往改善功率放大器的轉換效率而使用的相移技術,本論文中設計模擬與以65奈米互補式金氧半製程實作60GHz發射機,使用改良型相移技術來增加其轉換效率,並且在提升轉換效率的同時,又保有相當佳的線性度。
此晶片大小為1.02 與在直流供電1.2V下,294 mW的靜態直流功率消耗,並有16.7-dBm的最大輸出功率與16% 的轉換效率。在基頻的四種調變比較下,三個切換直流偏壓的模態在2.5-Gb/s 16-QAM(正交振幅調變)訊號的資料傳輸速度下可達到22.4 dB的誤差向量幅度,並且有12.1-dBm 的平均輸出功率與142 mW 的直流功率消耗,因此可達成11.4% 的平均轉換效率。 This thesis presents the analysis, design, and implementation of a 60-GHz outphasing transmitter with different modulations such as conventional outphasing, multilevel outphasing and asymmetric multilevel outphasing in 65-nm bulk CMOS. The transmitter is optimized for high output power and peak power-added efficiency (PAE) while maintaining sufficient linearity. The chip occupies an area of 1.02 and consumes 294 mW from a 1.2-V supply voltage, delivering 16.7-dBm linear output power with 16% PAE (PA). Comparison among four different modes demonstrate that it achieves a 2.5-Gb/s 16QAM three-level modulation with 12.1-dBm average output power, 142 mW DC consumption and 11.4% average efficiency (TX) at an EVM of 22.4 dB. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/18489 |
全文授權: | 未授權 |
顯示於系所單位: | 電子工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-103-1.pdf 目前未授權公開取用 | 4.45 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。