請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/15416
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 鄧茂華(Mao-Hua Teng) | |
dc.contributor.author | Tung-Ta Chiang | en |
dc.contributor.author | 江通達 | zh_TW |
dc.date.accessioned | 2021-06-07T17:40:27Z | - |
dc.date.copyright | 2020-09-02 | |
dc.date.issued | 2020 | |
dc.date.submitted | 2020-07-30 | |
dc.identifier.citation | [1] M. Tomita, Y. Saito, and T. Hayashi, “LaC2 encapsulated in graphite nano-particle”, Jap. J. Appl. Phys., 1993, 32, L280-282. [2] R. S. Ruoff, D.C. Lorents, R. Malhotra and S. Subramoney, “Single crystal metals encapsulated in carbon nanoparticles”, Science, 1993, 259, 602-604. [3] H. Yuan, F. Yan, C. Li, C. Zhu, X. Zhang, and Y. Chen, “Nickel nanoparticle encapsulated in few-layer nitrogen-doped graphene supported by nitrogen-doped graphite sheets as high-performance electromagnetic wave absorbing material”, ACS Appl. Mater. Interfaces., 2017, 10, 1399-1407. [4] X.G. Liu, B. Li, D.Y. Geng, W. B. Cui, F. Yang, Z.G. Xie, and Z.D. Zhang, “(Fe, Ni)/C nanocapsules for electromagnetic-wave-absorber in the whole Ku-band”, Carbon, 2009, 47(2), 470-474. [5] Xiaoqin Guo, Zhongyi Bai2, Biao Zhao1, Rui Zhang, Jingbo Che, 'Microwave absorption properties of CoNi nanoparticles anchored on the reduced grapheme oxide', Mater Election(2016) 7:8408-8415. [6] P. Tartaj, M. del Puerto Morales, S. Veintemillas-Verdaguer, T. González-Carreño, and C.J. Serna, “The preparation of magnetic nanoparticles for applications in biomedicine”, J. Phys. D: Appl. Phys., 2003, 36(13), R182. [7] J.J. Host, M.H. Teng, B.R. Elliott, J. H. Hwang, T.O. Mason, D.L. Johnson, and V.P. Dravid, “Graphite encapsulated nanocrystals produced using a low carbon: metal ratio”, J. Mater. Res., 1996, 12(5), 1268-1273. [8] C.C. Chiu, J.C. Lo, and M.H. Teng, “A novel high efficiency method for the synthesis of graphite encapsulated metal (GEM) nanoparticles”, Diam. Relat. Mater., 2012, 24, 179-183. [9] 李雱雯(2013)“以退火改善石墨包裹奈米鐵晶粒之包裹良率”,碩士論文,國立臺灣大學地質科學系,共75頁。 [10] 黃郁傑(2018)“以電弧法合成石墨包裹鎳奈米晶粒並探討有機物熱裂解反應對產物之影響研究”,碩士論文,國立臺灣大學地質科學系,共129頁。 [11] C. Kittel (2004). Introduction to solid state physics (8th edition). U.S.A.: John Wiley Sons. [12] C.M. Lai and S.L Lee, “Novel effects and applications of nanometer materials”, Chemistry (The Chinese Chem. Soc., Taipei), 2003, 61(4), 585-597. [13] C. Kittel (2004). Introduction to solid state physics (8th edition). U.S.A.: John Wiley Sons. [14] C.M. Lai and S.L Lee, “Novel effects and applications of nanometer materials”, Chemistry (The Chinese Chem. Soc., Taipei), 2003, 61(4), 585-597. [15] A.S. Edelstein and R.C. Cammarata (1998). Nanomaterials: Synthesis, properties, and applications. Boca Raton, U.S.A.: CRC Press. [16] U. Schubert and N. Hüsing (2012). Synthesis of inorganic materials (3rd edition). Weinheim, Germany: Wiley-VCH. [17] A.S. Edelstein and R.C. Cammarata (1998). Nanomaterials: Synthesis, properties, and applications. Boca Raton, U.S.A.: CRC Press. [18] C.M. Lai and S.L Lee, “Novel effects and applications of nanometer materials”, Chemistry (The Chinese Chem. Soc., Taipei), 2003, 61(4), 585-597. [19] R. Kubo, “Electronic properties of metallic fine particles I”, J. Phys. Soc. Jpn., 1965, 17(6), 975-986. [20] A. Kolhatkar, A. Jamison, D. Litvinov, R. Willson, and T. Lee, “Review: tuning the magnetic properties of nanoparticles”, Int. J. Mol. Sci., 2013, 14, 15977-16009. [21] H.W. Kroto, J.R. Heath, S.C. O'Brien, R.F. Curl, and R.E. Smalley, “C60: Buckminsterfullerene”, Nature, 1985, 318,162-163. [22] W. Krätschmer, L.D. Lamb, K. Fostiropoulos, and D.R. Huffman, “Solid C60: a new form of carbon”, Nature, 1990, 347, 354-358. [23] V.P. Dravid, J.J. Host, M.H. Teng, B.E.J. Hung, D.L. Johnson, T.O. Mason, and J.R. Weertman, “Controlled-size nanocapsules”, Nature, 1995, 602. [24] B.R. Elliott, J.J. Host, V.P. Dravid, M.H. Teng, and J.H. Hwang, “A descriptive model linking possible formation mechanisms for graphite encapsulated nanocrystals to processing parameters”, J. Mater. Res., 1997, 12(12), 3328-3344. [25] C.G. Granqvist and R.A. Buhrman, “Ultrafine metal nanoparticles”, J. Appl. Phys., 1976, 47 (5), 2200-2216. [26] D.A. Porter and K.E. Easterling (2004). Phase transformations in metals and alloys (2nd edition). Boca Raton, U.S.A.: CRC press. [27] M. Tomita, Y. Saito, and T. Hayashi (1993), “LaC2 encapsulated in graphite nano-particle”, Jap. J. Appl. Phys. Vol. 32, pp. L 280-L282 [28] C. Guerret-Piecourt, Y. Lebouar, H. Pascard (1994) “Relation between metal electronic structure and morphology of metal compounds inside carbon nanotubes” Nature, Vol. 372, No. 6508, pp. 761 [29] S. Seraphin, D. Zhou, J. Jiao, M. Minke and S. Wang (1994) “Catalytic role of nickel, palladium, and platinum in the formation of carbon nanoclusters” Chem. Phys. Lett., Vol. 217, pp. 191 [30] S. Seraphin, D. Zhou, and J. Jiao (1996) “Filling the carbon nanocages” J. Appl. Phys., Vol. 40, pp. 2097-2104 [31] Y. Saito, M, Okuda, T, Yoshikawa, A, Kasuya, and Y. Nishina, 'Correlation between volatility of rare-earth metals and encapsulation of their carbides in carbon nanocapsules', J. Phys. Chem., 1994, 98(27), 6696-6698. [32] B.R. Elliott, J.J. Host, V.P. Dravid, M.H. Teng, and J.H. Hwang, “A descriptive model linking possible formation mechanisms for graphite encapsulated nanocrystals to processing parameters”, J. Mater. Res., 1997, 12(12), 3328-3344. [33] M. Singleton and P. Nash, “The C-Ni (Carbon-Nickel) system”, Bull. Alloy Phase Diagr., 1989, 10(2), 121-126. [34] T. J. Konno and R. Sinclair, “Crystallization of amorphous carbon in carbon-cobalt layered thin films”, Acta. Metall. Mater., 1995, 43(2), 471-484. [35] T. J. Konno and R. Sinclair, “Crystallization of amorphous carbon in carbon-cobalt layered thin films”, Acta. Metall. Mater., 1995, 43(2), 471-484. [36] J. J. Host (1997) “Arc Synthesis And Magnetic Properties of Graphite Encapsulated Nanocrystals ”, Dissertation for Ph. D, Northwestern University [37] B. R. Elliot, J. J. Host, V. P. Dravid, M. H. Teng, J. H. Hwang (1997) “A descriptive model linking possible formation mechanisms for graphite encapsulated nanocrystals to processing parameters”, J. Mater. Res., Vol. 12, pp. 3328-3333 [38] 邱志成(2012)“以高合成效率的製程方法合成石墨包裹奈米鐵、鈷、鎳以及銅晶粒之初步研究”,碩士論文,國立臺灣大學地質科學系,共105頁。 [39] 呂睿晟(2011)“非鐵磁性石墨包裹奈米晶粒合成方法之初步研究”,碩士論文,國立臺灣大學地質科學系,共80頁。 [40] S.R. Chung, K.W. Wang, M.H. Teng, and T.P. Perng, “Electrochemical hydrogenation of nanocrystalline face-centered cubic Co powder”, Int. J. Hydrog. Energy., 2009, 34(3), 1383-1388. [41] R. Fuhrer, I.K. Herrmann, E.K. Athanassiou, R.N. Grass, and W.J. Stark, “Immobilized β-cyclodextrin on surface-modified carbon-coated cobalt nanomagnets: reversible organic contaminant adsorption and enrichment from water”, Langmuir, 2011, 27(5), 1924-1929. [42] P. Tartaj, M. del Puerto Morales, S. Veintemillas-Verdaguer, T. González-Carreño, and C.J. Serna, “The preparation of magnetic nanoparticles for applications in biomedicine”, J. Phys. D: Appl. Phys., 2003, 36(13), R182. [43] E. Yang, H. Chou, S. Tsumura, and M. Nagatsu, “Surface properties of plasma-functionalized graphite-encapsulated gold nanoparticles prepared by a direct current arc discharge method”, J. Phys. D: Appl. Phys., 2016, 49, 185304. [44] X.G. Liu, B. Li, D.Y. Geng, W. B. Cui, F. Yang, Z.G. Xie, and Z.D. Zhang, “(Fe, Ni)/C nanocapsules for electromagnetic-wave-absorber in the whole Ku-band”, Carbon, 2009, 47(2), 470-474. [45] 張麗娟(1999)“石墨包裹奈米鎳晶粒的純化分離效果初步研究”,碩士論文,國立臺灣大學地質科學系,共140頁。 [46] 蔡敦皓(2018)“在電弧系統中透過催化分解苯蒸氣合成石墨包裹奈米金屬顆粒”,碩士論文,國立臺灣大學地質科學系,共121頁。 [47] 張麗娟(1999)“石墨包裹奈米鎳晶粒的純化分離效果初步研究”,碩士論文,國立臺灣大學地質科學系,共140頁。 [48] 李尚實(2015)“石墨包裹奈米鐵晶粒的純化及表面改質程序之研究”,博士論文,國立臺灣大學地質科學系,共153頁。 [49] 蕭崇毅(2006)“合成石墨包裹奈米金屬晶粒製程中熔融金屬內碳原料變化之初步研究”,碩士論文,國立臺灣大學地質科學系,共87頁。 [50] 羅仁傑(2010)“石墨包裹奈米鐵晶粒的合成方法改進研究:石墨坩堝設計”,碩士論文,國立臺灣大學地質科學系,共71頁。 [51] 許舜婷(2016)“輸入微量液態碳源對合成石墨包裹奈米鎳晶粒及電弧型態轉變之研究”,碩士論文,國立臺灣大學地質科學系,共75頁。 [52] I. Prigogine and I. Stengers (2018). Order out of chaos: Men’s new dialogue with nature (reprint edition). London, England: Verso Books. [53] 鄭啟煇(2002)“用電弧法在甲烷與氦氣混合氣體中合成石墨包裹奈米鎳晶粒的初步結果”,碩士論文,國立臺灣大學地質科學系,共69頁。 [54] 蔡少葳(2007)“石墨包裹奈米鎳晶粒的緻密化之初步研究”,碩士論文,國立臺灣大學地質科學系,共75頁。 [55] 林宏益(2016)“電弧法合成石墨包裹奈米鎳晶粒-使用不同含碳量之液態碳源對於包裹良率變化的研究”,碩士論文,國立臺灣大學地質科學系,共79頁。 [56] 蕭淵隆(2010)“甲醇之蒸散速率效應對石墨包裹奈米鎳晶粒緻密化之研究”,碩士論文,國立臺灣大學地質科學系,共76頁。 [57] 陳永得(2006)“以人造鑽石及噴氣式電弧法合成石墨包裹奈米鐵晶粒之初步結果”,碩士論文,國立臺灣大學地質科學系,共88頁。 [58] C.C. Chiu, J.C. Lo, and M.H. Teng, “A novel high efficiency method for the synthesis of graphite encapsulated metal (GEM) nanoparticles”, Diam. Relat. Mater., 2012, 24, 179-183. [59] S.S. Li, C.C. Chiu, R.W. Chang, Y.H. Liou, and M.H. Teng, “Synthesis and properties of modified graphite encapsulated iron metal nanoparticles”, Diam. Relat. Mater., 2016, 63, 153-158. [60] 林春長(2002)“石墨包裹奈米鈷晶粒之純化研究”,碩士論文,國立臺灣大學地質科學系,共126頁。 [61] S.S. Lee and M.H. Teng, “Dispersion of graphite encapsulated nickel nanoparticles in a NP-9 colloidal system”, Diam. Relat. Mater., 2011, 20, 183-186. [62] S.S. Li, C.C. Chiu, R.W. Chang, Y.H. Liou, and M.H. Teng, “Synthesis and properties of modified graphite encapsulated iron metal nanoparticles”, Diam. Relat. Mater., 2016, 63, 153-158. [63] 汪建民(2014),材料分析(第二版),中國材料科學學會。 [64] B.D. Cullity and S.R. Stock (2001). Elements of X-ray Diffraction (3rd edition). New Jersey, U.S.A.: Prentice Hall. [65] P. Tartaj, M. del Puerto Morales, S. Veintemillas-Verdaguer, T. González-Carreño, and C.J. Serna, “The preparation of magnetic nanoparticles for applications in biomedicine”, J. Phys. D: Appl. Phys., 2003, 36(13), R182. [66] S.R. Chung, K.W. Wang, M.H. Teng, and T.P. Perng, “Electrochemical hydrogenation of nanocrystalline face-centered cubic Co powder”, Int. J. Hydrog. Energy., 2009, 34(3), 1383-1388. [67] C.B. Alcock, V.P. Itkin, M.K. Horrigan(1984), Canadian Metallurgical Quarterly. [68] P.D. Desai, J. Phys Chem Ref Data 15, 967 (1986) [69] C. B. Alcock,V. P. Itkin M. K. Horrigan(2013).Vapour Pressure Equations for the Metallic Elements: 298–2500K. [70] T.B. Massalski, H. Okamoto, P.R. Subramanian, L. Kacprzak(1990). Binary Alloy Phase Diagrams, 2nd Edition. [71] R. Taylor, G.J. Langley, H.W. Kroto, and D.R. Walton “Formation of C60 by pyrolysis of naphthalene”, Nature, 1993, 366(6457), 728. [72] Supapan Seraphin, Dan Zhou, and Jun Jiao. 'Filling the carbon nanocages', Journal of Applied Physics, 1996,83(2442). [73] Barabash, O.M. and Koval. Yu.N. (1986) The Crystal Structure of Metals and Alloys. Sciences, Kiev, Dumka. [74] Swartzendruber L J. Itkin V P. Alcock C B. Phase Diagrams of Binary Nickel Alloy.1991. [75] S. Kawasumi, M. Egashira, and H. Katsuki, “Catalytic Formation of Graphite from benzene on iron powder”, J. Catal., 1981, 68(1), 237-241. [76] Singleton M F, Murray J L., Nash P. Phase diagrams of Nickel Alloys, 1991. [77] M.V. Frolov, D.V. Knyazeva, N.L. Manakov, J.-W. Geng, L.-Y. Peng, A.F. Starace, 'Analytic model for the description of above-threshold ionization by an intense short laser pulse', Phys. Rev. A, 89 (2014), p. 063419. [78] A.P. Rudenko and B.A. Kazanskii, “Heterogeneous-catalytic course of benzene pyrolysis reactions”, Doklady Akademii Nauk SSSR, 1959, 128(1), 99-102. [79] U. Narkiewicz, M. Podsiadly, R. Jedrzejewski, I. Pelech, 'Catalytic decomposition of hydrocarbons on cobalt, nickel and iron catalysts to obtain carbon nanomaterials' Appl. Catal. A, 384 (2010), pp. 27-35 [80] R.N. Pease and J.M. Morton, “Kinetics of dissociation of typical hydrocarbon vapors 1”, J. Am. Chem. Soc., 1933, 55(8), 3190-3200. [81] K. Bolton and J.E. Cullingworth, “Ghosh, BP, and Cobb”, J. Chem. Soc, 1942, 252. [82] C.T. Brooks, S.J. Peacock, and B.G. Reubne, “Pyrolysis of benzene”, J. Chem. Soc., Faraday Trans., 1979, 75, 652-662. [83] H.J. Singh and R.D. Kern, “Pyrolysis of benzene behind reflected shock waves”, Combust. flame, 1983, 54(1-3), 49-59. [84] H. Wang and M. Frenklach, “A detailed kinetic modeling study of aromatics formation in laminar premixed acetylene and ethylene flames”, Combust. flame, 1997, 110(1-2), 173-221. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/15416 | - |
dc.description.abstract | 石墨包裹金屬奈米顆粒(graphite encapsulated metal nanoparticles, GEM)為一種核殼奈米複合材料,其內核為金屬,外殼為石墨層,其穩定的石墨層耐酸蝕,抗氧化,能保護內核金屬不受環境影響而生存在極端環境,使被包裹之金屬可以展現其特性而被應用在諸多領域,其中,以石墨包裹鐵奈米顆粒能應用於生醫領域、微波吸收以及環境工程等等,其應用領域最廣,然其良率與產率卻未及石墨包裹鎳奈米顆粒。 1997年Elliott等人提出二步驟機制(Two-Step Mechanism)為目前較能合理解釋以電弧法合成GEM顆粒之機制,而隨碳源之改良,石墨包裹金屬奈米顆粒之良率亦也提升,其中苯蒸氣法為能提升包裹良率亦不易斷弧之方式,然良率達80%後卻遇到瓶頸,因此本研究為提升良率,分析鐵金屬特性,及苯蒸氣法影響良率之因素,將合成石墨包裹金屬奈米顆粒之合併區分為高溫合併區與低溫合併區,推論苯蒸氣從低溫合併區向高溫合併區擴散時,碳蒸氣有逐漸下降而不足之現象。因此為提升碳蒸氣量,使用複合碳源,苯蒸氣法,及沸點低且容易熱裂解的固態碳源萘於坩堝,當電弧撞擊時,受高溫熱裂解之萘能從高溫合併區向低溫合併區,能提升合併區之碳蒸氣量,分別使內核為鐵與鎳之顆粒的良率提升至88%及92%,突破良率之侷限。 而隨GEM的使用率的增加,內核為非鐵磁性金屬及合金之顆粒貢獻亦也增加,本研究利用複合碳源製備成功首例以電弧法合成石墨包裹鋁奈米顆粒,突破容易形成碳化物之瓶頸,為研究上的一大突破,其次,合成內核為鐵鎳、鋁鎳合金之顆粒,顯示出鎳之優良催化效果能提升顆粒之包裹良率。 最後,以複合碳源苯與萘建立模型,建立碳蒸氣濃度在合併區之分布,並將合併區分為高溫合併區與低溫合併區,使顆粒產生石墨層之方式,前者以相分離為主,後者以催化機制為主,其中催化機制分為二步驟機制之催化,及金屬催化碳氫化合物在金屬表面上斷鍵並產生石墨。 | zh_TW |
dc.description.abstract | Graphite Encapsulated Metal (GEM) nanoparticles are core-shell composite-structured nano-materials with an inner core of metal and outer shells of graphite layers. Because of the protection of the stable graphite shell which can resist against acid erosion and oxidation, the internal metal can be preserved in server environment and exhibited its characteristics. It has wide application especially for graphite encapsulated iron (Fe-GEM) nanoparticles, for example, wastewater treatment, bio-technology and microwave absorber. However, the production rate and encapsulation efficiency of Fe-GEM is not as high as graphite encapsulated nickel (Ni-GEM) nanoparticles. In 1997 years, Elliott et al., proposed the most fundamental mechanism, Two-Step Mechanism, to explain the detail synthesis process. The encapsulation efficiency and production rate of GEM is affected by the sufficient and uniform carbon vapor in the coalescence area. However, to reach good vapor environment is not easy because of metal vapor, catalysis ability and metal carbide which decisively influences the result. From the result of Encapsulation efficiency of Fe-GEM and Ni-GEM, discussing the factor of iron and limitation of benzene is necessary that benzene can’t diffuse into high temperature coalescence area because of high molecular weight and air convection. To improve the carbon vapor distribution, adding the solid carbon resource, naphthalene, in crucible to enhance the carbon vapor in high temperature coalescence area is valid to raise encapsulation efficiency to 88% and 92% for inner core of iron and nickel respectively. Also, graphite encapsulated aluminum nanoparticles which is support unable to produce because of carbide is successful made. It shows the necessary of excess and uniform carbon vapor in metal vapor. According to the result. It is supported to establish the forming graphite or carbon soot of high temperature coalescence area, phase segregation domain, and low temperature coalescence area, catalytic domain. This procedure is expected to establish a preliminary concept to provide the foundation for more in-depth materials science research in the future. | en |
dc.description.provenance | Made available in DSpace on 2021-06-07T17:40:27Z (GMT). No. of bitstreams: 1 U0001-2607202016563600.pdf: 6971218 bytes, checksum: 741c458001ff664c7ec55333b429c9ab (MD5) Previous issue date: 2020 | en |
dc.description.tableofcontents | 致謝 i 中文摘要 iii Abstract v 目錄 vii 圖目錄 x 表目錄 xiv 第一章 緒論 1 1.1 研究動機與目的 1 1.2 研究方法 2 1.3 本文內容 3 第二章 文獻回顧 5 2.1 奈米材料(nanomaterials) 5 2.1.1 奈米材料之特性 6 2.1.2 奈米材料常見之合成技術 9 2.1.3 奈米材料之性質 10 2.2 石墨包裹金屬奈米晶粒(GEM) 13 2.2.1 固體碳 C60─巴克球的緣起與發現 13 2.2.2 碳-碳電弧法的發展與發現─石墨包裹金屬奈米顆粒 14 2.2.3 改良式鎢-碳電弧法與石墨包裹金屬奈米顆粒的發展 15 2.3 石墨包裹金屬顆粒的生成機制 17 2.3.1 蒸發凝結法之成核理論與機制 18 2.3.2 合成機制─二步驟機制模型 19 2.3.3 電弧系統下合成石墨包裹金屬奈米顆粒的合併區 25 2.4 石墨包裹金屬顆粒研究與發展 27 2.4.1 電弧真空艙體設計 28 2.4.2 真空艙內之電弧系統設計 29 2.4.3 石墨包裹金屬奈米顆粒之金屬之選擇 34 2.4.4 石墨包裹金屬奈米顆粒之碳源種類與提供方式 37 2.4.5 純化流程之改良 40 第三章 實驗方法與儀器設備介紹 43 3.1 真空電弧蒸發裝置 43 3.1.1 真空艙2號艙之配備 43 3.1.2 電弧系統 46 3.1.3 電源供應系統 48 3.1.4 冷卻系統 49 3.1.5 注入系統 51 3.2 實驗流程 51 3.2.1 實驗前之前置作業 51 3.2.2 實驗時之步驟 53 3.2.3 實驗後之蒐集 55 3.3 使用參數與儀器介紹 56 3.3.1 分析之參數 57 3.3.2 高分辨解析率穿透式電子顯微鏡 59 3.3.3 X光粉末繞射儀 62 第四章 實驗結果與討論 65 4.1 石墨包裹金屬奈米顆粒良率與產率之因素分析 67 4.1.1 以苯蒸氣法分析合成產物 68 4.1.2 影響石墨包裹鐵奈米顆粒之良率因素分析。 72 4.1.3 苯蒸氣之限制 78 4.2 使用複合碳源苯與萘提升碳蒸氣濃度 79 4.2.1 碳蒸氣之均勻度與濃度對產率與良率之因素分析 79 4.2.1 以固態碳源萘與液態碳源苯合成Fe-GEM、Ni-GEM 82 4.3 製備非鐵磁性金屬鋁及合金之GEM 87 4.3.1合成石墨包裹鋁奈米顆粒(Al-GEM) 87 4.3.2 鐵鎳合金 94 4.3.3 鋁鎳合金 99 4.4 研究假設與模型建立 102 4.4.1 電弧區域溫度梯度分佈 102 4.4.2 合併區之區域 107 4.4.3 模型建立 109 第五章 結論與建議 112 參考文獻 116 附錄 實驗數據 122 | |
dc.language.iso | zh-TW | |
dc.title | 在電弧系統中以複合碳源合成石墨包裹金屬奈米顆粒之機制探討 | zh_TW |
dc.title | The Mechanism of the Synthesis of Graphite Encapsulated Metal Nanoparticles with Multiple Carbon Sources in Arc System | en |
dc.type | Thesis | |
dc.date.schoolyear | 108-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 劉雅瑄(Ya-Hsuan Liou),謝文斌(Wen-Pin Hsieh),鄧茂英(Mao-Ying Teng) | |
dc.subject.keyword | 石墨包裹金屬奈米顆粒,合併區,石墨,苯催化,碳氫化合物熱裂解, | zh_TW |
dc.subject.keyword | graphite encapsulated metal nanoparticles,coalescence area,benzene catalysis,pyrolysis of hydrocarbons, | en |
dc.relation.page | 123 | |
dc.identifier.doi | 10.6342/NTU202001868 | |
dc.rights.note | 未授權 | |
dc.date.accepted | 2020-07-30 | |
dc.contributor.author-college | 理學院 | zh_TW |
dc.contributor.author-dept | 地質科學研究所 | zh_TW |
顯示於系所單位: | 地質科學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
U0001-2607202016563600.pdf 目前未授權公開取用 | 6.81 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。