請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/16953
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 林新智 | |
dc.contributor.author | Hsiang-Yu Wang | en |
dc.contributor.author | 王翔宇 | zh_TW |
dc.date.accessioned | 2021-06-07T23:50:49Z | - |
dc.date.copyright | 2014-03-08 | |
dc.date.issued | 2014 | |
dc.date.submitted | 2014-01-25 | |
dc.identifier.citation | 1. H. Epstein, J. Chipman, N.J. Grant, Met. Trans., Vol 9, 1957, p597
2. N.N. Kolgatin, Zavodskaya Laboratoriya, Vol 9, 1957, p1098 3. T.C. Poulter and L. Uffelman, Physics, Vol 3, 1932, p147 4. M. Martin, C. Gommel, C. Borkhart, E. Fromm, Journal of Alloys and Compounds Vol 238, 1996, p193-201 5. S. M. Myers, M. L. Baskes, H. K. Brinbaum, J.W. Corbett, G. G. Deleo,S. K. Estreicher, E. E. Haller, P. Jena, N. M. Johnson, R. Kirchheim,S. J. Pearton, M. J. Stavola, Rev. Mod. Phys 64, 1992, p559 6. J. Bockris, Annu. Rev. Phys. Chem. Vol 5, 1954, p477–500 7. J. Bockris, Chem. Rev. Vol43, 1943, p525–577 8. J. Bockris, E. Potter, The Journal of Chemical Physics Vol 20, 2004, p614 9. H. Flitt, J. Bockris, Int. J. Hydrogen Energy Vol6, 1981, p119–138 10. A.I. Kovalev, D.L. Wainstein, V.P. Mishina, Surface Phenomena Researches Group, Moscow V.V. Zabilsky, Physical Technical Institute, Russia, Effect of Residual Stress on Hydrogen Embrittlement and Stress Corrosion Cracking, in: G. Totten, M. Howes, T. Inoue (Eds.). Handbook of Residual Stress and Deformation of Steel, 2002, p70-86 11. E. Martin, Arch. Eisenhu‥ttenwes, Vol 3, 1929–1930, p403 12. A. Pundt, R. Kirchheim, Annu. Rev. Mater. Res. Vol36, 2006, p555–608 13. W. Geller and T.H. Sun, Arch. Eisenhuttenwes, Vol 21, 1950, p423 14. E. Martin, Arch. Eisenhu‥ttenwes, Vol 3, 1929–1930, p403 15. A. Sieverts et al, Z. Phys. Chem., Vol 183, 1938, p19 16. L. Luckemeyer-Hasse, H. Schenk, Arch. Eisenhuttenwes, Vol 5, 1932–1933, p 209 17. W. Eichenbauer, H. Kunzig, A. Pebler, Z. Metallkd, Vol 49, 1958, p220–225 18. M.Z. Hill, E.W. Johnson, Trans. AIME, Vol 221, 1961, p622–629 19. Th. Heumann, D. Primas, and Z. Naturforschung,Vol A-212, 1966, p260–269 20. V.I. Saly, R.A. Riabov, and P.V. Geld, Fiz Met. Metalloved., Vol 35, 1973, p 119–122 21. H. Schenk and K.W. Lang, Arch. Eisenhuttenwes, Vol 37, 1966, p739–744 22. J.R.G. Da Silva, S.W. Stafford, and R.B. McLellan, J. Less-Common Met., Vol 49, 1976, p407–420 23. J.R.G. Da Silva and R.B. McLellan, J.Less-Common Met., Vol 50, 1976, p1–5 24. T.N. Stross and F.C. Tomkins, Chem.Abstr., Vol 50, 1956, p230 25. W. Eichenauer et al., Z. Metallkd., Vol 49, 1958, p220 26. E.W. Johnson and M.L. Hill, J. Met., Vol 11, 1959, p 572 27. A.E. Schuetz and W.D. Robertson, Corrosion,Vol 13, 1957, p 437 28. R.C. Frank, J. Appl. Phys., Vol 29, 1958, p 892 29. M. Smialowski, Neue Hu‥tte, Vol 10, 1957, p 621 30. J. Hobson, J. Iron Steel Inst., Vol 189, 1958, p 315 31. H.I. Read, Reinhold, N.Y., 1961, p213 32. G. M. Pressouyre, Met. Trans., Vol14A, 1983, p2189 33. G. M. Pressouyre, I. M. Bernstein, Acta Metall., Vol27, 1979, p89 34. G. M. Pressouyre, Acta Metall., Vol28, 1980, p895 35. Motomichi Koyama, Eiji Akiyama, Kaneaki Tsuzaki, Corrosion Science Vol54, 2012, p1-4 36. T. Toh, W. M. Baldwin, NewYork, 1956, p326 37. J. K. Tien, A. W. Thompson, I. M. Bernstein and R. J. Richards, Met. Trans., Vol7A, 1976, p821 38. H. K. Birnbaum, AIME, NewYork, 1979, p326 39. A.Brown, C.L.Jones, Corrosion, 1984, p330 40. MASAMICHI KOWAKA and SABURO NAGATA, Corrosion, Vol 32, No. 10, 1976, p395-401. 41. P. G. Shewmon, Met. Trans., 1976, p279 42. W. H. Johnson: On some remarkable change produced in iron and steel by the action of hydrogen and acids, Proceedings of the Royal Society of London 23, 1875, p168–179 43. H. Vehoff, Hydrogen related material problem, in: Hydrogen in Metals III., Springer Berlin Heidelberg, 1997 44. I. M. Robertson, D. Teter, J. Microsc. Res. Tech. Vol42, 1998, p260 45. D. F. Teter, I. M. Robertson, H. K. Birnbaum, Acta Mater. Vol 49, 2001, p4313–4323 46. B. Makenas, H. Birnbaum, Acta Metall. Vol28, 1980, p979–988 47. A. Troiano, Trans. ASM Vol 52, 1960, p54–80 48. J. Morlet, H. Johnson, A. Troiano, Journal of the Iron and Steel Institute Vol 189, 1958, p37–44 49. M. Whiteman, A. Troiano, Corrosion, Vol 21, 1965, p53–56 50. R. A. Oriani, P. H. Josephic, Acta Metall. Vol 27, 1979, p997–1005 51. R. Oriani, Acta Metall.Vol 18, 1970, p147–157 52. H. A. Wriedt, R. A. Oriani, Acta Metall.Vol 18, 1970, p753–760 53. R. Oriani, Ber. Bunsenges. Phys. Chem Vol 76, 1972, p848–857 54. R. Oriani, P. Josephic, Acta Metall. Vol 22, 1974, p1065–1074 55. J. Li, R. Oriani, L. Darken, Zeitschrift fur Physikalische Chemie Neue Folge Vol 49, 1966, p271–290 56. G. Pressouyre, Acta Metall. Vol 28, 1980, p895–911 57. C. J. McMahon, Eng. Fract. Mech. Vol 68, 2001, p773–788 58. R. Oriani, Corrosion Vol 43, p390–397 59. R. Gangloff, Hydrogen Assisted Cracking of High Strength Alloys in: Comprehensive Structural Integrity, vol. 6, 2003, pp. 31–101 60. H. Vehoff, W. Rothe, Acta Metall. Vol 31, 1983, p1781–1793 61. R. Oriani, Corrosion Vol 43, 1987, p390–397 62. W. Gerberich, R. Oriani, Philos. Mag. Vol 63, 1991, p363–376 63. T. Matsumoto, J. Eastman, Scr. Metall. Vol 15, 1981, p1033–1037 64. I. M. Robertson, H. K. Birnbaum, Acta Metall. Vol 34, 1986, p353–366 65. H. K. Birnbaum, P. Sofronis, Mater. Sci. Eng., Vol 176, 1994, p191–202 66. I. M. Robertson, D. Teter, J. Microsc. Res. Tech. Vol 42, 1998, p260 67. P. J. Ferreira, I. M. Robertson, H. K. Birnbaum, Acta Mater. Vol 46, 1998, p1749–1757 68. P. J. Ferreira, I. M. Robertson, H. K. Birnbaum, Acta Mater Vol 47, 1999, p2991 69. I. M. Robertson, Eng.Fract. Mech. Vol 68, 2001, p671–692 70. D. F. Teter, I. M. Robertson, H. K. Birnbaum, Acta Mater. Vol 49, 2001, p4313–4323 71. P. Ferreira, I. Robertson, H. Birnbaum, Mater. Sci.Forum, Vol 207, 1995, p93–96 72. D. Abraham, C. Altstetter, Metallurgical and Materials Transactions A Vol 26, 1995, p2859–2871 73. W. McInteer, A. W. Thompson, I. M. Bernstein, Acta Metall. Vol 28, 1980, p887 74. X. Tang, A. W. Thompson, Mater. Sci. Eng.,A Vol 186, 1994, p113–119 75. C. Beachem, Metall. Trans. Vol 3, 1972, p437–451 76. S. X. Xie, J. P. Hirth, Mater. Sci. Eng. Vol 60, 1983, p207–212 77. J. Eastman, F. Heubaum, T. Matsumoto, H. K. Birnbaum, Acta Metall. Vol 30, 1982, p1579–1586 78. A. Kimura, H. K. Birnbaum, Scr. Metall. Vol 21, 1987, p53–57 79. M.M. Shved, Change of Operating Properties of Iron and Steel under Hydrogen Action, Naukova dumka, Kiev, 1985 (in Russian) 80. A.Ye. Andreykiv, V.V. Panacjuk, and V.S.Charin, Fiz. Met. Metalloved., (No. 3), 1978, p 3–23 (in Russian) 81. K. Oniki, Kinzoku, Vol 46 (No. 4), 1976,p 15–18 82. L.M. Bilyi and M.M. Shved, Fiz. Met. Metalloved. (No. 6), 1978, p106–107 (in Russian) 83. 黃振賢,熱處理總論:金屬熱處理,新文京開發出版有限公司 92年 84. R. Pandmanabhan, W. E. Wood, Materials Science and Engineering, Vol 65, 1984, p289-297 85. M. G. H. Wells, Acta Met., Vol 12, 1964, p389 86. G. R. Speich, Trans. TSM-AIME, Vol 245, 1969, p2553 87. C. S. Robert, Trans. Met. Soc. Of AIME, Vol 197, 1953, p203 88. Yu. A. Bagaryatski, Dokl. Akad. Nauk, SSSR, Vol 73, 1950, p1161 89. R. L. Rickett and J. M. Hodge, Proc. ASTM, 1951, p931 90. L. F. Porter, Metallurgical Factors Affecting Toughness, Asm Seminar, Houston. Texas, 1969 91. G. R. Speich,W. C. Lesile, Trans. ASM, Vol 3, 1972, p1043 92. J. F. Newman, L. L. SHreir, Jist, Vol 207, 1969, p1369 93. Y. Sakamoto, T. Mantani, Trans. of JIM, Vol 17, 1976, p734 94. S. L. I. Chan, Phd. D. Thesis, University of Cambridge, 1985 95. M. I. Luppo, J. OVEJERO-GARCIA, Corrosion Science, Vol. 32, No. 10., 1991 p1125-1136. 96. Fu-Gao Wei, Kaneaki Tsuzaki, Scripta Materialia Vol 52, 2005, p467-472 97. T. Asaoka, Pergamon Press, 1982, pp197 98. B. D. Craig and G. Krauss, Met. Tras., Vol 11A, 1980, pp1799 99. K. Yoshino and C. J. McMahon, Jr., Met. Trans., Vol 5, 1974, pp363 100. C. L. Briant, H. C. Feng, C. J. McMahon, Jr., Met. Trans., Vol 9A, 1978, pp625 101. R. Viswanathan, S. T. Hudak, Jr. Met. Trans., Vol 8A, 1977, p1635 102. N. Bandyopadhyay, Jun kameda, C. J. McMahon, Met. Trans., Vol 14A, 1983, p881 103. S.K. Kim, J.S. Kim, and N.J. Kim, Metall. Mater. Trans. A, vol 33A, 2002, p701–704. 104. G. F. Melloy, P. R. Slimmon, P. P. Podgursky, Met. Trans, vol 4, 1973, pp2279 105. N.E. Hannerz, Trans Iron Steel Inst Jpn. Vol 25, 1985, pp149. 106. J. J Jonas and I. Weiss, Metals Sci., Vol 13 ,1979, p 238 – 245. 107. J. D. Jones and A. B. Rothwell, Controlled Rolling of Low-Carbon Niobium-Treated Mild Steels, Proc. Deformation under Hot Working Conditions, ISI Publication 108,London 1968, p.78-82, 100-102 108. A. J. De Ardo, Modern Thermomechanical Processing of Microalloyed Steel: A Physical Metallurgy Perspective, Proc, Conf. Microalloying ’95, Pittsburgh June 1995,Iron & Steel Soc. pp.15 – 33 109. Tomoyuki YOKOTA, Tetsuo SHIRAGA, ISIJ International, Vol. 43, No. 4, 2003, p534-538 | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/16953 | - |
dc.description.abstract | 15B30為硼系麻田散鐵超高強度鋼,雖然具有強度與硬化能高之優點,在結構鋼與汽車鋼板應用上有傑出的表現,但在實際應用上發現超高強度鋼容易受到氫脆破壞之影響。本實驗研究目標為建立氫脆破壞之評估方法以及抑制15B30超高強度鋼氫脆之方法,包括微合金元素之添加和熱處理程序。15B30在經過水淬後強度高達2000MPa,但延伸率只有4%,在回火處理後延性上升至6到7%。本實驗以化學強制充氫拉伸作為評估氫脆破壞之方法,在進行化學充氫30分鐘後,最大抗拉強度損失率高達70%,在經過回火熱處理後發現200℃回火具有較好的抗氫脆能力,其原因為ε碳化物的析出在板條內部,提供氫捕集位置,而300℃和400℃由於雪明碳鐵大量析出在原沃斯田鐵晶界以及板條介面上形成連續的雪明碳鐵,在氫含量高的狀態下,氫聚集於雪明碳鐵與基材的界面反而使材料更容易發生穿晶或沿晶破壞。600℃的回火使材料變態為肥粒鐵,充氫拉伸試驗發現破斷面上只有周圍存在小面積的穿晶破壞,並且其最大抗拉強度損失率只有2%,具有優良的氫脆抵抗能力。而從定應力拉伸發現添加釩元素的15B30V存活時間較15B30高,由此可知添加釩元素在淬火的狀態下會提高材料抵抗氫脆之能力。 | zh_TW |
dc.description.abstract | 15B30 steel, one kind of ultra-high strength boron steel, is prone to hydrogen embrittlement in practical usage. The aim of this research is to build up an evaluation method of hydrogen embrittlement and to improve hydrogen embrittlement by micro-alloy element addition and appropriate heat treatment. After water quenching, the tensile strength of 15B30 could reach 2000MPa with a low elongation about 4%. Tempering process decreases specimen strength but increases the elongation up to 6%. To evaluate the hydrogen embrittlement in this research, the specimens are subjected tensile test instantly after chemical hydrogen charging. The percentage loss of UTS after hydrogen charging for water quenched 15B30 is about 70%. Among various tempering processes at different temperatures, 200℃ tempering is found to promote effectively the resistance of hydrogen embrittlement. This feature is ascribed to that the ε precipitates in the martensite lath can provide hydrogen trapping sites. However, 300℃ and 400℃ tempering make specimens prone to hydrogen embrittlement due to the formation of cementite along the prior austenite grain boundary and the martensite lath interface. The ferrite recrystallization after 600℃ tempering exhibits an excellent hydrogen embrittlement resistance and hence has a lower percentage loss of UTS. Constant load test shows that vanadium addition improves effectively the hydrogen embrittlement of 15B30 steel because the 15B30V steel could sustain a longer fracture time during the testing. | en |
dc.description.provenance | Made available in DSpace on 2021-06-07T23:50:49Z (GMT). No. of bitstreams: 1 ntu-103-R00527070-1.pdf: 16656775 bytes, checksum: b97b94d26ba7fc91430e43637dca87a2 (MD5) Previous issue date: 2014 | en |
dc.description.tableofcontents | 誌謝 II
摘要 III Abstract IV 圖目錄 IX 表目錄 XIV 第一章 前言 1 第二章 文獻回顧 2 2-1 氫與鋼鐵的交互作用 2 2-1-1 氫的來源 2 2-1-3 氫進入材料的方式 2 2-1-4 氫存在材料中的形式和位置 3 2-1-5 氫溶解度(hydrogen solubility)及捕集(hydrogen trapping)位置 4 2-1-6 氫對鋼鐵機械性質的改變 8 2-1-7 氫對材料的破壞形態 10 2-2 氫脆 12 2-2-1 氫脆現象 12 2-2-2 氫脆機制 13 2-2-3 延遲破壞 17 2-3 鋼鐵熔煉及分類 20 2-3-1 熔煉 20 2-3-2 鋼鐵的分類 21 2-3-2 碳鋼熱處理所生成的組織 22 2-4 回火麻田散鐵 28 2-4-1 回火麻田散鐵微觀組織 28 2-4-2回火麻田散鐵的氫含量 33 2-4-3 回火麻田散鐵的氫捕集位置 34 2-4-4 回火麻田散鐵組織的氫脆敏感性 35 2-5 微合金元素添加 36 2-5-1 硼合金元素添加 36 2-5-2 釩合金元素添加 38 第三章 實驗步驟 39 3-1 實驗流程 39 3-2 15B30及15B30V 40 3-3 熱處理 42 3-4 硬度試驗 43 3-5 氫含量分析 43 3-6 拉伸試驗 44 3-7 氫脆試驗 46 3-8 定應力拉伸試驗 47 3-9 顯微組織觀察 48 第四章 結果與討論 50 4-1 回火熱處理之分析 50 4-1-1 DSC-TGA分析 50 4-1-2 硬度試驗 51 4-1-3 金相 52 4-2拉伸試驗 54 4-2-1 空氣中拉伸結果 54 4-2-2 充氫拉伸結果 55 4-3 破斷面觀察 62 4-4 定應力拉伸試驗 72 4-5 TEM觀察 78 第五章 結論 85 第六章 參考文獻 87 | |
dc.language.iso | zh-TW | |
dc.title | 釩添加對硼系超高強度鋼之氫脆性質研究 | zh_TW |
dc.title | Hydrogen Embrittlement of Vanadium-added Ulra High Strength Boron Steel | en |
dc.type | Thesis | |
dc.date.schoolyear | 102-1 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 楊哲人,薛人愷,蔡履文,黃慶淵 | |
dc.subject.keyword | 氫脆,超高強度鋼,回火麻田散鐵, | zh_TW |
dc.subject.keyword | hydrogen embrittlement,ultra high strength steel,tempered martensite, | en |
dc.relation.page | 92 | |
dc.rights.note | 未授權 | |
dc.date.accepted | 2014-01-27 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-103-1.pdf 目前未授權公開取用 | 16.27 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。