請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/15533
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 莊東漢 | |
dc.contributor.author | Wen-Hua Chang | en |
dc.contributor.author | 張文華 | zh_TW |
dc.date.accessioned | 2021-06-07T17:47:33Z | - |
dc.date.copyright | 2013-07-03 | |
dc.date.issued | 2013 | |
dc.date.submitted | 2013-06-21 | |
dc.identifier.citation | [1]. M. Juergen Wolf, Gunter Engelmann, Lothar Dietrich, Herbert Reichl, 'Flip chip bumping technology-Status and update',Nuclear Instruments and Methods in Physics Research A 565(2006)290-295,
[2]. R. Kiumi, S. Takeda, J. Yoshioka, F. Kuriyama, N. Saito, 'Composition Control for Lead-Free Alloy Electroplating on Flip Chip Bumping',2005 Electronic Components and Technology Conference, [3]. Yi Qin,a,b, G. D. Wilcox,and Changqing Liu, 'Electrodeposition and Characterization of Eutectic Sn-Ag Alloy as Solder Bumps for Flip-Chip Interconnection',Journal of The Electrochemical Society,156(10)D424-D430,2009, [4]. Yoshihiro Yoneda1, Toshiyuki Kuramochi1, Tsuyoshi Sohara1 and Jae-Min Liao, 'A Novel Flip Chip Bonding Technology using Au Stud Bump and Lead-free Solder' [5]. Gi-Tae Lim , Byoung-Joon Kim , Kiwook Lee , Jaedong Kim , Young-Chang Joo , and Young-Bae Park, 'Effect of Isothermal Aging on Intermetallic Compounds and Kirkendall' ,Met. Mater. Int., Vol. 15, No. 5 (2009), pp. 819~823 [6]. W. Reinert, T. Harder, 'Performance of the Stud Bump Bonding (SBB) Process in Comparison toSolder Flip Chip Technology',IEEE (2000) [7]. Shinji Ishikawa, Tomoyuki Uchiyama, Eiji Hashino, Taro Kohno, Masamoto Tanaka and Kohei Tatsumi, 'Lead-free Solder Micro-Ball Bumps for the Next Generation of Flip Chip Interconnection:Micro-Ball Materials,Bump Formation Process and Reliability',2007 Electronic Components and Technology Conference [8]. Craig Mitchell,'Assembly and Reliability Sutdy for the Micro-Ball Grid Array',1994 IEEE Electonics Manufacturing Technology Symopsium [9].Kenji Shimokawa, Eiji Hashino,Yoshio Ohzeki, and Kohei Tatsumi, 'Micro-ball Bump for Flip Chip Interconnections', 1998 Electronic Components and Technology Conference [10]. Eiji Hashino, Kenji Shimokawa, Yukihiro Yamamoto and Kohei Tatsumi, 'Micro-Ball Wafer Bumping for Flip Chip Interconnection', 2001 Electronic Components and Technology Conference [11]. Y. H. Lin ,Frank Kuo, Y.F. Chen,C.S.Ho, J.Y. Lai, Stan Chen, F.L. Chien, Rick Lee, and John Lau,'Low-Cost and Fine-Pitch Micro-Ball Mounting Technology for WLCSP', 2012IEEE [12]”錫銀銅合金添加Ce無鉛銲錫球格陣列構裝之動態疲勞評估”,國立台灣大學,鄭智元博士論文 [13]. S. Kemethmuller, R. Dohle, J. Pohlner, Th. Dunne and J. Gosler, 'Reliability of 100 μm Bi- and In- Solder Balls' [14]. Kohei Tatsumi, Yukihiro Yamamoto, Keiji Iwata, Eiji Hashino, Shinji Ishikawa and Taro Kohno, 'An Application of Micro-ball Wafer Bumping to Double Ball Bump for Flip Chip Interconnection', 2005 Electronic Components and Technology Conference [15]. Shinchi Terashima, Yoshiharu Kariya, Takuya Hosoi, and Masamoto Tanka ,'Effect of Silver Content on Thermal Faatigue Life of Sn-xAg-0.5Cu Flip Chip Interconnects',Journal of ELECTRONIC MATERIALS,Vol.32, No. 12.2003 [16]. Q. Yu, Masaki Shiratori,“Thermal Fatigue Reliability Assessment for Solder Joints of BGA Assembly'Proceeding of International Conference on Interpack’99, ASME, EEP-Vol. 26, No.1, pp. 239-246, 1999. [17]. Ahmer Syed , Joan Scanlan , SeWoong Cha , WonJoon Kang , EunSook Sohn , TaeSeong Kim , and ChangGyun Ryu, 'Impact of Package Design and Materials on Reliability for Temperature Cycling', 2008 Electronic Component and Technology Conference [18]. Yi-Shao Lai, Senior Member, IEEE, Tong Hong Wang, and Chang-Chi Lee,' Thermal-Mechanical Coupling Analysis for Coupled Power- and Thermal-Cycling Reliability of Board-Level Electronic Packages', IEEE TRANSACTIONS ON DEVICE AND MATERALS RELIABILITY, VOL. 8, NO. 1, MARCH 2008 [19]. S. Shetty, V. Lehtinen, A. Dasgupta, V. Halkola, T. Reinikainen, Transactions of the ASME,' Fatigue of Chip Scale Package Interconnects Due to Cyclic Bending' [20]. J.D. Wu *, S.H. Ho, C.Y. Huang, C.C. Liao, P.J. Zheng, S.C. Hung,' Board leval reliability of a stacked CSP subjected to cyclic bendng', Microelectronics Reliability 42(2002) [21]. F.X. Che*1, H.L.J. Pang2, W.H. Zhu1 and Anthony Y. S. Sun,'Cyclic Bend Fatigue Reliability Investigation for Sn-Ag-Cu Solder Joints', 2006 Electronics Packaging Technology Conference [22]. Lai Yi-Shao,Chiu Ying-Ta, Lee Chiu-Wen'Electromigration Reliability of 96.5Sn-3Ag-0.5Cu Flip-Chip Solder Joints With Au/Ni/Cu or Cu Substrate Pad Metallization',Journal of Electronic Packaging, [23]. A. Schubert, R. Dudek, H. Walter, E. Jung, A. Gollhardt, B. Michel, H. Reichl,' Reliability Assessment of Flip Chip Assemblies with Lead-free Solder Joints', 2002 Electronic Components and Technology Conference [24]. Haluk Balkan, Deborah Patterson, Guy Burgess, Craig Carlson, Peter Elenius, Michael Johnson, Brian Rooney, Joseph Sanchez, David Stepniak, Jim Wood,'Flip-Chip Reliability: Comparative Characterization of Lead Free(Sn/Ag/Cu) and 63Sn/Pb Eutectic Solder', 2002 Electronic Components and Technology Conference [25]. J.D. Wu *, P.J. Zheng, C.W. Lee, S.C. Hung, J.J. Lee, 'A study in flip-chip UBM/bump reliability with effects of SnPb solder composition', Microelectronics Reliability 46(2006)41-52 [26]. Yi-Shao Lai, Ying-Ta Chiu, and Chin-Li Kao'A Comparison Study of Electromigration Performance of Pb-free Flip Chip Solder Bumps', 2009Electronic Components and Technology Conference, [27].T.Y.Lee,K.N.Tu,and D.R.Frear'Electromigration of eutectic SnPb and SnAg3.8Cu0.7 flip chip solder bumps and under-bump metallization',2001 American Institute of Physics, [28].Ming-Yi Tsai, Member, IEEE, C. H. Jeter Hsu, and C. T. Otto Wang,'Investigation of Thermomechanical Behaviors of Flip Chip BGA Packages During Manufacturing Process and Thermal Cycling', IEEE Transactions on components and packaging technologies, Vol.27, No. 3, 2004 [29]. A. Schubert, R. Dudek, H. Walter, E. Jung, A. Gollhardt, B. Michel, H. Reichl,' Reliability Assessment of Flip-Chip Assemblies with Lead-free Soler Joints', 2002 Electronic Components and Technology Conference [30]. '電子構裝結構分析',徐祥禎 [31]. ”覆晶凸塊技術(Flip Chip Bumping Technology”,工程材料139期,87年7月,p.155,孔令臣 [32]. '平面顯示器概論',高立圖書有限公司. (2008), 莊東漢, 黃漢邦, 謝國煌, 蔡豐羽, 陳炳宏與鄭晃忠 [33]. ”超微細錫球及其在覆晶組裝之應用”,鄭智元、王彰盟、張文華、莊東漢,電子材料2012/12月號 [34]. Hyeon Hwang, Soon-Min Hong, Jae-Pil Jung, Choon-Sik Kang,10-16,'Pb-free solder bumping for flip chip package by electroplating',Soldering & Surface Mount Technology 2003 [35]. Ming-Hsien Caleb Li, Abbas Al-Refaie, and Cheng-Yu Yang,' DMAIC Approach to Improve the Capability of SMT Solder Printing Process, IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING, VOL. 31, NO. 2, APRIL 2008' [36]. Hyoung-Joon Kim, Jong-Soo Cho, Yong-Jin Park, Jin Lee and Kyung-Wook Paik, 'Effects of Pd Addition on Au Stud Bumps/Al Pads Interfacial', Journal of ELECTRONIC MATERIALS, Vol. 33, No. 10, 2004 [37]. ITRI advanced package technology & roadmap seminar (2004-07) [38]. Kejun Zeng, Vesa Vuorinen, and Jorma K. Kivilahti, 'Interfacial Reactions Between Lead-Free SnAgCu Solder and Ni(P) Surface Finish on Printed Circuit Boards', IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING, VOL. 25,NO.3,JULY2002 [39].Jeong-Won Yoon, Bo-In Noh, and Seung-Boo Jung'Comparison of Interfacial Stability of Pb-Free Solders (Sn–3.5Ag, Sn–3.5Ag–0.7Cu, and Sn–0.7Cu) on ENIG-Plated Cu During Aging', IEEE Transactions on components and packaging technologies, VOL. 33, NO. 1, MARCH 2010 [40]. A. Zribi, A.Clark, L.Zavalij, P. Borgesen, and E.J. Cotts' The Growth of Intermetallic Compounds at Sn-Ag-Cu Solder/Cu and Sn-Ag-Cu Solder/Ni Interfaces and the Associated Evolution of the Solder Microstructure ', Journal of Electronic Materials, Vol.30, No. 6,2001, [41].M.N. Islam, Ahmed Sharif, and Y.C. Chan,' Effect of Volume in Interfacial Reaction between Eutectic Sn-3.5% Ag-0.5% Cu Solder and Cu Metallization in Microelectronic Packaging ', Journal of ELECTRONIC MATERIALS, Vol. 34, No. 2, 2005 [42] J.S. Ha, T.S. Oh, K.N. Tu,J. , 'Effect of supersaturation of Cu on reaction and intermetallic compound formation between Sn–Cu solder and thin film metallization' , Mater. Res.Vol 18, No. 9, Sep 2003 [43]. D.R. Frear, J.W. Jang, J.K. Lin, and C. Zhang,'Pb-Free Solders for Flip-Chip Interconnects', JOM-June2001 [44]. Young-Doo Jeon and Kyung-Wook Paik, 'Studies on Ni-Sn Intermetallic Compound and P-rich Ni Layer at the Electroless Nickel UBM -Solder Interface and Their Effects on Flip Chip Solder Joint Reliability', 2001 Electronic Components and Technology Conference [45] W.H. Zhong, Y.C. Chan, M.O. Alam, B.Y. Wu , J.F. Guan,” Effect of multiple processes on the reliability of ball grid array (BGA) solder joints”, Journal of Alloys and Compounds 414(2006) 123-130 [46] F. ZHANG,1,2 M. LI,1,4 C.C. CHUM,1 and Z.C. SHAO, “Effects of Substrate Metallization on Solder/Under-Bump Metallization Interfacial Reactions in Flip-Chip Package during Multiple Reflow Cycles”, Journal of ELECTRONIC MATERIALS, Vol. 32, No. 3, 2003 [47] K.S. Kima , S.H. Huha, K. Suganuma, ”Effects of intermetallic compounds on properties of Sn-Ag-Cu lead-free soldered joints”, Journal of Alloys and Compounds 352(2003)226-236 [48] A. ZRIBI,A. CLARK,L. ZAVALIJ,P. BORGESEN, and E.J. COTTS A. ZRIBI,A.CLARK“The Growth of Intermetallic Compounds at Sn-Ag-Cu Solder/Cu and Sn-Ag-Cu Solder/Ni Interfaces and the Associated Evolution of the Solder Microstructure”,Journal of ELECTRONIC MATERIALS,Vol. 30, NO. 6,2001, [49]”覆晶封裝市場及科技潮流”,2013/3,Yole Developpement | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/15533 | - |
dc.description.abstract | 隨著高階應用跟輕薄型的電子產品蓬勃發展,產品內部構造比以往更加的密集與複雜化,近年來晶圓等級的高密度封裝技術正積極發展中。
微細錫球微凸塊為晶圓封裝技術未來應用的主流之一,作為電子產品中覆晶連線的凸塊可避開傳統製程的缺點,能有效的增加I/O數、縮小間距、簡化製程與降低成本,對於應用在晶圓等級的高密度封裝及具有發展潛力與優勢。 本研究包含微細錫球的製造、植球之界面反應、覆晶組裝之微結構觀察,並分別以微小負荷動態疲勞試驗與冷熱循環試驗針對微細錫球覆晶組裝之可靠度進行分析。以Sn-3Ag-0.5Cu與Sn-0.7Cu兩種微細錫球(90μm)作為覆晶凸塊的種類,與不同表面處理之基板(ENIG、OSP)進行覆晶組裝,組合為可靠度試驗的四種樣品。透過分析四組覆晶組裝樣品的疲勞壽命與破壞特徵,結果顯示動態疲勞試驗與冷熱循環的結果是一致,證實動態疲勞試驗可應用在電子產品的可靠度測試。相較於冷熱循環試驗,動態疲勞試驗不僅可簡化可靠度試驗過程還可以大幅縮短試驗時間,並達到相同的可靠度趨勢。 | zh_TW |
dc.description.abstract | In recent years, the development trend of electronic products gets higher order application, and the internal structure of products is more intense than ever. High density packaging technology of wafer level is a positive development.
Micro solder ball used in wafer level package technology is a trend for the future applications. Using micro solder ball as bump of flip-chip can avoid the disadvantage of the traditional methods; it can effectively increase the number of I/Os, narrow bumping pitch, provide a low cost and high reliability method to the advanced packages, and be applied in high density packaging of wafer level with development potential and advantages. This research includes micro solders ball manufacturing, ball placement process and the interfacial reactions of flip-chip assembly. Using dynamic fatigue test and thermal cycle test to analysis reliability of micro solder ball flip-chip assembly. Use Sn-3Ag-0.5Cu and Sn-0.7Cu alloys as micro solder balls (90 μ m) of flip chip bumping, assemble these balls to different surface treatment substrates (ENIG, and OSP),and then test their reliability. Through analyses the fatigue life and failure modes of four flip-chip assembly sample, dynamic fatigue test results are consistent with the results of thermal cycles test. It confirms that dynamic fatigue tests can be applied to the reliability test of electronic products. In contrast to the thermal cycles test, dynamic fatigue tests not only simplify the process of reliability test, but also significantly reduce testing time and achieve the same reliability trends. | en |
dc.description.provenance | Made available in DSpace on 2021-06-07T17:47:33Z (GMT). No. of bitstreams: 1 ntu-102-R00527030-1.pdf: 5066636 bytes, checksum: 9bf2ea9983c7d7627a4b8223308669eb (MD5) Previous issue date: 2013 | en |
dc.description.tableofcontents | 摘 要 i
Abstract ii 目 錄 iii 圖目錄 iv 表目錄 vii 第一章 緒論 1 1-1. 前言 1 第二章 理論與文獻回顧 4 2-1. 電子構裝的發展 4 2-2. 覆晶凸塊製程 5 2-3. 微細錫球的發展及應用 6 2-4. 電子元件可靠度測試 8 2-5.可靠度分析基本理論 10 第三章 實驗方法與步驟 24 3-1. 研究內容簡介 24 3-2. 微細錫球製作 25 3-3. 微細錫球植球與多次迴銲 25 3-4. 覆晶組裝 26 3-5.可靠度試驗 28 第四章 結果與討論 43 4-1. 微細錫球多次迴銲之界面反應 43 4-2. 覆晶組裝之微結構分析 48 4-3. 覆晶組裝之可靠度分析 58 4-3-1. 微小負荷動態疲勞分析 58 4-3-2. 冷熱循環可靠度分析 68 第五章 結論 74 參考文獻 76 | |
dc.language.iso | zh-TW | |
dc.title | 超微細錫球覆晶組裝之可靠度分析 | zh_TW |
dc.title | Reliability Analyses of Flip Chip Assembly
with Micro-Solder Balls | en |
dc.type | Thesis | |
dc.date.schoolyear | 101-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 謝慧霖,王彰盟,鄭智元,黃振東 | |
dc.subject.keyword | 覆晶組裝,微細錫球,可靠度分析,動態疲勞試驗,界面反應, | zh_TW |
dc.subject.keyword | flip-chip assembly,micro solder balls,reliability analysis,dynamic fatigue testing,interface reaction, | en |
dc.relation.page | 81 | |
dc.rights.note | 未授權 | |
dc.date.accepted | 2013-06-21 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-102-1.pdf 目前未授權公開取用 | 4.95 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。